| BS 3015:1991* ISO 2041:1990 | Glossary of terms relating to mechanical vibration and shock |
| BS 4999-142:1987 | General requirements for rotating electrical machines. Specification for mechanical performance: vibration |
| BS 5228-1:1997 | Noise and vibration control on construction and open sites. Code of practice for basic information and procedures for noise and vibration control |
| BS 5228-2:1997 | Noise and vibration control on construction and open sites. Guide to noise and vibration control legislation for construction and demolition including road construction and maintenance |
| BS 5228-3:1997 | Noise and vibration control on construction and open sites. Code of practice applicable to surface coal extraction by opencast methods |
| BS 5228-5:1997 | Noise and vibration control on construction and open sites. Code of practice applicable to surface mineral extraction (except coal) sites |
| BS 6294:1982* ISO 7096-1982 | Method for measurement of body vibration transmitted to the operator of earth-moving machinery |
| BS 6414:1983* ISO 2017:1982 | Method for specifying characteristics of vibration and shock isolators |
| BS 6472-1:2008 | Guide to evaluation of human exposure to vibration in buildings. Vibration sources other than blasting |
| BS 6632:1985* ISO 4867-1984 | Method for measurement and reporting of shipboard vibration data |
| BS 6633:1985* ISO 4868-1984 | Method for measurement and reporting of local vibration data of ship structures and equipment |
| BS 6749:Part 1:1986* ISO 7919/1-1986 | Measurements and evaluation of vibration on rotating shafts. Guide to general principles |
| BS 6794:1986* ISO 8002-1986 | Method for reporting measured vibration data for land vehicles |
| BS 6864-1:1987* ISO 3822/1-1983 | Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations. Method for measurement |
| BS 6864:Part 2:1987 | Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations. Method for mounting and operating draw-off taps |
| BS 6864:Part 3:1987 | Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations. Method for mounting and operating in-line valves and appliances |
| BS 6864:Part 4:1987 | Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations. Method for mounting and operating special appliances |
| BS 6897-2:1990* ISO 7626-2:1990 | Methods for experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter |
| BS 6897-5:1995* ISO 7626-5:1994 | Experimental determination of mechanical mobility. Measurement using impact excitation with an exciter which is not attached to the structure |
| BS 6955-10:1994* ISO 5347-10:1993 | Calibration of vibration and shock pick-ups. Method for primary calibration by high impact shocks |
| BS 6955-11:1994* ISO 5347-11:1993 | Calibration of vibration and shock pick-ups. Method of test for transverse vibration sensitivity |
| BS 6955-12:1994* ISO 5347-12:1993 | Calibration of vibration and shock pick-ups. Method of test for transverse shock sensitivity |
| BS 6955-13:1994* ISO 5347-13:1993 | Calibration of vibration and shock pick-ups. Method of test for base strain sensitivity |
| BS 6955-14:1994* ISO 5347-14:1993 | Calibration of vibration and shock pick-ups. Method of test for resonance frequency of undamped accelerometers on a steel block |
| BS 6955-15:1994* ISO 5347-15:1993 | Calibration of vibration and shock pick-ups. Method of test for acoustic sensitivity |
| BS 6955-16:1994* ISO 5347-16:1993 | Calibration of vibration and shock pick-ups. Method of test for mounting torque sensitivity |
| BS 6955-17:1994* ISO 5347-17:1993 | Calibration of vibration and shock pick-ups. Method of test for fixed temperature sensitivity |
| BS 6955-18:1994* ISO 5347-18:1993 | Calibration of vibration and shock pick-ups. Method of test for transient temperature sensitivity |
| BS 6955-19:1994* ISO 5347-19:1993 | Calibration of vibration and shock pick-ups. Method of test for magnetic field sensitivity |
| BS 6955-1:1994* ISO 5347-1:1993 | Calibration of vibration and shock pick-ups. Methods for primary vibration calibration by laser interferometry |
| BS 6955-20:1997* ISO 5347-20:1997 | Calibration of vibration and shock pick-ups. Primary vibration calibration by the reciprocity method |
| BS 6955-22:1997* ISO 5347-22:1997 | Calibration of vibration and shock pick-ups. Accelerometer resonance testing. General methods |
| BS 6955-2:1994* ISO 5347-2:1993 | Calibration of vibration and shock pick-ups. Methods for primary shock calibration by light cutting |
| BS 6955-3:1994* ISO 5347-3:1993 | Calibration of vibration and shock pick-ups. Methods for secondary vibration calibration |
| BS 6955-4:1994* ISO 5347-4:1993 | Calibration of vibration and shock pick-ups. Method for secondary shock calibration |
| BS 6955-5:1994* ISO 5347-5:1993 | Calibration of vibration and shock pick-ups. Method for calibration by earth's gravitation |
| BS 6955-6:1994* ISO 5347-6:1993 | Calibration of vibration and shock pick-ups. Method for primary vibration calibration at low frequencies |
| BS 6955-7:1994* ISO 5347-7:1993 | Calibration of vibration and shock pick-ups. Methods for primary calibration by centrifuge |
| BS 6955-8:1994* ISO 5347-8:1993 | Calibration of vibration and shock pick-ups. Method for primary calibration by dual centrifuge |
| BS 6955-9:1994* ISO 5347-9:1993 | Calibration of vibration and shock pick-ups. Method for secondary vibration calibration by comparison of phase angles |
| BS 6955:Part 0:1988* ISO 5347-0:1987 | Calibration of vibration and shock pick-ups. Guide to basic principles |
| BS 7119:1989* ISO 8042:1988 | Specification for shock and vibration measurements: characteristics to be specified for seismic pick-ups |
| BS 7129:1989* ISO 5348:1987 | Recommendations for mechanical mounting of accelerometers for measuring mechanical vibration and shock |
| BS 7285:1990* ISO 8626:1989 | Method for describing characteristics of servo-hydraulic test equipment for generating vibration |
| BS 7385-1:1990* ISO 4866:1990 | Evaluation and measurement for vibration in buildings. Guide for measurement of vibrations and evaluation of their effects on buildings |
| BS 7385-2:1993 | Evaluation and measurement for vibration in buildings. Guide to damage levels from groundborne vibration |
| BS 7439:1991* ISO 9688:1990 | Method for exchange of information for the analytical assessment of shock resistance of mechanical systems |
| BS 7853:1996* ISO 8608:1995 | Mechanical vibration. Road surface profiles. Reporting of measured data |
| BS 7854-1:1996* ISO 10816-1:1995 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. General guidelines |
| BS 7854-2:1996* ISO 10816-2:1996 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Large land-based steam turbine generator sets in excess of 50 MW |
| BS 7854-3:1998* ISO 10816-3:1998 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ |
| BS 7854-4:1998* ISO 10816-4:1998 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Gas turbine driven sets excluding aircraft derivatives |
| BS 7854-6:1996* ISO 10816-6:1995 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Reciprocating machines with power ratings above 100 kW |
| BS EN 1032:1997 | Mechanical vibration. Testing of mobile machinery in order to determine the whole-body vibration emission value. General |
| BS EN 1032:2003 | Mechanical vibration. Testing of mobile machinery in order to determine the vibration emission value |
| BS EN 1033:1996 | Hand-arm vibration. Laboratory measurement of vibration at the grip surface of hand-guided machinery. General |
| BS EN 12096:1997 | Mechanical vibration. Declaration and verification of vibration emission values |
| BS EN 12786:1999 | Safety of machinery. Guidance for the drafting of vibration clauses of safety standards |
| BS EN 1299:1997 | Mechanical vibration and shock. Vibration isolation of machines. Information for the application of source isolation |
| BS EN 15495:2007 | Non-destructive testing. Acoustic emission. Examination of metallic pressure equipment during proof testing. Zone location of AE sources |
| BS EN 30326-1:1994* ISO 10326-1:1992 | Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Basic requirements |
| BS EN 60034-14:1998 | Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration |
| BS EN 60034-14:2004 | Rotating electrical machines. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity |
| BS EN 60994:1993* IEC 60994:1991 | Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines) |
| BS EN 61373:1999* IEC 61373:1999 | Railway applications. Rolling stock equipment. Shock and vibration tests |
| BS EN ISO 10819:1997 | Mechanical vibration and shock. Hand-arm vibration. Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
| BS ISO 10813-1:2004 | Vibration generating machines. Guidance for selection. Equipment for environmental testing |
| BS ISO 10814:1996 | Mechanical vibration. Susceptibility and sensitivity of machines to unbalance |
| BS ISO 10815:1996 | Mechanical vibration. Measurement of vibration generated internally in railway tunnels by the passage of trains |
| BS ISO 10816-2:2001 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| BS ISO 10816-5:2001 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Machine sets in hydraulic power and pumping plants |
| BS ISO 10817-1:1999 | Rotating shaft vibration measuring systems. Relative and absolute sensing of radial vibration |
| BS ISO 13372:2004 | Condition monitoring and diagnostics of machines. Vocabulary |
| BS ISO 13373-1:2002 | Condition monitoring and diagnostics of machines. Vibration condition monitoring. General procedures |
| BS ISO 13373-2:2005 | Condition monitoring and diagnostics of machines. Vibration condition monitoring. Processing, analysis and presentation of vibration data |
| BS ISO 13374-1:2003 | Condition monitoring and diagnostics of machines. Data processing, communication and presentation. General guidelines |
| BS ISO 13374-2:2007 | Condition monitoring and diagnostics of machines. Data processing, communication and presentation. Data processing |
| BS ISO 13379:2003 | Condition monitoring and diagnostics of machines. General guidelines on data interpretation and diagnostics techniques |
| BS ISO 13380:2002 | Condition monitoring and diagnostics of machines. General guidelines on using performance parameters |
| BS ISO 13381-1:2004 | Condition monitoring and diagnostics of machines. Prognostics. General guidelines |
| BS ISO 14695:2003* BS 848-6:2003 | Fans for general purposes. Method of measurement of fan vibration |
| BS ISO 14837-1:2005 | Mechanical vibration. Ground-borne noise and vibration arising from rail systems. General guidance |
| BS ISO 14839-1:2002 | Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Vocabulary |
| BS ISO 14839-2:2004 | Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Evaluation of vibration |
| BS ISO 14839-3:2006 | Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings. Evaluation of stability margin |
| BS ISO 14963:2003 | Mechanical vibration and shock. Guidelines for dynamic tests and investigations on bridges and viaducts |
| BS ISO 14964:2000 | Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration |
| BS ISO 15230:2007 | Mechanical vibration and shock. Coupling forces at the man-machine interface for hand-transmitted vibration |
| BS ISO 15261:2004 | Vibration and shock generating systems. Vocabulary |
| BS ISO 16063-11:1999 | Methods for the calibration of vibration and shock transducers. Primary vibration calibration by laser interferometry |
| BS ISO 16063-12:2002 | Methods for the calibration of vibration and shock transducers. Primary vibration calibration by the reciprocity method |
| BS ISO 16063-13:2001 | Methods for the calibration of vibration and shock transducers. Primary shock calibration using laser interferometry |
| BS ISO 16063-15:2006 | Methods for the calibration of vibration and shock transducers. Primary angular vibration calibration by laser interferometry |
| BS ISO 16063-1:1998 | Methods for the calibration of vibration and shock transducers. Basic concepts |
| BS ISO 16063-21:2003 | Methods for the calibration of vibration and shock transducers. Vibration calibration by comparison to a reference transducer |
| BS ISO 16063-22:2005 | Methods for the calibration of vibration and shock transducers. Shock calibration by comparison to a reference transducer |
| BS ISO 16587:2004 | Mechanical vibration and shock. Performance parameters for condition monitoring of structures |
| BS ISO 17359:2003 | Condition monitoring and diagnostics of machines. General guidelines |
| BS ISO 18431-1:2005 | Mechanical vibration and shock. Signal processing. General introduction |
| BS ISO 18431-2:2004 | Mechanical vibration and shock. Signal processing. Time domain windows for Fourier Transform analysis |
| BS ISO 18431-4:2007 | Mechanical vibration and shock. Signal processing. Shock-response spectrum analysis |
| BS ISO 18434-1:2008 | Condition monitoring and diagnostics of machines. Thermography. General procedures |
| BS ISO 18436-1:2004 | Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. General requirements for certifying bodies and the certification process |
| BS ISO 18436-2:2003 | Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Vibration condition monitoring and diagnostics |
| BS ISO 18437-2:2005 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Resonance method |
| BS ISO 18437-3:2005 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials. Cantilever shear beam method |
| BS ISO 18649:2004 | Mechanical vibration. Evaluation of measurement results from dynamic tests and investigations on bridges |
| BS ISO 2017-1:2005 | Mechanical vibration and shock. Resilient mounting systems. Technical information to be exchanged for the application of isolation systems |
| BS ISO 2017-2:2007 | Mechanical vibration and shock. Resilient mounting systems. Technical information to be exchanged for the application of vibration isolation associated with railway systems |
| BS ISO 21289:2008 | Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data |
| BS ISO 22096:2007 | Condition monitoring and diagnostics of machines. Acoustic emission |
| BS ISO 3046-5:2001 | Reciprocating internal combustion engines. Performance. Torsional vibrations |
| BS ISO 5344:2004 | Electrodynamic vibration generating systems. Performance characteristics |
| BS ISO 5348:1998 | Mechanical vibration and shock. Mechanical mounting of accelerometers |
| BS ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. General guidelines |
| BS ISO 7919-2:1996 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Large land-based steam turbine generator sets |
| BS ISO 7919-2:2001 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| BS ISO 7919-3:1996 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Coupled industrial machines |
| BS ISO 7919-4:1996 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Gas turbine sets |
| BS ISO 7919-5:1997 | Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria. Machine sets in hydraulic power generating and pumping plants |
| BS ISO 7919-5:2005 | Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Machine sets in hydraulic power generating and pumping plants |
| BS ISO 8568:2007 | Mechanical shock. Testing machines. Characteristics and performance |
| DD ENV 28041:1993* ISO 8041:1990 | Human response to vibration. Measuring instrumentation |
| PD 6585-2:1996* CR 1030-2:1995 | Hand-arm vibration. Guidelines for vibration hazards reduction. Management measures at the workplace |
| PD CEN/TR 15172-1:2005 | Whole-body vibration. Guidelines for vibration hazards reduction. Engineering methods by design of machinery |
| PD CEN/TR 15172-2:2005 | Whole-body vibration. Guidelines for vibration hazards reduction. Management measures at the workplace |
| PD IEC/TR 62095:2003 | Electric cables. Calculation of current rating. Cable current rating calculations using finite element method |
