ihs brepress logo bre connect Website

Order BRE books from IHS BRE Press

t: +44 (0) 1344 328038
f: +44 (0) 1344 328005
e: brepress@ihs.com

Online:
www.ihsbrepress.com

 

 

CIS Service Website

Call +44 (0)1344 328300 to discuss your online construction information requirements

Home > Building elements and structures > Cladding

Cladding


Assessing the fire performance of external cladding systems
This test method enables an assessment to be made of the behaviour of non-loadbearing exterior wall assemblies, including external cladding systems, rainscreen overcladding systems, external wall insulation systems and curtain walling when exposed to an external fire. FN9 

Cladding: a bibliography of selected publications and standards 197090
This bibliography lists publications containing proven data and widely accepted methodologies that are of direct use in design of cladding; and publications which support, clarify and extend the established knowledge and to national and international standards relevant to cladding.  BR194 

Insulated external cladding systems
Government policy and rising public awareness of the advantages of reducing greenhouse gas emissions and of saving energy has led to the development of systems and materials which meet these aims. This Guide explains how insulation can be applied to external walls and how to reduce some of the associated technical risks. GG31 

Metal cladding: assessing the thermal performance of built-up systems which use 'Z' spacers
This Paper describes a method for determining the thermal performance of insulated double-skin metal roof and wall systems used in the UK that incorporate Z spacers. It can be used to demonstrate compliance with the 2002 Building Regulations. The method takes account of the thermal bridging caused by the metal connecting paths between inner liner and outer sheet.  IP10/02 

Metal cladding: assessing thermal performance
This paper describes procedures for determining the thermal performance of some types of insulated double-skin metal roof and wall systems commonly used in the UK. The procedures take account of the thermal bridging caused by the various metal connecting paths between inner liner and outer sheet and are more realistic than other simplified methods and provide a more accurate assessment of the thermal performance of such systems. IP5/98 

Reinforced plastics cladding panels
Outlines the materials and moulding techniques used in the manufacture of glass-fibre reinforced plastics cladding panels and compares some of the finished panels with those of other materials. DG161 

The use of glass-reinforced cement in cladding panels
Summarises Report BR49, which reports a survey of the incidence of cracking in service of grc cladding panels at 35 sites. IP5/84 

Wall cladding defects and their diagnosis
Deals with non-loadbearing cladding and gives guidance on spotting latent defects likely to lead to rain penetration or dislodgement. DG217 

Wall cladding: designing to minimise defects due to inaccuracies and movements
Describes the factors influencing rain penetration and dislodgement of non-loadbearing cladding and facings, and the critical points to consider in design. DG223 

Assessing the fire performance of external cladding systems
This test method enables an assessment to be made of the behaviour of non-loadbearing exterior wall assemblies, including external cladding systems, rainscreen overcladding systems, external wall insulation systems and curtain walling when exposed to an external fire. FN9 

Cladding: a bibliography of selected publications and standards 197090
This bibliography lists publications containing proven data and widely accepted methodologies that are of direct use in design of cladding; and publications which support, clarify and extend the established knowledge and to national and international standards relevant to cladding.  BR194 

Insulated external cladding systems
Government policy and rising public awareness of the advantages of reducing greenhouse gas emissions and of saving energy has led to the development of systems and materials which meet these aims. This Guide explains how insulation can be applied to external walls and how to reduce some of the associated technical risks. GG31 

Metal cladding: assessing the thermal performance of built-up systems which use 'Z' spacers
This Paper describes a method for determining the thermal performance of insulated double-skin metal roof and wall systems used in the UK that incorporate Z spacers. It can be used to demonstrate compliance with the 2002 Building Regulations. The method takes account of the thermal bridging caused by the metal connecting paths between inner liner and outer sheet.  IP10/02 

Metal cladding: assessing thermal performance
This paper describes procedures for determining the thermal performance of some types of insulated double-skin metal roof and wall systems commonly used in the UK. The procedures take account of the thermal bridging caused by the various metal connecting paths between inner liner and outer sheet and are more realistic than other simplified methods and provide a more accurate assessment of the thermal performance of such systems. IP5/98 

Reinforced plastics cladding panels
Outlines the materials and moulding techniques used in the manufacture of glass-fibre reinforced plastics cladding panels and compares some of the finished panels with those of other materials. DG161 

The use of glass-reinforced cement in cladding panels
Summarises Report BR49, which reports a survey of the incidence of cracking in service of grc cladding panels at 35 sites. IP5/84 

Wall cladding defects and their diagnosis
Deals with non-loadbearing cladding and gives guidance on spotting latent defects likely to lead to rain penetration or dislodgement. DG217 

Wall cladding: designing to minimise defects due to inaccuracies and movements
Describes the factors influencing rain penetration and dislodgement of non-loadbearing cladding and facings, and the critical points to consider in design. DG223 

Assessing the fire performance of external cladding systems
This test method enables an assessment to be made of the behaviour of non-loadbearing exterior wall assemblies, including external cladding systems, rainscreen overcladding systems, external wall insulation systems and curtain walling when exposed to an external fire. FN9 

Cladding: a bibliography of selected publications and standards 197090
This bibliography lists publications containing proven data and widely accepted methodologies that are of direct use in design of cladding; and publications which support, clarify and extend the established knowledge and to national and international standards relevant to cladding.  BR194 

Insulated external cladding systems
Government policy and rising public awareness of the advantages of reducing greenhouse gas emissions and of saving energy has led to the development of systems and materials which meet these aims. This Guide explains how insulation can be applied to external walls and how to reduce some of the associated technical risks. GG31 

Metal cladding: assessing the thermal performance of built-up systems which use 'Z' spacers
This Paper describes a method for determining the thermal performance of insulated double-skin metal roof and wall systems used in the UK that incorporate Z spacers. It can be used to demonstrate compliance with the 2002 Building Regulations. The method takes account of the thermal bridging caused by the metal connecting paths between inner liner and outer sheet.  IP10/02 

Metal cladding: assessing thermal performance
This paper describes procedures for determining the thermal performance of some types of insulated double-skin metal roof and wall systems commonly used in the UK. The procedures take account of the thermal bridging caused by the various metal connecting paths between inner liner and outer sheet and are more realistic than other simplified methods and provide a more accurate assessment of the thermal performance of such systems. IP5/98 

Reinforced plastics cladding panels
Outlines the materials and moulding techniques used in the manufacture of glass-fibre reinforced plastics cladding panels and compares some of the finished panels with those of other materials. DG161 

The use of glass-reinforced cement in cladding panels
Summarises Report BR49, which reports a survey of the incidence of cracking in service of grc cladding panels at 35 sites. IP5/84 

Wall cladding defects and their diagnosis
Deals with non-loadbearing cladding and gives guidance on spotting latent defects likely to lead to rain penetration or dislodgement. DG217 

Wall cladding: designing to minimise defects due to inaccuracies and movements
Describes the factors influencing rain penetration and dislodgement of non-loadbearing cladding and facings, and the critical points to consider in design. DG223 

Assessing the fire performance of external cladding systems
This test method enables an assessment to be made of the behaviour of non-loadbearing exterior wall assemblies, including external cladding systems, rainscreen overcladding systems, external wall insulation systems and curtain walling when exposed to an external fire. FN9 

Cladding: a bibliography of selected publications and standards 197090
This bibliography lists publications containing proven data and widely accepted methodologies that are of direct use in design of cladding; and publications which support, clarify and extend the established knowledge and to national and international standards relevant to cladding.  BR194 

Insulated external cladding systems
Government policy and rising public awareness of the advantages of reducing greenhouse gas emissions and of saving energy has led to the development of systems and materials which meet these aims. This Guide explains how insulation can be applied to external walls and how to reduce some of the associated technical risks. GG31 

Metal cladding: assessing the thermal performance of built-up systems which use 'Z' spacers
This Paper describes a method for determining the thermal performance of insulated double-skin metal roof and wall systems used in the UK that incorporate Z spacers. It can be used to demonstrate compliance with the 2002 Building Regulations. The method takes account of the thermal bridging caused by the metal connecting paths between inner liner and outer sheet.  IP10/02 

Metal cladding: assessing thermal performance
This paper describes procedures for determining the thermal performance of some types of insulated double-skin metal roof and wall systems commonly used in the UK. The procedures take account of the thermal bridging caused by the various metal connecting paths between inner liner and outer sheet and are more realistic than other simplified methods and provide a more accurate assessment of the thermal performance of such systems. IP5/98 

Reinforced plastics cladding panels
Outlines the materials and moulding techniques used in the manufacture of glass-fibre reinforced plastics cladding panels and compares some of the finished panels with those of other materials. DG161 

The use of glass-reinforced cement in cladding panels
Summarises Report BR49, which reports a survey of the incidence of cracking in service of grc cladding panels at 35 sites. IP5/84 

Wall cladding defects and their diagnosis
Deals with non-loadbearing cladding and gives guidance on spotting latent defects likely to lead to rain penetration or dislodgement. DG217 

Wall cladding: designing to minimise defects due to inaccuracies and movements
Describes the factors influencing rain penetration and dislodgement of non-loadbearing cladding and facings, and the critical points to consider in design. DG223 

Assessing the fire performance of external cladding systems
This test method enables an assessment to be made of the behaviour of non-loadbearing exterior wall assemblies, including external cladding systems, rainscreen overcladding systems, external wall insulation systems and curtain walling when exposed to an external fire. FN9 

Cladding: a bibliography of selected publications and standards 197090
This bibliography lists publications containing proven data and widely accepted methodologies that are of direct use in design of cladding; and publications which support, clarify and extend the established knowledge and to national and international standards relevant to cladding.  BR194 

Insulated external cladding systems
Government policy and rising public awareness of the advantages of reducing greenhouse gas emissions and of saving energy has led to the development of systems and materials which meet these aims. This Guide explains how insulation can be applied to external walls and how to reduce some of the associated technical risks. GG31 

Metal cladding: assessing the thermal performance of built-up systems which use 'Z' spacers
This Paper describes a method for determining the thermal performance of insulated double-skin metal roof and wall systems used in the UK that incorporate Z spacers. It can be used to demonstrate compliance with the 2002 Building Regulations. The method takes account of the thermal bridging caused by the metal connecting paths between inner liner and outer sheet.  IP10/02 

Metal cladding: assessing thermal performance
This paper describes procedures for determining the thermal performance of some types of insulated double-skin metal roof and wall systems commonly used in the UK. The procedures take account of the thermal bridging caused by the various metal connecting paths between inner liner and outer sheet and are more realistic than other simplified methods and provide a more accurate assessment of the thermal performance of such systems. IP5/98 

Reinforced plastics cladding panels
Outlines the materials and moulding techniques used in the manufacture of glass-fibre reinforced plastics cladding panels and compares some of the finished panels with those of other materials. DG161 

The use of glass-reinforced cement in cladding panels
Summarises Report BR49, which reports a survey of the incidence of cracking in service of grc cladding panels at 35 sites. IP5/84 

Wall cladding defects and their diagnosis
Deals with non-loadbearing cladding and gives guidance on spotting latent defects likely to lead to rain penetration or dislodgement. DG217 

Wall cladding: designing to minimise defects due to inaccuracies and movements
Describes the factors influencing rain penetration and dislodgement of non-loadbearing cladding and facings, and the critical points to consider in design. DG223 

Assessing the fire performance of external cladding systems
This test method enables an assessment to be made of the behaviour of non-loadbearing exterior wall assemblies, including external cladding systems, rainscreen overcladding systems, external wall insulation systems and curtain walling when exposed to an external fire. FN9 

Cladding: a bibliography of selected publications and standards 197090
This bibliography lists publications containing proven data and widely accepted methodologies that are of direct use in design of cladding; and publications which support, clarify and extend the established knowledge and to national and international standards relevant to cladding.  BR194 

Insulated external cladding systems
Government policy and rising public awareness of the advantages of reducing greenhouse gas emissions and of saving energy has led to the development of systems and materials which meet these aims. This Guide explains how insulation can be applied to external walls and how to reduce some of the associated technical risks. GG31 

Metal cladding: assessing the thermal performance of built-up systems which use 'Z' spacers
This Paper describes a method for determining the thermal performance of insulated double-skin metal roof and wall systems used in the UK that incorporate Z spacers. It can be used to demonstrate compliance with the 2002 Building Regulations. The method takes account of the thermal bridging caused by the metal connecting paths between inner liner and outer sheet.  IP10/02 

Metal cladding: assessing thermal performance
This paper describes procedures for determining the thermal performance of some types of insulated double-skin metal roof and wall systems commonly used in the UK. The procedures take account of the thermal bridging caused by the various metal connecting paths between inner liner and outer sheet and are more realistic than other simplified methods and provide a more accurate assessment of the thermal performance of such systems. IP5/98 

Reinforced plastics cladding panels
Outlines the materials and moulding techniques used in the manufacture of glass-fibre reinforced plastics cladding panels and compares some of the finished panels with those of other materials. DG161 

The use of glass-reinforced cement in cladding panels
Summarises Report BR49, which reports a survey of the incidence of cracking in service of grc cladding panels at 35 sites. IP5/84 

Wall cladding defects and their diagnosis
Deals with non-loadbearing cladding and gives guidance on spotting latent defects likely to lead to rain penetration or dislodgement. DG217 

Wall cladding: designing to minimise defects due to inaccuracies and movements
Describes the factors influencing rain penetration and dislodgement of non-loadbearing cladding and facings, and the critical points to consider in design. DG223 

Assessing the fire performance of external cladding systems
This test method enables an assessment to be made of the behaviour of non-loadbearing exterior wall assemblies, including external cladding systems, rainscreen overcladding systems, external wall insulation systems and curtain walling when exposed to an external fire. FN9 

Cladding: a bibliography of selected publications and standards 197090
This bibliography lists publications containing proven data and widely accepted methodologies that are of direct use in design of cladding; and publications which support, clarify and extend the established knowledge and to national and international standards relevant to cladding.  BR194 

Insulated external cladding systems
Government policy and rising public awareness of the advantages of reducing greenhouse gas emissions and of saving energy has led to the development of systems and materials which meet these aims. This Guide explains how insulation can be applied to external walls and how to reduce some of the associated technical risks. GG31 

Metal cladding: assessing the thermal performance of built-up systems which use 'Z' spacers
This Paper describes a method for determining the thermal performance of insulated double-skin metal roof and wall systems used in the UK that incorporate Z spacers. It can be used to demonstrate compliance with the 2002 Building Regulations. The method takes account of the thermal bridging caused by the metal connecting paths between inner liner and outer sheet.  IP10/02 

Metal cladding: assessing thermal performance
This paper describes procedures for determining the thermal performance of some types of insulated double-skin metal roof and wall systems commonly used in the UK. The procedures take account of the thermal bridging caused by the various metal connecting paths between inner liner and outer sheet and are more realistic than other simplified methods and provide a more accurate assessment of the thermal performance of such systems. IP5/98 

Reinforced plastics cladding panels
Outlines the materials and moulding techniques used in the manufacture of glass-fibre reinforced plastics cladding panels and compares some of the finished panels with those of other materials. DG161 

The use of glass-reinforced cement in cladding panels
Summarises Report BR49, which reports a survey of the incidence of cracking in service of grc cladding panels at 35 sites. IP5/84 

Wall cladding defects and their diagnosis
Deals with non-loadbearing cladding and gives guidance on spotting latent defects likely to lead to rain penetration or dislodgement. DG217 

Wall cladding: designing to minimise defects due to inaccuracies and movements
Describes the factors influencing rain penetration and dislodgement of non-loadbearing cladding and facings, and the critical points to consider in design. DG223