| BS 5295-0:1989 | Environmental cleanliness in enclosed spaces. General introduction, terms and definitions for clean rooms and clean air devices |
| BS 5295-2:1989 | Environmental cleanliness in enclosed spaces. Method for specifying the design, construction and commissioning of clean rooms and clean air devices |
| BS 5295-3:1989 | Environmental cleanliness in enclosed spaces. Guide to operational procedures and disciplines applicable to clean rooms and clean air devices |
| BS 5295:Part 1:1989 | Environmental cleanliness in enclosed spaces. Specification for clean rooms and clean air devices |
| BS 5295:Part 4:1989 | Environmental cleanliness in enclosed spaces. Specification for monitoring clean rooms and clean air devices to prove continued compliance with BS 5295:Part 1 |
| BS 5343-2:1991 | Gas detector tubes. Specification for long term gas detector tubes |
| BS 5343:Part 1:1986 | Gas detector tubes. Specification for short term gas detector tubes |
| BS 6069-3.1:1989* ISO 8762:1988 | Characterization of air quality. Workplace atmospheres. Method for the determination of vinyl chloride using a charcoal tube and a gas chromatograph |
| BS 6069-3.2:1991* ISO 8518:1990 | Characterization of air quality. Workplace atmospheres. Method for the determination of particulate lead and lead compounds by flame atomic absorption spectrometry |
| BS 6069-3.3:1991* ISO 9486:1991 | Characterization of air quality. Workplace atmospheres. Method for the determination of vaporous chlorinated hydrocarbons by charcoal tube/solvent desorption/gas chromatography |
| BS 6069-3.4:1991* ISO 9487:1991 | Characterization of air quality. Workplace atmospheres. Method for the determination of vaporous aromatic hydrocarbons by charcoal tube/solvent desorption/gas chromatography |
| BS 6691-1:1986 | Fume from welding and allied processes. Guide to methods for the sampling and analysis of particulate matter |
| BS 6691-2:1986 | Fume from welding and allied processes. Guide to methods for the sampling and analysis of gases |
| BS 7989:2001 | Specification for recirculatory filtration fume cupboards |
| BS EN 1076:1997 | Workplace atmospheres. Pumped sorbent tubes for the determination of gases and vapours. Requirements and test methods |
| BS EN 1231:1997 | Workplace atmospheres. Short term detector tube measurement systems. Requirements and test methods |
| BS EN 1232:1997 | Workplace atmospheres. Pumps for personal sampling of chemical agents. Requirements and test methods |
| BS EN 12919:1999 | Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods |
| BS EN 13098:2001 | Workplace atmospheres. Guidelines for measurement of airborne micro-organisms and endotoxin |
| BS EN 13205:2002 | Workplace atmospheres. Assessment of performance of instruments for measurement of airborne particle concentrations |
| BS EN 13890:2002 | Workplace atmospheres. Procedures for measuring metals and metalloids in airborne particles. Requirements and test methods |
| BS EN 14031:2003 | Workplace atmospheres. Determination of airborne endotoxins |
| BS EN 14042:2003 | Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
| BS EN 14530:2004 | Workplace atmospheres. Determination of diesel particulate matter. General requirements |
| BS EN 14583:2004 | Workplace atmospheres. Volumetric bioaerosol sampling devices. Requirements and test methods |
| BS EN 15051:2006 | Workplace atmospheres. Measurement of the dustiness of bulk materials. Requirements and reference test methods |
| BS EN 1540:1998 | Workplace atmospheres. Terminology |
| BS EN 45544-1:2000 | Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. General requirements and test methods |
| BS EN 45544-2:2000 | Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for measuring concentrations in the region of limit values |
| BS EN 45544-3:2000 | Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Performance requirements for apparatus used for measuring concentrations well above limit values |
| BS EN 45544-4:2000 | Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Guide for selection, installation, use and maintenance |
| BS EN 481:1993* BS 6069-3.5:1993 | Workplace atmospheres. Size fraction definitions for measurement of airborne particles |
| BS EN 482:1994* BS 6069-3.6:1994 | Workplace atmospheres. General requirements for the performance of procedures for the measurement of chemical agents |
| BS EN 482:2006 | Workplace atmospheres. General requirements for the performance of procedures for the measurement of chemical agents |
| BS EN 689:1996* BS 6069-3.7:1996 | Workplace atmospheres. Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy |
| BS EN 838:1996 | Workplace atmospheres. Diffusive samplers for the determination of gases and vapours. Requirements and test methods |
| BS EN ISO 10882-1:2001 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of airborne particles |
| BS EN ISO 10882-2:2000 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of gases |
| BS EN ISO 14644-4:2001 | Cleanrooms and associated controlled environments. Design, construction and start-up |
| BS EN ISO 16017-1:2001 | Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Pumped sampling |
| BS EN ISO 16017-2:2003 | Indoor, ambient and workplace air. Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography. Diffusive sampling |
| BS ISO 10551:1995 | Ergonomics of the thermal environment. Assessment of the influence of the thermal environment using subjective judgement scales |
| BS ISO 11041:1996 | Workplace air. Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour. Method by hydride generation and atomic absorption spectrometry |
| BS ISO 11174:1996 | Workplace air. Determination of particulate cadmium and cadmium compounds. Flame and electro-thermal atomic absorption spectrometric method |
| BS ISO 15202-1:2000 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling |
| BS ISO 15202-2:2001 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sample preparation |
| BS ISO 15202-3:2004 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Analysis |
| BS ISO 15767:2003 | Workplace atmospheres. Controlling and characterizing errors in weighing collected aerosols |
| BS ISO 15767:2009 | Workplace atmospheres. Controlling and characterizing uncertainty in weighing collected aerosols |
| BS ISO 16107:1999 | Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers |
| BS ISO 16107:2007 | Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers |
| BS ISO 16200-1:2001 | Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Pumped sampling method |
| BS ISO 16200-2:2000 | Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Diffusive sampling method |
| BS ISO 16702:2001 | Workplace air quality. Determination of total isocyanate groups in air using 2-(1-methoxyphenyl) piperazine and liquid chromatography |
| BS ISO 16702:2007 | Workplace air quality. Determination of total organic isocyanate groups in air using 1-(2-methoxyphenyl) piperazine and liquid chromatography |
| BS ISO 16740:2005 | Workplace air. Determination of hexavalent chromium in airborne particulate matter. Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide |
| BS ISO 17733:2004 | Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| BS ISO 17734-1:2006 | Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry. Isocyanates using dibutylamine derivatives |
| BS ISO 17734-2:2006 | Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry. Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives |
| BS ISO 17735:2009 | Workplace atmospheres. Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl)piperazine (MAP) reagent and liquid chromatography |
| BS ISO 20552:2007 | Workplace air. Determination of mercury vapour. Method using gold-amalgam collection and analysis by atomic absorption spectrometry or atomic fluorescence spectrometry |
| BS ISO 21438-1:2007 | Workplace atmospheres. Determination of inorganic acids by ion chromatography. Non-volatile acids (sulphuric acid and phosphoric acid) |
| BS ISO 8518:2001 | Workplace air. Determination of particulate lead and lead compounds. Flame or electrothermal atomic absorption spectrometric method |
| DD ENV 13936:2001 | Workplace atmospheres. Measurement of chemical agents present as mixtures of airborne particles and vapour. Requirements and test methods |
| PD 6609:1996 | In situ aerosol testing of HEPA filtration. An explanatory supplement to BS 5295:Part 1:1989 |
| PD 6609:2000 | Environmental cleanliness in enclosed spaces. Guide to test methods |
| PD 6609:2007 | Environmental cleanliness in enclosed spaces. Guide to in situ high efficiency filter leak testing |
| PD CEN/TR 15230:2005 | Workplace atmospheres. Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
| PD ISO/TR 17737:2007 | Workplace air. Guidelines for selecting analytical methods for sampling and analyzing isocyanates in air |
| PD ISO/TR 27628:2007 | Workplace atmospheres. Ultrafine, nanoparticle and nano-structured aerosols. Inhalation exposure characterization and assessment |
