| BS 3416:1991 | Specification for bitumen-based coatings for cold application, suitable for use in contact with potable water |
| BS 4147:1980 | Specification for bitumen-based hot-applied coating materials for protecting iron and steel, including suitable primers where required |
| BS 4164:1987 | Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer |
| BS 4164:2002 | Specification for coal-tar-based hot-applied coating materials for protecting iron and steel, including a suitable primer |
| BS 4842:1984 | Specification for liquid organic coatings for application to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with liquid organic coatings |
| BS 6374-1:1985 | Lining of equipment with polymeric materials for the process idustries. Specification for lining with sheet thermoplastics |
| BS 6374-2:1984 | Lining of equipment with polymeric materials for the process industries. Specification for lining with non-sheet applied thermoplastics |
| BS 6374-3:1984 | Lining of equipment with polymeric materials for the process industries. Specification for lining with stoved thermosetting resins |
| BS 6374-4:1984 | Lining of equipment with polymeric materials for the process industries. Specification for lining with cold curing thermosetting resins |
| BS 6374-5:1985 | Lining of equipment with polymeric materials for the process industries. Specification for lining with rubbers |
| BS 6496:1984 | Specification for powder organic coatings for application and stoving to aluminium alloy extrusions, sheet and preformed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings |
| BS 6497:1984 | Specification for powder organic coatings for application and stoving to hot-dip galvanized hot-rolled steel sections and preformed steel sheet for windows and associated external architectural purposes, and for the finish on galvanized steel sections and preformed sheet coated with powder organic coatings |
| BS 6949:1991 | Specification for bitumen-based coatings for cold application excluding use in contact with potable water |
| BS 7295-2:1990 | Fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete. Specification for coatings |
| BS 7892:1997 | Specification for bitumen seal coatings on cement mortar linings in ductile iron pipes and fittings |
| BS 7892:2000 | Specification for seal coats on cement mortar lined ductile iron pipes and fittings |
| BS 8202:Part 1:1987 | Coatings for fire protection of building elements. Code of practice for the selection and installation of sprayed mineral coatings |
| BS EN 10169-1:1997 | Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods) |
| BS EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods) |
| BS EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products. Products for building exterior applications |
| BS EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products. Products for building interior applications |
| BS EN 10245-1:2001 | Steel wire and wire products. Organic coatings on steel wire. General rules |
| BS EN 10245-2:2001 | Steel wire and wire products. Organic coatings on steel wire. PVC finished wire |
| BS EN 10245-3:2001 | Steel wire and wire products. Organic coatings on steel wire. PE coated wire |
| BS EN 10245-4:2003 | Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire |
| BS EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings |
| BS EN 10289:2002 | Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings |
| BS EN 10290:2002 | Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings |
| BS EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating |
| BS EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas |
| BS EN 10310:2003 | Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings |
| BS EN 10339:2007 | Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection |
| BS EN 12068:1999 | Cathodic protection. External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection. Tapes and shrinkable materials |
| BS EN 13438:2005 | Paints and varnishes. Powder organic coatings for galvanized or sherardised steel products for construction purposes |
| BS EN 13523-0:2001 | Coil coated metals. Test methods. General introduction and list of test methods |
| BS EN 13523-10:2001 | Coil coated metals. Test methods. Resistance to fluorescent UV light and water condensation |
| BS EN 13523-11:2004 | Coil coated metals. Test methods. Resistance to solvents (rubbing test) |
| BS EN 13523-12:2004 | Coil coated metals. Test methods. Resistance to scratching |
| BS EN 13523-13:2001 | Coil coated metals. Test methods. Resistance to accelerated ageing by the use of heat |
| BS EN 13523-14:2001 | Coil coated metals. Test methods. Chalking (Helmen method) |
| BS EN 13523-15:2002 | Coil coated metals. Test methods. Metamerism |
| BS EN 13523-16:2004 | Coil coated metals. Test methods. Resistance to abrasion |
| BS EN 13523-17:2004 | Coil coated metals. Test methods. Adhesion of strippable films |
| BS EN 13523-18:2002 | Coil coated metals. Test methods. Resistance to staining |
| BS EN 13523-19:2004 | Coil coated metals. Test methods. Panel design and method of atmospheric exposure testing |
| BS EN 13523-1:2001 | Coil coated metals. Test methods. Coating thickness |
| BS EN 13523-20:2004 | Coil coated metals. Test methods. Foam adhesion |
| BS EN 13523-21:2003 | Coil coated metals. Test methods. Evaluation of outdoor exposed panels |
| BS EN 13523-22:2003 | Coil coated metals. Test methods. Colour difference. Visual comparison |
| BS EN 13523-23:2002 | Coil coated metals. Test methods. Colour stability in humid atmospheres containing sulfur dioxide |
| BS EN 13523-24:2004 | Coil coated metals. Test methods. Resistance to blocking and pressure marking |
| BS EN 13523-25:2006 | Coil coated metals. Test methods. Resistance to humidity |
| BS EN 13523-26:2006 | Coil coated metals. Test methods. Resistance to condensation of water |
| BS EN 13523-2:2001 | Coil coated metals. Test methods. Specular gloss |
| BS EN 13523-3:2001 | Coil coated metals. Test methods. Colour difference. Instrumental comparison |
| BS EN 13523-4:2001 | Coil coated metals. Test methods. Pencil hardness |
| BS EN 13523-5:2001 | Coil coated metals. Test methods. Resistance to rapid deformation (impact test) |
| BS EN 13523-6:2002 | Coil coated metals. Test methods. Adhesion after indentation (cupping test) |
| BS EN 13523-7:2001 | Coil coated metals. Test methods. Resistance to cracking on bending (T-bend test) |
| BS EN 13523-8:2002 | Coil coated metals. Test methods. Resistance to salt spray (fog) |
| BS EN 13523-9:2001 | Coil coated metals. Test methods. Resistance to water immersion |
| BS EN 14879-1:2005 | 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Terminology, design and preparation of substrate |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Coatings on metallic components |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Coatings on concrete components |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Linings on metallic components |
| BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media. Linings on concrete components |
| BS EN 14901:2006 | Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods |
| BS EN 15189:2006 | Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods |
| BS EN ISO 21809-2:2007 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Fusion-bonded epoxy coatings |
| BS ISO 14656:1999 | Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
| DD ENV 10169-2:1999 | Continuously organic coated (coil coated) steel flat products. Products for building exterior applications |
