| BS 2600:Part 1:1983 | Radiographic examination of fusion welded butt joints in steel. Methods for steel 2 mm up to and including 50 mm thick |
| BS 2600:Part 2:1973 | Radiographic examination of fusion welded butt joints in steel. Methods for steel over 50 mm up to and including 200 mm thick |
| BS 2704:1978 | Specification for calibration blocks for use in ultrasonic flaw detection |
| BS 3451:1973 | Methods of testing fusion welds in aluminium and aluminium alloys |
| BS 3923-2:1972 | Methods for ultrasonic examination of welds. Automatic examination of fusion welded butt joints in ferritic steels |
| BS 3923:Part 1:1986 | Methods for ultrasonic examination of welds. Methods for manual examination of fusion welds in ferritic steels |
| BS 4206:1967 | Methods of testing fusion welds in copper and copper alloys |
| BS 499:Part 2:1980 | Welding terms and symbols. Specification for symbols for welding |
| BS 5289:1976 | Code of practice. Visual inspection of fusion welded joints |
| BS 6084-1:1997 | Methods for the evaluation of prefabrication primers. Rating and weldability tests |
| BS 6084:1981 | Method of test for comparison of prefabrication primers by porosity rating in arc welding |
| BS 7009:1988 | Guide to application of real-time radiography to weld inspection |
| BS 709:1983 | Methods of destructive testing fusion welded joints and weld metal in steel |
| BS 7257:1989 | Methods for radiographic examination of fusion welded branch and nozzle joints in steel |
| BS 7363:1990 | Method for bead-on-plate (BOP) test for welds |
| BS 7448-2:1997 | Fracture mechanics toughness tests. Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
| BS 7706:1993 | Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for the detection, location and sizing of flaws |
| BS 7910:1999 | Guide on methods for assessing the acceptability of flaws in metallic structures |
| BS 7910:2005 | Guide to methods for assessing the acceptability of flaws in metallic structures |
| BS EN 10246-10:2000 | Non-destructive testing of steel tubes. Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
| BS EN 10246-16:2000 | Non-destructive testing of steel tubes. Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections |
| BS EN 10246-8:2000 | Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| BS EN 10246-9:2000 | Non-destructive testing of steel tubes. Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| BS EN 1043-1:1996 | Destructive tests on welds in metallic materials. Hardness testing. Hardness test on arc welded joints |
| BS EN 1043-2:1997 | Destructive tests on welds in metallic materials. Hardness testing. Micro hardness testing on welded joints |
| BS EN 12062:1998 | Non-destructive examination of welds. General rules for metallic materials |
| BS EN 12345:1999 | Welding. Multilingual terms for welded joints with illustrations |
| BS EN 12517-1:2006 | Non-destructive testing of welds. Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography. Acceptance levels |
| BS EN 12517-2:2008 | Non-destructive testing of welds. Evaluation of welded joints in aluminium and its alloys by radiography. Acceptance levels |
| BS EN 12517:1998 | Non-destructive testing of welds. Radiographic testing of welded joints. Acceptance levels |
| BS EN 12732:2000 | Gas supply systems. Welding steel pipework. Functional requirements |
| BS EN 12814-1:2000 | Testing of welded joints of thermoplastics semi-finished products. Bend test |
| BS EN 12814-2:2000 | Testing of welded joints of thermoplastics semi-finished products. Tensile test |
| BS EN 12814-3:2000 | Testing of welded joints of thermoplastics semi-finished products. Tensile creep test |
| BS EN 12814-4:2001 | Testing of welded joints of thermoplastics semi-finished products. Peel test |
| BS EN 12814-5:2000 | Testing of welded joints of thermoplastics semi-finished products. Macroscopic examination |
| BS EN 12814-6:2000 | Testing of welded joints of thermoplastics semi-finished products. Low temperature tensile test |
| BS EN 12814-7:2002 | Testing of welded joints of thermoplastics semi-finished products. Tensile test with waisted test specimens |
| BS EN 12814-8:2001 | Testing of welded joints of thermoplastic semi-finished products -. Requirements |
| BS EN 1289:1998 | Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels |
| BS EN 1290:1998 | Non-destructive examination of welds. Magnetic particle examination of welds |
| BS EN 1291:1998 | Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels |
| BS EN 13100-1:2000 | Non destructive testing of welded joints of thermoplastics semi-finished products. Visual examination |
| BS EN 13100-2:2004 | Non destrictive testing of welded joints of thermoplastics semi-finished products. X-ray radiographic testing |
| BS EN 13100-3:2004 | Non-destructive testing of welded joints in thermoplastics semi-finished products. Ultrasonic testing |
| BS EN 1320:1997 | Destructive tests on welds in metallic materials. Fracture tests |
| BS EN 1321:1997 | Destructive test on welds in metallic materials. Macroscopic and microscopic examination of welds |
| BS EN 1435:1997 | Non-destructive examination of welds. Radiographic examination of welded joints |
| BS EN 14728:2005 | Imperfections in thermoplastic welds. Classification |
| BS EN 15617:2009 | Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels |
| BS EN 1708-1:1999 | Welding. Basic weld joint details in steel. Pressurized components |
| BS EN 1708-2:2000 | Welding. Basic weld joint details in steel. Non-internal pressurized components |
| BS EN 1711:2000 | Non-destructive examination of welds. Eddy current examination of welds by complex plane analysis |
| BS EN 1712:1997 | Non-destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels |
| BS EN 1713:1998 | Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds |
| BS EN 1714:1998 | Non destructive testing of welded joints. Ultrasonic testing of welded joints |
| BS EN 22553:1995 | Welded, brazed and soldered joints. Symbolic representation on drawings |
| BS EN 2497:1990 | Specification for dry abrasive blasting of titanium and titanium alloys |
| BS EN 25817:1992* ISO 5817:1992 | Arc-welded joints in steel. Guidance on quality levels for imperfections |
| BS EN 26520:1992* ISO 6520:1982 | Classification of imperfections in metallic fusion welds, with explanations |
| BS EN 27963:1992* ISO 7963:1985 | Specification for calibration block No. 2 for ultrasonic examination of welds |
| BS EN 29692:1994* ISO 9692:1992 | Specification for metal-arc welding with covered electrode gas-shielded metal-arc welding and gas welding. Joint preparations for steel |
| BS EN 30042:1994* ISO 10042:1992 | Arc-welded joints in aluminium and its weldable alloys. Guidance on quality levels for imperfections |
| BS EN 875:1995 | Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination |
| BS EN 876:1995 | Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints |
| BS EN 895:1995 | Destructive tests on welds in metallic materials. Transverse tensile test |
| BS EN 910:1996 | Destructive tests on welds in metallic materials. Bend tests |
| BS EN 970:1997 | Non-destructive examination of fusion welds. Visual examination |
| BS EN IS0 22825:2006 | Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys |
| BS EN ISO 10042:2005 | Welding. Arc-welded joints in aluminium and its alloys. Quality levels for imperfections |
| BS EN ISO 10447:2007 | Resistance welding. Peel and chisel testing of resistance spot and projection welds |
| BS EN ISO 13919-1:1997 | Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections. Steel |
| BS EN ISO 13919-2:2001 | Welding. Electron and laser beam welded joints. Guidance on quality levels for imperfections. Aluminium and its weldable alloys |
| BS EN ISO 14270:2001 | Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
| BS EN ISO 14271:2001 | Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) |
| BS EN ISO 14272:2001 | Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds |
| BS EN ISO 14273:2001 | Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds |
| BS EN ISO 14323:2006 | Resistance spot welding and projection welds. Destructive testing of welds. Specimen dimensions and procedure for impact shear test and cross-tension testing |
| BS EN ISO 14324:2003 | Resistance spot welding. Destructive tests of welds. Method for the fatigue testing of spot welded joints |
| BS EN ISO 14329:2003 | Resistance welding. Destructive tests of welds. Failure types and geometric measurements for resistance spot, seam and projection welds |
| BS EN ISO 17641-1:2004 | Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. General |
| BS EN ISO 17641-2:2005 | Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Self-restraint tests |
| BS EN ISO 17642-1:2004 | Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. General |
| BS EN ISO 17642-2:2005 | Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. Self-restraint tests |
| BS EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes. Externally loaded tests |
| BS EN ISO 17653:2003 | Destructive tests on welds in metallic materials. Torsion test of resistance spot welds |
| BS EN ISO 17654:2003 | Destructive tests on welds in metallic materials. Resistance welding. Pressure test on resistance seam welds |
| BS EN ISO 17655:2003 | Destructive tests on welds in metallic materials. Method for taking samples for delta ferrite measurement |
| BS EN ISO 17659:2004 | Welding. Multilingual terms for welded joints with illustrations |
| BS EN ISO 18278-2:2004 | Resistance welding. Weldability. Alternative procedures for the assessment of steel sheets for spot welding |
| BS EN ISO 3690:2001 | Welding and allied processes. Determination of hydrogen content in ferritic steel arc weld metal |
| BS EN ISO 5817:2003 | Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections |
| BS EN ISO 5817:2007 | Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections |
| BS EN ISO 6520-1:1998 | Welding and allied processes. Classification of geometric imperfections in metallic materials. Fusion welding |
| BS EN ISO 6520-1:2007 | Welding and allied processes. Classification of geometric imperfections in metallic materials. Fusion welding |
| BS EN ISO 6947:1997 | Welds. Working positions. Definitions of angles of slope and rotation |
| BS EN ISO 9018:2003 | Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints |
| BS EN ISO 9692-1:2003 | Welding and allied processes. Recommendations for joint preparation. Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels |
| BS EN ISO 9692-3:2001 | Welding and allied processes. Joint preparation. Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| BS EN ISO 9692-4:2003 | Welding and allied processes. Joint preparation. Clad steels |
| BS ISO 14347:2008 | Fatigue. Design procedure for welded hollow-section joints Recommendations |
| BS ISO 22826:2005 | Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| BS ISO 24497-1:2007 | Non-destructive testing. Metal magnetic memory. Vocabulary |
| BS ISO 24497-2:2007 | Non-destructive testing. Metal magnetic memory. General requirements |
| BS ISO 24497-3:2007 | Non-destructive testing. Metal magnetic memory. Inspection of welded joints |
| DD CEN/TS 14751:2004 | Welding. Use of time-of-flight diffraction technique (TOFD) for examination of welds |
| PD 6493:1991 | Guidance on methods for assessing the acceptability of flaws in fusion welded structures |
| PD 6604:1997* CR 12361:1996 | Destructive tests on welds in metallic materials. Etchants for macroscopic and microscopic examination |
| PD CEN ISO/TR 17641-3:2005 | Destructive tests on welds in metallic materials. Hot cracking tests for weldments. Arc welding processes. Externally loaded tests |
| PD CEN/TR 14633:2003 | Welding. Working positions. Comparison of current international, European and US designations |
| PD CEN/TR 15135:2005 | Welding. Design and non-destructive testing of welds |
| PD CEN/TR 15235:2005 | Welding. Methods for assessing imperfections in metallic structures |
