| BS 4481-1:1989* ISO 525-1986 | Bonded abrasive products. Specification for general features of abrasive wheels, segments, bricks and sticks |
| BS 4481-2:1983 | Bonded abrasive products. Specification for dimensions of grinding wheels and segments |
| BS 4481-3:1988* ISO 6103-1986 | Bonded abrasive products. Method for assessment of static balancing of abrasive wheels |
| BS 4581-2:1984 | Flanges for mounting grinding wheels on grinding machine tools. Specification for dimensions and materials of flanges for grinding wheels of less than 76.2 mm bore |
| BS 4581:Part 1:1970 | Flanges for mounting grinding wheels on grinding machine tools. Specification for dimensions of flanges for grinding wheels of 76.2 mm bore and greater |
| BS 5367:1976 | Dimensions of coated abrasives |
| BS 5587:1978* ISO 5429:1977 | Specification for coated abrasives. Flap wheels with incorporated flanges or separate flanges. Designation and dimensions |
| BS 5831:1979* ISO 6104-1979 | Specification for designation and multilingual nomenclature for diamond or cubic boron nitride grinding wheels and saws |
| BS 5851:1980* ISO 6106-1979 | Specification for grain sizes of diamond or cubic boron nitride |
| BS 7007-1:1988* ISO 2422:1986 | Abrasive products. Specification for dimensions and designation of truncated cone abrasive sleeves |
| BS 7007-2:1994* ISO 3919:1993 | Abrasive products. Specification for designation and dimensions of coated abrasive flap wheels with shafts |
| BS 7007-3:1988* ISO 8366:1987 | Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products |
| BS 7007-5:1994* ISO 1929:1993 | Abrasive products. Specification for dimensions, tolerances and designation of abrasive belts |
| BS 7007-6:1994* ISO 2235:1993 | Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets |
| BS 7425-1:1991* ISO 9136:1989 | Abrasive grains. Method for the determination of the bulk density of macrograins |
| BS 7425-2:1991* ISO 9137:1990 | Abrasive grains. Method for determining the capillarity |
| BS 7425-3:1993* ISO 9138:1993 | Abrasive grains. Method for sampling and splitting |
| BS 7425-4:1993* ISO 9284:1992 | Abrasive grains. Specification for test-sieving machines |
| BS 871:1981 | Specification for abrasive papers and cloths |
| BS EN 1083-1:1997 | Power-driven brushes. Definitions and nomenclature |
| BS EN 1083-2:1997 | Power-driven brushes. Safety requirements |
| BS EN 12413:1999 | Safety requirements for bonded abrasive products |
| BS EN 12413:2007 | Safety requirements for bonded abrasive products |
| BS EN 13236:2001 | Safety requirements for superabrasives |
| BS EN 13743:2002 | Safety requirements for coated abrasives |
| BS EN 13743:2009 | Safety requirements for coated abrasive products |
| BS EN ISO 11126-10:2004* BS 7079-F10:2004 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Almandite garnet |
| BS EN ISO 6103:1999 | Bonded abrasive products. Permissible unbalances of grinding wheels as delivered. Testing |
| BS EN ISO 6103:2005 | Bonded abrasive products. Permissible unbalances of grinding wheels as delivered. Static testing |
| BS ISO 13942:2000 | Bonded abrasive products. Limit deviations and run-out tolerances |
| BS ISO 15635:2001 | Coated abrasives. Flap discs |
| BS ISO 15636:2003 | Back-up pads for vulcanized fibre discs |
| BS ISO 15637-1:2002 | Holding fixtures of cylindrical abrasive sleeves. Holding fixtures with shank for hand-held grinding machines |
| BS ISO 15637-2:2002 | Holding fixtures of cylindrical abrasive sleeves. Holding fixtures for stationary machines |
| BS ISO 16057:2002 | Coated abrasives. Vulcanized fibre discs |
| BS ISO 21537-1:2004 | Clamping flanges for superabrasive cutting-off wheels. Natural stone. Natural stone |
| BS ISO 21537-2:2004 | Clamping flanges for superabrasive cutting-off wheels. Building and construction |
| BS ISO 21538:2004 | Blanks for superabrasive cutting-off wheels. Mounting and fixing bores. Building construction and civil engineering |
| BS ISO 21948:2001 | Coated abrasives. Plain sheets |
| BS ISO 21949:2001 | Coated abrasives. Plain sheets with holes for dust extraction |
| BS ISO 21950:2001 | Coated abrasives. Plain discs |
| BS ISO 21951:2001 | Coated abrasives. Plain discs with holes for dust extraction |
| BS ISO 22917:2004 | Superabrasives. Limit deviations and run out tolerances for grinding wheels with diamond or cubic boron nitride |
| BS ISO 2421:2003 | Coated abrasives. Cylindrical sleeves |
| BS ISO 2976:2005 | Coated abrasives. Abrasive belts. Selection of width/length combinations |
| BS ISO 3366:1999 | Coated abrasives. Abrasive rolls |
| BS ISO 3919:2005 | Coated abrasives. Flap wheels with shaft |
| BS ISO 525:1999 | Bonded abrasive products. General requirements. Part 1 : Specification for general features of abrasive wheels, segments, bricks and sticks |
| BS ISO 5429:2005 | Coated abrasives. Flap wheels with incorporated flanges or separate flanges |
| BS ISO 603-10:1999 | Bonded abrasive products. Dimensions. Stones for honing and superfinishing |
| BS ISO 603-11:1999 | Bonded abrasive products. Dimensions. Hand finishing sticks |
| BS ISO 603-12:1999 | Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling on a straight grinder |
| BS ISO 603-13:1999 | Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling on a vertical grinder |
| BS ISO 603-14:1999 | Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling/snagging on an angle grinder |
| BS ISO 603-15:1999 | Bonded abrasive products. Dimensions. Grinding wheels for cutting-off on stationary or mobile cutting-off machines |
| BS ISO 603-16:1999 | Bonded abrasive products. Dimensions. Grinding wheels for cutting-off on hand-held power tools |
| BS ISO 603-1:1999 | Bonded abrasive products. Dimensions. Grinding wheels for external cylindrical grinding between centres |
| BS ISO 603-2:1999 | Bonded abrasive products. Dimensions. Grinding wheels for centreless external cylindrical grinding |
| BS ISO 603-3:1999 | Bonded abrasive products. Dimensions. Grinding wheels for internal cylindrical grinding |
| BS ISO 603-4:1999 | Bonded abrasive products. Dimensions. Grinding wheels for surface grinding/peripheral grinding |
| BS ISO 603-5:1999 | Bonded abrasive products. Dimensions. Grinding wheels for surface grinding/face grinding |
| BS ISO 603-6:1999 | Bonded abrasive products. Dimensions. Grinding wheels for tool and toolroom grinding |
| BS ISO 603-7:1999 | Bonded abrasive products. Dimensions. Grinding wheels for manually guided grinding |
| BS ISO 603-8:1999 | Bonded abrasive products. Dimensions. Grinding wheels for deburring and fettling/snagging |
| BS ISO 603-9:1999 | Bonded abrasive products. Dimensions. Grinding wheels for high pressure grinding |
| BS ISO 6104:2005 | Superabrasive products. Rotating grinding tools with diamond or cubic boron nitride. General survey, designation and multilingual nomenclature |
| BS ISO 6105-1:2004 | Blanks for superabrasive cutting-off wheels. Manually guided cutting-off in building and civil engineering |
| BS ISO 6105-2:2004 | Blanks for superabrasive cutting-off wheels. Hand-held cutting-off in building and civil engineering |
| BS ISO 6106:2005 | Abrasive products. Checking the grit size of superabrasives |
| BS ISO 6344-1:1998 | Coated abrasives. Grain size analysis. Grain size distribution test |
| BS ISO 6344-2:1998 | Coated abrasives. Grain size analysis. Determination of grain size distribution of macrogrits P12 to P220 |
| BS ISO 6344-3:1998 | Coated abrasives. Grain size analysis. Determination of grain size distribution of microgrits P240 to P2500 |
| BS ISO 666:1996 | Machine tools. Mounting of plain grinding wheels by means of hub flanges |
| BS ISO 8486-1:1996 | Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220 |
| BS ISO 8486-2:1996 | Bond abrasives. Determination and designation of grain size distribution. Macrogrits F230 to F1200 |
| BS ISO 8486-2:2007 | Bonded abrasives. Determination and designation of grain size distribution. Microgrits F230 to F2000 |
| BS ISO 9136-1:2004 | Abrasive grains. Determination of bulk density. Macrogrits |
| BS ISO 9136-2:2000 | Abrasive grains. Determination of bulk density. Microgrits |
| BS ISO 9285:1997 | Abrasive grains and crude. Chemical analysis of fused aluminium oxide |
| BS ISO 9286:1997 | Abrasive grains and crude. Chemical analysis of silicon carbide |
