| BS 1802:1951 | Specification for steel spring washers for general engineering and automobile purposes |
| BS 3425:1966 | Method for the measurement of noise emitted by motor vehicles |
| BS 4464:1969 | Specification for spring washers for general engineering and automobile purposes. Metric series |
| BS 5956:1980 | Specification for A6-size microfiche for the motor industry |
| BS 6086:1981* ISO 5128-1980 | Method of measurement of noise inside motor vehicles |
| BS 6109-1:1981 | Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for tail lifts |
| BS 6109-2:1989 | Tail lifts, mobile lifts and ramps associated with vehicles. Code of practice for passenger lifts and ramps |
| BS AU 144b:1977 | Specification for retreaded car and commercial vehicle tyres |
| BS AU 144f:1988 | Specification for retreaded car and commercial vehicle tyres |
| BS AU 145a:1972 | Specification for reflex-reflecting number plates |
| BS AU 145d:1998 | Specification for retroreflecting number plates |
| BS AU 148-10:1969 | Methods of test for motor vehicle paints. Resistance to heat and corrosion |
| BS AU 148-11:1969 | Methods of test for motor vehicle paints. Resistance to blistering |
| BS AU 148-12:1969 | Methods of test for motor vehicle paints. Resistance to accelerated weathering |
| BS AU 148-13:1969 | Methods of test for motor vehicle paints. Resistance to deterioration by contact with other materials |
| BS AU 148-14:1969 | Methods of test for motor vehicle paints. Resistance to outdoor exposure |
| BS AU 148-15:1969 | Methods of test for motor vehicle paints. Resistance to chipping |
| BS AU 148-2:1969 | Methods of test for motor vehicle paints. Resistance to continuous salt spray |
| BS AU 148-3:1969 | Methods of test for motor vehicle paints. Flexibility and adhesion |
| BS AU 148-4:1969 | Methods of test for motor vehicle paints. Resistance to abrasion |
| BS AU 148-5:1969 | Methods of test for motor vehicle paints. Gloss measurement |
| BS AU 148-6:1969 | Methods of test for motor vehicle paints. Hardness |
| BS AU 148-9:1969 | Methods of test for motor vehicle paints. Resistance to dry heat |
| BS AU 159e:1990 | Specification for repairs to tyres for motor vehicles used on the public highway |
| BS AU 159f:1997 | Specification for repairs to tyres for motor vehicles used on the public highway |
| BS AU 164:1977* ISO 3784-1976 | Specification for measurement of impact velocity in collision tests on road vehicles |
| BS AU 169a:1992* ISO 3795:1989 | Method for determination of burning behaviour of interior materials for road vehicles, and tractors and machinery for agriculture and forestry |
| BS AU 173:1979 | Definitions for a three-dimensional reference system and fiducial marks |
| BS AU 175-1b:1983* ISO 3779-1983 | Vehicle identification numbers (VIN). Specification for content and structure |
| BS AU 175-2b:1983* ISO 3780-1983 | Vehicle identification numbers (VIN). Specification for world manufacturer identifier (WMI) codes |
| BS AU 175-3b:1983* ISO 4030:1983 | Vehicle identification numbers (VIN). Specification for location and attachment |
| BS AU 175-4a:1997 | Vehicle identification numbers (VIN). Specification for a visible vehicle identification number |
| BS AU 176:1980* ISO 4513-1978 | Method for establishment of eyellipses for driver's eye location |
| BS AU 184:1982* ISO 4100-1980 | Specification for world parts manufacturer identifier code (WPMI) for road vehicles |
| BS AU 189:1983* ISO 4138-1982 | Method of test for steady state cornering behaviour for road vehicles |
| BS AU 191:1983* ISO 6813-1981 | Glossary of terms for road vehicle collisions |
| BS AU 205:1986* ISO 7975-1985 | Method of test for effect of braking on steady state cornering behaviour of road vehicles |
| BS AU 206-3:1986* ISO 7342-1982 | Diagnostic systems for road vehicles. Specification for general requirements for testing ignition systems |
| BS AU 224a:1988 | Specification for portable wheel ramps for cars and light vans |
| BS AU 228-1:1989* ISO 6487:1987 | Impact tests on road vehicles. Specification for measurement techniques and general instrumentation |
| BS AU 228-1a:2000* ISO 6487:2000 | Impact tests on road vehicles. Specification for measurement techniques and general instrumentation |
| BS AU 228-1b:2002* ISO 6487:2002 | Impact tests on road vehicles. Specification for measurement techniques and general instrumentation |
| BS AU 228-2:1989* ISO 8721:1987 | Impact tests on road vehicles. Specification for measurement techniques using optical instrumentation |
| BS AU 230:1989* ISO 7401:1988 | Methods of test for lateral transient response behaviour of passenger cars |
| BS AU 244:1992* ISO 8855:1991 | Glossary of terms for road vehicle dynamics and road holding ability |
| BS AU 246:1992* ISO 10392:1992 | Method for determination of the centre of gravity of road vehicles with two axles |
| BS AU 256:1994* ISO 9816:1993 | Passenger cars. Power-off reactions of a vehicle in a turn. Open-loop test method |
| BS AU 258:1995 | Specification for elasticated straps |
| BS EN 12195-3:2001 | Load restraint assemblies on road vehicles. Safety. Lashing chains |
| BS EN 60349-2:2001 | Railway applications. Rotating electrical machines for rail and road vehicles. Electronic convertor-fed alternating current motors |
| BS EN ISO 14505-2:2006 | Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles. Determination of equivalent temperature |
| BS EN ISO 14505-3:2006 | Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles. Evaluation of thermal comfort using human subjects |
| BS EN ISO 20566:2006 | Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory car-wash |
| BS ISO 10521-1:2006 | Road vehicles. Road load. Determination under reference atmospheric conditions |
| BS ISO 10521-2:2006 | Road vehicles. Road load. Reproduction on chassis dynamometer |
| BS ISO 10844:1994 | Acoustics. Specification of test tracks for the purpose of measuring noise emitted by road vehicles |
| BS ISO 11096:2002 | Road vehicles. Pedestrian protection. Impact test method for pedestrian thigh, leg and knee |
| BS ISO 12353-1:2002 | Road vehicles. Traffic accident analysis. Vocabulary |
| BS ISO 13674-1:2003 | Road vehicles. Test method for the quantification of on-centre handling. Weave test |
| BS ISO 13674-2:2006 | Road vehicles. Test method for the quantification of on-centre handling. Transition test |
| BS ISO 14794:2003 | Heavy commercial vehicles and buses. Braking in a turn. Open-loop test methods |
| BS ISO 15828:2004 | Road vehicles. Offset frontal impact test procedure |
| BS ISO 15829:2004 | Road vehicles. Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation |
| BS ISO 15830-1:2005 | Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Terminology and rationale |
| BS ISO 15830-2:2005 | Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Mechanical subsystems |
| BS ISO 15830-3:2005 | Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. Electronic subsystems |
| BS ISO 15830-4:2005 | Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy. User's manual |
| BS ISO 16850:2007 | Road vehicles. Pedestrian protection. Child head impact test method |
| BS ISO 16992:2006 | Passenger car tyres. Spare unit substitutive equipment (SUSE) |
| BS ISO 20176:2006 | Road vehicles. H-Point machine (HPM II). Specifications and Procedure for H-point determination |
| BS ISO 20828:2006 | Road vehicles. Security certificate management |
| BS ISO 22628:2002 | Road vehicles. Recyclability and recoverability. Calculation method |
| BS ISO 362-1:2007 | Measurement of noise emitted by accelerating road vehicles. Engineering method. M and N categories |
| BS ISO 362:1998 | Acoustics. Measurement of noise emitted by accelerating road vehicles. Engineering method |
| BS ISO 3888-1:1999 | Passenger cars. Test track for a severe lane-change manoeuvre. Double-lane change |
| BS ISO 5130:2007 | Acoustics. Measurements of sound pressure level emitted by stationary road vehicles |
| BS ISO 6813:1998 | Road vehicles. Collision classification. Terminology |
| BS ISO 7401:2003 | Road vehicles. Lateral transient response test methods. Open-loop test methods |
| BS ISO 8349:2002 | Road vehicles. Measurement of road surface friction |
| DD ISO/TS 15827:2007 | Road vehicles. Test procedures. Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags |
| PAS 80:2005 | Automotive garage services - Service and repair of vehicles - Technical and customer service - Specification |
| PD ISO/TR 12350:2004 | Road vehicles. Injury risk curves for evaluation of occupant protection in side impact |
| PD ISO/TS 16949:1999* ISO/TS 16949:1999 | Quality systems. Automotive suppliers. Particular requirements for the application of ISO 9001:1994 |
| PD ISO/TS 16949:2002 | Quality management systems. Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations |
| TH 42043 | Motor Vehicles and Equipment. An international guide to the application of EC, ECE and national approval schemes |
