| BS 1553-1:1977 | Specification for graphical symbols for general engineering. Piping systems and plant |
| BS 1710:1984 | Specification for identification of pipelines and services |
| BS 4508-1:1986 | Thermally insulated underground pipelines. Specification for steel cased systems with air gap |
| BS 4508-4:1977 | Thermally insulated underground pipelines. Specific testing and inspection requirements for cased systems without air gap |
| BS 5422:1990 | Method for specifying thermal insulating materials on pipes, ductwork and equipment (in the temperature range -40°C to +700°C) |
| BS 5572:1994 | Code of practice for sanitary pipework |
| BS 5911:Part 200:1989 | Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced manholes and soakaways of circular cross section |
| BS 5970:1992 | Code of practice for thermal insulation of pipework and equipment (in the temperature range -100°C to +870°C) |
| BS 5970:2001 | Code of practice for thermal insulation of pipework and equipment in the temperature range of -100°C to +870°C |
| BS 6100-2.8:1990 | Glossary of building and civil engineering terms. Civil engineering. Pipelines and ducts |
| BS 7572:1992 | Code of practice for thermally insulated underground piping systems |
| BS 8010-1:1989 | Code of practice for pipelines. Pipelines on land: general |
| BS 8010-3:1993 | Code of practice for pipelines. Pipelines subsea: design, construction and installation |
| BS EN 10329:2005 | Steel tubes and fittings for onshore and offshore pipelines. External field joint coatings |
| BS EN 12100:1998* BS 2782-11:Method 1133D:1997 | Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports |
| BS EN 12200-1:2000 | Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system |
| BS EN 12201-1:2003 | Plastic piping systems for water supply. Polyethylene (PE). General |
| BS EN 12201-5:2003 | Plastic piping systems for water supply. Polyethylene (PE). Fitness for purpose of the system |
| BS EN 12294:2000* BS 2782-11:Method 1123V:2000 | Plastic piping systems. Systems for hot and cold water. Test method for leaktightness under vacuum |
| BS EN 12474:2001 | Cathodic protection for submarine pipelines |
| BS EN 12666-1:2005 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Specifications for pipes, fittings and the system |
| BS EN 1293:1999 | General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers |
| BS EN 1295-1:1998 | Structural design of buried pipelines under various conditions of loading. General requirements |
| BS EN 12954:2001 | Cathodic protection of buried or immersed metallic structures. General principles and application for pipelines |
| BS EN 13052-1:2001 | Influence of materials on water intended for human consumption. Organic materials. Determination of colour and turbidity of water in piping systems. Test method |
| BS EN 1329-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system |
| BS EN 1333:1997 | Pipework components. Definition and selection of PN |
| BS EN 1333:2006 | Flanges and their joints. Pipework components. Definition and selection of PN |
| BS EN 13480-1:2002 | Metallic industrial piping. General |
| BS EN 13480-2:2002 | Metallic industrial piping. Materials |
| BS EN 13480-3:2002 | Metallic industrial piping. Part 3: Design and calculation |
| BS EN 13480-4:2002 | Metallic industrial piping. Fabrication and installation |
| BS EN 13480-5:2002 | Metallic Industrial Piping. Inspection and testing |
| BS EN 13480-8:2007 | Metallic industrial piping. Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13689:2002 | Guidance on the classification and design of plastics piping systems used for renovation |
| BS EN 14161:2003 | Petroleum and natural gas industries. Pipeline transportation systems |
| BS EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks. General |
| BS EN 14419:2003 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Surveillance systems |
| BS EN 1444:2001 | Fibre-cement pipelines. Guide for laying and on-site work practices |
| BS EN 1451-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Specifications for pipes, fittings and the system |
| BS EN 1452-1:2000 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). General |
| BS EN 1452-4:2000 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Valves and ancillary equipment |
| BS EN 1452-5:2000 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Fitness for purpose of the system |
| BS EN 1455-1:2000 | Plastics piping systems for soil and waste (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS). Specifications for pipes, fittings and the system |
| BS EN 15012:2007 | Plastics piping systems. Soil and waste discharge systems within the building structure. Performance characteristics for pipes, fittings and their joints |
| BS EN 15015:2007 | Plastics piping systems. Systems for hot and cold water not intended for human consumption. Performance characteristics for pipes, fittings and their joints |
| BS EN 15189:2006 | Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods |
| BS EN 1519-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Specifications for pipes, fittings and the system |
| BS EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| BS EN 15542:2008 | Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods |
| BS EN 1555-1:2002 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). General |
| BS EN 1555-5:2002 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fitness for the purpose of the system |
| BS EN 1565-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Specifications for pipes, fittings and the system |
| BS EN 1566-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Specification for pipes, fittings and the system |
| BS EN 1636-6:2001 | Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Practices for installation |
| BS EN 1993-4-3:2007 | Eurocode 3. Design of steel structures. Pipelines |
| BS EN 45510-7-1:2000 | Guide for the procurement of power station equipment. Pipework and valves. High pressure piping systems. Section 1: High pressure piping systems |
| BS EN 773:1999 | General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers |
| BS EN 805:2000 | Water supply. Requirements for systems and components outside buildings |
| BS EN 806-1:2000 | Specifications for installations inside buildings conveying water for human consumption. General |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption. Design |
| BS EN ISO 10405:2006 | Petroleum and natural gas industries. Care and use of casing and tubing |
| BS EN ISO 10931:2005 | Plastics piping systems for industrial applications. Poly(vinylidene fluoride) (PVDF). Specifications for components and the system |
| BS EN ISO 15493:2003 | Plastics piping systems for industrial applications. Acrylonitrile-butadiene-styrene (ABS), unplasticized poly (vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C). Specifications for components and the system. Metric series |
| BS EN ISO 15494:2003 | Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE) and polypropylene (PP). Specifications for components and the system. Metric series |
| BS EN ISO 15874-1:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). General |
| BS EN ISO 15874-5:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fitness for purpose of the system |
| BS EN ISO 15875-1:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). General |
| BS EN ISO 15875-5:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Fitness for purpose of the system |
| BS EN ISO 15876-1:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). General |
| BS EN ISO 15876-5:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). Fitness for purpose of the system |
| BS EN ISO 15877-1:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). General |
| BS EN ISO 15877-5:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Fitness for purpose of the system |
| BS EN ISO 6412-1:1995* BS 308-4.6:1995 | Technical drawings. Simplified representation of pipelines. General rules and orthogonal representation |
| BS EN ISO 6412-2:1995* BS 308-4.7:1995 | Technical drawings. Simplified representation of pipelines. Isometric projection |
| BS EN ISO 6412-3:1996* BS 308-4.8:1996 | Technical drawings. Simplified representation of pipelines. Terminal features of ventilation and drainage systems |
| BS EN ISO 6708:1996 | Pipework components. Definition and selection of DN (nominal size) |
| BS EN ISO 9311-1:2005 | Adhesives for thermoplastics piping systems. Determination of film properties |
| BS EN ISO 9311-3:2005 | Adhesives for thermoplastic piping systems. Test method for the determination of resistance to internal pressure |
| DD CEN ISO/TS 15874-7:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). Guidance for the assessment of conformity |
| DD CEN ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). Guidance for the assessment of conformity |
| DD CEN ISO/TS 15877-7:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity |
| DD CEN/TS 12200-2:2003 | Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD CEN/TS 12666-2:2005 | Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Guidance for the assessment of conformity |
| DD CEN/TS 14578:2003 | Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP). Recommended practice for installation |
| DD CEN/TS 14632:2006 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity |
| DD CEN/TS 14758-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene with mineral modifier(s) (PP-MD). Guidance for the assessment of conformity |
| DD CEN/TS 1555-7:2003 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Guidance for the assessment of conformity |
| DD CEN/TS 1852-3:2003 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for installation |
| DD ENV 12108:2001 | Plastics piping systems. Guidance for the installation inside buildings of pressure systems for hot and cold water intended for human consumption |
| DD ENV 1329-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 1451-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity |
| DD ENV 1452-6:2002 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for installation |
| DD ENV 1519-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity |
| DD ENV 1565-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Guidance for the assessment of conformity |
| DD ENV 1566-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity |
| DD ENV 1998-4:1999 | Eurocode 8: Design provisions for earthquake resistance of structures. Silos, tanks and pipelines |
| DD ISO/TS 10465-1:2007 | Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). Installation procedures |
| KIT 110 | Metallic industrial piping kit |
| PD CEN/TR 1295-2:2005 | Structural design of buried pipelines under various conditions of loading. Summary of nationally established methods of design |
| PD ISO/TR 10465-2:2007 | Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). Comparison of static calculation methods |
| PD ISO/TR 10465-3:2007 | Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). Installation parameters and application limits |
| PD TR 13480-7:2002 | Metallic industrial piping. Guidance on the use of conformity assessment procedures |
