| BS 2X 18:1965 | Specification for shellac varnish for aeronautical purposes |
| BS 2X 26:2001 | Doping and finishing schemes for fabric covered aircraft |
| BS 2X 27:1991 | Specification for cellulose finishing scheme for aerospace purposes |
| BS 2X 32:1998 | Specification for pre-treatment etch primer for aerospace purposes |
| BS 2X 33:1998 | Specification for two component epoxy primer for aerospace purposes |
| BS 2X 34:1998 | Specification for two component polyurethane finish for aerospace purposes |
| BS 2X 35:2003 | Selectively removable intermediate coating for aerospace purposes |
| BS 3G 229:1993 | Schedule for environmental conditions and test procedures for airborne equipment |
| BS 4X 17:1986 | Specification for varnish for aerospace purposes |
| BS 5X 17:1998 | Specification for oleoresinous varnish for aerospace purposes |
| BS EN 2002-1:2005 | Aerospace series. Metallic materials. Test methods. Tensile testing at ambient temperature |
| BS EN 2133:1998 | Cadmium plating of steels with specified tensile strength ≤ 1450 MPa, copper, copper alloys and nickel alloys |
| BS EN 2334:1997 | Chromic-sulphuric acid pickle of aluminium and aluminium alloys |
| BS EN 2434-005:2006 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High flexibility and chemical agent resistance for military application |
| BS EN 2435-001:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. Minimum requirements |
| BS EN 2435-002:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance |
| BS EN 2435-003:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion and fluid resistance |
| BS EN 2435-004:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance |
| BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer. High corrosion resistance for military application |
| BS EN 2436-001:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. Basic requirements |
| BS EN 2436-002:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion resistance |
| BS EN 2436-003:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance |
| BS EN 2436-004:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. High corrosion and fluid resistance with surface preparation tolerance |
| BS EN 2436-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing primer. For exterior use with surface preparation tolerance |
| BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer. High corrosion resistance for military application |
| BS EN 2437:2002 | Aerospace series. Chromate conversion coatings (yellow) for aluminium and aluminium alloys |
| BS EN 2491:1997 | Molybdenum disulphide dry lubricants. Coating methods |
| BS EN 2516:1997 | Passivation of corrosion resisting steels and decontamination of nickel base alloys |
| BS EN 2536:1995 | Hard anodizing of aluminium alloys |
| BS EN 2574:1990 | Specification for welds. Information on drawings |
| BS EN 2808:1997 | Anodizing of titanium and titanium alloys |
| BS EN 2828:1993 | Adhesion test for metallic coatings by burnishing |
| BS EN 2829:1995 | Adhesion test for metallic coatings by shot peening |
| BS EN 2830:1993 | Adhesion test for metallic coatings by shearing action |
| BS EN 3212:1995 | Paints and varnishes. Corrosion test by alternate immersion in a buffered sodium chloride solution |
| BS EN 3665:1997 | Test methods for paints and varnishes. Filiform corrosion resistance test on aluminium alloys |
| BS EN 3769:1997 | Electrolytic polishing of corrosion resisting steels and heat resisting alloys |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| BS EN 4158:2006 | Aerospace series. Paints and varnishes. Test method for measurement of electrical surface resistance of conductive layers |
| BS EN 4170:2007 | Aerospace series. Paints and varnishes. Test method for measurement of resistance to cold crack temperature cycle |
| BS EN 4382:2006 | Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Solution treated. Seamless tubes. For hydraulic application. D ≤ 50 mm, a ≤ 3 mm |
| BS EN 4406:2006 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane coating. Abrasion resistant |
| BS EN 4508:2006 | Aerospace series. Paints and varnishes. Test method for anti slip coatings. Determination of the sliding friction behaviour |
| BS EN 4588:2007 | Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip |
| BS EN 4592:2006 | Aerospace series. Paints and varnishes. Test method for determination of infrared reflectance |
| BS G 211:1971 | Specification for reflection-reducing coating of instrument windows and lighting wedges |
| BS M 40:1972 | Methods for measuring coating thickness by non-destructive testing |
| BS M 58:1986* ISO 8080-1985 | Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process |
| BS M 93:2005 | Protection of magnesium-rich alloys against corrosion. Specification |
| BS X 26:1966 | Specification for doping and finishing schemes for fabric covered aircraft |
| BS X 31:1967 | Specification for low temperature stoving scheme for aeronautical purposes |
| BS X 32:1991 | Specification for pretreatment primer for aerospace purposes |
| BS X 33:1991 | Specification for two component epoxy primer for aerospace purposes |
| BS X 34:1992 | Specification for air drying, two component, polyurethane finish for aerospace purposes |
| BS X 35:1998 | Specification for selectively removable intermediate coating for aerospace purposes |
| BS X 36:1998 | Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes |
| BS X 37:2004 | Intumescent paint for aerospace purposes. Specification |
| BS X 38:2005 | Heat curing paint scheme for aerospace purposes. Specification |
