| BS 2067:1953 | Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method) |
| BS 2844:1995* IEC 60212:1971 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
| BS 2848:1973 | Specification for flexible insulating sleeving for electrical purposes |
| BS 2918-2:1994* IEC 60243-2:1990 | Methods of test for electric strength of solid insulating materials. Additional requirements for tests using direct voltage |
| BS 2918:Part 1:1994 | Methods of test for electric strength of solid insulating materials. Tests at power frequencies |
| BS 3858:1992 | Specification for binding and identification sleeves for use on electric cables and wires |
| BS 4542:1970 | Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method) |
| BS 4727-1:Group 10:1991* IEC 60050-212:1990 | Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Insulating solids, liquids and gases |
| BS 5591:1978* IEC 60589:1977 | Methods of test for determination of ionic impurities in electrical insulating materials by extraction with liquids |
| BS 5604:1986* IEC 60587:1984 | Methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions |
| BS 5691-1:1995* IEC 60216-1:1990 | Guide for the determination of thermal endurance properties of electrical insulating materials. General guidelines for ageing procedures and evaluation of test results |
| BS 5691-2:1995* IEC 60216-2:1990 | Guide for the determination of thermal endurance properties of electrical insulating materials. Choice of test criteria |
| BS 5691-3.1:1995* IEC 60216-3-1:1990 | Guide for the determination of thermal endurance properties of electrical insulating materials. Instructions for calculating thermal endurance characteristics. Calculations using mean values of normally distributed complete data |
| BS 5691-4.1:1995* IEC 60216-4-1:1990 | Guide for the determination of thermal endurance properties of electrical insulating materials. Ageing ovens. Single chamber ovens |
| BS 5691-5:1995* IEC 60216-5:1990 | Guide for the determination of thermal endurance properties of electrical insulating materials. Guidelines for the application of thermal endurance characteristics |
| BS 5735:1979* IEC 60426:1973 | Test methods for determining electrolytic corrosion with electrical insulating materials |
| BS 5823:1979* IEC 60345:1971 | Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures |
| BS 5901:1980* IEC 60112:1979 | Method of test for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions |
| BS 6233:1982* IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| BS 6334:1983* IEC 60707:1981 | Methods of test for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source |
| BS 6469-5.1:1992* IEC 60811-5-1:1990 | Insulating and sheathing materials of electric cables. Methods of test specific to filling compounds. Drop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at 23°C. D.C. resistivity at 23°C and 100°C |
| BS 6469-99-1:1992 | Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811. Non-electrical tests |
| BS 6469-99.2:1992 | Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN 60811. Electrical tests |
| BS 6469:Part 1:Section 1.1:1992 | Insulating and sheathing materials of electric cables. Methods of test for general application. Measurement of thickness and overall dimensions. Tests for determining the mechanical properties |
| BS 6893:Part 2:1987* IEC 60684-2:1984 | Flexible insulating sleeving for electrical purposes. Methods of test |
| BS 6921:1988* IEC 60795:1984 | Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method |
| BS 7447:1991 | Method of test for determination of the ignitability of solid electrical insulating materials when exposed to electrically heated wire sources |
| BS 7663:1993 | Methods of test for determination of permittivity and dissipation factor of electrical insulating material in sheet or tubular form |
| BS 7737-1:1995* IEC 60377-1:1973 | Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. General |
| BS 7737-2:1995* IEC 60377-2:1977 | Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Resonance methods |
| BS 7808:1995* IEC 61251:1993 | Electrical insulating materials. A.C. voltage endurance evaluation. Introduction |
| BS 7811-2:1995* IEC 60544-2:1991 | Guide for determining the effects of ionizing radiation on insulating materials. Procedures for irradiation and test |
| BS 7811-4:1995* IEC 60544-4:1985 | Guide for determining the effects of ionizing radiation on insulating materials. Classification system for service in radiation environments |
| BS 7815:1995* IEC 61087:1991 | Guide for evaluating the discharges from a charged surface |
| BS 7819:1995* IEC 61026:1991 | Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials |
| BS 7826-1:1995* IEC 60493-1:1974 | Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results |
| BS EN 50363-0:2005 | Insulating, sheathing and covering materials for low voltage energy cables. General introduction |
| BS EN 60085:2004 | Electrical insulation. Thermal classification |
| BS EN 60112:2003 | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| BS EN 60216-1:2002* IEC 60216-1:2001 | Guide for the determination of thermal endurance properties of electrical insulating materials. Ageing procedures and evaluation of test results |
| BS EN 60216-2:2005 | Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance properties of electrical insulating materials. Choice of test criteria |
| BS EN 60216-3-2:1995* IEC 60216-3-2:1993 | Guide for the determination of thermal endurance properties of electrical insulating materials. Instructions for calculating thermal endurance characteristics. Calculations for incomplete data: proof test results up to and including the median time to end-point (equal test groups) |
| BS EN 60216-3:2002 | Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics |
| BS EN 60216-3:2006 | Electrical insulating materials. Thermal endurance properties. Instructions for calculating thermal endurance characteristics |
| BS EN 60216-4-1:2006 | Electrical insulating materials. Thermal endurance properties. Ageing ovens. Single-chamber ovens |
| BS EN 60216-4-2:2001* IEC 60216-4-2:2000 | Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Precision ovens for use up to 300°C |
| BS EN 60216-4-3:2000* IEC 60216-4-3:2000 | Guide for the determination of thermal endurance properties of electrical insulating materials. Electrical insulating materials. Thermal endurance properties. Ageing ovens. Multi-chamber ovens. Multi-chamber ovens |
| BS EN 60216-5:2003 | Electrical insulating materials. Thermal endurance properties. Determination of relative thermal endurance index (RTE) of an insulating material |
| BS EN 60216-6:2004 | Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| BS EN 60216-6:2006 | Electrical insulating materials. Thermal endurance properties. Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| BS EN 60243-1:1998* IEC 60243-1:1998 | Methods of test for electric strength of solid insulating materials. Tests at power frequencies |
| BS EN 60243-2:2001* IEC 60243-2:2001 | Methods of test for electric strength of solid insulating materials. Additional requirements for tests using direct voltage |
| BS EN 60243-3:1994* IEC 60243-3:1993 | Methods of test for electric strength of solid insulating materials. Additional requirements for impulse tests |
| BS EN 60243-3:2002* IEC 60243-3:2001 | Methods of test for electric strength of solid insulating materials. Additional requirements for 1,2/50 mus impulse tests |
| BS EN 60343:1993* IEC 60343:1991 | Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges |
| BS EN 60426:2007 | Electrical insulating materials. Determination of electrolytic corrosion caused by insuating materials. Test methods |
| BS EN 60450:2004 | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
| BS EN 60455-3-1:2003 | Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Unfilled epoxy resinous compounds. Sheet 1: Unfilled epoxy resinous compounds |
| BS EN 60455-3-2:2003 | Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Quartz filled epoxy resinous compounds. Sheet 2: Quartz filled epoxy resinous compounds |
| BS EN 60455-3-3:2003 | Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Unfilled polyurethane compounds. Sheet 3: Unfilled polyurethane compouds |
| BS EN 60455-3-5:2002* IEC 60455-3-5:2001 | Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Unsaturated polyester based impregnating resins. Sheet 5: Unsaturated polyester based impregnating resins |
| BS EN 60455-3-5:2006 | Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Unsaturated polyester based impregnating resins |
| BS EN 60464-3-1:2002* IEC 60464-3-1:2001 | Varnishes used for electrical insulation. Specifications for individual materials. Sheet 1: Ambient curing finishing varnishes |
| BS EN 60544-1:1995* IEC 60544-1:1994 | Electrical insulating materials. Determination of the effects of ionizing radiation. Radiation interaction and dosimetry |
| BS EN 60544-4:2003 | Electrical insulating materials. Determination of the effects of ionizing radiation. Classification system for service in radiation environments |
| BS EN 60544-5:2003 | Electrical insulating materials. Determination of the effects of ionizing radiation. Procedures for assessment of ageing in service |
| BS EN 60587:2007 | Electrical insulating materials used under severe ambient conditions. Test methods for evaluating resistance to tracking and erosion |
| BS EN 60626-1:1996* IEC 60626-1:1995 | Combined flexible materials for electrical insulation. Definitions and general requirements |
| BS EN 60626-2:1996* IEC 60626-2:1995 | Combined flexible materials for electrical insulation. Methods of test |
| BS EN 60626-3:1997* IEC 60626-3:1996 | Combined flexible materials for electrical insulation. Specifications for individual materials |
| BS EN 60684-2:1997* IEC 60684-2:1997 | Flexible insulating sleeving. Methods of test |
| BS EN 60695-2-1/2:1996* IEC 60695-2-1/2:1994 | Fire hazard testing. Test methods. Glow-wire flammability test on materials |
| BS EN 60695-2-1/3:1996* IEC 60695-2-1/3:1994 | Fire hazard testing. Test methods. Glow-wire ignitability test on materials |
| BS EN 60707:1999* IEC 60707:1999 | Flammability of solid non-metallic materials when exposed to flame sources. List of test methods |
| BS EN 60811-1-1:1995 | Insulating and sheathing materials of electric cables. Common test methods. General application. Measurement of thickness and overall dimensions. Tests for determining the mechanical properties. Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
| BS EN 60811-1-2:1995* IEC 60811-1-2:1985 | Insulating and sheathing materials of electric cables. Common test methods. General application. Thermal ageing methods |
| BS EN 60811-1-3:1995 | Insulating and sheathing materials of electric cables. Common test methods. General application. Methods for determining the density. Water absorption tests. Shrinkage test. Section 3: Methods for determining the density - Water absorption tests - Shrinking test |
| BS EN 60811-1-4:1995* IEC 60811-1-4:1985 | Insulating and sheathing materials of electric cables. Common test methods. General application. Tests at low temperature |
| BS EN 60811-5-1:2000* IEC 60811-5-1:1990 | Insulating and sheathing materials of electric and optical fibre cables. Common test methods. Methods specific to filling compounds. Drop point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at 23°C. D.C. resistivity at 23°C and 100°C |
| BS EN 60893-1:2004 | Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Definitions, designations and general requirements |
| BS EN 60893-3-7:2004 | Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Specifications for individual materials. Requirements for rigid laminated sheets based on polymide resins |
| BS EN 61006:2004 | Electrical insulating materials. Methods of test for the determination of the glass transition temperature |
| BS EN 61033:2006 | Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
| BS EN 61074:1993* IEC 61074:1991 | Method of test for determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry |
| BS EN 61181:1993* IEC 61181:1993 | Impregnated insulating materials. Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
| BS EN 61212-1:2006 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Definitions, designations and general requirements |
| BS EN 61212-3-1:2006 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated rolled tubes |
| BS EN 61212-3-2:2006 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated moulded tubes |
| BS EN 61212-3-3:2006 | Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Round laminated moulded rods |
| BS EN 61302:1996* IEC 61302:1995 | Electrical insulating materials. Method to evaluate the resistance to tracking and erosion. Rotating wheel dip test |
| BS EN 61621:1997* IEC 61621:1997 | Dry, solid insulating materials. Resistance test to high-voltage, low-current arc discharges |
| BS IEC 60695-2-20:1995 | Fire hazard testing. Glowing/Hot wire based test methods. Hot-wire coil ignitability test on materials |
| BS IEC 61111:1992 | Matting of insulating material for electrical purposes |
| BS IEC 61112:1992 | Blankets of insulating material for electrical purposes |
| DD ENV 61072:1995* IEC 61072:1991 | Methods of test for evaluating the resistance of insulating materials against the initiation of electrical trees |
| DD ENV 61111:2002 | Matting of insulating material for electrical purposes |
| DD ENV 61112:2002 | Blankets of insulating material for electrical purposes |
| DD IEC/TS 61934:2006 | Electrical insulating materials and systems. Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses |
| PD IEC TR 60893-4:2003 | Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Typical values |
| PD IEC/TR 62062:2002 | Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112 |
