IHS Logo IHS - The Source for Critical Information and Insight BSi Logo
British Standards Online Heading
How to subscribe to British Standards Online
  Need a quote from IHS?
  The British Standards Online service is available via subscription from IHS. To speak to an expert about this service, please call:
+44 (0)1344 328300 or complete the
form below

Request an IHS quote for
British Standards Online
 
IHS Logo

BSi Logo
The following lists the key subject areas for this British Standards module.
Click the links to view the associated British Standards for each area.

Home >
Energy & heat transfer engineering ( Module 16 ) >

Internal combustion engines , Energy & heat transfer engineering ( Module 16 )
BS 3529:1962Specification for dimensions of flywheel housing mounting pads and brackets for i.c. engines
BS 5208:1975Specification for dimensions of power take-off driving shafts and mounting faces for small internal combustion engines
BS 5341-5:1976Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Ring grooves
BS 5341-6.1:1992* ISO 6621-1:1986Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. Vocabulary
BS 5341-6.2:1992* ISO 6621-2:1984Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. Inspection measuring principles
BS 5341-6.3:1992* ISO 6621-3:1983Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. Material specifications
BS 5341-6.4:1992* ISO 6621-4:1988Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabulary, inspection methods and generic specifications. General specifications
BS 5341-6.5:1992* ISO 6621-5:1988Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabularly, inspection methods and generic specifications. Quality requirements
BS 5341-7.1.1:1992* ISO 6622-1:1986Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Rectangular compression rings. Specification for rectangular rings
BS 5341-7.2:1992* ISO 6623:1986Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Specification for scraper rings
BS 5341-7.3.1:1992* ISO 6624-1:1986Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Keystone and half keystone compression rings. Specification for keystone rings
BS 5341-7.4:1992* ISO 6625:1986Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for single piece rings. Specification for oil control rings
BS 5341-8.1:1992* ISO 6626:1989Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Designs, dimensions and designations for multi-piece oil control rings. Specification for coil-spring-loaded oil control rings
BS 5514-1:1996* ISO 3046-1:1995Reciprocating internal combustion engines. Performance. Standard reference conditions, declarations of power, fuel and lubricating oil consumptions and test methods
BS 5514-3:1990* ISO 3046-3:1989Reciprocating internal combustion engines: performance. Specification for test measurements
BS 5514-4:1997* ISO 3046-4:1997Reciprocating internal combustion engines. Performance. Speed governing
BS 5514-5:1979* ISO 3046-V:1978Reciprocating internal combustion engines. Performance. Torsional vibrations
BS 5514-6:1992* ISO 3046-6:1990Reciprocating internal combustion engines. Performance. Specification for overspeed protection
BS 5514-7:1996* ISO 3046-7:1995Reciprocating internal combustion engines: performance. Codes for engine power
BS 5514:Part 1:1987* ISO 3046/1-1986Reciprocating internal combustion engines: performance. Specification for standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption
BS 5514:Part 2:1988* ISO 3046-2:1987Reciprocating internal combustion engines. Performance. Test methods
BS 5514:Part 4:1979* ISO 3046/IV-1978Reciprocating internal combustion engines. Performance. Speed governing
BS 5514:Part 7:1988* ISO 3046-7:1987Reciprocating internal combustion engines: performance. Specification for codes for engine power
BS 5672:1991* ISO 1204:1990Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines
BS 5676:1979* ISO 2710-1978Vocabulary for reciprocating internal combustion engines
BS 5676:Addendum No. 1:1983* ISO 2710-1978/Add. 1-1982Vocabulary for reciprocating internal combustion engines. Symbols
BS 6327:1982* ISO 6826:1982Specification for fire protection of reciprocating internal combustion engines
BS 6680:1985Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp
BS 6916:Part 11:1989Chain saws. Specification for general design, performance, safety and construction requirements for internal combustion engined machines
BS 7016-1:1988* ISO 7967-1:1987Components and systems of reciprocating internal combustion engines. Glossary of terms for structure and external covers
BS 7016-2:1988* ISO 7967-2:1987Components and systems of reciprocating internal combustion engines. Glossary of terms for main running gear
BS 7016-3:1988* ISO 7967-3:1987Components and systems of reciprocating internal combustion engines. Glossary of terms for valves, camshaft drive and actuating mechanisms
BS 7016-4:1988* ISO 7967-4:1988Components and systems of reciprocating internal combustion engines. Glossary of terms for pressure charging and air/exhaust gas ducting systems
BS 7016-5:1992* ISO 7967-5:1992Components and systems of reciprocating internal combustion engines. Glossary of terms for cooling systems
BS 7016-6:1992* ISO 7967-6:1992Components and systems of reciprocating internal combustion engines. Glossary of terms for lubricating systems
BS 7016-7:1999* ISO 7967-7:1998Components and systems of reciprocating internal combustion engines. Governing systems
BS 7016-8:1996* ISO 7967-8:1994Components and systems of reciprocating internal combustion engines. Glossary of terms for starting systems
BS 7016-9:1997* ISO 7967-9:1996Components and systems of reciprocating internal combustion engines. Control and monitoring systems
BS 7016:Part 8:1990* ISO 7967-8:1990Components and systems of reciprocating internal combustion engines. Glossary of terms for starting systems
BS 7403-12:2000* ISO 4548-12:2000Full-flow lubricating oil filters for internal combustion engines. Filtration efficiency using particle counting, and contaminant retention capacity
BS 7403-13:1991* ISO 6415:1990Full-flow lubricating oil filters for internal combustion engines. Specification for dimensions of spin-on filters
BS 7403-1:1998* ISO 4548-1:1997Full-flow lubricating oil filters for internal combustion engines. Methods of test for differential pressure/flow characteristics
BS 7403-2:1998* ISO 4548-2:1997Full-flow lubricating oil filters for internal combustion engines. Method of test for element by-pass valve characteristics
BS 7403-3:1998* ISO 4548-3:1997Full-flow lubricating oil filters for internal combustion engines. Methods of test for resistance to high differential pressure and to elevated temperature
BS 7403-4:1998* ISO 4548-4:1997Full-flow lubricating oil filters for internal combustion engines. Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
BS 7403-5:1991* ISO 4548-5:1990Full-flow lubricating oil filters for internal combustion engines. Method of test for cold start simulation and hydraulic pulse durability
BS 7403-6:1991* ISO 4548-6:1985Full-flow lubricating oil filters for internal combustion engines. Method of test for static burst pressure
BS 7403-7:1991* ISO 4548-7:1990Full-flow lubricating oil filters for internal combustion engines. Method of test for vibration fatigue
BS 7403-9:1995* ISO 4548-9:1995Full-flow lubricating oil filters for internal combustion engines. Method of test for inlet and outlet anti-drain valves
BS 7403:Part 8:1991* ISO 4548-8:1989Full-flow lubricating oil filters for internal combustion engines. Method of test for inlet anti-drain valves
BS 7525:1992Specification for flammability of air cleaner elements for internal combustion engines
BS 7698-10:1999* ISO 8528-10:1998Reciprocating internal combustion engine driven alternating current generating sets. Measurement of airborne noise by the enveloping surface method
BS 7698-12:1998* ISO 8528-12:1997Reciprocating internal combustion engine driven alternating current generating sets. Emergency power supply to safety devices
BS 7698-1:1993* ISO 8528-1:1993Reciprocating internal combustion engine driven alternating current generating sets. Specification for application, ratings and performance
BS 7698-2:1993* ISO 8528-2:1993Reciprocating internal combustion engine driven alternating current generating sets. Specification for engines
BS 7698-3:1993* ISO 8528-3:1993Reciprocating internal combustion engine driven alternating current generating sets. Specification for alternating current generators for generating sets
BS 7698-4:1993* ISO 8528-4:1993Reciprocating internal combustion engine driven alternating current generating sets. Specification for controlgear and switchgear
BS 7698-5:1993* ISO 8528-5:1993Reciprocating internal combustion engine driven alternating current generating sets. Specification for generating sets
BS 7698-6:1993* ISO 8528-6:1993Reciprocating internal combustion engine driven alternating current generating sets. Test methods
BS 7698-7:1996* ISO 8528-7:1994Reciprocating internal combustion engine driven alternating current generating sets. Technical declarations for specification and design
BS 7698-8:1996* ISO 8528-8:1995Reciprocating internal combustion engine driven alternating current generating sets. Requirements and tests for low-power generating sets
BS 7698-9:1996* ISO 8528-9:1995Reciprocating internal combustion engine driven alternating current generating sets. Measurement and evaluation of mechanical vibrations
BS 7712:1993* ISO 8999:1993Specification for graphical symbols for reciprocating internal combustion engines
BS EN 10090:1998Valve steels and alloys for internal combustion engines
BS EN 12601:2001Reciprocating internal combustion engine driven generating sets. Safety
BS EN 1679-1:1998Reciprocating internal combustion engines. Safety. Compression ignition engines
BS EN 1834-1:2000Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Group II engines for use in flammable gas and vapour atmospheres
BS EN 1834-2:2000Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
BS EN 1834-3:2000Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres. Group II engines for use in flammable dust atmospheres
BS EN 55012:2002Vehicles, boats and internal combustion engine driven devices. Radio disturbance characteristics. Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
BS EN 55012:2007Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers
BS EN ISO 11102-1:1997Reciprocating internal combustion engines. Handle starting equipment. Safety requirements and tests
BS EN ISO 11102-2:1997Reciprocating internal combustion engines. Handle starting equipment. Method of testing the angle of disengagement
BS EN ISO 11102-2:2009Reciprocating internal combustion engines. Handle starting equipment. Method of testing the angle of disengagement
BS EN ISO 14314:2004Reciprocating internal combustion engines. Recoil starting equipment. General safety requirements
BS EN ISO 14314:2009Reciprocal internal combustion engines. Recoil starting equipment. General safety requirements
BS EN ISO 8178-1:1996Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions
BS EN ISO 8178-2:1997Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions at site
BS EN ISO 8178-4:1996Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles for different engine applications
BS EN ISO 8178-5:1997Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS EN ISO 8178-6:2001Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and tests
BS ISO 10054:1998Internal combustion compression-ignition engines. Measurement apparatus for smoke from engines operating under steady-state conditions. Filter type smokemeter
BS ISO 10110-10:2004Optics and photonics. Preparation of drawings for optical elements and systems. Table representing data of optical elements and cemented assemblies
BS ISO 11424:1996Rubber hoses and tubing for air and vacuum systems for internal-combustion engines. Specification
BS ISO 13332:2000Reciprocating internal combustion engines. Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
BS ISO 14396:2002Reciprocating internal combustion engines. Determination and method for the measurement of engine power. Additional requirements for exhaust emission tests in accordance with ISO 8178
BS ISO 15550:2002Internal combustion engines. Determination and method for the measurement of engine power. General requirements
BS ISO 19013-1:2005Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification. Diesel fuels
BS ISO 19013-2:2005Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification. Gasoline fuels
BS ISO 21006:2006Internal combustion engines. Engine weight (mass) declaration
BS ISO 2261:1994Reciprocating internal combustion engines. Hand-operated control devices. Standard direction of motion
BS ISO 2710-1:2000Reciprocating internal combustion engines. Vocabulary. Terms for engine design and operation
BS ISO 2710-2:1999Reciprocating internal combustion engines. Vocabulary. Terms for engine maintenance
BS ISO 3046-1:2002Reciprocating internal combustion engines. Performance. Declarations of power, fuel and lubricating oil consumptions, and test methods. Additional requirements for engines for general use
BS ISO 3046-3:2006Reciprocating internal combustion engines. Performance. Test measurements
BS ISO 3046-5:2001Reciprocating internal combustion engines. Performance. Torsional vibrations
BS ISO 4548-9:2008Methods of test for full-flow lubricating oil filters for internal combustion engines. Inlet and outlet anti-drain valve tests
BS ISO 4639-2:1995Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification. Oxygenated fuels
BS ISO 4639-3:1995Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification. Oxidized fuels
BS ISO 6622-1:2003Internal combustion engines. Piston rings. Rectangular rings made of cast iron
BS ISO 6798:1995Reciprocating internal combustion engines. Measurement of emitted airborne noise. Engineering method and survey method
BS ISO 6826:1997Reciprocating internal combustion engines. Fire protection
BS ISO 7967-1:2005Reciprocating internal combustion engines. Vocabulary of components and systems. Structure and external covers
BS ISO 7967-4:2005Reciprocating internal combustion engines. Vocabulary of components and systems. Pressure charging and air/exhaust gas ducting systems
BS ISO 7967-5:2003Reciprocating internal combustion engines. Vocabulary of components and systems. Cooling systems
BS ISO 7967-6:2005Reciprocating internal combustion engines. Vocabulary of components and systems. Lubricating systems
BS ISO 7967-7:2005Reciprocating internal combustion engines. Vocabulary of components and systems. Governing systems
BS ISO 7967-8:2005Reciprocating internal combustion engines. Vocabulary of components and systems. Starting systems
BS ISO 8178-10:2002Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS ISO 8178-11:2006Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BS ISO 8178-1:2006Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 8178-2:2008Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-3:1994Reciprocating internal combustion engines. Exhaust emission measurement. Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 8178-4:2007Reciprocating internal combustion engines. Exhaust emission measurement. Steady-state test cycles for different engine applications
BS ISO 8178-5:2008Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-7:1996Reciprocating internal combustion engines. Exhaust emission measurement. Engine family determination
BS ISO 8178-8:1996Reciprocating internal combustion engines. Exhaust emission measurement. Engine group determination
BS ISO 8178-9:2000Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions
BS ISO 8528-1:2005Reciprocating internal combustion engine driven alternating current generating sets. Application, ratings and performance
BS ISO 8528-2:2005Reciprocating internal combustion engine driven alternating current generating sets. Engines
BS ISO 8528-3:2005Reciprocating internal combustion engine driven alternating current generating sets. Alternating current generators for generating sets
BS ISO 8528-4:2005Reciprocating internal combustion engine driven alternating current generating sets. Controlgear and switchgear
BS ISO 8528-5:2005Reciprocating internal combustion engine driven alternating current generating sets. Generating sets
BS ISO 8528-6:2005Reciprocating internal combustion engine driven alternating current generating sets. Test methods
BS ISO 8999:2001Reciprocating internal combustion engines. Graphical symbols
BS ISO/TR 14396:1996Reciprocating internal combustion engines. Determination and method for the measurement of engine power
DD ISO/TS 23556:2007Performance test method for diesel engine soot-removal devices in lubricating oils. Initial filtration efficiency
IHS experience – your advantage

IHS, formerly known as Technical Indexes, is one of the foremost providers of standards, regulatory, product and supplier information to industries worldwide including construction, health & safety, engineering, education, rail, energy, automotive, defence and many more. With over 45 years experience and more than 6000 customers based in the UK alone, IHS is the only company of its type providing access to several million pages of vital information.

The British Standard Service provided by IHS focuses on supplying you an established, authoritative, reliable and comprehensive information source.

How to subscribe to British Standards Online