| BS 2782-11:Method 1101A:1981 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Measurement of dimensions of pipes |
| BS 2782-11:Method 1106A:1983 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Assessment of pigment dispersion in polyolefin pipes and fittings: microtome method |
| BS 2782-11:Method 1108A:1989 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. True impact rate (TIR) boundaries of pipes |
| BS 2782-11:Method 1109A:1989 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications |
| BS 2782-11:Method 1112A:1989 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Leaktightness of thermoplastics pipes and fittings for non-pressure applications |
| BS 2782-11:Method 1121B:1997* ISO 161-1:1996 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series |
| BS 2782-11:Method 1121C:1997* ISO 161-2:1996 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Inch-based series |
| BS 2782-11:Method 1121H:1996* ISO/TR 10501:1993 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes for the transport of liquids under pressure. Calculation of head losses |
| BS 2782-11:Method 1127P:1997* ISO 1167:1996 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Thermoplastics pipes, for the conveyance of fluids. Resistance to internal pressure. Test method |
| BS 2782-11:Method 1150B:1998* ISO 11414:1996 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Plastics pipes and fittings. Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| BS 2782-11:Method 1150E:1997* ISO 11413:1996 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| BS 2782:Part 11:Method 1102A:1981 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Longitudinal reversion of pipes: immersion bath method |
| BS 2782:Part 11:Method 1102B:1981 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Longitudinal reversion of pipes: oven method |
| BS 2782:Part 11:Method 1104A:1983 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Measurement of opacity of thermoplastics pipes and fittings |
| BS 3284:1967 | Specification for polythene pipe (Type 50) for cold water services |
| BS 3505:1986 | Specification for unplasticized polyvinyl chloride (PVC-U) pressure pipes for cold potable water |
| BS 3506:1969 | Specification for unplasticized PVC pipe for industrial uses |
| BS 3867:1987 | Method of specifying outside diameters and pressure ratings for pipe of thermoplastics materials (inch series) |
| BS 4728:1971 | Method for determination of the resistance to constant internal pressure of thermoplastics pipe |
| BS 4991:1974 | Specification for propylene copolymer pressure pipe |
| BS 5254:1976 | Specification for polypropylene waste pipe and fittings (external diameter 34.6 mm, 41.0 mm and 54.1 mm) |
| BS 5391-1:1976 | Specification for acrylonitrile-butadiene-styrene (ABS) pressure pipe. Pipe for industrial uses |
| BS 5391-1:2006 | Acrylonitrile-butadiene-styrene (ABS) pressure pipe. Specification |
| BS 5556:1978 | Specification for general requirements for dimensions and pressure ratings for pipe of thermoplastics materials (metric series) |
| BS 6209:1982 | Specification for solvent cement for non-pressure thermoplastics pipe systems |
| BS 6437:1984 | Specification for polyethylene pipes (type 50) in metric diameters for general purposes |
| BS 6464:1984 | Specification for reinforced plastics pipes, fittings and joints for process plants |
| BS 6572:1985 | Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water |
| BS 6730:1986 | Specification for black polyethylene pipes up to nominal size 63 for above ground use for cold potable water |
| BS 7159:1989 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| BS 8010-2.5:1989 | Code of practice for pipelines. Pipelines on land: design, construction and installation. Glass reinforced thermosetting plastics |
| BS EN 1053:1996* BS 2782-11:Method 1112B:1996 | Plastics piping systems. Thermoplastics piping systems for non-pressure applications. Test methods for watertightness |
| BS EN 1054:1996* BS 2782-11:Method 1112C:1996 | Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints |
| BS EN 1055:1996* BS 2782-11:Method 1111A:1996 | Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling |
| BS EN 1056:1996* BS 2782-11:Method 1107A:1996 | Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering |
| BS EN 1115-1:2001 | Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). General |
| BS EN 1119:1996* BS 2782-12:Method 1223C:1996 | Plastics piping systems. Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints |
| BS EN 1120:1996* BS 2782-12:Methods 1209A & B | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
| BS EN 12099:1997* BS 2782-11:Method 1103E:1997 | Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content |
| BS EN 12106:1998* BS 2782-11:Method 1127C:1998 | Plastics piping systems. Polyethylene (PE) pipes. Test method for the resistance to internal pressure after application of squeeze-off |
| BS EN 12118:1998* BS 2782-11:Method 1103C:1998 | Plastics piping systems. Determination of moisture content in thermoplastics by coulometry |
| BS EN 12201-2:2003 | Plastic piping systems for water supply. Polyethylene (PE). Pipes |
| BS EN 1225:1996* BS 2782-12:Method 1214C:1996 | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness |
| BS EN 1226:1996* BS 2782-12:Method 1214E:1996 | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method to prove the resistance to initial ring deflection |
| BS EN 1227:1998* BS 2782-12:Method 1214F:1998 | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions |
| BS EN 1228:1997* BS 2782-12:Methods 1214A & B | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial specific ring stiffness |
| BS EN 12293:2000* BS 2782-11: Method 1123T:2000 | Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of mounted assemblies to temperature cycling |
| BS EN 12295:2000* BS 2782-11:Method 1123P:2000 | Plastics piping systems. Thermoplastics pipes and associated fittings for hot and cold water. Test method for resistance of joints to pressure cycling |
| BS EN 1229:1997* BS 2782-12:Methods 1223A & B | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure |
| BS EN 12324-2:1999 | Irrigation techniques. Reel machine systems. Specifications of polyethylene tubes for reel machines |
| BS EN 13244-2:2002 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE). Pipes |
| BS EN 13476-1:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). General requirements and performance characteristics |
| BS EN 13476-2:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and external surface and the system, Type A |
| BS EN 13476-3:2007 | Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B |
| BS EN 1393:1997* BS 2782-12:Methods 1210A to C | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial longitudinal tensile properties |
| BS EN 1394:1997* BS 2782-12:Meth1211A to F:1997 | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the apparent initial circumferential tensile strength |
| BS EN 1411:1996* BS 2782-11:Method 1108B:1996 | Plastics piping and ducting systems. Thermoplastics pipes. Determination of resistance to external blows by the staircase method |
| BS EN 14364:2006 | Plastic piping systems for drainage and sewerage with or without pressure. Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints |
| BS EN 1437:2002 | Plastics piping systems. Piping systems for underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading |
| BS EN 14408-1:2004 | Plastics piping systems for renovation of underground gas supply networks. General |
| BS EN 14408-3:2004 | Plastics piping systems for renovation of underground gas supply networks. Lining with close-fit pipes |
| BS EN 14409-3:2004 | Plastics piping systems for renovation of underground water supply networks. Lining with close fit pipes |
| BS EN 1446:1996* BS 2782-11:Method 1114C:1996 | Plastics piping and ducting systems.Thermoplastics pipes. Determination of ring flexibility |
| BS EN 1447:1997* BS 2782-12:Method 1227A:1997 | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure |
| BS EN 1452-2:2000 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Pipes |
| BS EN 1453-1:2000 | Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly (vinyl chloride) (PVC-U). Specifications for pipes and the system |
| BS EN 1456-1:2001 | Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for piping components and the system |
| BS EN 14718:2006 | Influence of organic materials on water intended for human consumption. Determination of the chlorine demand. Test method |
| BS EN 14802:2005 | Plastics piping systems. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading |
| BS EN 15014:2007 | Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints |
| BS EN 1555-2:2002 | Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE). Pipes |
| BS EN 1636-3:2001 | Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fittings |
| BS EN 1636-5:2001 | Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fitness for purpose of the joints |
| BS EN 1638:1997* BS 2782-12:Method 1223D:1997 | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure |
| BS EN 1796:2006 | Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| BS EN 1862:1998* BS 2782-12:Method 1209C:1998 | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment |
| BS EN 1905:1999* BS 2782-11:Method 1105C:1999 | Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content |
| BS EN 1979:1999* BS 2782-11:Method 1110C:1999 | Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam |
| BS EN 578:1994* BS 2782-11:Method 1104A:1994 | Plastics piping systems. Plastics pipes and fittings. Determination of the opacity |
| BS EN 579:1994* BS 2782-11:Method 1106E:1994 | Plastics piping systems. Crosslinked polyethylene (PE-X) pipes. Determination of degree of crosslinking by solvent extraction |
| BS EN 580:1994* BS 2782-11:Method 1105D:1994 | Plastics piping systems. Unplasticized poly (vinyl chloride) (PVC-U) pipes. Test method for the resistance to dichloromethane at a specified temperature (DCMT) |
| BS EN 580:2003 | Plastics piping Systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes. Test methods for the resistance to dichloromethane at a specified temperature (DCMT) |
| BS EN 637:1995* BS 2782-12:Method 1205A:1995 | Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method |
| BS EN 638:1995 | Plastics piping and ducting systems. Thermoplastics pipes. Determination of tensile properties |
| BS EN 705:1995* BS 2782-12:Methods 1220A to C | Plastics piping systems. Glass-reinforced thermosetting (GRP) pipes and fittings. Methods for regression analyses and their use |
| BS EN 727:1995* BS 2782-11:Method 1103V:1995 | Plastics piping and ducting systems. Thermoplastics pipes and fittings. Determination of Vicat softening temperature (VST) |
| BS EN 728:1997* BS 2782-11:Method 1103D:1997 | Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time |
| BS EN 743:1995* BS 2782-11:Methods 1102A & B | Plastics piping and ducting systems. Thermoplastics pipes. Determination of the longitudinal reversion |
| BS EN 744:1996* BS 2782-11:Method 1108C:1996 | Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method |
| BS EN 761:1995* BS 2782-12:Method 1214D:1995 | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under dry conditions |
| BS EN 852-1:1996* BS 2782-11:Method 1122A:1996 | Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes |
| BS EN 921:1995* BS 2782-11:Method 1127A:1995. | Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature |
| BS EN 922:1995* BS 2782-11:Method 1140A:1995 | Plastics piping and ducting systems. Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U). Specimen preparation for determination of the viscosity number and calculation of the k-value |
| BS EN ISO 1167-1:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. General method |
| BS EN ISO 1167-2:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of pipe test pieces |
| BS EN ISO 1167-3:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of components |
| BS EN ISO 1167-4:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Preparation of assemblies |
| BS EN ISO 12162:1996* BS 2782-11:Method 1121A:1996 | Thermoplastics materials for pipes and fittings for pressure applications. Classification and design. Overall service (design) coefficient |
| BS EN ISO 13478:1997* BS 2782-11:Method 1109R:1997 | Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test |
| BS EN ISO 13478:2007 | Thermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack propagation (RCP). Full-scale test (FST) |
| BS EN ISO 13479:1997* BS 2782-11:Method 1109N:1997 | Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation. Test method for slow crack growth on notched pipes (notch test) |
| BS EN ISO 13760:2000* BS 2782-11:Method 1120M:2000 | Plastics pipes for the conveyance of fluids under pressure. Miner's rule. Calculation method for cumulative damage |
| BS EN ISO 15874-2:2003 | Plastics piping systems for hot and cold water installations. Polypropylene (PP). Pipes |
| BS EN ISO 15875-2:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Pipes |
| BS EN ISO 15876-2:2003 | Plastics piping systems for hot and cold water installations. Polybutylene (PB). Pipes |
| BS EN ISO 15877-2:2003 | Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C). Pipes |
| BS EN ISO 16871:2003 | Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering |
| BS EN ISO 2505:2005 | Thermoplastics pipes. Longitudinal reversion. Test methods and parameters |
| BS EN ISO 3126:2005 | Plastics piping systems. Plastics components. Determination of dimensions |
| BS EN ISO 6259-1:2001 | Thermoplastics pipes. Determination of tensile properties. General test method |
| BS EN ISO 7686:2005 | Plastics pipes and fittings. Determination of opacity |
| BS EN ISO 8795:2001 | Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes and fittings and their joints |
| BS EN ISO 9080:2003 | Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| BS EN ISO 9967:1995* BS 2782-11:Method 1114A:1995 | Thermoplastics pipes. Determination of creep ratio |
| BS EN ISO 9967:2007 | Thermoplastics pipes. Determination of creep ratio |
| BS EN ISO 9969:1995* BS 2782-11:Method 1114B:1995 | Thermoplastics pipes. Determination of ring stiffness |
| BS EN ISO 9969:2007 | Thermoplastics pipes. Determination of ring stiffness |
| BS ISO 10147:2004 | Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content |
| BS ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 10931-1:1997 | Plastics piping systems for industrial applications. Poly (vinylidene fluoride). General |
| BS ISO 10931-2:1997 | Plastics piping systems for industrial applications. Poly (vinylidene fluoride). Pipes |
| BS ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Metric series |
| BS ISO 11922-2:1997 | Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Inch-based series |
| BS ISO 13950:2007 | Plastics pipes and fittings. Automatic recognition systems for electrofusion joints |
| BS ISO 13953:2001 | Polyethelene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| BS ISO 14531-3:2006 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for mechanical jointing (including PE-X/metal transitions) |
| BS ISO 14531-4:2006 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. System design and installation guidelines |
| BS ISO 16241:2005 | Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT) |
| BS ISO 16422:2006 | Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure. Specifications |
| BS ISO 17455:2005 | Plastics piping systems. Multilayer pipes. Determination of the oxygen permeability of the barrier pipe |
| BS ISO 17484-1:2006 | Plastics piping systems. Multi-layer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa). Specifications for systems |
| BS ISO 18225:2007 | Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems |
| BS ISO 18373-1:2007 | Rigid PVC pipes. Differential scanning calorimetry (DSC) method. Measurement of the processing temperature |
| BS ISO 18373-2:2008 | Rigid PVC pipes. Differential scanning calorimetry (DSC) method. Measurement of the enthalpy of fusion of crystallites |
| BS ISO 18553:2002 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| BS ISO 4065:1996 | Thermoplastics pipes. Universal wall thickness table |
| BS ISO 4427-1:2007 | Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. General |
| BS ISO 4427-2:2007 | Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Pipes |
| BS ISO 4427-3:2007 | Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. Fittings |
| BS ISO 4433-1:1997* BS 2782-11:Method 1161A:1998 | Thermoplastic pipes. Resistance to liquid chemicals. Classification. Immersion test method |
| BS ISO 4433-2:1997* BS 2782-11:Method 1161B:1998 | Thermoplastics pipes. Resistance to liquid chemicals. Classification. Polyolefin pipes |
| BS ISO 4433-3:1997* BS 2782-11:Method 1161C:1998 | Thermoplastic pipes. Resistance to liquid chemicals. Classification. Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes |
| BS ISO 4433-4:1997* BS 2782-11:Method 1161D:1998 | Thermoplastics pipes. Resistance to liquid chemicals. Classification. Poly(vinylidene fluoride) (PVDF) pipes |
| BS ISO 8584-1:1990* BS 2782-11:Methods 1160A & B | Thermoplastics pipes for industrial applications under pressure. Determination of the chemical resistance factor and of the basic stress. Polyolefin pipes |
| BS ISO 9852:2007 | Unplasticized poly(vinyl chloride) (PVC-U) pipes. Dichloromethane resistance at specified temperature (DCMT). Test method |
| CP 312-1:1973 | Code of practice for plastics pipework (thermoplastics material). General principles and choice of material |
| CP 312-2:1973 | Code of practice for plastics pipework (thermoplastics material). Unplasticized PVC pipework for the conveyance of liquids under pressure |
| CP 312-3:1973 | Code of practice for plastics pipework (thermoplastics material). Polyethylene pipes for the conveyance of liquids under pressure |
| DD CEN ISO/TS 15875-7:2003 | Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X). Guidance for the assessment of conformity |
| DD CEN/TS 12201-7:2003 | Plastics piping systems for water supply. Polyethylene (PE). Guidance for the assessment of conformity |
| DD CEN/TS 14541:2007 | Plastics pipes and fittings for non-pressure applications. Utilisation of non-virgin PVC-U, PP and PE materials |
| DD CEN/TS 1456-2:2003 | Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 1401-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity |
| DD ENV 1452-7:2001 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 1453-2:2001 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 1455-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS). Guidance for the assessment of conformity |
| DD ENV 1852-2:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Guidance for the assessment of conformity |
| PAS 27:1999 | Unplasticized poly(vinyl chloride) alloy (PVC-A) pipes and bends for water under pressure |
| PD CEN/TR 15438:2007 | Plastics piping systems. Guidance for coding of products and their intended uses |