IHS Logo IHS - The Source for Critical Information and Insight BSi Logo
British Standards Online Heading
How to subscribe to British Standards Online
  Need a quote from IHS?
  The British Standards Online service is available via subscription from IHS. To speak to an expert about this service, please call:
+44 (0)1344 328300 or complete the
form below

Request an IHS quote for
British Standards Online
 
IHS Logo

BSi Logo
The following lists the key subject areas for this British Standards module.
Click the links to view the associated British Standards for each area.

Home >
Testing ( Module 10 ) >

Environmental testing , Testing ( Module 10 )
BS 10175:2001Investigation of potentially contaminated sites. Code of practice
BS 2011-2.1Ca:1977* IEC 60068-2-3:1969Environmental testing. Tests. Test Ca. Damp heat, steady state
BS 2011-2.1Cb:1990* IEC 60068-2-56:1988Environmental testing. Tests. Test Cb. Damp heat, steady state, primarily for equipment
BS 2011-2.1Db:1981* IEC 60068-2-30:1980Environmental testing. Tests. Test Db and guidance : Damp heat, cyclic (12 + 12 hour cycle)
BS 2011-2.1Fd:1973Environmental testing. Tests. Test Fd. Random vibration - wide band, general requirements
BS 2011-2.1Fda:1973Environmental testing. Tests. Test Fda. Random vibration - wide band reproducibility high
BS 2011-2.1Fdb:1973Environmental testing. Tests. Test Fdb. Random vibration - wide band reproducibility medium
BS 2011-2.1Fdc:1973Environmental testing. Tests. Test Fdc. Random vibration - wide band reproducibility low
BS 2011-2.1J:1989* IEC 60068-2-10:1988Environmental testing. Tests. Test J and guidance. Mould growth
BS 2011-2.1Ka:1982* IEC 60068-2-11:1981Environmental testing. Tests. Test Ka.Salt mist
BS 2011-2.1Kc:1991Environmental testing. Tests. Test Kc and guidance. Sulphur dioxide test for contacts and connections
BS 2011-2.1Kd:1977* IEC 60068-2-43:1976Environmental testing. Tests. Test Kd. Hydrogen sulphide test for contacts and connections
BS 2011-2.1M:1984* IEC 60068-2-13:1983Environmental testing. Tests. Test M. Low air pressure
BS 2011-2.1N:1985* IEC 60068-2-14:1984Environmental testing. Tests. Test N. Change of temperature
BS 2011-2.1R:1990* IEC 60068-2-18:1989Environmental testing. Tests. Test R and guidance. Water
BS 2011-2.1Sa:1977* IEC 60068-2-5:1975Environmental testing. Tests. Test Sa. Simulated solar radiation at ground level
BS 2011-2.1T:1981* IEC 60068-2-20:1979Environmental testing. Tests. Test T. Soldering
BS 2011-2.1Ta:1989* IEC 60068-2-54:1985Environmental testing. Tests. Test Ta. Soldering. Solderability testing by the wetting balance method
BS 2011-2.1Td:1990* IEC 60068-2-58:1989Environmental testing. Tests. Test Td. Solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS 2011-2.1Z/AD:1977* IEC 60068-2-38:1974Environmental testing. Tests. Tests Z/AD. Composite temperature/humidity cyclic test
BS 2011-2.1Z/AM:1977* IEC 60068-2-40:1976Environmental testing. Tests. Test Z/AM. Combined cold/low air pressure tests
BS 2011-2.1Z/AMD:1977* IEC 60068-2-39:1976Environmental testing. Tests. Test Z/AMD. Combined sequential cold, low air pressure and damp heat test
BS 2011-2.1Z/BFc:1984* IEC 60068-2-51:1983Environmental testing. Tests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
BS 2011-2.1Z/BM:1977* IEC 60068-2-41:1976Environmental testing. Tests. Test Z/BM. Combined dry heat/low air pressure tests
BS 2011-2.2Kd:1984* IEC 60068-2-46:1982Environmental testing. Guidance. Test Kd. Guidance on Test Kd: Hydrogen sulphide test for contacts and connections
BS 2011-2.2N:1977* IEC 60068-2-33:1971Environmental testing. Guidance. Test N. Guidance on change of temperature tests
BS 2011-2.2Sa:1977* IEC 60068-2-9:1975Environmental testing. Guidance. Test Sa. Guidance for solar radiation testing
BS 2011-3A & B:Supplement No. 1:1980* IEC 60068-3-1A:1978Environmental testing. Background information. Tests A (cold) and tests B (dry heat)
BS 2011-4.2:1984* IEC 60068-2-48:1982Environmental testing. Miscellaneous. Guidance on the application of the tests of BS 2011 to simulate the effects of storage
BS 2011-5.1:1991* IEC 60068-5-1:1991Environmental testing. Guide to drafting of test methods. General principles
BS 2011-5.2:1992* IEC 60068-5-2:1990Environmental testing. Guide to drafting of test methods. Terms and definitions
BS 2011:Part 1.1:1989* IEC 60068-1:1988Environmental testing. General and guidance
BS 2011:Part 2.1Ef:1992* IEC 60068-2-62:1991Environmental testing. Tests. Test Ef. Impact, pendulum hammer
BS 2011:Part 2.1Fc:1983* IEC 60068-2-6:1982Environmental testing. Tests. Test Fc. Vibration (sinusoidal)
BS 2011:Part 2.1Kb:1987* IEC 60068-2-52:1984Environmental testing. Tests. Test Kb. Salt mist, cyclic (sodium chloride solution)
BS 2011:Part 2.1Pz:1970Environmental testing. Tests. Test Pz: Flammability
BS 2011:Part 2.1Q:1981* IEC 60068-2-17:1978Environmental testing. Tests. Test Q. Sealing
BS 2011:Part 2.1U:1984* IEC 60068-2-21:1983Environmental testing. Tests. Test U. Robustness of terminations and integral mounting devices
BS 2011:Part 2.1U:1984* IEC 60068-2-21:1983Environmental testing. Tests. Tests Z/AFc. Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
BS 2011:Part 2.1Z/ABDM:1983Environmental testing. Tests. Test Z/ABDM. Climatic sequence primarily intended for components
BS 2011:Part 2.2C and D:1990* IEC 60068-2-28:1990 Environmental testing. Guidance. Tests C & D. Guidance for damp heat tests
BS 2011:Part 2.2T:1981* IEC 60068-2-44:1979Environmental testing. Guidance. Test T. Guidance on Test T: soldering
BS 2011:Part 2.2Z/AFc and Z/BFc:1986* IEC 60068-2-53:1984Environmental testing. Guidance. Tests Z/AFc and Z/BFc. Guidance on combined temperature (cold and dry heat) and vibration (sinusoidal) tests
BS 2011:Part 3A & B:1977* IEC 60068-3-1:1974Environmental testing. Background information. Tests A (cold) and tests B (dry heat)
BS 2011:Part 3Z/AM & Z/BM:1977* IEC 60068-3-2:1976 Environmental testing. Background information. Tests Z/AM & Z/BM. Combined temperature/low air pressure tests
BS 2011:Part 4:Section 4.4:1993* IEC 60068-4:1987 Environmental testing. Miscellaneous. Information for specification writers. Test summaries
BS 7479:1991* ISO 9227:1990Method for salt spray corrosion tests in artificial atmospheres
BS 7527-2.1:1991* IEC 60721-2-1:1982Classification of environmental conditions. Environmental conditions appearing in nature. Temperature and humidity
BS 7527-2.2:1991* IEC 60721-2-2:1988Classification of environmental conditions. Environmental conditions appearing in nature. Precipitation and wind
BS 7527-2.3:1991* IEC 60721-2-3:1987Classification of environmental conditions. Environmental conditions appearing in nature. Air pressure
BS 7527-2.4:1991* IEC 60721-2-4:1987Classification of environmental conditions. Environmental conditions appearing in nature. Solar radiation and temperature
BS 7527-2.5:1991* IEC 60721-2-5:1991Classification of environmental conditions. Environmental conditions appearing in nature. Dust, sand, salt mist
BS 7527-2.6:1991* IEC 60721-2-6:1990Classification of environmental conditions. Environmental conditions appearing in nature. Earthquake vibration and shock
BS 7527-2.7:1991* IEC 60721-2-7:1987Classification of environmental conditions. Environmental conditions appearing in nature. Fauna and flora
BS 7527:Part 1:1991* IEC 60721-1:1990Classification of environmental conditions. Environmental conditions appearing in nature. Environmental parameters and their severities
BS EN 60068-1:1995* IEC 60068-1:1988Environmental testing. General and guidance
BS EN 60068-2-10:2005Environmental testing. Tests. Test J and guidance: Mould growth
BS EN 60068-2-11:1999* IEC 60068-2-11:1981Environmental testing. Test methods. Tests. Test KA. Salt mist
BS EN 60068-2-13:1999* IEC 60068-2-13:1983Environmental testing. Test methods. Tests. Test M. Low air pressure
BS EN 60068-2-14:2000* IEC 60068-2-14:1984Environmental testing. Test methods. Test N. Change of temperature
BS EN 60068-2-14:2009Environmental testing. Tests. Test N. Change of temperature
BS EN 60068-2-17:1995* IEC 60068-2-17:1994Environmental testing. Test methods. Test Q. Sealing
BS EN 60068-2-18:2001* IEC 60068-2-18:2000Environmental testing. Test methods. Tests R and guidance. Water
BS EN 60068-2-1:1993* IEC 60068-2-1:1993Environmental testing. Test methods. Tests A. Cold
BS EN 60068-2-1:2007Environmental testing. Tests. Test A. Cold
BS EN 60068-2-20:2008Environmental testing. Tests. Test T. Test methods for solderability and resistance to soldering heat of devices with leads
BS EN 60068-2-21:1997* IEC 60068-2-21:1983Environmental testing. Test methods. Test U. Robustness of terminations and integral mounting devices
BS EN 60068-2-21:1999* IEC 60068-2-21:1999Environmental testing. Test methods. Test U. Robustness of terminations and integral mounting devices
BS EN 60068-2-21:2006Environmental testing. Tests. Test U. Robustness of terminations and integral mounting devices
BS EN 60068-2-27:1993* IEC 60068-2-27:1987Environmental testing. Test methods. Environmental testing procedures. Tests. Test Ea and guidance. Shock
BS EN 60068-2-27:2009Environmental testing. Tests. Test Ea and guidance. Shock
BS EN 60068-2-29:1993* IEC 60068-2-29:1987Environmental testing. Test methods. Environmental testing procedures. Tests. Test Eb and guidance. Bump
BS EN 60068-2-2:1993* IEC 60068-2-2:1974Environmental testing. Test methods. Tests B. Dry heat
BS EN 60068-2-2:2007Environmental testing. Tests. Test B. Dry heat
BS EN 60068-2-30:1999* IEC 60068-2-30:1980Environmental testing. Test methods. Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
BS EN 60068-2-30:2005Environmental testing. Tests. Test Db and guidance: Damp heat, cyclic (12 h + 12 h cycle)
BS EN 60068-2-31:1993* IEC 60068-2-31:1969Environmental testing. Test methods. Test Ec. Drop and topple, primarily for equipment-type specimens
BS EN 60068-2-31:2008Environmental testing. Tests. Test Ec. Rough handling shocks, primarily for equipment-type specimens
BS EN 60068-2-32:1993Environmental testing. Test methods. Test Ed. Free fall
BS EN 60068-2-33:2000* IEC 60068-2-33:1971Environmental testing. Test methods. Guidance on change of temperature tests
BS EN 60068-2-38:1999* IEC 60068-2-38:1974Environmental testing. Test methods. Tests. Test Z/AD:composite temperature/humidity cyclic test
BS EN 60068-2-39:1999* IEC 60068-2-39:1999Environmental testing. Test methods. Tests. Test Z/AMD. Combined sequential cold, low air pressure and damp heat test
BS EN 60068-2-40:2000* IEC 60068-2-40:1976Environmental testing. Test methods. Test Z/AM. Combined cold/low air pressure tests
BS EN 60068-2-41:2000* IEC 60068-2-41:1976Environmental testing. Test methods. Tests. Test Z/BM: Combined dry heat/low air pressure tests
BS EN 60068-2-44:1995* IEC 60068-2-44:1995Environmental testing. Test methods. Tests. Guidance on Test T. Soldering
BS EN 60068-2-45:1993* IEC 60068-2-45:1980Environmental testing. Test methods. Environmental testing Tests. Test XA and guidance. Immersion in cleaning solvents
BS EN 60068-2-47:1993* IEC 60068-2-47:1982Environmental testing. Test methods. Mounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance
BS EN 60068-2-47:2000* IEC 60068-2-47:1999Environmental testing. Test methods. Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests
BS EN 60068-2-47:2005Environmental testing. Tests. Mounting of specimens for vibration, impact and similar dynamic tests
BS EN 60068-2-48:2000* IEC 60068-2-48:1982Environmental testing. Test methods. Guidance on the application of the tests of IEC 60068 to simulate the effects of storage
BS EN 60068-2-50:2000* IEC 60068-2-50:1983Environmental testing. Test methods. Tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat dissipating specimens
BS EN 60068-2-51:2000* IEC 60068-2-51:1983Environmental testing. Test methods. Tests. Tests Z/BFc. Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
BS EN 60068-2-52:1996* IEC 60068-2-52:1996Environmental testing. Test methods. Tests. Test Kb. Salt mist cyclic (sodium chloride solution)
BS EN 60068-2-54:2006Environmental testing. Tests. Test Ta: Solderability testing of electronic components by the wetting balance method
BS EN 60068-2-55:1993* IEC 60068-2-55:1987Environmental testing. Test methods. Environmental testing procedures. Tests. Test Ee and guidance. Bounce
BS EN 60068-2-57:1993* IEC 60068-2-57:1989Environmental testing. Test methods. Test Ff. Vibration - time-history method
BS EN 60068-2-57:2000* IEC 60068-2-57:1999Environmental testing. Test methods. Test Ff. Vibration. Time-history method
BS EN 60068-2-58:1999* IEC 60068-2-58:1999Environmental testing. Test methods. Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS EN 60068-2-58:2004Environmental testing. Tests. Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS EN 60068-2-59:1993Environmental testing. Test methods. Test Fe and guidance. Vibration (sine-beat method)
BS EN 60068-2-5:2000* IEC 60068-2-5:1975Environmental testing. Test methods. Test Sa: Simulated solar radiation at ground level
BS EN 60068-2-60:1996* IEC 60068-2-60:1995Environmental testing. Test methods. Test Ke. Flowing mixed gas corrosion test
BS EN 60068-2-61:1994* IEC 60068-2-61:1991Environmental testing. Test methods. Test Z/ABDM. Climatic sequence
BS EN 60068-2-62:1996* IEC 60068-2-62:1991Environmental testing. Test methods. Test Ef. Impact, pendulum hammer
BS EN 60068-2-63:1995* IEC 60068-2-63:1991Environmental testing. Test methods. Test Eq: Impact, spring hammer
BS EN 60068-2-64:1995* IEC 60068-2-64:1993Environmental testing. Test methods. Test Fh. Vibration, broad-band random (digital control) and guidance
BS EN 60068-2-64:2008Environmental testing. Tests. Test Fh. Vibration, broadband random and guidance
BS EN 60068-2-65:1995* IEC 60068-2-65:1993Environmental testing. Test methods. Test Fg. Vibration, acoustically induced
BS EN 60068-2-66:1995* IEC 60068-2-66:1994Environmental testing. Test methods. Test Cx. Damp heat, steady state (unsaturated pressurized vapour)
BS EN 60068-2-67:1996* IEC 60068-2-67:1995Environmental testing. Test methods. Test Cy. Damp heat, steady state, accelerated test primarily intended for components
BS EN 60068-2-68:1996* IEC 60068-2-68:1994Environmental testing. Test methods. Test L. Dust and sand
BS EN 60068-2-69:1996* IEC 60068-2-69:1995Environmental testing. Test methods. Tests. Test Te. Solderability testing of electronic components for surface mount technology by the wetting balance method
BS EN 60068-2-69:2007Environmental testing. Tests. Test Te. Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method
BS EN 60068-2-6:1996* IEC 60068-2-6:1995Environmental testing. Test methods. Test Fc. Vibration (sinusoidal)
BS EN 60068-2-6:2008Environmental testing. Tests. Test Fc. Vibration (sinusoidal)
BS EN 60068-2-70:1996* IEC 60068-2-70:1995Environmental testing. Test methods. Test Xb. Abrasion of markings and letterings caused by rubbing of fingers and hands
BS EN 60068-2-74:2000* IEC 60068-2-74:1999Environmental testing. Test methods. Test Xc: Fluid contamination
BS EN 60068-2-75:1997* IEC 60068-2-75:1997Environmental testing. Test methods. Test Eh. Hammer tests
BS EN 60068-2-77:1999* IEC 60068-2-77:1999Environmental testing. Test methods. Body strength and impact shock
BS EN 60068-2-78:2002* IEC 60068-2-78:2001Environmental testing. Test methods. Test Cab. Damp heat, steady state
BS EN 60068-2-7:1993* IEC 60068-2-7:1983Environmental testing. Test methods. Test Ga and guidance. Acceleration, steady state
BS EN 60068-2-80:2005Environmental testing. Tests. Test Fi: Vibration. Mixed mode
BS EN 60068-2-81:2003Environmental testing. Test methods. Test Ei. Shock. Shock response spectrum synthesis
BS EN 60068-2-82:2007Environmental testing. Tests. Test Tx. Whisker test methods for electronic and electric components
BS EN 60068-2-9:2000* IEC 60068-2-9:1975Environmental testing. Test methods. Tests. Guidance for solar radiation testing
BS EN 60068-3-11:2007Environmental testing. Supporting documentation and guidance. Calculation of uncertainty of conditions in climatic test chambers
BS EN 60068-3-1:1999* IEC 60068-3-1:1974* IEC 60068-3-1A:1978Environmental testing. Guidance. Cold and dry heat tests. Cold and dry heat tests
BS EN 60068-3-2:1999* IEC 60068-3-2:1976Environmental testing. Guidance. Combined temperature/low air pressure tests. Combined temperature/low air pressure tests
BS EN 60068-3-3:1993Environmental testing. Guidance. Environmental testing. Miscellaneous. Guide to seismic test methods for equipment
BS EN 60068-3-4:2002* IEC 60068-3-4:2001Environmental testing. Supporting documentation and guidance. Damp heat tests
BS EN 60068-3-5:2002* IEC 60068-3-5:2001Environmental testing. Guidance. Confirmation of the performance of temperature chambers
BS EN 60068-3-6:2002* IEC 60068-3-6:2001Environmental testing. Guidance. Confirmation of the performance of temperature/humidity chambers
BS EN 60068-3-7:2002* IEC 60068-3-7:2001Environmental testing. Guidance. Measurements in temperature chambers for tests A and B (with load)
BS EN 60068-3-8:2003Environmental testing. Supporting documentation and guidance. Selecting amongst vibration tests
BS EN 60068-4:1996* IEC 60068-4:1987Environmental testing. Information for specification writers. Test summaries
BS EN 60068-5-2:2000* IEC 60068-5-2:1990Environmental testing. Guide to drafting of test methods. Terms and definitions
BS EN 60721-1:1996* IEC 60721-1:1996Classification of environmental conditions. Environmental parameters and their severities
BS EN 60721-3-0:1993* IEC 60721-3-0:1984Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Introduction
BS EN 60721-3-1:1993* IEC 60721-3-1:1987Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Storage
BS EN 60721-3-1:1997* IEC 60721-3-1:1997Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Storage
BS EN 60721-3-2:1993* IEC 60721-3-2:1985Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Transportation
BS EN 60721-3-2:1997* IEC 60721-3-2:1997Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Transportation
BS EN 60721-3-3:1993* IEC 60721-3-3:1987Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Stationary use at weatherprotected locations
BS EN 60721-3-3:1995* IEC 60721-3-3:1994Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Stationary use at weatherprotected locations
BS EN 60721-3-4:1993* IEC 60721-3-4:1987Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Stationary use at non-weatherprotected locations
BS EN 60721-3-4:1995* IEC 60721-3-4:1995Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Stationary use at non-weatherprotected locations
BS EN 60721-3-5:1993Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Ground vehicle installations
BS EN 60721-3-5:1997* IEC 60721-3-5:1997Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Ground vehicle installations
BS EN 60721-3-6:1993* IEC 60721-3-6:1987Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Ship environment
BS EN 60721-3-7:1993* IEC 60721-3-7:1987Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Portable and non-stationary use
BS EN 60721-3-7:1996* IEC 60721-3-7:1995Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Portable and non-stationary use
BS EN 60721-3-9:1993* IEC 60721-3-9:1993Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Microclimates inside products
BS EN 61207-3:2002Expression of performance of gas analyzers. Paramagnetic oxygen analyzers
BS EN ISO 9227:2006Corrosion tests in artificial atmospheres. Salt spray tests
DD 175:1988Code of practice for the identification of potentially contaminated land and its investigation
PD IEC TR 60721-4-0:2002Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Introduction
PD IEC TR 60721-4-1:2002Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Storage
PD IEC TR 60721-4-2:2002* IEC TR 60721-4-2:2001 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Transportation
PD IEC TR 60721-4-3:2002* IEC TR 60721-4-3:2001 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Stationary use at weatherprotected locations
PD IEC TR 60721-4-4:2002Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Stationary use at non-weatherprotected locations
PD IEC TR 60721-4-5:2002* IEC TR 60721-4-5:2001 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Ground vehicle installations
PD IEC TR 60721-4-6:2002* IEC TR 60721-4-6:2001 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Ship environment
PD IEC TR 60721-4-7:2001* IEC TR 60721-4-7:2001 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Portable and non-stationary use
PD IEC/TR 60068-3-12:2007Environmental testing. Supporting documentation and guidance. Method to evaluate a possible lead-free solder reflow temperature profile
IHS experience – your advantage

IHS, formerly known as Technical Indexes, is one of the foremost providers of standards, regulatory, product and supplier information to industries worldwide including construction, health & safety, engineering, education, rail, energy, automotive, defence and many more. With over 45 years experience and more than 6000 customers based in the UK alone, IHS is the only company of its type providing access to several million pages of vital information.

The British Standard Service provided by IHS focuses on supplying you an established, authoritative, reliable and comprehensive information source.

How to subscribe to British Standards Online