| BS 1134-1:1988 | Assessment of surface texture. Methods and instrumentation |
| BS 1134-2:1990 | Assessment of surface texture. Guidance and general information |
| BS 2634-1:1987* ISO 2632-1:1985 | Roughness comparison specimens. Specification for turned, ground, bored, milled, shaped and planed specimens |
| BS 2634-2:1987* ISO 2632-2:1985 | Roughness comparison specimens. Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens |
| BS 4359-1:1996* ISO 9277:1995 | Determination of the specific surface area of powders. BET method of gas adsorption for solids (including porous materials) |
| BS 4359-2:1982 | Determination of the specific surface area of powders. Recommended air permeability methods |
| BS 4359:Part 1:1984 | Determination of the specific surface area of powders. Recommendation for gas adsorption (BET) methods |
| BS 6393:1987* ISO 5436-1985 | Specification for calibration of stylus instruments |
| BS 6741:Part 1:1987* ISO 4287/1-1984 | Glossary of surface roughness terms. Surface and its parameters |
| BS 6741:Part 2:1987* ISO 4287/2-1984 | Glossary of surface roughness terms. Measurement of surface roughness parameters |
| BS 7079-A3:2002* ISO 8501-3:2001 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of welds, cut edges and other areas with surface imperfections. A3: Preparation grades of welds, cut edges and other areas with surface imperfections |
| BS 7591-1:1992 | Porosity and pore size distribution of materials. Method of evaluation by mercury porosimetry |
| BS 7591-2:1992 | Porosity and pore size distribution of materials. Method of evaluation by gas adsorption |
| BS 7591-4:1993 | Porosity and pore size distribution of materials. Method of evaluation by liquid expulsion |
| BS 7941-2:2000 | Methods for measuring the skid resistance of pavement surfaces. Test method for measurement of surface skid resistance using the GripTester braked wheel fixed slip device |
| BS 8420:2003 | Methods of measuring irregularities on surfaces of roads, footways and other paved areas using straightedges and wedges |
| BS EN 10049:2005 | Measurement of roughness average. Ra and peak count RPc on metallic flat products |
| BS EN 10318:2005 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method |
| BS EN 1071-6:2007 | Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a micro-abrasion wear test |
| BS EN 13036-1:2002 | Road and airfield surface characteristics. Test methods. Measurement of pavement surface macrotexture depth using a volumetric patch technique |
| BS EN 13036-3:2002 | Road and airfield surface characteristics. Test methods. Measurement of pavement surface horizontal drainability |
| BS EN 13036-4:2003 | Road and airfield surface characteristics. Test methods. Method for measurement of slip/skid resistance of a surface. The pendulum test |
| BS EN 13036-7:2003 | Road and airfield surface characteristics. Test methods. Irregularity measurement of pavement courses. The straightedge test |
| BS EN 13523-13:2001 | Coil coated metals. Test methods. Resistance to accelerated ageing by the use of heat |
| BS EN 13523-14:2001 | Coil coated metals. Test methods. Chalking (Helmen method) |
| BS EN 13523-18:2002 | Coil coated metals. Test methods. Resistance to staining |
| BS EN 13523-1:2001 | Coil coated metals. Test methods. Coating thickness |
| BS EN 13523-21:2003 | Coil coated metals. Test methods. Evaluation of outdoor exposed panels |
| BS EN 13523-4:2001 | Coil coated metals. Test methods. Pencil hardness |
| BS EN 13523-5:2001 | Coil coated metals. Test methods. Resistance to rapid deformation (impact test) |
| BS EN 13523-6:2002 | Coil coated metals. Test methods. Adhesion after indentation (cupping test) |
| BS EN 13523-7:2001 | Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test) |
| BS EN 13523-8:2002 | Coil coated metals. Test methods. Resistance to salt spray (fog) |
| BS EN 1370:1997 | Founding. Surface roughness inspection by visual tactile comparators |
| BS EN 14571:2005 | Metallic coatings on nonmetallic basis materials. Measurement of coating thickness. Microresistivity method |
| BS EN 15042-1:2006 | Thickness measurement of coatings and characterization of surfaces with surface waves. Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves |
| BS EN 15042-2:2006 | Thickness measurement of coatings and characterization of surfaces with surface waves. Guide to the thickness measurement of coatings by photothermic method |
| BS EN 15302:2008 | Railway applications. Method for determining the equivalent conicity |
| BS EN ISO 11562:1998 | Geometric product specifications (GPS). Surface texture: Profile method. Metrological characteristics of phase correct filters |
| BS EN ISO 12085:1998 | Geometric Product Specification (GPS). Surface texture. Profile method. Motif parameters |
| BS EN ISO 12179:2001 | Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments |
| BS EN ISO 1302:2002 | Geometrical product specifications (GPS). Indication of surface texture in technical product documentation |
| BS EN ISO 13565-1:1998 | Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Filtering and general measurement conditions |
| BS EN ISO 13565-2:1998 | Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the linear material ration curve |
| BS EN ISO 13565-3:2000 | Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the material probability curve |
| BS EN ISO 1463:1995 | Metallic and oxide coatings. Measurement of coating thickness. Microscopical method |
| BS EN ISO 1463:2004 | Metallic and oxide coatings. Measurement of coating thickness. Microscopical method |
| BS EN ISO 2064:1995 | Metallic and other non-organic coatings. Definitions and conventions concerning the measurement of thickness |
| BS EN ISO 2064:2000 | Metallic and other inorganic coatings. Definitions and conventions concerning the measurement of thickness |
| BS EN ISO 2177:1995 | Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution |
| BS EN ISO 2178:1995 | Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method |
| BS EN ISO 2360:1995* ISO 2360-1982 | Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method |
| BS EN ISO 2360:2003 | Non-conductive coatings on non-magnetic electrically conductive basis materials. Measurement of coating thickness. Amplitude-sensitive eddy current method |
| BS EN ISO 2361:1995 | Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method |
| BS EN ISO 3274:1998 | Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments |
| BS EN ISO 3497:2001 | Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods |
| BS EN ISO 3543:2001 | Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method |
| BS EN ISO 3868:1995 | Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method |
| BS EN ISO 3882:1995 | Metallic and other non-organic coatings. Review of methods of measurement of thickness |
| BS EN ISO 3882:2003 | Metallic and other inorganic coatings. Review of methods of measurement of thickness |
| BS EN ISO 4287:2000 | Geometrical product specification (GPS). Surface texture. Profile method. Terms, definitions and surface texture parameters |
| BS EN ISO 4288:1998 | Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture |
| BS EN ISO 4518:1995 | Metallic coatings. Measurement of coating thickness. Profilometric method |
| BS EN ISO 5436-1:2001 | Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards. Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards |
| BS EN ISO 8502-10:2004* BS 7079-B10:2004 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the titrimetric determination of water-soluble chloride |
| BS EN ISO 8502-2:2000 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces |
| BS EN ISO 8502-3:2000 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| BS EN ISO 8502-4:2000 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Guidance on the estimation of the probability of condensation prior to paint application |
| BS EN ISO 8502-6:2000 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Extraction of soluble contaminants for analysis. The Bresle method |
| BS EN ISO 8502-9:2001* BS 7079-B9:1998 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the conductometric determination of water-soluble salts |
| BS EN ISO 8503-1:1995* BS 7079-C1:1989 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| BS EN ISO 8503-2:1995* BS 7079-C2:1989 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure |
| BS EN ISO 8503-3:1995* BS 7079-C3:1989 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure |
| BS EN ISO 8503-4:1995* BS 7079-C4:1989 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure |
| BS EN ISO 8785:1999 | Geometrical product specification (GPS). Surface imperfections. Terms, definitions and parameters |
| BS EN ISO 9220:1995 | Metallic coatings. Measurement of coating thickness. Scanning electron microscope method |
| BS IEC 61010-3-1:1997 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-1 |
| BS IEC 61336:1996 | Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods |
| BS ISO 1302:1992 | Technical drawings. Method of indicating surface texture |
| BS ISO 4287:1997 | Geometric product specifications (GPS). Surface texture: profile method. Terms, definitions and surface texture parameters |
| DD CEN ISO/TS 12180-1:2007 | Geometrical product specifications (GPS). Cylindricity. Vocabulary and parameters of cylindrical form |
| DD CEN ISO/TS 12180-2:2007 | Geometrical product specifications (GPS). Cylindricity. Specification operators |
| DD CEN/TS 1071-10:2004 | Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by cross section |
| DD ENV ISO 8502-1:2001 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field test for soluble iron corrosion products |
| DD ISO/TR 15969:2001 | Surface chemical analysis. Depth profiling. Measurement of sputtered depth |
| DD ISO/TS 16610-22:2006 | Geometrical product specifications (GPS). Filtration. Linear profile filters. Spline filters |
| DD ISO/TS 16610-29:2006 | Geometrical product specifications (GPS). Filtration. Linear profile filters. Spline wavelets |
| DD ISO/TS 16610-40:2006 | Geometrical product specifications (GPS). Filtration. Morphological profile filters. Basic concepts |
| DD ISO/TS 16610-41:2006 | Geometrical product specifications (GPS). Filtration. Morphological profile filters. Disk and horizontal line-segment filters |
| DD ISO/TS 16610-49:2006 | Geometrical product specifications (GPS). Filtration. Morphological profile filters. Scale space techniques |
| KIT 148 | Surface texture standards kit |
