| BS 1133-6.1:1991 | Packaging code. Protection of metal surfaces against corrosion during transport and storage. Cleaning and drying of metal surfaces |
| BS 7079-0:1990 | Preparation of steel substrates before application of paints and related products. Introduction |
| BS 7079-A3:2002* ISO 8501-3:2001 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of welds, cut edges and other areas with surface imperfections. A3: Preparation grades of welds, cut edges and other areas with surface imperfections |
| BS 7079-D1:1993* ISO 8504-1:1992 | Preparation of steel substrates before application of paints and related products. Methods for surface preparation. General principles |
| BS 7079-D2:1993* ISO 8504-2:1992 | Preparation of steel substrates before application of paints and related products. Methods for surface preparation. Abrasive blast-cleaning |
| BS 7079:2009 | General introduction to standards for preparation of steel substrates before application of paints and related products |
| BS 7079:Part A1:Supplement 1:1989 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives |
| BS 7079:Part F1:1994* ISO 11126-1:1993 | Preparation of steel substrates before application of paints and related products. Non-metallic blast-cleaning abrasives. General introduction and classification |
| BS 7773:1995 | Code of practice for cleaning and preparation of metal surfaces |
| BS EN 12373-2:1999 | Aluminium and aluminium alloys. Anodizing. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method |
| BS EN 12373-6:1999 | Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment |
| BS EN 12921-1:2005 | Machines for surface cleaning and pretreatment of industrial items using liquids or vapours. Common safety requirements |
| BS EN 12921-2:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using water based cleaning liquids |
| BS EN 12921-3:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using flammable cleaning liquids |
| BS EN 12921-4:2005+A1:2008 | Machines for surface cleaning and pretreatment of industrial items using liquids and vapours. Safety of machines using halogenated solvents |
| BS EN 13507:2001 | Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| BS EN 60335-2-79:1998 | Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for high pressure cleaners and steam cleaners for industrial and commercial use |
| BS EN ISO 11124-1:1997 | Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. General introduction and classification |
| BS EN ISO 11124-2:1997* BS 7079-E2:1994 | Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Chilled-iron grit |
| BS EN ISO 11124-3:1997* BS 7079-E3:1994 | Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. High-carbon cast-steel shot and grit |
| BS EN ISO 11124-4:1997* BS 7079-E4:1994 | Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives. Low-carbon cast-steel shot |
| BS EN ISO 11125-1:1997* BS 7079-E6:1994 | Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling |
| BS EN ISO 11125-2:1997* BS 7079-E7:1994 | Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of particle size distribution |
| BS EN ISO 11125-3:1997* BS 7079-E8:1994 | Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of hardness |
| BS EN ISO 11125-4:1997* BS 7079-E9:1994 | Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of apparent density |
| BS EN ISO 11125-5:1997* BS 7079-E10:1994 | Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of percentage defective particles and of microstructure |
| BS EN ISO 11125-6:1997* BS 7079-E11:1994 | Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of foreign matter |
| BS EN ISO 11125-7:1997* BS 7079-E12:1994 | Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Determination of moisture |
| BS EN ISO 11126-10:2004* BS 7079-F10:2004 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Almandite garnet |
| BS EN ISO 11126-1:1997* BS 7079-F1:1997 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. General introduction and classification |
| BS EN ISO 11126-3:1998* BS 7079-F3:1994 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Copper refinery slag |
| BS EN ISO 11126-4:1998* BS 7079-F4:1994 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Coal furnace slag |
| BS EN ISO 11126-5:1998* BS 7079-F5:1994 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Nickel refinery slag |
| BS EN ISO 11126-6:1998* BS 7079-F6:1994 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Iron furnace slag |
| BS EN ISO 11126-7:2001 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Specification for fused aluminium oxide |
| BS EN ISO 11126-8:1998* BS 7079-F8:1994 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Olivine sand |
| BS EN ISO 11126-9:2004* BS 7079-F9:2004 | Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives. Staurolite |
| BS EN ISO 11127-1:1998* BS 7079-F11:1994 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling |
| BS EN ISO 11127-2:1998* BS 7079-F12:1994 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of particle size distribution |
| BS EN ISO 11127-3:1998* BS 7079-F13:1994 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of apparent density |
| BS EN ISO 11127-4:1998* BS 7079-F14:1994 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Assessment of hardness by a glass slide test |
| BS EN ISO 11127-5:1998* BS 7079-F15:1994 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of moisture |
| BS EN ISO 11127-6:1998* BS 7079-F16:1994 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble contaminants by conductivity measurement |
| BS EN ISO 11127-7:1998* BS 7079-F17:1994 | Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Determination of water-soluble chlorides |
| BS EN ISO 12944-4:1998 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Types of surface and surface preparation |
| BS EN ISO 3861:2008 | Rubber hoses for sand and grit blasting. Specification |
| BS EN ISO 8501-1:2001 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| BS EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| BS EN ISO 8501-1:Supplement:2001* BS 7079-A1:Supplement 1:1996 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives |
| BS EN ISO 8501-2:2001* BS 7079-A2:1996 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| BS EN ISO 8501-3:2007* BS 7079-A3:2006 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of welds, edges and other areas with surface imperfections |
| BS EN ISO 8501-4:2006 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting |
| BS EN ISO 8502-10:2004* BS 7079-B10:2004 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the titrimetric determination of water-soluble chloride |
| BS EN ISO 8502-11:2006* BS 7079-B11:2006 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the turbidimetric determination of water-soluble sulfate |
| BS EN ISO 8502-12:2004* BS 7079-B12:2004 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the titrimetric determination of water-soluble ferrous ions |
| BS EN ISO 8502-2:2000 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces |
| BS EN ISO 8502-2:2005 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Laboratory determination of chloride on cleaned surfaces |
| BS EN ISO 8502-3:2000 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| BS EN ISO 8502-4:2000 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Guidance on the estimation of the probability of condensation prior to paint application |
| BS EN ISO 8502-5:2004* 7079-B5:2004 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) |
| BS EN ISO 8502-6:2000 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Extraction of soluble contaminants for analysis. The Bresle method |
| BS EN ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Extraction of soluble contaminants for analysis. The Bresle method |
| BS EN ISO 8502-8:2004* BS 7079-B8:2004 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the refractometric determination of moisture |
| BS EN ISO 8502-9:2001* BS 7079-B9:1998 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field method for the conductometric determination of water-soluble salts |
| BS EN ISO 8503-1:1995* BS 7079-C1:1989 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| BS EN ISO 8503-2:1995* BS 7079-C2:1989 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure |
| BS EN ISO 8503-3:1995* BS 7079-C3:1989 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure |
| BS EN ISO 8503-4:1995* BS 7079-C4:1989 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure |
| BS EN ISO 8503-5:2004* BS 7079-C5:2004 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Replica tape method for the determination of the surface profile |
| BS EN ISO 8504-1:2001* BS 7079-D1:2000 | Preparation of steel substrates before application of paints and related products. Surface preparation methods. General principles |
| BS EN ISO 8504-2:2001* BS 7079-D2:2000 | Preparation of steel substrates before application of paints and related products. Surface preparation methods. Abrasive blast cleaning |
| BS EN ISO 8504-3:2001* BS 7079-D3:1993 | Preparation of steel substrates before application of paints and related products. Surface preparation methods. Hand- and power-tool cleaning |
| DD ENV ISO 8502-1:2001 | Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Field test for soluble iron corrosion products |
| DD ISO/TR 15235:2001 | Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contamination |
