| BS 1101:1977 | Specification for pressure containers for paint and other similar substances |
| BS 1319C:1976 | Colours for the identification of the contents of medical gas cylinders |
| BS 2654:1989 | Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry |
| BS 3256:1960 | Specification for small fusion-welded air reservoirs for road and railway vehicles |
| BS 3463:1975 | Specification for observation and gauge glasses for pressure vessels |
| BS 349:1973 | Specification for identification of the contents of industrial gas containers |
| BS 349C:1973 | Identification of the contents of industrial gas containers |
| BS 470:1984 | Specification for inspection, access and entry openings for pressure vessels |
| BS 5045-1:1982 | Transportable gas containers. Specification for seamless steel gas containers above 0.5 litre water capacity |
| BS 5045-2:1989 | Transportable gas containers. Specification for steel containers of 0.5 L up to 450 L water capacity with welded seams |
| BS 5045-3:1984 | Transportable gas containers. Specification for seamless aluminium alloy gas containers above 0.5 litre water capacity and up to 300 bar charged pressure at 15°C |
| BS 5045-5:1986 | Transportable gas containers. Specification for aluminium alloy containers above 0.5 litre up to 130 litres water capacity with welded seams |
| BS 5045-6:1987 | Transportable gas containers. Specification for seamless containers of less than 0.5 litre water capacity |
| BS 5045-7:2000 | Transportable gas containers. Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications |
| BS 5045-8:2000 | Transportable gas containers. Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15°C for special portable application |
| BS 5169:1992 | Specification for fusion welded steel air receivers |
| BS 5276-1:1984 | Pressure vessel details (dimensions). Specification for davits for branch covers of steel vessels |
| BS 5276-2:1983 | Pressure vessel details (dimensions). Specification for saddle supports for horizontal cylindrical pressure vessels |
| BS 5276-2:2003 | Pressure vessel details (dimensions). Specification for saddle supports for horizontal cylindrical pressure vessels |
| BS 5276-3:1979 | Pressure vessel details (dimensions). Dimensional tolerances for ferrous pressure vessels |
| BS 5276-4:1977 | Pressure vessel details (dimensions). Standardized pressure vessels |
| BS 5430-1:1990 | Periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylene containers). Specification for seamless steel containers of water capacity 0.5 litres and above |
| BS 5430-2:1990 | Periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylene containers). Specification for welded steel containers of water capacity 0.5 L up to 150 L |
| BS 5430-3:1990 | Periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylene containers). Specification for seamless aluminium alloy containers of water capacity 0.5 litres and above |
| BS 5430-6:1994 | Periodic inspection, testing and maintenance of transportable gas containers (excluding dissolved acetylene containers). Specification for seamless steel and aluminium alloy containers having a water capacity of less than 0.5 litre |
| BS 5500:1994 | Specification for unfired fusion welded pressure vessels |
| BS 5500:1997 | Specification for unfired fusion welded pressure vessels |
| BS 6061:1981 | Specification for transportable acetylene containers |
| BS 6071:1981 | Specification for periodic inspection and maintenance of transportable gas containers for dissolved acetylene |
| BS 6374-1:1985 | Lining of equipment with polymeric materials for the process idustries. Specification for lining with sheet thermoplastics |
| BS 6374-2:1984 | Lining of equipment with polymeric materials for the process industries. Specification for lining with non-sheet applied thermoplastics |
| BS 6374-3:1984 | Lining of equipment with polymeric materials for the process industries. Specification for lining with stoved thermosetting resins |
| BS 6374-4:1984 | Lining of equipment with polymeric materials for the process industries. Specification for lining with cold curing thermosetting resins |
| BS 6374-5:1985 | Lining of equipment with polymeric materials for the process industries. Specification for lining with rubbers |
| BS 7005:1988 | Specification for design and manufacture of carbon steel unfired pressure vessels for use in vapour compression refrigeration systems |
| BS 7339:1990 | Code of practice for supplementary checking of metallic materials of construction in pressurized systems |
| BS EN 1089-1:1997 | Transportable gas cylinders. Gas cylinder identification (excluding LPG). Stampmarking |
| BS EN 1089-2:1997 | Transportable gas cylinders. Gas cylinder identification (excluding LPG). Precautionary labels |
| BS EN 1089-2:2002 | Transportable gas cylinders. Gas cylinder identification (excluding LPG). Precautionary labels |
| BS EN 1089-3:1997 | Transportable gas cylinders. Gas cylinder identification (excluding LPG). Colour coding |
| BS EN 1089-3:2004 | Transportable gas cylinders. Gas cylinder identification (excluding LPG). Colour coding |
| BS EN 12205:2001 | Transportable gas cylinders. Non-refillable metallic gas cylinders |
| BS EN 12245:2002 | Transportable gas cylinders. Fully wrapped composite cylinders |
| BS EN 12245:2009 | Transportable gas cylinders. Fully wrapped composite cylinders |
| BS EN 12257:2002 | Transportable gas cylinders. Seamless, hoop-wrapped composite cylinders |
| BS EN 12493:2008 | LPG equipment and accessories. Welded steel tanks for liquefied petroleum gas (LPG). Road tankers design and manufacture |
| BS EN 12542:2002 | Static welded cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m³ and for installation above ground. Design and manufacture |
| BS EN 12754:2002 | Transportable gas cylinders. Cylinders for dissolved acetylene. Inspection at time of filling |
| BS EN 12755:2000 | Transportable gas cylinders. Filling conditions for acetylene bundles |
| BS EN 12807:2001 | Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction |
| BS EN 12807:2009 | LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction |
| BS EN 12816:2001 | Transportable refillable steel and aluminium LPG cylinders Disposal |
| BS EN 12817:2002 | LPG equipment and accessories. Inspection and requalification of LPG tanks up to and including 13 m³ overground |
| BS EN 12819:2002 | Inspection and requalification of LPG tanks greater than 13 m³ overground |
| BS EN 12820:2002 | Inspection and requalification of LPG tanks greater than 13 m³ underground |
| BS EN 12862:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders |
| BS EN 12863:2002 | Transportable gas cylinders. Periodic inspection and maintenance of dissolved acetylene cylinders |
| BS EN 13096:2003 | Transportable gas cylinders. Conditions for filling gases into receptacles. Single component gases |
| BS EN 13099:2003 | Transportable gas cylinders. Conditions for filling gas mixtures into receptacles |
| BS EN 13109:2002 | LPG tanks. Disposal |
| BS EN 13110:2002 | Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG). Design and construction |
| BS EN 13152:2002 | Specification and testing of LPG cylinder valves. Self closing |
| BS EN 13153:2002 | Specification and testing of LPG cylinder valves. Manually operated |
| BS EN 13293:2002 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 litre for carbon dioxide |
| BS EN 13322-1:2003 | Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Carbon steel |
| BS EN 13322-2:2003 | Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Stainless steel |
| BS EN 13365:2002 | Transportable gas cylinders. Cylinder bundles for permanent and liquefied gases (excluding acetylene). Inspection at time of filling |
| BS EN 13385:2002 | Transportable gas cylinders. Battery vehicles for permanent and liquefied gases (excluding acetylene). Inspection at time of filling |
| BS EN 13445-1:2002+A3:2007 | Unfired pressure vessels. General |
| BS EN 13445-1:2009 | Unfired pressure vessels. General |
| BS EN 13445-2:2002+A2:2006 | Unfired pressure vessels. Materials |
| BS EN 13445-2:2009 | Unfired pressure vessels. Materials |
| BS EN 13445-3:2002+A11:2006 | Unfired pressue vessels. Design |
| BS EN 13445-3:2009 | Unfired pressure vessels. Design |
| BS EN 13445-4:2002+A2:2006 | Unfired pressure vessels. Fabrication |
| BS EN 13445-4:2009 | Unfired pressure vessels. Fabrication |
| BS EN 13445-5:2002+A5:2006 | Unfired pressure vessels. Inspection and testing |
| BS EN 13445-5:2009 | Unfired pressure vessels. Inspection and testing |
| BS EN 13445-6:2002+A2:2006 | Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
| BS EN 13445-6:2009 | Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron |
| BS EN 13445-8:2006 | Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys |
| BS EN 13445-8:2009 | Unfired pressure vessels. Additional requirements for pressure vessels of aluminium and aluminium alloys |
| BS EN 13720:2002 | Transportable gas cylinders. Filling conditions for acetylene battery vehicles |
| BS EN 13769:2003 | Transportable gas cylinders. Cylinder bundles. Design, manufacture, identification and testing |
| BS EN 13799:2002 | Contents gauges for LPG tanks |
| BS EN 13807:2003 | Transportable gas cylinders. Battery vehicles. Design, manufacture, identification and testing |
| BS EN 13923:2005 | Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing |
| BS EN 13952:2003 | LPG equipment and accessories. Filling procedures for LPG cylinders |
| BS EN 14140:2003 | Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction |
| BS EN 14189:2003 | Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders |
| BS EN 14208:2004 | Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases Design and construction |
| BS EN 14276-1:2006 | Pressure equipment for refrigerating systems and heat pumps. Vessels. General requirements |
| BS EN 14276-2:2007 | Pressure equipment for refrigerating systems and heat pumps. Piping. General requirements |
| BS EN 1439:1997 | Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Procedure for checking before, during and after filling |
| BS EN 1439:2005 | LPG equipment and accessories. Transportable refillable welded and brazed steel liquefied petroleum gas (LPG) cylinders. Procedure for checking before, during and after filling |
| BS EN 1439:2008 | LPG equipment and accessories. Procedure for checking LPG cylinders before, during and after filling |
| BS EN 1440:2005 | LPG equipment and accessories. Transportable refillable welded and brazed steel liquefied petroleum gas (LPG) cylinders. Periodic inspection |
| BS EN 1440:2008 | LPG equipment and accessories. Periodic inspection of transportable refillable LPG cylinders |
| BS EN 14427:2004 | Transportable refillable fully wrapped composite cylinders for liquefied petroleum gases (LPG). Design and construction |
| BS EN 1442:1998 | Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Design and construction |
| BS EN 1442:2006+A1:2008 | LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Design and construction |
| BS EN 14513:2005 | Transportable gas cylinders. Bursting disc pressure relief devices (excluding acetylene gas cylinders) |
| BS EN 14570:2005 | Equipping of LPG tanks, overground and underground |
| BS EN 14638-1:2006 | Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres. Welded austenitic stainless steel cylinders made to a design justified by experimental methods |
| BS EN 14763:2005 | LPG equipment and accessories. Transportable refillable composite cylinders for liquefied petroleum gas (LPG). Procedure for checking before, during and after filling |
| BS EN 14767:2005 | LPG equipment and accessories. Transportable refillable composite cylinders for liquefied petroleum gas (LPG). Periodic inspection |
| BS EN 14794:2005 | LPG equipment and accessories. Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG). Procedure for checking before, during and after filling |
| BS EN 14795:2005 | LPG equipment and accessories. Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG). Periodic inspection |
| BS EN 14876:2007 | Transportable gas cylinders. Periodic inspection and testing of welded steel pressure drums |
| BS EN 14893:2006 | LPG equipment and accessories. Transportable liquefied petroleum gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1000 litres |
| BS EN 14894:2006 | LPG equipment and accessories. Cylinder and drum marking |
| BS EN 14913:2005 | LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Procedure for checking before, during and after filling |
| BS EN 14914:2005 | LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Periodic inspection |
| BS EN 1795:1998 | Transportable gas cylinders (excluding LPG). Procedures for change of gas service |
| BS EN 1800:1999 | Transportable gas cylinders. Acetylene cylinders. Basic requirements and definitions |
| BS EN 1800:2006 | Transportable gas cylinders. Acetylene cylinders. Basic requirements, definitions and type testing |
| BS EN 1801:1999 | Transportable gas cylinders. Filling conditions for single acetylene cylinders |
| BS EN 1802:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders |
| BS EN 1803:2002 | Transportable gas cylinders. Periodic inspection and testing of welded carbon steel gas cylinders |
| BS EN 1919:2000 | Transportable gas cylinders. Cylinders for liquefied gases (excluding acetylene and LPG). Inspection at time of filling |
| BS EN 1920:2000 | Transportable gas cylinders. Cylinders for compressed gases (excluding acetylene). Inspection at time of filling |
| BS EN 1964-1:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. Cylinders made of seamless steel with an Rm value of less than 1100 MPa |
| BS EN 1964-2:2001 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. Cylinders made of seamless steel with an Rm value of 1 100 MPa and above |
| BS EN 1964-3:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres. Cylinders made of seamless stainless steel with an Rm value of less than 1 100 MPa |
| BS EN 1968:2002 | Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders |
| BS EN 1975:2000 | Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre |
| BS EN 286-1:1991 | Simple unfired pressure vessels designed to contain air or nitrogen. Design, manufacture and testing |
| BS EN 286-1:1998+A2:2005 | Simple unfired pressure vessels designed to contain air or nitrogen. Pressure vessels for general purposes |
| BS EN 286-2:1992 | Simple unfired pressure vessels designed to contain air or nitrogen. Specification for pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
| BS EN 286-3:1995 | Simple unfired pressure vessels designed to contain air or nitrogen. Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| BS EN 286-4:1995 | Simple unfired pressure vessels designed to contain air or nitrogen. Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
| BS EN 417:2003 | Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances. Construction, inspection, testing and marking |
| BS EN 629-1:1996 | Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Specification |
| BS EN 629-2:1996 | Transportable gas cylinders. 25E taper thread for connection of valves to gas cylinders. Gauge inspection |
| BS EN 720-1:1999 | Transportable gas cylinders. Gases and gas mixtures. Properties of pure gases |
| BS EN 764-1:2004 | Pressure equipment. Terminology. Pressure, temperature, volume, nominal size |
| BS EN 764-2:2002 | Pressure equipment. Quantities, symbols and units |
| BS EN 764-3:2002 | Pressure equipment. Definition of parties involved |
| BS EN 764-4:2002 | Pressure equipment. Establishment of technical delivery conditions for metallic materials |
| BS EN 764-5:2002 | Pressure equipment. Compliance and inspection documentation of materials |
| BS EN 764-7:2002 | Pressure equipment. Safety systems for unfired pressure vessels |
| BS EN 764:1995 | Pressure equipment. Terminology and symbols. Pressure, temperature, volume |
| BS EN 850:1997 | Transportable gas cylinders. Pin-index, yoke-type valve outlet connections for medical use |
| BS EN 962:1997 | Transportable gas cylinders. Valve protection caps and valve guards for industrial and medical gas cylinders. Design, construction and tests |
| BS EN ISO 10156-2:2005 | Gas cylinders. Gases and gas mixtures. Determination of oxidizing ability of toxic and corrosive gases and gas mixtures |
| BS EN ISO 10286:2007 | Gas cylinders. Terminology |
| BS EN ISO 10297:2006 | Transportable gas cylinders. Cylinder valves. Specification and type testing |
| BS EN ISO 10692-1:2001 | Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. Outlet connections |
| BS EN ISO 10692-2:2001 | Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. Specification and type testing for valve to cylinder connections |
| BS EN ISO 11114-1:1998 | Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Metallic materials |
| BS EN ISO 11114-2:2001 | Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Non-metallic materials |
| BS EN ISO 11114-3:1998 | Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Autogenous ignition test in oxygen atmosphere |
| BS EN ISO 11114-4:2005 | Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Test methods for selecting metallic materials resistant to hydrogen embrittlement |
| BS EN ISO 11117:2008 | Gas cylinders. Valve protection caps and valve guards. Design, construction and tests |
| BS EN ISO 11120:1999 | Gas cylinders. Refillable seamless steel tubes for compressed gas transport, of water capacity between 150l and 3000l. Design, construction and testing |
| BS EN ISO 11439:2000 | Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| BS EN ISO 11621:2005 | Gas cylinders. Procedures for change of gas service |
| BS EN ISO 11623:2002 | Transportable gas cylinders. Periodic inspection and testing of composite gas cylinders |
| BS EN ISO 12209-1:2001 | Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Yoke type connections |
| BS EN ISO 12209-2:2001 | Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Threaded connections |
| BS EN ISO 12209-3:2001 | Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air. Adaptor for 230 bar valves |
| BS EN ISO 13340:2001 | Transportable gas cylinders. Cylinder valves for non-refillable cylinders. Specification and prototype testing |
| BS EN ISO 13341:1998 | Transportable gas cylinders. Fitting of valves to gas cylinders |
| BS EN ISO 13769:2006 | Gas cylinders. Stamp marking |
| BS EN ISO 13769:2009 | Gas cylinders. Stamp marking |
| BS EN ISO 15245-1:2001 | Gas cylinders. Parallel threads for connection of valves to gas cylinders. Specification |
| BS EN ISO 15245-2:2001 | Gas cylinders. Parallel threads for connection of valves to gas cylinders. Gauge inspection |
| BS EN ISO 15996:2005+A1:2007 | Gas cylinders. Residual pressure valves. General requirements and type testing |
| BS EN ISO 16148:2006 | Gas cylinders. Refillable seamless gas cylinders. Acoustic emission testing (AT) for periodic inspection |
| BS EN ISO 21007-1:2005 | Gas cylinders. Identification and marking using radio frequency identification technology. Reference architecture and terminology |
| BS EN ISO 21007-2:2005 | Gas cylinders. Identification and marking using radio frequency identification technology. Numbering schemes for radio frequency identification |
| BS EN ISO 22435:2007 | Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing |
| BS EN ISO 7225:2007 | Gas cylinders. Precautionary labels |
| BS ISO 11625:2007 | Gas cylinders. Safe handling |
| BS ISO 14245:2006 | Gas cylinders. Specification and testing of LPG cylinder valves. Self-closing |
| BS ISO 15995:2006 | Gas cylinders. Specification and testing of LPG cylinder valves. Manually operated |
| BS ISO 16528-1:2007 | Boilers and pressure vessels. Performance requirements |
| BS ISO 16528-2:2007 | Boilers and pressure vessels. Procedures for fulfilling the requirements of ISO 16528-1 |
| BS ISO 18172-1:2007 | Gas cylinders. Refillable welded stainless steel cylinders Test pressure 6 MPa and below |
| BS ISO 18172-2:2007 | Gas cylinders. Refillable welded stainless steel cylinders Test pressure greater than 6 MPa |
| BS ISO 19078:2006 | Gas cylinders. Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| BS ISO 20703:2006 | Gas cylinders. Refillable welded aluminium-alloy cylinders Design, construction and testing |
| BS ISO 22434:2006 | Transportable gas cylinders. Inspection and maintenance of cylinder valves |
| BS ISO 24431:2006 | Gas cylinders. Cylinders for compressed and liquefied gases (excluding acetylene). Inspection at the time of filling |
| BS ISO 25760:2009 | Gas cylinders. Operational procedures for the safe removal of valves from gas cylinders |
| BS ISO 3500:2005 | Gas cylinders. Seamless steel CO2 cylinders for fixed fire-fighting installations on ships |
| BS ISO 4706:2008 | Gas cylinders. Refillable welded steel cylinders. Test pressure 60 bar and below |
| BS ISO 5145:2004+A2:2008 | Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning |
| BS ISO/TR 12391-1:2001 | Gas cylinders. Refillable seamless steel. Performance tests. Philosophy, background and conclusions |
| BS ISO/TR 12391-2:2002 | Gas cylinders. Refillable seamless steel. Performance tests. Fracture performance tests. Monotonic burst tests |
| BS ISO/TR 12391-3:2002 | Gas cylinders. Refillable seamless steel. Performance tests. Fracture performance tests. Cyclical burst tests |
| BS ISO/TR 7470:1988 | Valve outlets for gas cylinders. List of provisions which are either standardized or in use |
| DD CEN/TS 764-6:2004 | Pressure equipment. Structure and content of operating instructions |
| KIT 203 | European Pressure Vessels |
| KIT 204 | European Pressure Vessels |
| PD 5500:2000 | Specification for unfired fusion welded pressure vessels |
| PD 5500:2003 | Specification for unfired fusion welded pressure vessels |
| PD 5500:2006+A3:2008 | Specification for unfired fusion welded pressure vessels |
| PD 5500:2009 | Specification for unfired fusion welded pressure vessels |
| PD 6433:1969 | Guide to the application of stress analysis to design |
| PD 6437:1969 | A review of design methods given in present standards and codes and design proposals for nozzles and openings in pressure vessels |
| PD 6439:1969 | A review of the methods of calculating stresses due to local loads and local attachments of pressure vessels |
| PD 6488:1979 | Gas cylinder valve outlets in use within the countries of ISO member bodies |
| PD 6497:1982 | Stresses in horizontal cylindrical pressure vessels supported on twin saddles: a derivation of the basic equations and constants used in G.3.3 of BS 5500:1982 |
| PD 6510:1983 | A review of the present state of the art of assessing remanent life of pressure vessels and pressurized systems designed for high temperature service |
| PD 6539:1994 | Guide to methods for the assessment of the influence of crack growth on the significance of defects in components operating at high temperatures |
| PD 6550-1:1989 | Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design. Domed ends (heads) |
| PD 6550-2:1989 | Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design. Openings and branch connections |
| PD 6550-3:1989 | Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design. Vessels under external pressure |
| PD CEN/TR 13445-9:2007 | Unfired pressure vessels. Conformance of the EN 13445 series to ISO 16528 |
| PD CEN/TR 15444:2006 | Transportable gas cylinders. Gas cylinders conforming to the TPED to be used for PED applications. Applicability and justifications |
| PD CR 13445-7:2002 | Unfired pressure vessels. Guidance on the use of the conformity procedures |
| PD CR 14473:2002 | Transportable gas cylinders. Porous masses for acetylene cylinders |
| PD ISO/TR 22694:2008 | Gas cylinders. Methods for establishing acceptance/ rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing |
| TH 20344 | Boilers and Pressure Vessels. An international survey of design and approval requirements |
