| BS 1441:1969 | Specification for galvanized steel wire for armouring submarine cables |
| BS 1442:1969 | Specification for galvanized mild steel wire for armouring cables |
| BS 4553-1:1998 | Specification for 600/1000 V single-phase split concentric electric cables. Cables having PVC insulation |
| BS 4553-2:1998 | Specification for 600/1000 V single-phase split concentric electric cables. Cables having thermosetting insulation |
| BS 4553-3:1998 | Specification for 600/1000 V single-phase split concentric electric cables. Cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 4553:1992 | Specification for 600/1000 V PVC-insulated single-phase split concentric cables with copper conductors for electricity supply |
| BS 4727-2:Group 08:1994 | Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Electric cables |
| BS 5055:1991 | Specification for elastomer-insulated cables for electric signs and high-voltage luminous-discharge-tube installations |
| BS 5099:1992 | Specification for spark testing of electric cables |
| BS 5099:2004 | Electric cables. Voltage levels for spark testing |
| BS 5308-1:1986 | Instrumentation cables. Specification for polyethylene insulated cables |
| BS 5308-2:1986 | Instrumentation cables. Specification for PVC insulated cables |
| BS 5372:1989 | Specification for dimensions of cable terminations for 3-core and 4-core polymeric insulated cables of rated voltages 600/1000 V and 1900/3300 V having aluminium conductors |
| BS 5372:1997 | Specification for dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors |
| BS 5467:1989 | Specification for cables with thermosetting insulation for electricity supply for rated voltages of up to and including 600/1000 V and up to and including 1900/3300 V |
| BS 5467:1997+A3:2008 | Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V |
| BS 5593:1978 | Specification for impregnated paper-insulated cables with aluminium sheath/neutral conductor and three shaped solid aluminium phase conductors (CONSAC), 600/1000 V, for electricity supply |
| BS 6004:1991 | Specification for PVC-insulated cables (non-armoured) for electric power and lighting |
| BS 6004:1995 | Specification for PVC-insulated cables (non-armoured) for electric power and lighting |
| BS 6004:2000 | Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring |
| BS 6007:1993 | Specification for rubber-insulated cables for electric power and lighting |
| BS 6007:2000 | Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring |
| BS 6007:2006 | Electric cables. Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring |
| BS 6081:1989 | Specification for terminations for mineral-insulated cables |
| BS 6141:1991 | Specification for insulated cables and flexible cords for use in high temperature zones |
| BS 6195:1993 | Specification for insulated flexible cables and cords for coil leads |
| BS 6195:2006 | Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads |
| BS 6207-1:1995 | Mineral insulated cables with a rated voltage not exceeding 750 V. Cables |
| BS 6207-2:1995 | Mineral insulated cables with a rated voltage not exceeding 750 V. Terminations |
| BS 6207-3:2001 | Mineral insulated cables with a rated voltage not exceeding 750 V. Guide to use |
| BS 6207:1991 | Specification for mineral-insulated copper-sheathed cables with copper conductors |
| BS 6231:1990 | Specification for PVC-insulated cables for switchgear and controlgear wiring |
| BS 6231:1998 | Specification for PVC-insulated cables for switchgear and controlgear wiring |
| BS 6231:2006 | Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring |
| BS 6346:1989 | Specification for PVC-insulated cables for electricity supply |
| BS 6346:1997 | Electric cables. PVC insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V |
| BS 6351-1:1983 | Electric surface heating. Specification for electric surface heating devices |
| BS 6360:1991 | Specification for conductors in insulated cables and cords |
| BS 6387:1994 | Specification for performance requirements for cables required to maintain circuit integrity under fire conditions |
| BS 6425-1:1990 | Test on gases evolved during the combustion of materials from cables. Method for determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables |
| BS 6425-2:1993 | Test on gases evolved during the combustion of materials from cables. Determination of degree of acidity (corrosivity) of gases by measuring pH and conductivity |
| BS 6435:1984 | Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors |
| BS 6480:1988 | Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V |
| BS 6485:1990 | Specification for PVC-covered conductors for overhead power lines |
| BS 6485:1999 | PVC-covered conductors for overhead power lines |
| BS 6500:1994 | Specification for insulated flexible cords and cables |
| BS 6500:2000 | Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments |
| BS 6513:Part 6:1987 | Wideband cabled distribution systems. Specification for safety requirements |
| BS 6622:1991 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19 000/33 000 V |
| BS 6622:1999 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV |
| BS 6622:2007 | Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods |
| BS 6708:1991 | Specification for flexible cables for use at mines and quarries |
| BS 6708:1998 | Flexible cables for use at mines and quarries |
| BS 6724:1990 | Specification for armoured cables for electricity supply having thermosetting insulation with low emission of smoke and corrosive gases when affected by fire |
| BS 6724:1997+A3:2008 | Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V, having low emission of smoke and corrosive gases when affected by fire |
| BS 6726:1991 | Specification for festoon and temporary lighting cables and cords |
| BS 6726:1998 | Specification for festoon and temporary lighting cables and cords |
| BS 6746C:1993 | Colour chart for insulation and sheath of electric cables |
| BS 6883:1999 | Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods |
| BS 6977:1991 | Specification for insulated flexible cables for lifts and for other flexible connections |
| BS 7211:1994 | Specification for thermosetting insulated cables (non-armoured) for electric power and lighting with low emission of smoke and corrosive gases when affected by fire |
| BS 7211:1998 | Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire |
| BS 7450:1991* IEC 61059:1991 | Method for determination of economic optimization of power cable size |
| BS 7540-1:2005 | Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. General guidance |
| BS 7540-2:2005 | Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22 |
| BS 7540-3:2005 | Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22 |
| BS 7540:1992 | Guide to use of cables with a rated voltage not exceeding 450/750 V |
| BS 7540:1994 | Guide to use of cables with a rated voltage not exceeding 450/750 V |
| BS 7622-1:1993 | Measurement of smoke density of electric cables burning under defined conditions. Test apparatus |
| BS 7622-2:1993 | Measurement of smoke density of electric cables burning under defined conditions. Test procedure and requirements |
| BS 7629-1:1997 | Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multicore cables |
| BS 7629-2:1997 | Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multipair cables |
| BS 7629:1993 | Specification for thermosetting insulated cables with limited circuit integrity when affected by fire |
| BS 7630:1993 | Generic specification for symmetric pair/quad and multicore cables for digital communication |
| BS 7769-1.1:1997* IEC 60287-1-1:1994 | Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. General |
| BS 7769-1.2:1994* IEC 60287-1-2:1993 | Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. Sheath eddy current loss factors for two circuits in flat formation |
| BS 7769-2.2:1997* IEC 60287-2-2:1995 | Electric cables. Calculation of the current rating. Thermal resistance. A method for calculating reduction factors for groups of cables in free air, protected from solar radiation |
| BS 7769-3.1:1997* IEC 60287-3-1:1995 | Electric cables. Calculation of the current rating. Sections on operating conditions. Reference operating conditions and selection of cable type |
| BS 7835:1996 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19 000/33 000 V having low emission of smoke and corrosive gases when affected by fire |
| BS 7835:2000 | Specification for armoured cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3.8/6.6 kV up to 19/33 kV having low emission of smoke and corrosive gases when affected by fire |
| BS 7835:2007 | Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods |
| BS 7846:1996 | Specification for 600/1000 V armoured fire-resistant electric cables having low emission of smoke and corrosive gases when affected by fire |
| BS 7846:2000 | Electric cables. 600/1000 V armoured fire-resistant cables having thermosetting insulation and low emission of smoke and corrosive gases when affected by fire |
| BS 7870-1:1996 | LV and MV polymeric insulated cables for use by distribution and generation utilities. General |
| BS 7870-2:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Methods of test |
| BS 7870-3.10:2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. PVC insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-3.11:2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-3.12:2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire |
| BS 7870-3.1:1996 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. PVC and XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors |
| BS 7870-3.20:2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. PVC insulated split concentric cables with copper or aluminium conductors |
| BS 7870-3.21:2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors |
| BS 7870-3.2:1996 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. PVC insulated split concentric cables with copper conductors |
| BS 7870-3.3:1996 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. Specification for XLPE insulated combined neutral and earth cables with solid aluminium conductors |
| BS 7870-3.40:2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors |
| BS 7870-3.4:1996 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE and HEPR insulated combined neutral and earth aluminium or copper wire concentric cables with solid aluminium conductors |
| BS 7870-3.50:2005 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire. (Implementation of HD 603) |
| BS 7870-4.10:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV. Single-core 11 kV and 33 kV cables. Single core 11 kV and 33 kV cables |
| BS 7870-4.11:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV. Single-core 33 kV lead sheathed cables. Single core 33 kV lead sheathed cables |
| BS 7870-4.12:2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV. Single core 11 kV copper foil sheath cables. Section 4.12: single core 11 kV copper foil sheath cables |
| BS 7870-4.13:2001 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV. Single core 33 kV copper wire/foil sheath cables. Section 4.13: Single core 33 kV copper wire/foil sheath cables |
| BS 7870-4.20:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables with extruded insulation for rated voltages of 11 kV and 33 kV. Three-core 11 kV cables. Three core 11 kV cables |
| BS 7870-5:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution |
| BS 7870-6.1:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. PVC insulated and PVC sheathed cables |
| BS 7870-6.2:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. XLPE or HEPR insulated and PVC sheathed cables |
| BS 7870-6.3:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. Cables with thermosetting insulation and non-halogenated sheath |
| BS 7870-7.1:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring |
| BS 7870-7.2:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring |
| BS 7870-8.1:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multicore cable with copper conductors. Section 8.1 Single wire armoured and PVC sheathed multicore cable with copper conductors |
| BS 7870-8.2:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multipair cable with copper conductors. Section 8.2 Single wire armoured and PVC sheathed multipair cable with copper conductors |
| BS 7870-8.3:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance. Section 8. 3 Single wire armoured and PVC sheathed multicore cable with copper conductors, having reduced fire propagation performance |
| BS 7870-8.4:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance. Section 8.4 Single wire or double steel tape armoured and PVC sheathed multipair cable with copper conductors, having reduced fire propagation performance |
| BS 7870-8.5:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath. Section 8.5 Single wire armoured and unarmoured multicore cables with copper conductors and non-halogenated sheath |
| BS 7870-8.6:2003 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground. Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors. Section 8.6 Single wire or double steel tape armoured and non-halogenated sheathed multipair cable with copper conductors |
| BS 7870:Part 2:1996 | LV and MV polymeric insulated cables for use by distribution and generation utilities. Methods of test |
| BS 7888-1:1998 | LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). General |
| BS 7888-2:1998 | LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Methods of test |
| BS 7888-4.1:1998 | Test requirements for MV accessories. Accessories for cables with extruded insulation. Section: 4-1: Accessories for cables with extruded insulation |
| BS 7888-4.1:2006* HD 629.1 S2:2006 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV. Cables with extruded insulation |
| BS 7888-4.2:1998 | LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Test requirements for MV accessories. Accessories for cables with impregnated paper insulation |
| BS 7888-4.2:2006* HD 629.2 S2:2006 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV. Cables with impregnated paper insulation |
| BS 7889:1997 | Electric cables. Thermosetting insulated, unarmoured cables for a voltage of 600/1000 V |
| BS 7894:2003 | MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV |
| BS 7912:2001 | Power cables with XLPE insulation and metallic sheath, and their accessories, for rated voltages from 66 kV (Um=72.5 kV) to 132kV (Um=145kV). Requirements and test methods |
| BS 7917:1999 | Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods |
| BS 7919:2001 | Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments |
| BS 7922:2004 | Electric cables. Fluid-filled, paper- and PPL-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV (Um = 420 kV). Requirements and test methods |
| BS 7923:2004 | Electric cables. Internal gas-pressure cables and accessories for alternating voltages up to and including 275 kV (Um = 300 kV). Requirements and test methods |
| BS 7933-1:2007* HD 631.1 S2:2007 | Electric cables. Accessories. Material characterisation. Fingerprinting and type tests for resinous compounds |
| BS 7933-2:2007* HD 631.2:2007 | Electric cables. Accessories. Material characterisation. Fingerprinting and type tests for heat shrinkable components for low voltage applications |
| BS 7970:2005 | Electric cables. Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (Um = 72.5 kV) to 132kV (Um = 145 kV) |
| BS 801:1984 | Specification for composition of lead and lead alloy sheaths of electric cables |
| BS 8434-1:2003 | Methods of test for assessment of the fire integrity of electric cables. Test for unprotected small cables for use in emergency circuits. BS EN 50200 with addition of water spray |
| BS 8434-2:2003 | Methods of test for assessment of the fire integrity of electric cables. Test for unprotected small cables for use in emergency circuits. BS EN 50200 with 930 deg flame and with water spray |
| BS 8436:2004 | Electric cables. 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables |
| BS 8491:2008 | Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems |
| BS 8512:2008 | Electric cables. Code of practice for the storage, handling, installation and disposal of cables on wooden drums |
| BS 9550:1989 | Specification for capability approval procedures for d.c. and low frequency connector cable assemblies and wiring harnesses: generic data |
| BS EN 10257-1:1998 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Land cables |
| BS EN 10257-2:1998 | Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables. Submarine cables |
| BS EN 45510-2-8:2004 | Guide for procurement of power station equipment. Electrical equipment. Power cables |
| BS EN 50143:1999 | Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV |
| BS EN 50167:1996 | Sectional specification for horizontal floor wiring cables with a common overall screen for use in digital communication |
| BS EN 50168:1996 | Sectional specification for work area wiring cables with a common overall screen for use in digital communication |
| BS EN 50169:1996 | Sectional specification for backbone cables, riser and campus, with a common overall screen for use in digital communication |
| BS EN 50200:2000 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| BS EN 50200:2006 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| BS EN 50214:1998 | Flexible cables for lifts |
| BS EN 50214:2006 | Flat polyvinyl chloride sheathed flexible cables |
| BS EN 50264-1:2002 | Railway applications. Railway rolling stock cables having special fire performance. Standard wall. General requirements |
| BS EN 50264-2:2002 | Railway applications. Railway rolling stock cables having special fire performance. Standard wall. Single core cables |
| BS EN 50264-3:2002 | Railway applications. Railway rolling stock cables having special fire performance. Standard wall. Multicore cables |
| BS EN 50265-1:1999 | Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Apparatus |
| BS EN 50265-2-1:1999 | Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures. 1 kW pre-mixed flame. 1 kW pre-mixed flame |
| BS EN 50265-2-2:1999 | Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures. Diffusion flame. Diffusion flame |
| BS EN 50266-1:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Apparatus |
| BS EN 50266-2-1:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category A F/R |
| BS EN 50266-2-2:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category A |
| BS EN 50266-2-3:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category B |
| BS EN 50266-2-4:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Category C |
| BS EN 50266-2-5:2001 | Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables. Procedures. Small cables. Category D |
| BS EN 50267-1:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Apparatus |
| BS EN 50267-2-1:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of the amount of halogen acid gas. Determination of the amount of halogen acid gas |
| BS EN 50267-2-2:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of degree of acidity of gases for materials by measuring pH and conductivity. Determination of degree of acidity of gases for materials by measuring pH and conductivity |
| BS EN 50267-2-3:1999 | Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures. Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity. Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity |
| BS EN 50268-1:2000 | Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Apparatus |
| BS EN 50268-2:2000 | Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions. Procedure |
| BS EN 50288-2-1:2001 | Multi-element metallic cables used in analogue and digital communication and control. Sectional specification for screened cables characterized up to 100 MHz. Horizontal and building backbone cables |
| BS EN 50289-3-11:2001 | Communication cables. Specifications for test methods. Mechanical test methods. Cable cut-through resistance |
| BS EN 50289-3-12:2001 | Communication cables. Specifications for test methods. Mechanical test methods. Shot gun damage |
| BS EN 50289-3-16:2001 | Communication cables. Specifications for test methods. Mechanical test methods. Cable tensile performance |
| BS EN 50289-3-1:2001 | Communication cables. Specifications for test methods. Mechanical test methods. General requirements. General requirements |
| BS EN 50289-3-4:2001 | Communication cables. Specifications for test methods. Mechanical test methods. Tensile strength, elongation and shrinkage of insulation and sheath |
| BS EN 50289-3-5:2001 | Communication cables. Specifications for test methods. Mechanical test methods. Crush resistance of the cable |
| BS EN 50289-3-6:2001 | Communication cables. Specifications for test methods. Mechanical test methods. Impact resistance of the cable |
| BS EN 50289-3-7:2001 | Communication cables. Specifications for test methods. Mechanical test methods. Abrasion resistance of the cable sheath |
| BS EN 50289-3-8:2001 | Communication cables. Specifications for test methods. Mechanical test methods. Abrasion resistance of cable sheath markings |
| BS EN 50289-3-9:2001 | Communication cables. Specifications for test methods. Mechanical test methods. Bending tests |
| BS EN 50289-4-1:2001 | Communication cables. Specifications for test methods. Environmental test methods. General requirements |
| BS EN 50289-4-2:2001 | Communication cables. Specifications for test methods. Environmental test methods. Water penetration |
| BS EN 50289-4-9:2001 | Communication cables. Specifications for test methods. Environmental test methods. Pneumatic resistance |
| BS EN 50290-1-1:2001 | Communication cables. General |
| BS EN 50290-2-21:2002 | Communication cables. Common design rules and construction. PVC insulation compounds |
| BS EN 50290-2-22:2002 | Communication cables. Common design rules and construction. PVC sheathing compounds |
| BS EN 50290-4-1:2002 | Communication cables. General considerations for the use of cables. Environmental conditions and safety aspects |
| BS EN 50305:2002 | Railway applications. Railway rolling stock cables having special fire performance. Test methods |
| BS EN 50306-1:2002 | Railway applications. Railway rolling stock cables having special fire performance. Thin wall. General requirements |
| BS EN 50306-2:2002 | Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core cables |
| BS EN 50306-3:2002 | Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Single core and multicore cables (pairs, triples and quads) screened and thin wall sheathed |
| BS EN 50306-4:2002 | Railway applications. Railway rolling stock cables having special fire performance. Thin wall. Multicore and multipair cables standard wall sheathed |
| BS EN 50334:2001 | Marking by inscription for the identification of cores of electric cables |
| BS EN 50355:2003 | Railway applications. Railway rolling stock cables having special fire performance. Thin wall and standard wall. Guide to use |
| BS EN 50356:2002 | Method for spark testing of cables |
| BS EN 50362:2003 | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
| BS EN 50382-1:2008 | Railway applications. Railway rolling stock high temperature power cables having special fire performance. General requirements |
| BS EN 50382-2:2008 | Railway applications. Railway rolling stock high temperature power cables having special fire performance. Single core silicone rubber insulated cables for 120°C or 150°C |
| BS EN 50395:2005 | Electrical test methods for low voltage energy cables |
| BS EN 50396:2005 | Non electrical test methods for low voltage electric cables |
| BS EN 60228:2005 | Conductors of insulated cables |
| BS EN 60230:2002 | Impulse tests on cables and their accessories |
| BS EN 60332-1-1:2004 | Tests on electrical and optical cables under fire conditions. Test for a vertical flame propagation for a single insulated wire or cable. Apparatus |
| BS EN 60332-1-2:2004 | Tests on electric and optical fibre cables under fire conditions. Test for vertfical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame |
| BS EN 60332-1-3:2004 | Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single vertical insulated wire or cable. Procedure for determination of flaming droplets/particles |
| BS EN 60332-2-1:2004 | Tests on electric and optical fibre cables under fire conditions. Test for vertical flame propagation for a single small insulated wire or cable. Apparatus |
| BS EN 60332-2-2:2004 | Tests on electric and optical fibre cables under fire conditions. Tests for vertical flame propagation for a single small insulated wire or cable. Procedure for diffusion flame |
| BS EN 60702-1:2002* IEC 60702-1:2002 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Cables |
| BS EN 60702-2:2002* IEC 60702-2:2002 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V. Terminations |
| BS EN 60708:2005 | Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath |
| BS EN 60719:1993* IEC 60719:1992 | Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| BS EN 60799:1995 | Cord sets |
| BS EN 60799:1998* IEC 60799:1998 | Electrical accessories. Cord sets and interconnection cord sets |
| BS EN 60811-4-1:2004 | Insulating and sheathing materials of electric and optical cables. Common test methods. Methods specific to polypropylene and polypropylene compounds. Resistance to environmental stress cracking. Measurement of the melt flow index. Carbon black and/or mineral filter content measurement in PE by direct combustion. Measurement of carbon black content by TGA. Assessment of carbon black dispersion in polyethylene using a microscope |
| BS EN 60811-4-2:2004 | Insulating and sheathing materials of electric and optical cables. Common test methods. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature. Wrapping test after conditioning at elevated temperature. Wrapping test after thermal ageing in air. Measurement of mass increase. Long-term stability test. Test method for copper-catalyzed oxidative degradation |
| BS EN 60885-2:2003 | Electrical test methods for electric cables. Partial discharge tests |
| BS EN 60885-3:2003 | Electrical test methods for electric cables. Test methods for partial discharge measurements on lengths of extruded power cables |
| BS EN 61034-1:2005 | Measurement of smoke density of cables burning under defined conditions. Test apparatus |
| BS EN 61034-2:2005 | Measurement of smoke density of cables burning under defined conditions. Test procedure and requirements |
| BS EN 61138:1998 | Cables for portable earthing and short-circuiting equipment |
| BS EN 61138:2007 | Cables for portable earthing and short-circuiting equipment |
| BS EN 61442:2005 | Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV) |
| BS EN 62219:2002 | Overhead electrical conductors. Formed wire, concentric lay, stranded conductors |
| BS EN 62230:2007 | Electric cables. Spark-test method |
| BS IEC 60287-1-1:2006 | Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. General |
| BS IEC 60287-1-3:2002 | Electric cables. Calculation of the current rating. Current rating equations (100 % load factor) and calculation of losses. Current sharing between parallel single-core cables and calculation of circulating current losses |
| BS IEC 60287-2-1:1994+A2:2006 | Electric cables. Calculation of the current rating. Thermal resistance. Calculation of thermal resistance |
| BS IEC 60287-3-3:2007 | Electric cables. Calculation of the current rating. Sections on operating conditions. Cables crossing external heat sources |
| BS IEC 60853-3:2002 | Calculation of the cyclic and emergency current rating of cables. Cyclic rating factor for cables of all voltages, with partial drying of the soil |
| BS IEC 61000-5-2:1997 | Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Earthing and cabling |
| DD IEC/PAS 62338:2002 | Screened balanced cables. Coupling attenuation measurement, triaxial method |
| PD 2379:1994 | Register of colours of manufacturers' identification threads for electric cables and cords |
| PD 2379:2005 | Register of colours of manufacturers' identification threads for electric cables and cords. Tenth Edition |
| PD CLC/TR 50424:2004 | Electric cables. List of residual recognised national types |
| PD CLC/TR 62125:2008 | Environmental statement specific to TC 20. Electric cables |
