| BS 5817-18:1989* IEC 60574-18:1987 | Specification for audiovisual, video and television equipment and systems. Specification for connectors for automatic slide projectors with built-in triacs for audiovisual application |
| BS 6312-1:1994 | Connectors for analogue telecommunication interfaces. Specification for plugs |
| BS 6312-2.1:1994 | Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS 6312:Part 1. Specification for sockets. General requirements |
| BS 6312-2.2:1997 | Connectors for analogue telecommunication interfaces. Sockets for use with plugs specified in BS 6312-1. Particular requirements for fixed socket-outlets used in permanent wiring installations |
| BS 6840:Part 12:1993* IEC 60268-12:1987 | Sound system equipment. Specification for application of connectors for broadcast and similar use |
| BS 7266:Part 1:1990* EN 28877:1989* ISO 8877:1987 | Connectors for access to the Integrated Services Digital Network (ISDN). Specification for a Basic Access Interface connector and its contact assignments |
| BS 7588:1993 | Guide to hierarchical interconnection technology |
| BS 7947:1997* IEC 61602:1996 | Connectors used in the field of audio, video and audiovisual engineering |
| BS 9210 N0006:Part 1:1985 | Detail specification for radio frequency coaxial connectors (series SMA). 50 ohms, unsealed, soldered, centre contact, clamp outer for flexible cables, solder outer for semi-rigid cables. Full assessment level |
| BS 9210 N0006:Part 2:1978 | Detail specification for radio frequency coaxial connectors (series SMA). 50 ohms, unsealed, soldered, centre contact, clamp outer for flexible cables, solder outer for semi-rigid cables. Control drawings. Mating face details and gauge information |
| BS 9210 N0006:Part 3:1985 | Detail specification for radio frequency coaxial connectors (series SMA). 50 ohms, unsealed, soldered, centre contact, clamp outer for flexible cables, solder outer for semi-rigid cables. Parameters. Full assessment level |
| BS 9500:1990 | Specification for sockets of assessed quality for plug-in electronic components: generic data and methods of test |
| BS 9501:1990 | Rules for the preparation of detail specifications for in-line and pin-grid array sockets |
| BS 9520:1983 | Specification for electrical connectors of assessed quality for d.c. and low frequency application: generic data, methods of test and capability approval procedures |
| BS 9521:1983 | Specification for removable contacts of assessed quality for electrical connectors as defined by BS 9520: generic data, methods of test and rules for the preparation of detail specifications |
| BS 9522 N0001:1982 | Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling with front release, rear removable crimp contacts. Full assessment level |
| BS 9522 N0003:1990 | Detail specification for multi-contact circular electrical connectors for d.c. and low frequency applications. Bayonet coupling non-barrier sealed, environment resistant with rear insertable, rear release, rear removable crimp contacts also barrier sealed with non-removable solder contact styles. Full plus airframe fit assessment |
| BS 9522:1990 | Rules for the preparation of detail specifications for circular electrical connectors of assessed quality for d.c. and low frequency applications. Full, basic and full plus airframe assessment levels |
| BS 9523:1984 | Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with integral metal housings for d.c. and low frequency applications. Full and basic assessment levels |
| BS 9524:1984 | Rules for the preparation of detail specifications for rectangular electrical connectors of assessed quality with moulded bodies for d.c. and low frequency applications. Full and basic assessment levels |
| BS 9525 N0001:1982 | Detail specification for multi-contact two-part printed board electrical connectors |
| BS 9525:1984 | Rules for the preparation of detail specifications for two-part printed board electrical connectors and board-mounted transition devices of assessed quality for d.c. and l.f. applications: full and basic assessment levels |
| BS 9526 N0001:1978 | Detail specification for multi-contact edge socket electrical connectors. Single or double sided, closed ended, replaceable contacts, through-board solder or wire wrap terminations. Full assessment level |
| BS 9526 N0002:1979 | Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, metal fixing flanges, guide key location, replaceable contacts, through-board solder or wire wrap terminations. Full assessment level |
| BS 9526 N0003:1979 | Detail specification for multi-contact edge socket electrical connectors. Single or double sided, open ended, guide key location, replaceable contacts, through-board solder or wire wrap terminations. Full assessment level |
| BS 9526:1977 | Rules for the preparation of detail specifications for electrical edge socket connectors of assessed quality - full and basic assessment level |
| BS 9530:1988 | Specification for cable fitting accessories of assessed quality for circular electrical connectors: generic data, methods of test and rules for the preparation of detail specifications |
| BS CECC 75100:1984 | Harmonized system of quality assessment for electronic components. Sectional specification: two-part and edge socket connectors for printed board application |
| BS CECC 75101:1984 | Specification for harmonized system of quality assessment for electronic components. Example detail specification/blank detail specification. Two-part and edge socket connectors for printed board application |
| BS CECC 75201:1992 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Interim example. Detail specification/blank detail specification. Circular connectors for frequencies below 3 MHz |
| BS CECC 75301:1992 | Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Interim Example. Detail specification/blank detail specification: rectangular connectors for frequencies below 3 MHz |
| BS EN 175100:1993 | Harmonized system of quality assessment for electronic components. Sectional specification. Two part and edge socket connectors for printed board applications |
| BS EN 175101-802:2000 | Harmonized system of quality assessment for electronic components. Detail specification. Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows |
| BS EN 175101-809:2000 | Harmonized system of quality assessment for electronic components. Detail specification. Detail Specification: Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75101-801, with assessed quality |
| BS EN 175101-809:2004 | Harmonized system of quality assessment for electronic components. Detail specification. Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality |
| BS EN 175200:1992 | Harmonized system of quality assessment for electronic components: sectional specification: circular connectors |
| BS EN 175200:1997 | Harmonized system of quality assessment for electronic components. Sectional specification: circular connectors |
| BS EN 175201-804:2000 | Harmonized system of quality assessment for electronic components. Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling |
| BS EN 175300:1992 | Harmonized system of quality assessment for electronic components. Sectional specification: rectangular connectors for frequencies below 3 MHz |
| BS EN 175300:1997 | Harmonized system of quality assessment for electronic components. Sectional specification:rectangular connectors for frequencies below 3 MHz |
| BS EN 175301-801:2000 | Harmonized system of quality assessment for electronic components. Detail specification. High density rectangular connectors, round removable crimp contacts |
| BS EN 175301-801:2006 | Detail specification. High density rectangular connectors, round removable crimp contacts |
| BS EN 175301-803:2000 | Harmonized system of quality assessment for electronic components. Detail specification. Rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable |
| BS EN 175301-803:2006 | Detail specification: rectangular connectors. Flat contacts, 0,8 mm thickness, locking screw not detachable |
| BS EN 175500:1997 | Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval |
| BS EN 28877:1994* ISO/IEC 8877:1992 | Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T |
| BS EN 50049-1:1998* BS 6552:1998 | Domestic and similar electronic equipment interconnection requirements. Peritelevision connector |
| BS EN 60068-2-42:2003 | Environmental testing. Test methods. Test Kc. Sulphur dioxide test for contacts and connections |
| BS EN 60068-2-43:2003 | Environmental testing. Test methods. Test Kd. Hydrogen sulphide test for contacts and connections |
| BS EN 60118-12:1997* IEC 60118-12:1996 | Hearing aids. Dimensions of electrical connector systems |
| BS EN 60130-17:1999* IEC 60130-17:1998 | Connectors for frequencies below 3 MHz. Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries |
| BS EN 60130-9:1997* IEC 60130-9:1989 | Connectors for frequencies below 3 MHz. Circular connectors for radio and associated sound equipment |
| BS EN 60130-9:2001* IEC 60130-9:2000 | Connectors for frequencies below 3 MHz. Circular connectors for radio and associated sound equipment |
| BS EN 60268-12:1995* BS 6840-12:1995* IEC 60268-12:1987 | Sound system equipment. Application of connectors for broadcast and similar use |
| BS EN 60352-5:2001* IEC 60352-5:2001 | Solderless connections. Press-in connections. General requirements, test methods and practical guidance |
| BS EN 60352-5:2008 | Solderless connections. Press-in connections. General requirements, test methods and practical guidance |
| BS EN 60512-1-100:2006 | Connectors for electronic equipment. Test and measurements General. Applicable publications |
| BS EN 60512-1-1:2002 | Connectors for electronic equipment. Tests and measurements. General. Test 1a. Visual examination |
| BS EN 60512-1-2:2002 | Connectors for electronic equipment. Tests and measurements. General. Test 1b. Examination of dimension and mass |
| BS EN 60512-10-4:1997* IEC 60512-10-4:1996 | Connectors for electronic equipment. Tests and measurements. Impact tests (free components), static load tests (fixed components), endurance tests and overload tests. Test 10d. Electrical overload (connectors) |
| BS EN 60512-10-4:2003 | Connectors for electronic equipment. Tests and measurements. Test 10d. Electrical overload (connectors) |
| BS EN 60512-11-10:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11j. Cold |
| BS EN 60512-11-11:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11k. Low air pressure |
| BS EN 60512-11-12:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11m. Damp heat, cyclic |
| BS EN 60512-11-13:2002* IEC 60512-11-13:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11n. Gas tightness, solderless wrapped connections |
| BS EN 60512-11-14:2003 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Flowing single gas corrosion test |
| BS EN 60512-11-2:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11b. Combined/sequential cold, low air pressure and damp heat |
| BS EN 60512-11-3:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11c. Damp heat, steady state |
| BS EN 60512-11-4:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11d. Rapid change of temperature |
| BS EN 60512-11-5:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11e. Mould growth |
| BS EN 60512-11-6:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11f. Corrosion, salt mist |
| BS EN 60512-11-7:2003 | Connectors for electronic equipment. Tests and measurements. Flowing mixed gas corrosion test |
| BS EN 60512-11-9:2002 | Connectors for electronic equipment. Tests and measurements. Climatic tests. Test 11i. Dry heat |
| BS EN 60512-12-1:2006 | Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12a. Solderability, wetting, solder bath method |
| BS EN 60512-12-2:2006 | Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12b. Solderability, wetting, soldering iron method |
| BS EN 60512-12-3:2006 | Connectors for electronic equipment. Tests and measurements. Soldering tests. Solderability, de-wetting |
| BS EN 60512-12-4:2006 | Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12d. Resistance to soldering heat, solder bath method |
| BS EN 60512-12-5:2006 | Connectors for electronic equipment. Tests and measurements. Soldering tests. Test 12e. Resistance to soldering heat, soldering iron method |
| BS EN 60512-13-1:2006 | Connectors for electronic equipment. Tests and measurements. Mechanical operation tests. Test 13a: Engaging and separating forces |
| BS EN 60512-13-2:2006 | Connectors for electronic equipment. Tests and measurements. Mechanical operation tests. Test 13b. Insertion and withdrawal forces |
| BS EN 60512-13-5:2006 | Connectors for electronic equipment. Tests and measurements. Mechanical operation tests. Test 13e. Polarizing and keying method |
| BS EN 60512-14-2:2006 | Connectors for electronic equipment. Tests and measurements. Sealing tests. Test 14b. Sealing. Fine air leakage |
| BS EN 60512-14-4:2006 | Connectors for electronic equipment. Tests and measurements. Sealing tests. Test 14d. Immersion. Waterproof |
| BS EN 60512-14-5:2006 | Connectors for electronic equipment. Tests and measurements. Sealing tests. Test 14e. Immersion at low air pressure |
| BS EN 60512-14-6:2006 | Connectors for electronic equipment. Tests and measurements. Sealing tests. Test 14f. Interfacial sealing |
| BS EN 60512-15-1:2008 | Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15a. Contact retention in insert |
| BS EN 60512-15-2:2008 | Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15b. Insert retention in housing (axial) |
| BS EN 60512-15-3:2008 | Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15c. Insert retention in housing (torsional) |
| BS EN 60512-15-4:2008 | Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15d. Contact insertion, release and extraction force |
| BS EN 60512-15-5:2008 | Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15e. Contact retention in insert, cable nutation |
| BS EN 60512-15-6:2008 | Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15f. Effectiveness of connector coupling devices |
| BS EN 60512-15-7:2008 | Connectors for electronic equipment. Tests and measurements. Connector tests (mechanical). Test 15g. Robustness of protective cover attachment |
| BS EN 60512-16-11:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16k. Stripping force, solderless wrapped connections |
| BS EN 60512-16-13:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16m. Un-wrapping, solderless wrapped connections |
| BS EN 60512-16-14:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16n. Bending strength, fixed male tabs |
| BS EN 60512-16-16:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16p. Torsional strength, fixed male tabs |
| BS EN 60512-16-17:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16q. Tensile and compressive strength, fixed male tabs |
| BS EN 60512-16-18:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16r. Deflection of contacts, simulation |
| BS EN 60512-16-1:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16a. Probe damage |
| BS EN 60512-16-2:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16b. Restricted entry |
| BS EN 60512-16-3:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16c. Contact-bending strength |
| BS EN 60512-16-4:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16d. Tensile strength (crimped connections) |
| BS EN 60512-16-5:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16e. Gauge retention force (resilient contacts) |
| BS EN 60512-16-6:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16f. Robustness of terminations |
| BS EN 60512-16-7:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16g. Measurement of contact deformation after crimping |
| BS EN 60512-16-8:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16h. Insulating grip effectiveness (crimped connections) |
| BS EN 60512-16-9:2008 | Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force |
| BS EN 60512-1:2001* IEC 60512-1:2001 | Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. General |
| BS EN 60512-2-1:2002 | Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2a. Contact resistance. Millivolt level method |
| BS EN 60512-2-2:2003 | Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2b. Contact resistance. Specified test current method |
| BS EN 60512-2-3:2002 | Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2c. Contact resistance variation |
| BS EN 60512-2-5:2003 | Connectors for electronic equipment. Tests and measurements. Test 2e. Contact disturbance |
| BS EN 60512-2-6:2002 | Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests. Test 2f. Housing (shell) electrical continuity |
| BS EN 60512-23-4:2001* IEC 60512-23-4:2001 | Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23d. Transmission line reflections in the time domain |
| BS EN 60512-23-7:2005 | Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23g. Effective transfer impedance of connectors |
| BS EN 60512-25-1:2001* IEC 60512-25-1:2001 | Connectors for electronic equipment. Test and measurements Test 25a. Crosstalk ratio |
| BS EN 60512-25-2:2002 | Connectors for electronic equipment. Tests and measurements. Test 25b. Attenuation (insertion loss). Section 2 Attenuation (insertion loss) |
| BS EN 60512-25-3:2001* IEC 60512-25-3:2001 | Connectors for electronic equipment. Test and measurements Test 25c. Rise time degradation |
| BS EN 60512-25-4:2001* IEC 60512-25-4:2001 | Connectors for electronic equipment. Test and measurements Test 25d. Propagation delay |
| BS EN 60512-25-5:2004 | Connectors for electronic equipment. Tests and measurements. Test 25e. Return loss |
| BS EN 60512-25-6:2004 | Connectors for electronic equipment. Tests and measurements. Test 25f. Eye pattern and jitter |
| BS EN 60512-25-7:2005 | Connectors for electronic equipment. Tests and measurements. Test 25g. Impedance, reflection coefficient and voltage standing wave ratio (VSWR) |
| BS EN 60512-25-9:2008 | Connectors for electronic equipment. Tests and measurements. Signal integrity tests. Test 25i. Alien crosstalk |
| BS EN 60512-26-100:2008 | Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7. Tests 26a to 26g |
| BS EN 60512-3-1:2002 | Connectors for electronic equipment. Tests and measurements. Insulation tests. Test 3a. Insulation resistance |
| BS EN 60512-4-1:2003 | Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4a. Voltage proof |
| BS EN 60512-4-2:2002 | Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4b. Partial discharge |
| BS EN 60512-4-3:2002 | Connectors for electronic equipment. Tests and measurements. Voltage stress tests. Test 4c. Voltage proof of pre-insulated crimp barrels |
| BS EN 60512-5-1:2002 | Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests. Test 5a. Temperature rise |
| BS EN 60512-5-2:2002 | Connectors for electronic equipment. Tests and measurements. Current-carrying capacity tests. Test 5b. Current-temperature derating |
| BS EN 60512-6-1:2002 | Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6a. Acceleration, steady state |
| BS EN 60512-6-3:2002 | Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6c. Shock |
| BS EN 60512-6-4:2002 | Connectors for electronic equipment. Tests and measurements. Dynamic stress tests. Test 6d. Vibration (sinusoidal) |
| BS EN 60512-9-3:2006 | Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load |
| BS EN 60603-10:1998* IEC 60603-10:1991 | Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type |
| BS EN 60603-12:1998* IEC 60603-12:1992 | Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits |
| BS EN 60603-13:1998* IEC 60603-13:1995 | Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement terminations (ID) |
| BS EN 60603-14:1999* IEC 60603-14:1998 | Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment |
| BS EN 60603-1:2000* IEC 60603-1:1991 | Connectors for frequencies below 3 MHz for use with printed boards. Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality |
| BS EN 60603-2:1998* IEC 60603-2:1995* QC 010000XX0002:1995 | Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0, 1 in) with common mounting features |
| BS EN 60603-3:1998* IEC 60603-3:1987 | Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing |
| BS EN 60603-4:1998* IEC 60603-4:1987 | Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing |
| BS EN 60603-5:1998* IEC 60603-5:1987 | Connectors for frequencies below 3 MHz for use with printed boards. Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing |
| BS EN 60603-6:1998* IEC 60603-6:1987 | Connectors for frequencies below 3 MHz for use with printed boards. Edge-socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness |
| BS EN 60603-7-1:2002 | Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality |
| BS EN 60603-7-4:2005 | Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
| BS EN 60603-7-7:2002 | Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded) |
| BS EN 60603-7-7:2006 | Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz |
| BS EN 60603-7:1993* IEC 60603-7:1990 | Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for connectors, 8-way, including fixed and free connectors with common mating features |
| BS EN 60603-7:1997* IEC 60603-7:1996 | Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality |
| BS EN 60603-8:1998* IEC 60603-8:1990 | Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0, 63 mm |
| BS EN 60603-9:1998* IEC 60603-9:1990 | Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) |
| BS EN 60838-2-2:2006 | Miscellaneous lampholders. Particular requirements. Connectors for LED-modules |
| BS EN 61076-1:1996* IEC 61076-1:1995* QC 480000 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Generic specification |
| BS EN 61076-1:2006 | Connectors for electronic equipment. Product requirements. Generic specification |
| BS EN 61076-2-001:2002* IEC 61076-2-001:2001 | Connectors for electronic equipment. Circular connectors. Blank detail specification |
| BS EN 61076-2-101:2003+A1:2006 | Connectors for electronic equipment. Circular connectors. Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications |
| BS EN 61076-2-102:2002 | Connectors for electronic equipment. Circular connectors. Circular connectors with assessed quality. Detail specification for plugs and jacks for external low voltage power supply |
| BS EN 61076-2-103:2004 | Connectors for electronic equipment. Circular connectors. Detail specification for a range of multipole connectors (type 'XLR') |
| BS EN 61076-2-105:2008 | Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for M5 connectors with screw-locking |
| BS EN 61076-2:1999* IEC 61076-2:1998 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Circular connectors with assessed quality. Sectional specification |
| BS EN 61076-3-001:2000* IEC 61076-3-001:1999 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Blank detail specification |
| BS EN 61076-3-001:2008 | Connectors for electronic equipment. Product requirements. Rectangular connectors. Blank detail specification |
| BS EN 61076-3-100:2000 | Connectors for use in d.c., low-frequency analogue and digital high-speed data applications. Rectangular connectors with assessed quality. Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row |
| BS EN 61076-3-101:1998* IEC 61076-3-101:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 x 2,54 mm centre-line |
| BS EN 61076-3-103:2004 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
| BS EN 61076-3-104:2003 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum |
| BS EN 61076-3-104:2006 | Connectors for electronic equipment. Product requirements. Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1000 MHz |
| BS EN 61076-3-106:2006 | Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface |
| BS EN 61076-3-110:2008 | Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1000 MHz |
| BS EN 61076-3-112:2006 | Connectors for electronic equipment. Rectangular connectors. Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/video equipment |
| BS EN 61076-3-114:2009 | Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for.protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 11 related to IEC 61076-3-106. Bayonet coupling type |
| BS EN 61076-3-116:2008 | Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface. Variant 13 related to IEC 61076-3-106. Locking lever |
| BS EN 61076-3-117:2009 | Connectors for electronic equipment. Product requirements. Rectangular connectors. Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface. Variant 14 related to IEC 61076-3-106. Push-pull coupling |
| BS EN 61076-3:2000* IEC 61076-3:1999 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors with assessed quality. Sectional specification |
| BS EN 61076-3:2008 | Connectors for electronic equipment. Product requirements. Rectangular connectors. Sectional specification |
| BS EN 61076-4-001:1997* IEC 61076-4-001:1996* QC 480301:1996 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Blank detail specification |
| BS EN 61076-4-100:1998* IEC 61076-4-100:1994* QC 480301XX0001:1994 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connector modules having a grid of 2,5 mm (0,098 in) for printed boards and backplanes |
| BS EN 61076-4-100:2002* IEC 61076-4-100:2001 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes |
| BS EN 61076-4-101:1998* IEC 61076-4-101:1995* QC 480301XX0002:1995 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connector modules having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| BS EN 61076-4-101:2001* IEC 61076-4-101:2001 | Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 |
| BS EN 61076-4-102:1997* IEC 61076-4-102:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
| BS EN 61076-4-103:1999* IEC 61076-4-103:1999 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm. Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards |
| BS EN 61076-4-104:1999* IEC 61076-4-104:1999 | Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm. Detail specification for two part modular connectors (with optional shielding plates) for printed boards and backplanes, basic grid 2,0 mm, with terminations on a multiple grid of 0,5 mm |
| BS EN 61076-4-105:1998* IEC 61076-4-105:1995* QC 480301XX0006:1995 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
| BS EN 61076-4-107:2001* IEC 61076-4-107:2001 | Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
| BS EN 61076-4-108:2002 | Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| BS EN 61076-4-110:2002* IEC 61076-4-110:2001 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function |
| BS EN 61076-4-111:2002 | Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 |
| BS EN 61076-4-113:2003 | Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| BS EN 61076-4-114:2003 | Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm |
| BS EN 61076-4-115:2003 | Connectors for electronic equipment. Printed board connectors with assessed quality. Backplane connector for InfiniBand equipment |
| BS EN 61076-4:1997* IEC 61076-4:1995* QC 480300:1995 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Sectional specification. Printed board connectors |
| BS EN 61076-5:2001* IEC 61076-5:2001 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. In-line sockets with assessed quality. Sectional specification |
| BS EN 61076-6:2004 | Connectors for electronic equipment. Loose part contacts. Sectional specification |
| BS EN 61076-7-001:2004 | Connectors for electronic equipment. Cable outlet accessories. Blank detail specification |
| BS EN 61076-7-100:2006 | Connectors for electronic equipment. Product requirements. Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
| BS EN 61076-7:2001* IEC 61076-7:2000 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification |
| BS EN 61169-24:2009 | Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F) |
| BS EN 61169-2:2007 | Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors of type 9,52 |
| BS EN 61984:2001* IEC 61984:2001 | Connectors. Safety requirements and tests |
| BS EN 61984:2009 | Connectors. Safety requirements and tests |
| BS EN 62197-1:2006 | Connectors for electronic equipment. Quality assessment requirements. Generic specification |
| BS QC 030000:1993* IEC 60807-1:1991 | Harmonized system of quality assessment for electronic components. Rectangular connectors for frequencies below 3 MHz. Generic specification. General requirements and guide for the preparation of detail specifications for connectors with assessed quality |
| DD IEC/PAS 61076-2-107:2007 | Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking |
| DD IEC/PAS 61076-2-108:2009 | Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101 |
