| BS 1140:1993 | Specification for resistance spot welding of uncoated and coated low carbon steel |
| BS 1724:1990 | Specification for bronze welding by gas |
| BS 1821:1982 | Specification for class I oxy-acetylene welding of ferritic steel pipework for carrying fluids |
| BS 2630:1982 | Specification for resistance projection welding of uncoated low carbon steel sheet and strip using embossed projections |
| BS 2633:1987 | Specification for Class I arc welding of ferritic steel pipework for carrying fluids |
| BS 2640:1982 | Specification for Class II oxy-acetylene welding of carbon steel pipework for carrying fluids |
| BS 2910:1986 | Methods for radiographic examination of fusion welded circumferential butt joints in steel pipes |
| BS 2971:1991 | Specification for class II arc welding of carbon steel pipework for carrying fluids |
| BS 2996:1958 | Specification for the projection welding of low carbon wrought steel studs, bosses, bolts, nuts and annular rings |
| BS 3019-1:1984 | TIG welding. Specification for TIG welding of aluminium, magnesium and their alloys |
| BS 3256:1960 | Specification for small fusion-welded air reservoirs for road and railway vehicles |
| BS 3571-1:1985 | MIG welding. Specification for MIG welding of aluminium and aluminium alloys |
| BS 4204:1989 | Specification for flash welding of steel tubes for pressure applications |
| BS 4570:1985 | Specification for fusion welding of steel castings |
| BS 4677:1984 | Specification for arc welding of austenitic stainless steel pipework for carrying fluids |
| BS 5135:1984 | Specification for arc welding of carbon and carbon manganese steels |
| BS 6084:1981 | Method of test for comparison of prefabrication primers by porosity rating in arc welding |
| BS 6223:1990 | Specification for friction welding of joints in metals |
| BS 6265:1982 | Specification for resistance seam welding of uncoated and coated low carbon steel |
| BS 6944:1988 | Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications) |
| BS 6990:1989 | Code of practice for welding on steel pipes containing process fluids or their residuals |
| BS 7123:1989 | Specification for metal arc welding of steel for concrete reinforcement |
| BS 7475:1991 | Specification for fusion welding of austenitic stainless steels |
| BS 7670-2:1997 | Steel nuts and bolts for resistance projection welding. Specification for welding of weld nuts and weld bolts |
| BS EN 1011-1:1998 | Welding. Recommendations for welding of metallic materials. General guidance for arc welding |
| BS EN 1011-2:2001 | Welding. Recommendations for welding of metallic materials. Arc welding of ferritic steels |
| BS EN 1011-3:2000 | Welding. Recommendations for welding of metallic materials. Arc welding of stainless steels |
| BS EN 1011-4:2000 | Welding. Recommendations for welding of metallic materials. Arc welding of aluminium and aluminium alloys |
| BS EN 1011-5:2003 | Welding. Recommendations for welding of metallic materials. Welding of clad steel |
| BS EN 1011-6:2005 | Welding. Recommendations for welding of metallic materials. Laser beam welding |
| BS EN 1011-7:2004 | Welding. Recommendations for welding of metallic materials. Electron beam welding |
| BS EN 1011-8:2004 | Welding. Recommendations for welding of metallic materials. Welding of cast irons |
| BS EN 12584:1999 | Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts. Terminology |
| BS EN 13067:2003 | Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies |
| BS EN 14163:2001 | Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines |
| BS EN 1418:1998 | Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| BS EN 14587-1:2007 | Railway applications. Track. Flash butt welding of rails. New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| BS EN 14610:2004 | Welding and allied processes. Definitions of metal welding processes |
| BS EN 14730-1:2006 | Railway applications. Track. Aluminothermic welding of rails. Approval of welding processes |
| BS EN 14730-2:2006 | Railway applications. Track. Aluminothermic welding of rails. Qualifications of aluminothermic welders, approval of contractors and acceptance of welds |
| BS EN 15085-1:2007 | Railway applications. Welding of railway vehicles and components. General |
| BS EN 15085-2:2007 | Railway applications. Welding of railway vehicles and components. Quality requirements and certification of welding manufacturer |
| BS EN 15085-3:2007 | Railway applications. Welding of railway vehicles and components. Design requirements |
| BS EN 15085-4:2007 | Railway applications. Welding of railway vehicles and components. Production requirements |
| BS EN 15085-5:2007 | Railway applications. Welding of railway vehicles and components. Inspection, testing and documentation |
| BS EN 1598:1998 | Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes |
| BS EN 287-1:2004 | Qualification test of welders. Fusion welding. Steels |
| BS EN 288-1:1992 | Specification and approval of welding procedures for metallic materials. General rules for fusion welding |
| BS EN 288-2:1992 | Specification and approval of welding procedures for metallic materials. Welding procedures specification for arc welding |
| BS EN 288-3:1992 | Specification and approval of welding procedures for metallic materials. Welding procedure tests for the arc welding of steels |
| BS EN 288-4:1992 | Specification and approval of welding procedures for metallic materials. Welding procedure tests for the arc welding of aluminium and its alloys |
| BS EN 288-5:1995 | Specification and approval of welding procedures for metallic materials. Approval by using approved welding consumables for arc welding |
| BS EN 288-6:1995 | Specification and approval of welding procedures for metallic materials. Approval related to previous experience |
| BS EN 288-7:1995 | Specification and approval of welding procedures for metallic materials. Approval by a standard welding procedure for arc welding |
| BS EN 288-9:1999 | Specification and approval of welding procedures for metallic materials. Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines |
| BS EN 50444:2008 | Basic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes |
| BS EN 50445:2008 | Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) |
| BS EN 719:1994 | Welding co-ordination. Tasks and responsibilities |
| BS EN 729-1:1995 | Quality requirements for welding. Fusion welding of metallic materials. Guidelines for selection and use |
| BS EN 729-2:1995 | Quality requirements for welding. Fusion welding of metallic materials. Comprehensive quality requirements |
| BS EN 729-3:1995 | Quality requirements for welding. Fusion welding of metallic materials. Standard quality requirements |
| BS EN 729-4:1995 | Quality requirements for welding. Fusion welding of metallic materials. Elementary quality requirements |
| BS EN ISO 10882-1:2001 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of airborne particles |
| BS EN ISO 10882-2:2000 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of gases |
| BS EN ISO 11970:2007 | Specification and approval of welding procedures for production welding of steel castings |
| BS EN ISO 13916:1997 | Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
| BS EN ISO 13918:2008 | Welding. Studs and ceramic ferrules for arc stud welding |
| BS EN ISO 14327:2004 | Resistance welding. Procedures for determining the weldability lobe for resistance spot, projection and seam welding |
| BS EN ISO 14373:2007 | Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels |
| BS EN ISO 14554-1:2001 | Quality requirements for welding. Resistance welding of metallic materials. Comprehensive quality requirements |
| BS EN ISO 14554-2:2001 | Quality requirements for welding. Resistance welding of metallic materials. Elementary quality requirements |
| BS EN ISO 14555:1998 | Welding. Arc stud welding of metallic materials |
| BS EN ISO 14555:2006 | Welding. Arc stud welding of metallic materials |
| BS EN ISO 15011-1:2002 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of emission rate and sampling for analysis of particulate fume |
| BS EN ISO 15011-2:2003 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of emission rates of gases, except ozone |
| BS EN ISO 15011-3:2002 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc welding. Determination of ozone concentration using fixed point measurements |
| BS EN ISO 15011-4:2006 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Fume data sheets |
| BS EN ISO 15012-1:2004 | Health and safety in welding and allied processes. Requirements testing and marking of equipment for air filtration. Testing of the separation efficiency for welding fume |
| BS EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials. General rules |
| BS EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Arc welding |
| BS EN ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Gas welding |
| BS EN ISO 15609-3:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Electron beam welding |
| BS EN ISO 15609-4:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Laser beam welding |
| BS EN ISO 15609-5:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Resistance welding |
| BS EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables |
| BS EN ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience |
| BS EN ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure |
| BS EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test |
| BS EN ISO 15614-10:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Hyperbaric dry welding |
| BS EN ISO 15614-11:2002 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Electron and laser beam welding |
| BS EN ISO 15614-12:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Spot, seam and projection welding |
| BS EN ISO 15614-13:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Resistance butt and flash welding |
| BS EN ISO 15614-1:2004+A1:2008 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| BS EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc welding of aluminium and its alloys |
| BS EN ISO 15614-4:2005 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Finishing welding of aluminium castings |
| BS EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc welding of titanium, zirconium and their alloys |
| BS EN ISO 15614-6:2006 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of copper and its alloys |
| BS EN ISO 15614-7:2007 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Overlay welding |
| BS EN ISO 15614-8:2002 | Specification and qualification of welding procedures for metallic materials. Welding procedure test. Welding of tubes to tube-plate joints |
| BS EN ISO 15618-1:2002 | Qualification testing of welders for under-water welding. Diver-welders for hyperbaric wet welding |
| BS EN ISO 15618-2:2002 | Qualification testing of welders for under-water welding. Diver-welders and welding operators for hyperbaric dry welding |
| BS EN ISO 15620:2000 | Welding. Friction welding of metallic materials |
| BS EN ISO 16432:2007 | Resistance welding. Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
| BS EN ISO 16433:2007 | Resistance welding. Procedure for seam welding of uncoated and coated low carbon steels |
| BS EN ISO 17652-1:2003 | Welding. Test for shop primers in relation to welding and allied processes. General requirements |
| BS EN ISO 17652-2:2003 | Welding. Test for shop primers in relation to welding and allied processes. Welding properties of shop primers |
| BS EN ISO 17652-3:2003 | Welding. Test for shop primers in relation to welding and allied processes. Thermal cutting |
| BS EN ISO 17652-4:2003 | Welding. Test for shop primers in relation to welding and allied processes. Emission of fumes and gases |
| BS EN ISO 17657-1:2007 | Resistance welding. Welding current measurement for resistance welding. Guidelines for measurement |
| BS EN ISO 17657-2:2007 | Resistance welding. Welding current measurement for resistance welding. Welding current meter with current sensing coil |
| BS EN ISO 17657-3:2007 | Resistance welding. Welding current measurement for resistance welding. Current sensing coil |
| BS EN ISO 17657-4:2007 | Resistance welding. Welding current measurement for resistance welding. Calibration system |
| BS EN ISO 17657-5:2007 | Resistance welding. Welding current measurement for resistance welding. Verification of welding current measuring system |
| BS EN ISO 17660-1:2006 | Welding. Welding of reinforcing steel. Load-bearing welded joints |
| BS EN ISO 17660-2:2006 | Welding. Welding of reinforcing steel. Non load-bearing welded joints |
| BS EN ISO 18278-1:2004 | Resistance welding. Weldability. Assessment of weldability for resistance spot, seam and projection welding of metallic materials |
| BS EN ISO 18594:2007 | Resistance spot-, projection- and seam-welding. Method for determining the transition resistance on aluminium and steel material |
| BS EN ISO 18595:2007 | Resistance welding. Spot welding of aluminium and aluminium alloys. Weldability, welding and testing |
| BS EN ISO 4063:2000 | Welding and allied processes. Nomenclature of processes and reference numbers |
| BS EN ISO 9013:1995 | Welding and allied processes. Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces |
| BS EN ISO 9013:2002 | Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances |
| BS EN ISO 9606-2:2004 | Qualification test of welders. Fusion welding. Aluminium and aluminium alloys |
| BS EN ISO 9606-3:1999 | Approval testing of welders. Fusion welding. Copper and copper alloys |
| BS EN ISO 9606-4:1999 | Approval testing of welders. Fusion welding. Nickel and nickel alloys |
| BS EN ISO 9606-5:2000 | Approval testing of welders. Fusion welding. Titanium and titanium alloys, zirconium and zirconium alloys |
| BS EN ISO 9692-2:1998 | Welding and allied processes. Joint preparation. Submerged arc welding of steels |
| BS EN ISO 9956-10:1997 | Specification and approval of welding procedures for metallic materials. Welding procedure specification for electron beam welding |
| BS EN ISO 9956-11:1997 | Specification and approval of welding procedures for metallic materials. Welding procedure specification for laser beam welding |
| DD CEN ISO/TS 15011-5:2006 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials |
| DD CEN ISO/TS 17845:2004 | Welding and allied processes. Designation system for imperfections |
| PD 6588:1996* CR 12187:1995 | Welding. Guidelines for a grouping system for welding purposes |
| PD CEN ISO/TR 17844:2004 | Welding. Comparison of standardised methods for the avoidance of cold cracks |
| PD CEN/TR 14599:2005 | Terms and definitions for welding purposes in relation with EN 1792 |
| PD CR 13576:1999* CR 13576:1999 | Implementation of EN 729 on quality requirements for fusion welding of metallic materials |
| PD CR ISO 15608:2000* CR ISO 15608:2000 | Welding. Guidelines for a metallic material grouping system |
