IHS Logo IHS - The Source for Critical Information and Insight BSi Logo
British Standards Online Heading
How to subscribe to British Standards Online
  Need a quote from IHS?
  The British Standards Online service is available via subscription from IHS. To speak to an expert about this service, please call:
+44 (0)1344 328300 or complete the
form below

Request an IHS quote for
British Standards Online
 
IHS Logo

BSi Logo
The following lists the key subject areas for this British Standards module.
Click the links to view the associated British Standards for each area.

Home >
Road vehicle engineering ( Module 27 ) >

Electrical and electronic equipment, Road vehicle engineering ( Module 27 )
BS 5942-11:1989* IEC 60581-11:1981High fidelity audio equipment and systems; minimum performance requirements. Specification for high fidelity systems for use in vehicles (for example, motor cars); general requirements
BS 6765-3:1989* ISO 8818:1988Leisure accommodation vehicles. Caravans. Specification for 12 V direct current extra low voltage electrical installations
BS 6862-1:1971Specification for cables for vehicles. Cables with copper conductors
BS AU 149a:1980Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 N (normal)
BS AU 16a:1989Specification for electrical cable connectors (17.5 A maximum continuous rating)
BS AU 177a:1980Specification for electrical connections between towing vehicles and trailers with 6 V or 12 V electrical equipment: type 12 S (supplementary)
BS AU 194:1984Specification for performance of electrical connections between towing vehicles and trailers
BS AU 195a:1991* ISO 4009:1989Specification for mounting electrical connections on rear cross members of towing vehicles
BS AU 196:1984Specification for electrical connections between 24 V trailer antilock braking systems and towing vehicles
BS AU 197:1984Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 N (normal)
BS AU 198:1984Specification for electrical connections between towing vehicles and trailers with 24 V electrical equipment: type 24 S (supplementary)
BS AU 201-2:1985* ISO 7880-1984Relays and flashers. Specification for arrangement and functional attribution of relay terminals for road vehicles
BS AU 201:Part 1:1985* ISO 7588-1983Relays and flashers. Specification for mounting and positioning dimensions of male tabs and socket apertures for relays and flashers for road vehicles
BS AU 227:1988* ISO 7467:1987Specification for dimensions of cylindrical shaft ends and hubs for alternators for commercial vehicles and buses
BS AU 231:1989* ISO 4141:1988Specification for seven-core connecting cable for road vehicles
BS AU 232:1989* ISO 8854:1988Methods of test and general requirements for road vehicle alternators with regulators
BS AU 237a:1993Specification for light domestic duty jumper lead sets for automotive starting
BS AU 243-1:1991* ISO 7637-0:1990Methods of test for electrical disturbance by conduction and coupling. General
BS AU 243-2:1991* ISO 7637-1:1990Methods of test for electrical disturbance by conduction and coupling. Electrical transient conduction along supply lines only on passenger cars and light commercial vehicles with 12 V supply
BS AU 243-3:1991* ISO 7637-2:1990Methods of test for electrical disturbance by conduction and coupling. Electrical transient conduction along supply lines only on commercial vehicles with 24 V supply
BS AU 250:1993* ISO 7651:1991Specification for mounting dimensions of alternators, types 1, 2 and 3 for commercial vehicles and buses
BS AU 255-1:1994* ISO 6722-3:1993Road vehicle unscreened low tension cables. Specification for conductor sizes and dimensions for thick walled insulated cables
BS AU 255-2:1994* ISO 6722-4:1993Road vehicle unscreened low tension cables. Specification for conductor sizes and dimensions for thin walled insulated cables
BS AU 7a:1983Specification for colour code for road vehicle electrical cables
BS AU 88a:1985Recommendations for ratings for light duty cables for automobile use
BS AU 91:1965Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system)
BS EN 1648-1:1998Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Caravans
BS EN 1648-1:2004Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Caravans
BS EN 1648-2:1998Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Motor caravans
BS EN 1648-2:2005Leisure accommodation vehicles. 12 V direct current extra low voltage electrical installations. Motor caravans
BS EN 24165:1992* ISO 4165:1979Road vehicles. Electrical connections. Double-pole connector
BS EN 28092-1:1992* ISO 8092-1:1989Road vehicles. Flat, quick-connect terminations. Tabs for single pole connections
BS EN 28092-2:1992* ISO 8092-2:1988Road vehicles. Flat, quick-connect terminations. Tests and performance requirements for single pole connections
BS EN 50436-1:2005Alcohol interlocks. Test methods and performance requirements. Instruments for drink-driving-offender programs
BS EN 50436-2:2007Alcohol interlocks. Test methods and performance requirements. Instruments having a mouthpiece and measuring breath alcohol for general preventive use
BS EN ISO 11446:2002Passenger cars and light commercial vehicles with 12 V systems. 13-pole connectors between towing vehicles and trailers. Dimensions and contact allocation
BS EN ISO 11446:2004Road vehicles. Connectors for the electrical connection of towing and towed vehicles. 13-pole connectors for vehicles with 12 V nominal supply voltage
BS EN ISO 15006:2004Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and compliance procedures for in-vehicle auditory presentation
BS EN ISO 4165:2003Road vehicles. Electrical connections. Double-pole connection
BS EN ISO 8092-1:1998Road vehicles. Connections for on-board electrical wiring harnesses. Tabs for single-pole connections. Dimensions and specific requirements
BS EN ISO 8092-2:1998Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements
BS EN ISO 8092-2:2002Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements
BS EN ISO 8092-2:2005Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements
BS EN ISO 8092-3:1999Road vehicles. Connections for on-board electrical wiring harnesses. Tabs for multi-pole connections. Dimensions and specific requirements
BS EN ISO 8092-4:1999Road vehicles. Connections for on-board electrical wiring harnesses. Pins for single- and multi-pole connections. Dimensions and specific requirements
BS ISO 11451-1:2005+A1:2008Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. General principles and terminology
BS ISO 11451-3:2007Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. On-board transmitter simulation
BS ISO 11451-4:2006Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. Bulk current injection (BCI)
BS ISO 11452-4:2005Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Bulk current injection (BCI)
BS ISO 11452-8:2007Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Immunity to magnetic fields
BS ISO 14572:2006Road vehicles. Round, screened and unscreened, 60 V and 600 V multi-core sheathed cables. Test methods and requirements for basic and high-performance cables
BS ISO 15031-5:2006Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Emissions-related diagnostic services
BS ISO 15031-6:2005Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Diagnostic trouble code definitions
BS ISO 16750-1:2006Road vehicles. Environmental conditions and testing for electrical and electronic equipment. General
BS ISO 16750-2:2006Road vehicles. Environmental conditions and testing for electrical & electronic equipment. Electrical loads
BS ISO 16750-3:2007Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Mechanical loads
BS ISO 16750-4:2006Road vehicles. Environmental conditions and testing for electrical & electronic equipment. Climatic loads
BS ISO 19072-1:2007Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Pocket interface definition
BS ISO 19072-2:2007Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Test methods and general performance requirements
BS ISO 19813:2006Road vehicles. Ignition systems. Test methods and requirements for high voltage boots on plug-top coils and pencil coils
BS ISO 20653:2006Road vehicles. Degrees of protection (IP-Code). Protection of electrical equipment against foreign objects, water and access
BS ISO 21848:2005Road vehicles. Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads
BS ISO 25981:2008Road vehicles. Connectors for the electrical connection of towing and towed vehicles. Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
BS ISO 4141-1:2005Road vehicles. Multi-core connecting cables. Test methods and requirements for basic performance sheathed cables
BS ISO 4141-2:2006Road vehicles. Multi-core connecting cables. Test methods and requirements for high performance sheathed cables
BS ISO 4141-3:2006Road vehicles. Multi-core connecting cables. Construction, dimensions and marking of unscreened sheathed low-voltage cables
BS ISO 6722:2006Road vehicles. 60 V and 600 V single-core cables. Dimensions, test methods and requirements
BS ISO 7588-1:1998Road vehicles. Electrical/electronic switching devices. Relays and flashers
BS ISO 7588-2:1998Road vehicles. Electrical/electronic switching devices. Electronic devices
BS ISO 7588-3:1998Road vehicles. Electrical/electronic switching devices. Microrelays
BS ISO 7637-3:2007Road vehicles. Electrical disturbances from conduction and coupling. Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
BS ISO 8820-2:2005Road vehicles. Fuse-links. User's guide
BS ISO 8820-5:2007Road vehicles. Fuse-links. Fuse-links with axial terminals (strip fuse-links) types SF 30 and SF 51 and test fixtures
BS ISO 8820-6:2007Road vehicles. Fuse-links. Single-bolt fuse-links
BS ISO 8820-7:2007Road vehicles. Fuse-links. Fuse-links with tabs (Type G) with rated voltage of 450 V
DD ISO/PAS 27145-1:2006Road vehicles. Implementation of WWH-OBD communication requirements. General information and use case definition
DD ISO/PAS 27145-2:2006Road vehicles. Implementation of WWH-OBD communication requirements. Common emissions-related data dictionary
DD ISO/PAS 27145-3:2006Road vehicles. Implementation of WWH-OBD communication requirements. Common message dictionary
DD ISO/PAS 27145-4:2006Road vehicles. Implementation of WWH-OBD communication requirements. Connection between vehicle and test equipment
DD ISO/TS 16553:2006Road vehicles. Data cables. Test methods and requirements
IHS experience – your advantage

IHS, formerly known as Technical Indexes, is one of the foremost providers of standards, regulatory, product and supplier information to industries worldwide including construction, health & safety, engineering, education, rail, energy, automotive, defence and many more. With over 45 years experience and more than 6000 customers based in the UK alone, IHS is the only company of its type providing access to several million pages of vital information.

The British Standard Service provided by IHS focuses on supplying you an established, authoritative, reliable and comprehensive information source.

How to subscribe to British Standards Online