| BS 3189:1991* ISO 9717:1990 | Method for specifying phosphate conversion coatings for metals |
| BS 3987:1991 | Specification for anodic oxidation coatings on wrought aluminium for external architectural applications |
| BS 4479-3:1990 | Design of articles that are to be coated. Recommendations for conversion coatings |
| BS 4479-5:1990 | Design of articles that are to be coated. Recommendations for anodic oxidation coatings |
| BS 4479-7:1990 | Design of articles that are to be coated. Recommendations for thermally sprayed coatings |
| BS 5599:1993 | Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes |
| BS 6161-11:1985 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of total reflectance using a photoelectric reflectometer |
| BS 6161-12:1987 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of specular reflectance and specular gloss at angles of 20°, 45°, 60° or 85° |
| BS 6161-13:1993* ISO 10215:1992 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Visual determination of image clarity. Chart scale method |
| BS 6161-14:1987 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of infra-red reflectance |
| BS 6161-15:1987 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of electrical breakdown potential |
| BS 6161-16:1990* ISO 8993:1989 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method |
| BS 6161-17:1990* ISO 8994:1989 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Grid method |
| BS 6161-18:1991 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of surface abrasion resistance |
| BS 6161-19:1993* ISO 10216:1992 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of image clarity. Instrumental method |
| BS 6161-4:1981* ISO 2932:1981 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution |
| BS 6161-7:1984 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light |
| BS 6161:Part 10:1987 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of mean specific abrasion resistance with an abrasive jet test apparatus |
| BS 6161:Part 1:1984* ISO 2106-1982 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings (gravimetric method) |
| BS 6161:Part 2:1981* ISO 2128-1976 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of thickness of anodic oxide coatings: non-destructive measurement by split-beam microscope |
| BS 6161:Part 3:1984* ISO 3210-1983 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in phosphoric-chromic acid solution |
| BS 6161:Part 5:1982* ISO 2143-1981 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Estimation of loss of absorptive power of sealed coatings: dye spot test with prior acid treatment |
| BS 6161:Part 6:1984* ISO 2931-1983 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Assessment of sealing quality by measurement of admittance or impedance |
| BS 6161:Part 8:1981* ISO 6581-1980 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination of the fastness to ultraviolet light of coloured anodic oxide coatings |
| BS 6161:Part 9:1987 | Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of wear properties with an abrasive wheel wear test apparatus |
| BS 6338:1982* ISO 4520-1981 | Specification for chromate conversion coatings on electroplated zinc and cadmium coatings |
| BS EN 10329:2005 | Steel tubes and fittings for onshore and offshore pipelines. External field joint coatings |
| BS EN 12373-10:1999 | Aluminium and aluminium alloys. Anodizing. Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus |
| BS EN 12373-11:2001 | Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60°, and 85° |
| BS EN 12373-12:2001 | Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| BS EN 12373-13:2001 | Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
| BS EN 12373-14:2001 | Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method |
| BS EN 12373-15:2001 | Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation |
| BS EN 12373-16:2001 | Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test |
| BS EN 12373-17:2001 | Aluminium and aluminium alloys. Anodizing. Determination of electric breakdown potential |
| BS EN 12373-18:2001 | Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Chart method |
| BS EN 12373-19:2001 | Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Grid method |
| BS EN 12373-1:2001 | Aluminium and aluminium alloys. Anodizing. Method for specifying decorative and protective anodic oxidation coatings on aluminium |
| BS EN 12373-3:1999 | Aluminium and aluminium alloys. Anodizing. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope |
| BS EN 12373-4:1999 | Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment |
| BS EN 12373-5:1999 | Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance |
| BS EN 12373-7:1999 | Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
| BS EN 12373-7:2002 | Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment |
| BS EN 12373-8:1999 | Aluminium and aluminium alloys. Anodizing. Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings |
| BS EN 12373-9:1999 | Aluminium and aluminium alloys. Anodizing. Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus |
| BS EN 12476:2000 | Phosphate conversion coatings of metals. Method of specifying requirements |
| BS EN 12487:2000 | Corrosion protection of metals. rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| BS EN 1274:1997 | Thermal spraying. Powders. Composition. Technical supply conditions |
| BS EN 1274:2004 | Thermal spraying. Powders. Composition, technical supply conditions |
| BS EN 12921-1:2005 | Machines for surface cleaning and pretreatment of industrial items using liquids or vapours. Common safety requirements |
| BS EN 12921-2:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using water based cleaning liquids |
| BS EN 12921-3:2005+A1:2008 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours. Safety of machines using flammable cleaning liquids |
| BS EN 12921-4:2005+A1:2008 | Machines for surface cleaning and pretreatment of industrial items using liquids and vapours. Safety of machines using halogenated solvents |
| BS EN 13214:2001 | Thermal spraying. Thermal spray coordination. Tasks and responsibilities |
| BS EN 13887:2003 | Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
| BS EN 1395-1:2007 | Thermal spraying. Acceptance inspection of thermal spraying equipment. General requirements |
| BS EN 1395-2:2007 | Thermal spraying. Acceptance inspection of thermal spraying equipment. Flame spraying including HVOF |
| BS EN 1395-3:2007 | Thermal spraying. Acceptance inspection of thermal spraying equipment. Arc spraying |
| BS EN 1395-4:2007 | Thermal spraying. Acceptance inspection of thermal spraying equipment. Plasma spraying |
| BS EN 1395-5:2007 | Thermal spraying. Acceptance inspection of thermal spraying equipment. Plasma spraying in chambers |
| BS EN 1395-6:2007 | Thermal spraying. Acceptance inspection of thermal spraying equipment. Manipulator systems |
| BS EN 1395-7:2007 | Thermal spraying. Acceptance inspection of thermal spraying equipment. Powder feed system |
| BS EN 1395:1996 | Thermal spraying. Acceptance inspection of thermal spraying equipment |
| BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
| BS EN 14665:2004 | Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings |
| BS EN 15311:2007 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| BS EN 15339-2:2007 | Thermal spraying. Safety requirements for thermal spraying equipment. Gas control units |
| BS EN 15340:2007 | Thermal spraying. Determination of shear load resistance of thermally sprayed coatings |
| BS EN 15520:2007 | Thermal spraying. Recommendations for constructional design of components with thermally sprayed coatings |
| BS EN 15648:2009 | Thermal spraying. Component related procedure qualification |
| BS EN 22063:1994 | Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys |
| BS EN 50348:2002 | Automatic electrostatic spraying equipment for non-flammable liquid spraying material |
| BS EN 582:1994 | Thermal spraying. Determination of tensile adhesive strength |
| BS EN 657:1994 | Thermal spraying. Terminology, classification |
| BS EN 657:2005 | Thermal spraying. Terminology, classification |
| BS EN ISO 12085:1997 | Geometrical product specification (GPS). Surface texture. Profile method. Motif parameters |
| BS EN ISO 13565-2:1998 | Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the linear material ration curve |
| BS EN ISO 13565-3:2000 | Geometric Product Specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties. Height characterization using the material probability curve |
| BS EN ISO 1463:1995 | Metallic and oxide coatings. Measurement of coating thickness. Microscopical method |
| BS EN ISO 14918:1998 | Thermal spraying. Approval testing of thermal sprayers |
| BS EN ISO 14919:2001 | Thermal spraying, Wires, rods and cords for flame and arc spraying. Classification. Technical supply conditions |
| BS EN ISO 14920:1999 | Thermal spraying. Spraying and fusing of self-fluxing alloys |
| BS EN ISO 14921:2001 | Thermal spraying. Procedure for the application of thermally sprayed coatings for engineering components |
| BS EN ISO 14922-1:1999 | Thermal spraying. Quality requirements of thermally sprayed structures. Guidance for selection and use |
| BS EN ISO 14922-2:1999 | Thermal spraying. Quality requirements of thermally sprayed structures. Comprehensive quality requirements |
| BS EN ISO 14922-3:1999 | Thermal spraying. Quality requirements of thermally sprayed structures. Standard quality requirements |
| BS EN ISO 14922-4:1999 | Thermal spraying. Quality requirements of thermally sprayed structures. Elementary quality requirements |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| BS EN ISO 14924:2005 | Thermal spraying. Post-treatment and finishing of thermally sprayed coatings |
| BS EN ISO 17834:2003 | Thermal spraying. Coatings for protection against corrosion and oxidation at elevated temperatures |
| BS EN ISO 17836:2004 | Thermal spraying. Determination of the deposition efficiency |
| BS EN ISO 18332:2008 | Metallic and other inorganic coatings. Definitions and conventions concerning porosity |
| BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
| BS EN ISO 2064:1995 | Metallic and other non-organic coatings. Definitions and conventions concerning the measurement of thickness |
| BS EN ISO 2360:1995* ISO 2360-1982 | Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method |
| BS EN ISO 2360:2003 | Non-conductive coatings on non-magnetic electrically conductive basis materials. Measurement of coating thickness. Amplitude-sensitive eddy current method |
| BS EN ISO 3613:1995 | Chromate conversion coatings on zinc and cadmium. Test methods |
| BS EN ISO 3613:2001 | Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods |
| BS EN ISO 3868:1995 | Metallic and other non-organic coatings. Measurement of coating thicknesses. Fizeau multiple-beam interferometry method |
| BS EN ISO 3882:1995 | Metallic and other non-organic coatings. Review of methods of measurement of thickness |
| BS EN ISO 3882:2003 | Metallic and other inorganic coatings. Review of methods of measurement of thickness |
| BS EN ISO 3892:1995 | Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods |
| BS EN ISO 3892:2001 | Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods |
| BS ISO 11408:1999 | Chemical conversion coatings. Black oxide coating on iron and steel. Specification and test methods |
| BS ISO 15730:2000 | Metallic and other inorganic coatings. Electropolishing as a means of smoothing and passivating stainless steel |
| BS ISO 18332:2007 | Metallic and other inorganic coatings. Definitions and conventions concerning porosity |
| BS ISO 27830:2008 | Metallic and other inorganic coatings. Guidelines for specifying metallic and inorganic coatings |
| BS ISO 27831-1:2008 | Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces. Ferrous metals and alloys |
| BS ISO 27831-2:2008 | Metallic and other inorganic coatings. Cleaning and preparation of metal surfaces. Non-ferrous metals and alloys |
| BS ISO 4287:1997 | Geometric product specifications (GPS). Surface texture: profile method. Terms, definitions and surface texture parameters |
| BS ISO 9587:2007 | Metallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| BS ISO 9588:2007 | Metallic and other inorganic coatings. Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
