| BS 2782-11:Method 1101A:1981 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Measurement of dimensions of pipes |
| BS 2782-11:Method 1106A:1983 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Assessment of pigment dispersion in polyolefin pipes and fittings: microtome method |
| BS 2782-11:Method 1109A:1989 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications |
| BS 2782-11:Method 1112A:1989 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Leaktightness of thermoplastics pipes and fittings for non-pressure applications |
| BS 2782-11:Method 1127P:1997* ISO 1167:1996 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes, for the conveyance of fluids. Resistance to internal pressure. Test method |
| BS 2782-11:Method 1150B:1998* ISO 11414:1996 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| BS 2782-11:Method 1150E:1997* ISO 11413:1996 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| BS 2782:Part 11:Method 1103A:1982 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Stress relief test for injection moulded fittings: oven method |
| BS 2782:Part 11:Method 1104A:1983 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Measurement of opacity of thermoplastics pipes and fittings |
| BS 4346-1:1969 | Joints and fittings for use with unplasticized PVC pressure pipes. Injection moulded unplasticized PVC fittings for solvent welding for use with pressure pipes, including potable water supply |
| BS 4346-2:1970 | Joints and fittings for use with unplasticized PVC pressure pipes. Mechanical joints and fittings, principally of unplasticized PVC |
| BS 4346-3:1982 | Joints and fittings for use with unplasticized PVC pressure pipes. Specification for solvent cement |
| BS 5114:1975 | Specification for performance requirements for joints and compression fittings for use with polyethylene pipes |
| BS 5254:1976 | Specification for polypropylene waste pipe and fittings (external diameter 34.6 mm, 41.0 mm and 54.1 mm) |
| BS 5392-1:1976 | Specification for acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe. Fittings for use with pipe for industrial uses |
| BS 5392-1:2006 | Acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe. Specification |
| BS 6464:1984 | Specification for reinforced plastics pipes, fittings and joints for process plants |
| BS EN 1056:1996* BS 2782-11:Method 1107A:1996 | Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering |
| BS EN 1115-1:2001 | Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). General |
| BS EN 1119:1996* BS 2782-12:Method 1223C:1996 | Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints |
| BS EN 1120:1996* BS 2782-12:Methods 1209A & B | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
| BS EN 12061:1999* BS 2782-11:Method 1108D:1999 | Plastics piping systems. Thermoplastics fittings. Test method for impact resistance |
| BS EN 12099:1997* BS 2782-11:Method 1103E:1997 | Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content |
| BS EN 12107:1998* BS 2782-11:Method 1121F:1997 | Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components |
| BS EN 12117:1998* BS 2782-11:Method 1121G:1998 | Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships |
| BS EN 12201-3:2003 | Plastic piping systems for water supply. Polyethylene (PE). Fittings |
| BS EN 12256:1998* BS 2782-11:Method 1111F:1998 | Plastic piping systems. Thermoplastic fittings. Test method for mechanical strength or flexibility of fabricated fittings |
| BS EN 12293:2000* BS 2782-11: Method 1123T:2000 | Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling |
| BS EN 12295:2000* BS 2782-11:Method 1123P:2000 | Plastics piping systems. Thermoplastics pipes and associated fittings for hot and cold water. Test method for resistance of joints to pressure cycling |
| BS EN 1229:1997* BS 2782-12:Methods 1223A & B | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure |
| BS EN 13244-3:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE). Fittings |
| BS EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks. General |
| BS EN 14408-3:2004 | Plastics piping systems for renovation of underground gas supply networks. Lining with close-fit pipes |
| BS EN 14409-3:2004 | Plastics piping systems for renovation of underground water supply networks. Lining with close fit pipes |
| BS EN 1452-3:2000 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Fittings |
| BS EN 15014:2007 | Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints |
| BS EN 1555-3:2002 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Fittings |
| BS EN 1636-3:2001 | Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fittings |
| BS EN 1636-5:2001 | Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fitness for purpose of the joints |
| BS EN 1716:1997* BS 2782-11:Method 1108T:1997 | Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee |
| BS EN 1796:2006 | Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| BS EN 1905:1999* BS 2782-11:Method 1105C:1999 | Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content |
| BS EN 578:1994* BS 2782-11:Method 1104A:1994 | Plastics piping systems. Plastics pipes and fittings. Determination of the opacity |
| BS EN 705:1995* BS 2782-12:Methods 1220A to C | Plastics piping systems. Glass-reinforced thermosetting (GRP) pipes and fittings. Methods for regression analyses and their use |
| BS EN 727:1995* BS 2782-11:Method 1103V:1995 | Plastics piping and ducting systems. Thermoplastics pipes and fittings. Determination of Vicat softening temperature (VST) |
| BS EN 763:1995* BS 2782-11:Methods 1103A & B | Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Test method for visually assessing effects of heating |
| BS EN 802:1995* BS 2782-11:Method 1114F:1995 | Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing |
| BS EN 803:1995* BS 2782-11:Method 1123J:1995 | Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust |
| BS EN 804:1995* BS 2782-11:Method 1123K:1995 | Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure |
| BS EN 922:1995* BS 2782-11:Method 1140A:1995 | Plastics piping and ducting systems. Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U). Specimen preparation for determination of the viscosity number and calculation of the k-value |
| BS EN ISO 1167-1:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. General method |
| BS EN ISO 1167-2:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of pipe test pieces |
| BS EN ISO 1167-3:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of components |
| BS EN ISO 1167-4:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of assemblies |
| BS EN ISO 12162:1996* BS 2782-11:Method 1121A:1996 | Thermoplastics materials for pipes and fittings for pressure applications. Classification and design. Overall service (design) coefficient |
| BS EN ISO 15874-3:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). Fittings |
| BS EN ISO 15875-3:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Fittings |
| BS EN ISO 15876-3:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). Fittings |
| BS EN ISO 15877-3:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Fittings |
| BS EN ISO 16871:2003 | Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering |
| BS EN ISO 3126:2005 | Plastics piping systems. Plastics components. Determination of dimensions |
| BS EN ISO 580:2005 | Plastics piping and ducting systems. Injection-moulded thermoplastics fittings. Methods for visually assessing the effects of heating |
| BS EN ISO 7686:2005 | Plastics pipes and fittings. Determination of opacity |
| BS ISO 10147:2004 | Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content |
| BS ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 10931-1:1997 | Plastics piping systems for industrial applications. Poly (vinylidene fluoride). General |
| BS ISO 10931-3:1996 | Plastics piping systems for industrial applications. Poly (vinylidene fluoride). Fittings |
| BS ISO 13950:2007 | Plastics pipes and fittings. Automatic recognition systems for electrofusion joints |
| BS ISO 14531-3:2006 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for mechanical jointing (including PE-X/metal transitions) |
| BS ISO 14531-4:2006 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. System design and installation guidelines |
| BS ISO 16241:2005 | Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) |
| BS ISO 16422:2006 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| BS ISO 17484-1:2006 | Plastics piping systems. Multi-layer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Specifications for systems |
| BS ISO 18225:2007 | Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems |
| BS ISO 18553:2002 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| BS ISO 4427-1:2007 | Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. General |
| BS ISO 4427-2:2007 | Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Pipes |
| BS ISO 4427-3:2007 | Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Fittings |
| BS ISO 727-1:2002 | Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure. Metric series |
| BS ISO 727-2:2002 | Fittings made from unplasticized poly (vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure. Inch-based series |
| BS ISO 727-2:2005 | Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure. Inch-based series |
| BS ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Fittings for socket fusion using heated tools |
| BS ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings |
| DD CEN/TS 14541:2007 | Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials |
