| BS 3214:1974 | Specification for locking connectors for battery operated vehicles (320 ampere rating) |
| BS 3283-1:1980 | Non-reversible connectors and appliance inlets for portable electrical appliances (for circuits up to 250 V). Specification for 13 A connector and appliance inlet |
| BS 3288-1:1997 | Insulator and conductor fittings for overhead power lines. Performance and general requirements |
| BS 3288-2:1990 | Insulator and conductor fittings for overhead power lines. Specification for a range of fittings |
| BS 3288:Part 1:1973 | Insulator and conductor fittings for overhead power lines. Performance and general requirements |
| BS 3939:Part 3:1985* IEC 60617-3:1983 | Graphical symbols for electrical power, telecommunications and electronics diagrams. Conductors and connecting devices |
| BS 442:1950 | Specification for terminals for electrical apparatus for railway signalling purposes |
| BS 4579-1:1970 | Specification for performance of mechanical and compression joints in electric cable and wire connectors. Compression joints in copper conductors |
| BS 4579-2:1973 | Specification for performance of mechanical and compression joints in electric cable and wire connectors. Compression joints in nickel, iron and plated copper conductors |
| BS 4579-3:1976 | Specification for performance of mechanical and compression joints in electric cable and wire connectors. Mechanical and compression joints in aluminium conductors |
| BS 5630:1978 | Specification for interface dimensions of snap-on connections for use with electrically controlled hydraulic equipment |
| BS 6220:1983 | Specification for junction boxes for use in electrical installations with rated voltages not exceeding 250 V |
| BS 6516-2:1990* IEC 60352-2:1990 | Solderless connections. Specification for solderless crimped connections (including test methods and practical guidance) |
| BS 6910-1:1988 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials |
| BS 6910-2:1989 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation |
| BS 7197:1990 | Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV |
| BS 7215:1990 | Specification for separable insulated cable connector systems above 1 kV and up to 36 kV |
| BS 7609:1992 | Code of practice for installation and inspection of uninsulated compression and mechanical connectors for power cables with copper or aluminium conductors |
| BS 7727:1994 | Code of practice for installation and inspection of pre-insulated compression terminals and connectors for cables with copper conductors up to 6 mm² |
| BS 7888-1:1998 | LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). General |
| BS 7888-2:1998 | LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Methods of test |
| BS 7888-3:1998 | LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Test requirements for LV accessories |
| BS 7888-4.1:1998 | Test requirements for MV accessories. Accessories for cables with extruded insulation. Section: 4-1: Accessories for cables with extruded insulation |
| BS 7888-4.1:2006* HD 629.1 S2:2006 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2)kV up to 20,8/36(42)kV. Cables with extruded insulation |
| BS 7888-4.2:1998 | LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Test requirements for MV accessories. Accessories for cables with impregnated paper insulation |
| BS 7888-4.2:2006* HD 629.2 S2:2006 | Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42)kV. Cables with impregnated paper insulation |
| BS 91:1973 | Specification for electric cable soldering sockets |
| BS 91:1998 | Electric cable soldering sockets. Specification |
| BS 951:1986 | Specification for clamps for earthing and bonding purposes |
| BS 951:1999 | Electrical earthing. Clamps for earthing and bonding. Specification |
| BS 9530:1988 | Specification for cable fitting accessories of assessed quality for circular electrical connectors: generic data, methods of test and rules for the preparation of detail specifications |
| BS 9550:1989 | Specification for capability approval procedures for d.c. and low frequency connector cable assemblies and wiring harnesses: generic data |
| BS CECC 299001:1999* CECC 2990001:1999 | Technology approval schedule. Manufacture of electrical connectors |
| BS EN 3645-008:2007 | Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous. Non release plug with grounding ring. Product standard |
| BS EN 50146:2000 | Cable ties for electrical installations |
| BS EN 50250:2002 | Conversion adaptors for industrial use |
| BS EN 50393:2006 | Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV |
| BS EN 60320-2-4:2006 | Appliance couplers for household and similar general purposes. Couplers dependent on appliance weight for engagement |
| BS EN 60352-1:1997 | Solderless connections. General requirements, test methods and practical guidance |
| BS EN 60352-1:1998* IEC 60352-1:1997 | Solderless connections. Wrapped connections. General requirements, test methods and practical guidance |
| BS EN 60352-2:1997* IEC 60352-2:1990 | Solderless connections. Solderless crimped connections. General requirements, test methods and practical guidance |
| BS EN 60352-2:2006 | Solderless connections. Crimped connections. General requirements, test methods and practical guidance |
| BS EN 60352-3:1995* IEC 60352-3:1993 | Solderless connections. Solderless accessible insulation displacement connections. General requirements, test methods and practical guidance |
| BS EN 60352-4:1995* IEC 60352-4:1994 | Solderless connections. Solderless non-accessible insulation displacement connections. General requirements, test methods and practical guidance |
| BS EN 60352-5:1995* IEC 60352-5:1995 | Solderless connections. Solderless press-in connections. General requirements, test methods and practical guidance |
| BS EN 60352-5:2001* IEC 60352-5:2001 | Solderless connections. Press-in connections. General requirements, test methods and practical guidance |
| BS EN 60352-6:1998* IEC 60352-6:1997 | Solderless connections. Solderless insulation piercing connections. General requirements, test methods and practical guidance |
| BS EN 60352-7:2002 | Solderless connections. Spring clamp connections. General requirements, test methods and practical guidance |
| BS EN 60570:2003 | Electrical supply track systems for luminaires |
| BS EN 60998-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes. General requirements |
| BS EN 60998-2-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with screw-type clamping units |
| BS EN 60998-2-2:2004 | Connecting devices for low voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| BS EN 60998-2-3:2004 | Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
| BS EN 60998-2-4:2005 | Connecting devices for low voltage circuits for household and similar purposes. Particular requirements for twist-on connecting devices |
| BS EN 60999-1:2000* IEC 60999-1:1999 | Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included) |
| BS EN 60999-2:2003 | Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included) |
| BS EN 61169-8:2007 | Radio-frequency connectors. Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0, 256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC) |
| BS EN 61238-1:2003 | Compression and mechanical connectors for power cables for rated voltages up to 36 kV (Um = 42 kV). Test methods and requirements |
| BS EN 61534-1:2003 | Powertrack systems. General requirements |
| BS EN 61534-21:2006 | Powertrack systems. Particular requirements for powertrack systems intended for wall and ceiling mounting |
| BS EN 61666:1997* IEC 61666:1997 | Identification of terminals within a system |
| BS IEC 60313:2002 | Coaxial connectors used in nuclear laboratory instrumentation |
