| BS 1136:1972 | Specification for mild steel refuse storage containers |
| BS 1703:1977 | Specification for refuse chutes and hoppers |
| BS 1703:2005 | Refuse chutes and hoppers. Specification |
| BS 3107:1973 | Specification for small incinerators |
| BS 3316-1:1987 | Incinerators. Specification for standard performance requirements for incineration plant for the destruction of hospital waste |
| BS 3316-2:1987 | Incinerators. Methods of test and calculation for the performance of incineration plant for the destruction of hospital waste |
| BS 3316-3:1987 | Incinerators. Method for specifying purchasers' requirements for incineration plant for the destruction of hospital waste |
| BS 3316-4:1987 | Incinerators. Code of practice for the design, specification, installation and commissioning of incineration plant for the destruction of hospital waste |
| BS 3495:1972 | Specification for aluminium refuse storage containers |
| BS 3735:1987 | Specification for plastics and rubber dustbin lids |
| BS 3813-1:1964 | Specification for incinerators for waste from trade and residential premises. Capacities between 50 lb/h and 1000 lb/h |
| BS 4998:1985 | Specification for moulded thermoplastics dustbins (excluding lids) |
| BS 5832:1980 | Specification for compacted waste containers for lift-off vehicles |
| BS 5906:1980 | Code of practice for storage and on-site treatment of solid waste from buildings |
| BS 5906:2005 | Waste management in buildings. Code of practice |
| BS 792:1973 | Specification for mild steel dustbins |
| BS EN 12574-1:2002 | Stationary waste containers. Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting devices. Dimensions and design |
| BS EN 12574-1:2006 | Stationary waste containers. Containers with a capacity up to 10000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device. Dimensions and design |
| BS EN 12574-2:2002 | Stationary waste containers. Performance requirements and test methods |
| BS EN 12574-2:2006 | Stationary waste containers. Performance requirements and test methods |
| BS EN 12574-3:2002 | Stationary waste containers. Safety and health requirements |
| BS EN 12574-3:2006 | Stationary waste containers. Safety and health requirements |
| BS EN 13071:2002 | Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste |
| BS EN 13265:2001 | Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects |
| BS EN 13592:2003 | Plastics sacks for household waste collection. Types, requirements and test methods |
| BS EN 13593:2003 | Packaging. Paper sacks for household waste collection. Types, requirements and test methods |
| BS EN 13656:2002 | Characterization of waste. Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3), and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| BS EN 13657:2002 | Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements |
| BS EN 14582:2007 | Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods |
| BS EN 15132:2006 | Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods |
| BS EN 15144:2007 | Winter maintenance equipment. Terminology. Terms for winter maintenance |
| BS EN 840-1:1997 | Mobile waste containers. Containers with two wheels with a capacity from 80 l to 390 l for comb lifting devices. Dimensions and design |
| BS EN 840-1:2004 | Mobile waste containers. Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design |
| BS EN 840-2:1997 | Mobile waste containers. Containers with four wheels with a capacity from 500 l to 1200 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design |
| BS EN 840-2:2004 | Mobile waste containers. Containers with 4 wheels with capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices. Dimensions and design |
| BS EN 840-3:1997 | Mobile waste containers. Containers with four wheels with a capacity from 770 l to 1300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design |
| BS EN 840-3:2004 | Mobile waste containers. Containers with 4 wheels with capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices. Dimensions and design |
| BS EN 840-4:1997 | Mobile waste containers. Containers with four wheels with a capacity from 750 l to 1700 l with flat lid(s), for wide trunnion or BG-and/or wide comb lifting devices. Dimensions and design |
| BS EN 840-4:2004 | Mobile waste containers. Containers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices. Dimensions and design |
| BS EN 840-5:1997 | Mobile waste containers. Performance requirements and test methods |
| BS EN 840-5:2004 | Mobile waste containers. Performance requirements and test methods |
| BS EN 840-6:1997 | Mobile waste containers. Safety and health requirements |
| BS EN 840-6:2004 | Mobile waste containers. Safety and health requirements |
| BS ISO 11599:1997 | Determination of gas porosity and gas permeability of hydraulic binders containing embedded radioactive waste |
| BS ISO 13617:2001 | Ships and marine technology. Shipboard incinerators. Requirements |
| DD ENV 12506:2000 | Characterization of waste. Analysis of eluates. Determination of pH, As, Cd, Cr VI, Cu, Ni, Pb, Zn, Cl-, NO2-, SO4²- |
| PAS 60-1:2004 | Equipment used in the controlled removal of asbestos-containing materials. Controlled wetting of asbestos-containing materials. Specification |
| PAS 60-2:2004 | Equipment used in the controlled removal of asbestos-containing materials. Negative Pressure Units. Specification |
| PAS 60-3:2004 | Equipment used in the controlled removal of asbestos-containing materials. Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice |
| PD CEN/TR 13768:2004 | Characterization of sludges. Good practice for combined incineration of sludges and household wastes |
| PD CEN/TR 14745:2003 | Solid recovered fuels |
| PD CEN/TR 15584:2007 | Characterisation of sludges. Guide to risk assessment especially in relation to use and disposal of sludges |
| PD CR 13768:2001 | Characterization of sludges. Good practice for combined incineration of sludges and household wastes |
