| BS 1498:1954 | Specification for gear hobbing machines for turbines and similar drives |
| BS 2007:1975 | Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements |
| BS 2062-1:1959 | Specification for gear hobs. Hobs for general purposes, 1 d.p. to 20 d.p. inclusive |
| BS 2062-2:1960 | Specification for gear hobs. Hobs for gears for turbine reduction and similar drives |
| BS 235:1987 | Specification for gears for electric traction |
| BS 2518-1:1954 | Specification for rotary form relieved gear cutters. Diametral pitch |
| BS 2518-2:1977 | Specification for rotary form relieved gear cutters. Metric module |
| BS 2519-1:1976* ISO/R 1122-1969 | Glossary for gears. Geometrical definitions |
| BS 2519-2:1976* ISO 701:1976 | Glossary for gears. Notation |
| BS 2697:1976 | Specification for rack type gear cutters, metric module |
| BS 3027:1968 | Specification for dimensions of worm gear units |
| BS 3696-1:1977 | Specification for master gears. Spur and helical gears (metric module) |
| BS 4185-11:1983 | Machine tool components. Recommendations for accuracy grades of gears |
| BS 4185:Part 6:1985 | Machine tool components. Specification for change gears |
| BS 436-1:1967 | Spur and helical gears. Basic rack form, pitches and accuracy (diametral pitch series) |
| BS 436-2:1970 | Spur and helical gears. Basic rack form, modules and accuracy (1 to 50 metric module) |
| BS 436-3:1986 | Spur and helical gears. Method for calculation of contact and root bending stress limitations for metallic involute gears |
| BS 436-4:1996* ISO 1328-1:1995 | Spur and helical gears. Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth |
| BS 436-5:1997* ISO 1328-2:1997 | Spur and helical gears. Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
| BS 4517:1969 | Specification for dimensions of spur and helical geared motor units (metric series) |
| BS 4582-1:1970 | Specification for fine pitch gears (metric module). Involute spur and helical gears |
| BS 4582-2:1978 | Specification for fine pitch gears (metric module). Hobs and cutters |
| BS 5221:1987 | Specification for general purpose, metric module gear hobs |
| BS 5246:1976 | Specification for pinion type cutters for spur gears - 1 to 8 metric module |
| BS 545:1982 | Specification for bevel gears (machine cut) |
| BS 6168:1987 | Specification for non-metallic spur gears |
| BS 721-1:1963 | Specification for worm gearing. Imperial units |
| BS 721-2:1983 | Specification for worm gearing. Metric units |
| BS 7676-1:1993* ISO 8579-1:1993 | Acceptance code for gears. Determination of airborne sound power levels emitted by gear units |
| BS 7676-2:1993* ISO 8579-2:1993 | Acceptance code for gears. Determination of mechanical vibrations of gear units during acceptance testing |
| BS 7848:1996* ISO 10825:1995 | Gears. Wear and damage to gear teeth. Terminology |
| BS 7862:1996* ISO 14104:1995 | Gears. Surface temper etch inspection after grinding |
| BS 978-1:1968 | Specification for fine pitch gears. Involute spur and helical gears |
| BS 978-2:1952 | Specification for fine pitch gears. Cycloidal type gears |
| BS 978-2:Addendum No. 1:1959 | Gears for instruments and clockwork mechanisms. Cycloidal type gears. Double circular arc type gears |
| BS 978-3:1952 | Specification for fine pitch gears. Bevel gears |
| BS 978-5:1965 | Specification for fine pitch gears. Hobs and cutters |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| BS EN ISO 2203:1997* BS 308-1.16:1997 | Technical drawing. Conventional representation of gears |
| BS ISO 10300-1:2001 | Calculation of load capacity of bevel gears. Introduction and general influence factors |
| BS ISO 10300-2:2001 | Calculation of load capacity of bevel gears. Calculation of surface durability (pitting) |
| BS ISO 10300-3:2001 | Calculation of load capacity of bevel gears. Calculation of tooth root strength |
| BS ISO 10347:1999 | Worm gears. Geometry of worms. Name plates for worm gear units, centre distances, information to be supplied to gear manufacturer by the purchaser |
| BS ISO 1122-1:1998 | Vocabulary of gear terms. Definitions related to geometry |
| BS ISO 14635-1:2000 | Gears. FZG test procedures. FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils |
| BS ISO 14635-3:2005 | Gears. FZG test procedures. FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| BS ISO 17485:2006 | Bevel gears. ISO system of accuracy |
| BS ISO 18653:2003 | Gears. Evaluation of instruments for the measurement of individual gears |
| BS ISO 21771:2007 | Gears. Cylindrical involute gears and gear pairs. Concepts and geometry |
| BS ISO 23509:2006 | Bevel and hypoid gear geometry |
| BS ISO 2490:2007 | Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module. Nominal dimensions |
| BS ISO 53:1998 | Cylindrical gears for general and heavy engineering. Standard basic rack tooth profile |
| BS ISO 54:1996 | Cylindrical gears for general engineering and for heavy engineering. Modules |
| BS ISO 6336-1:1996 | Calculation of load capacity of spur and helical gears. Basic principles, introduction and general influence factors |
| BS ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears. Basic principles, introduction and general influence factors |
| BS ISO 6336-2:1996 | Calculation of load capacity of spur and helical gears. Calculation of surface durability (pitting) |
| BS ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears. Calculation of surface durability (pitting) |
| BS ISO 6336-3:1996 | Calculation of load capacity of spur and helical gears. Calculation of tooth bending strength |
| BS ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears. Calculation of tooth bending strength |
| BS ISO 6336-5:1996 | Calculation of load capacity of spur and helical gears. Strength and quality of materials |
| BS ISO 6336-5:2003 | Calculation of load capacity of spur and helical gears. Strength and quality of materials |
| BS ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears. Calculation of service life under variable load |
| BS ISO 701:1998 | International gear notation. Symbols for geometrical data |
| BS ISO 81400-4:2005 | Wind turbines. Design and specification of gearboxes |
| BS ISO 8579-1:2002 | Acceptance code for gear units. Test code for airborne sound |
| BS ISO 9083:2001 | Calculation of load capacity of spur and helical gears. Application to marine gears |
| BS ISO 9084:2000 | Calculation of load capacity of spur and helical gears. Application to high speed gears and gears of similar requirements |
| BS ISO 9085:2002 | Calculation of load capacity of spur and helical gears. Application for industrial gears |
| BS ISO TR 10064-1:1992 | Code of inspection practice. Inspection of corresponding flanks of gear teeth |
| BS ISO TR 10064-2:1996 | Code of inspection practice. Inspection related to radial composite deviations, runout, tooth thickness and backlash |
| BS ISO TR 10064-3:1996 | Code of inspection practice. Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| BS ISO TR 10495:1997 | Cylindrical gears. Calculation of service life under variable load. Conditions for cylindrical gears in accordance with ISO 6336 |
| BS ISO TR 10828:1997 | Worm gears. Geometry of worm profiles |
| BS ISO/TR 10064-4:1998 | Code of inspection practice. Recommendations relative to surface texture and tooth contact pattern checking |
| BS ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears. Flash temperature method |
| BS ISO/TR 13989-2:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears. Integral temperature method |
| BS ISO/TR 14179-1:2001 | Gears. Thermal capacity. Rating gear drives with thermal equilibrium at 95°C sump temperature |
| BS ISO/TR 14179-2:2001 | Gears. Thermal capacity. Thermal load carrying capacity |
| PD 6457:1970 | Guide to the application of addendum modification to involute spur and helical gears |
| PD ISO/TR 10064-5:2005 | Code of inspection practice. Recommendations relative to evaluation of gear measuring instruments |
