Aluminium, Materials for aerospace construction ( Module 31 ), British Standards, IHS

BS 2000:Part 105:1991	Methods of test for petroleum and its products. Recovery of bituminous binders by dichloromethane extraction
BS 2L 169:2002	Ingots (as cast) and castings (solution treated and artificially aged) of aluminium-silicon-magnesium alloy (Si 7, Mg 0 6)
BS 2L 77:1971	Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 2L 83:1971	Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
BS 2L 84:1971	Specification for bars and extruded sections of aluminium-copper-silicon-magnesium alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 1.5, Si 1, Mg 0.8)
BS 2L 85:1971	Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
BS 2L 87:1971	Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 2L 88:1971	Specification for aluminium-alloy-coated sheet and strip of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
BS 2L 91:1970	Specification for ingots and castings of aluminium-copper alloy (165 MN/m� 0.2 per cent proof stress) (Cu 4.5)
BS 2L 92:1970	Specification for ingots and castings of aluminium-copper alloy (200 MN/m� 0.2 per cent proof stress) (Cu 4.5)
BS 2L 93:1971	Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 2L 95:1971	Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
BS 2L 97:1971	Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
BS 2L 98:1971	Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature: not controlled stretched) (Cu 4.4, Mg 1.5 Mn 0.6)
BS 2L 99:1972	Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)
BS 3L 51:1970	Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
BS 3L 58:1971	Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)
BS 3L 63:1971	Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS 3L 78:1970	Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
BS 3L 80:1985	Specification for sheet and strip of aluminium-2 1/4% magnesium alloy (temper designation-O)
BS 3L 81:1985	Specification for sheet and strip of aluminium-2 1/4% magnesium alloy (temper designation H16 or H26)
BS 3L 86:1971	Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
BS 4L 100:1993	Procedure for inspection, testing and acceptance of wrought aluminium and aluminium alloys
BS 4L 101:1990	Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings
BS 4L 35:1970	Specification for ingots and castings of 'Y' aluminium alloy (heat treated) (suitable for pistons) (Cu 4, Mg 1.5, Ni 2.1)
BS 4L 53:1970	Specification for ingots and castings of aluminium-magnesium alloy (solution treated) (Mg 10.2)
BS 4L 59:1985	Specification for sheet and strip of aluminium-manganese alloy (temper designation H16 or H26)
BS 4L 60:1985	Specification for sheet and strip of aluminium-manganese alloy (temper designation H12 or H22)
BS 4L 61:1985	Specification for sheet and strip of aluminium-manganese alloy (temper designation-O)
BS 5L 34:1985	Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
BS 5L 36:1985	Specification for wire for solid, cold-forged rivets of 99 5% aluminium (not exceeding 10 mm diameter)
BS 5L 44:1985	Specification for forging stock, bars, extruded sections and forgings of aluminium-2 1/4% magnesium alloy
BS 6L 16:1985	Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)
BS 6L 17:1985	Specification for sheet and strip of 99% aluminium (temper designation-O)
BS 7L 37:1989	Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
BS EN 2004-1:1993	Test methods for aluminium and aluminium alloy products. Determination of electrical conductivity of wrought aluminium alloys
BS EN 2004-5:1993	Test methods for aluminium and aluminium alloy products. Determination of cladding thickness and copper diffusion of clad semi-finished products
BS EN 2044:2001	Aerospace series. Round bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Diameter 4 mm ≤ D ≤ 63 mm. Dimensions
BS EN 2045:2001	Aerospace series. Square bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Thickness 6 mm ≤ a ≤ 50 mm. Dimensions
BS EN 2046:2001	Hexagonal bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Width across flats 7 mm ≤ a ≤ 50 mm. Dimensions
BS EN 2047:2001	Aerospace series. Beaded L-section extruded, in aluminium and aluminium alloys. Dimensions
BS EN 2048:2001	Aerospace series. Extruded L-section in aluminium alloys. Dimensions
BS EN 2049:2001	Aerospace series. Extruded channel section, in aluminium alloys. Dimensions
BS EN 2050:2001	Aerospace series. Extruded T-section, in aluminium alloys. Dimensions
BS EN 2066:2002	Aerospace series. Extruded section in aluminium alloys. General tolerances
BS EN 2070-1:1991	Specification for aluminium and aluminium alloy wrought products. Technical specification. General requirements
BS EN 2070-2:1991	Specification for aluminium and aluminium alloy wrought products. Technical specification. Sheet, strip formed profiles and plate
BS EN 2070-3:1991	Specification for aluminium and aluminium alloy wrought products. Technical specification. Bar and section
BS EN 2070-4:1991	Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube for structures
BS EN 2070-5:1991	Specification for aluminium and aluminium alloy wrought products. Technical specification. Tube used under pressure
BS EN 2070-6:1991	Specification for aluminium and aluminium alloy wrought products. Technical specification. Rivet wire
BS EN 2070-7:1991	Specification for aluminium and aluminium alloy wrought products. Technical specification. Wrought forging stock
BS EN 2071:2002	Aerospace series. Sheets in aluminium and aluminium alloys Thickness 0,25 mm ≤ a ≤ 6 mm. Dimensions
BS EN 2072:1994	Aluminium alloy AL-P1050A-H14. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2072:2005	Aerospace series. Aluminium AL-P1050A. H14. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 2076-1:1991	Aluminium and magnesium alloy ingots and castings. Technical specification. General requirements
BS EN 2076-2:1991	Aluminium and magnesium alloy ingots and castings. Technical specification. Ingots for remelting
BS EN 2076-3:1991	Aluminium and magnesium alloy ingots and castings. Technical specification. Pre-production and production castings
BS EN 2082-1:1991	Specification for aluminium alloy forging stock and forgings. Technical specification. General requirements
BS EN 2082-2:1991	Specification for aluminium alloy forging stock and forgings. Technical specification. Forging stock
BS EN 2082-3:1991	Specification for aluminium alloy forging stock and forgings. Technical specification. Pre-production and production forgings
BS EN 2085:2004	Aerospace series. Aluminium alloy AL-P2618A-T6. Hand and die forgings. a ≤ 150 mm
BS EN 2086:2004	Aerospace series. Aluminium alloy AL-P2618A-T851. Hand and die forgings. a ≤ 150 mm
BS EN 2087:2005	Aerospace series. Aluminium alloy AL-P2014A. T6 or T62. Clad sheet & strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2088:2005	Aerospace series. Aluminium alloy AL-P2014A. T4 or T42. Clad sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 2089:1994	Aluminium alloy AL-P2014A-T6 or T62. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2089:2005	Aluminium alloy AL-P2014A T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 2090:2005	Aluminium alloy AL-P2024-T3. Clad sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 2092:1994	Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip 0 4 mm ≤ a ≤ 6 mm
BS EN 2092:2005	Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Clad sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 2093:1992	Aluminium alloy AL-P7009-T74. Hand forgings 20 mm ≤ a ≤ 150 mm
BS EN 2094:1992	Aluminium alloy AL-P7009-T74. Die forgings 3 mm ≤ a ≤ 150 mm
BS EN 2100:1992	Aluminium alloy AL-P2014A-T4511. Extruded bars and sections a or D ≤ 200 mm
BS EN 2101:1991	Specification for chromic acid anodizing of aluminium and wrought aluminium alloys
BS EN 2115:2009	Aerospace series. Aluminium alloy 2117-T42. Wire for solid rivets. D ≤ 10 mm
BS EN 2116:2009	Aerospace series. Aluminium alloy 2017A-T42. Wire for solid rivets. D ≤ 10 mm
BS EN 2117:2009	Aerospace series. Aluminium alloy AL-P5056A (5056A)-H32. Wire for solid rivets. D ≤ 10 mm
BS EN 2126:1992	Aluminium alloy AL-P7075-T651. Plate 6 mm < a ≤ 80 mm
BS EN 2127:1992	Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D ≤ 100 mm
BS EN 2128:1992	Aluminium alloy AL-P7075-T7351. Drawn bars 6 mm ≤ a or D ≤ 75 mm
BS EN 2131:2002	Aerospace series. Plates in aluminium alloys. Thickness 6 mm < a ≤ 160 mm. Dimensions
BS EN 2134:2002	Aerospace series. Round bars, extruded in aluminium and aluminium alloys. Diameter 10 mm ≤ D ≤ 220 mm. Dimensions
BS EN 2256:2004	Aerospace series. Aluminium alloy AL-P2618A-T852. Hand and die forgings. a ≤ 150 mm
BS EN 2284:1991	Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys
BS EN 2318:1992	Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm
BS EN 2326:1992	Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D ≤ 200 mm
BS EN 2381:1992	Aluminium alloy AL-P7009-T7452. Hand forgings 40 mm ≤ a ≤ 150 mm
BS EN 2384:1992	Aluminium alloy AL-P2014A-T6511. Extruded bars and sections a or D ≤ 150 mm
BS EN 2385:1992	Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D ≤ 125 mm
BS EN 2395:1994	Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2395:2005	Aerospace series. Aluminium alloy AL-P2014A-T4 or T42. Sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 2422:2005	Aluminium alloy AL-P2124-T351. Plate. 25 mm < a ≤ 120 mm
BS EN 2486:2005	Aerospace series. Aluminium alloy AL-P2618A. Forging stock
BS EN 2511:2005	Aluminium alloy AL-P7075-T7351. Plate. 6 mm < a ≤ 100 mm
BS EN 2599:2001	Aerospace series. Strips in aluminium and aluminium alloys Thickness 0,25 mm ≤ a ≤ 3.2 mm. Dimensions
BS EN 2630:1994	Aluminium alloy AL-P7009-T74511. Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control
BS EN 2632:1994	Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D ≤ 100 mm with peripheral coarse grain control
BS EN 2632:2005	Aerospace series. Aluminim alloy AL-P7075. T73511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 2633:1994	Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm with peripheral coarse grain control
BS EN 2635:2005	Aerospace series. Aluminium alloy AL-P2014A. T6511. Extruded bar and section. a or D ≤ 200 mm with peripheral coarse grain control
BS EN 2636:1994	Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control
BS EN 2681:2004	Aerospace series. Aluminium alloy AL-P7010-T74. Hand and die forgings. a ≤ 150 mm
BS EN 2684:2004	Aerospace series. Aluminium alloy AL-P7010-T7651. Plate. 6 mm < a ≤ 140 mm
BS EN 2687:2004	Aerospace series. Aluminium alloy AL-P7010-T7451. Plate. 6 mm < a ≤ 160 mm
BS EN 2693:1994	Aluminium alloy. AL-P5086-H111. Sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 2693:2005	Aerospace series. Aluminium alloy AL-P5086-H111. Sheet and strip. 0,3 mm ≤a ≤6 mm
BS EN 2694:1994	Aluminium alloy. AL-P6061-T6 or T62. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2694:2005	Aerospace series. Aluminium alloy AL-P6061-T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 2695:1994	Aluminium alloy. AL-P6081-T6. Sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 2695:2005	Aerospace series. Aluminium alloy AL-P6081-T6. Sheet and strip. 0,3 mm ≤a ≤6 mm
BS EN 2696:1994	Aluminium alloy. AL-P7075-T6 or T62. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 2696:2005	Aerospace series. Aluminium alloy AL-P7075-T6 or T62. Sheet and strip. 0,4 mm ≤a ≤6 mm
BS EN 2702:2005	Aerospace series. Aluminium alloy. AL-P6061. T6 or T62. Drawn or extruded bar and section. a or D ≤ 200 mm
BS EN 2703:2005	Aluminium alloy AL-P2024-T4 or T42. Clad sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 2802:2005	Aluminium alloy AL-P7475-T761. Sheet and strip. 0,6 mm ≤ a ≤ 6 mm
BS EN 2803:2005	Aerospace series. Aluminium alloy AL-P7475-T761. Clad sheet and strip. 1,0 mm ≤ a ≤ 6 mm
BS EN 3115:2009	Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ≤ 10 mm
BS EN 3332:2005	Aerospace series. Aluminium alloy AL-P7475-T762. Clad sheet and strip. 1,0 mm ≤ a ≤ 6 mm
BS EN 3333:2005	Aluminium alloy AL-P7475-T762. Sheet and strip. 0,6 mm ≤ a ≤ 6 mm
BS EN 3335:2005	Aluminium alloy AL-P7475-O2. Sheet for superplastic forming (SPF). 0,8 mm ≤ a ≤ 6 mm
BS EN 3338:2005	Aerospace series. Aluminim alloy AL-P7050. T74511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 3339:2006	Aerospace series. Aluminium alloy AL-P7010-T76. Die Forgings. a ≤ 200 mm
BS EN 3341:2005	Aluminium alloy AL-P6061-T4 or T42. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 3342:2005	Aerospace series. Aluminim alloy AL-P6061. T4 or T42. Drawn or extruded bar and section. a or D ≤ 150 mm
BS EN 3344:2005	Aerospace series. Aluminim alloy AL-P7050. T76511. Extruded bar and section. a or D $3l 150 mm with peripheral coarse grain control
BS EN 3347:2005	Aerospace series. Aluminim alloy AL-P2024. T8511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 3474:2005	Aerospace series. Aluminium alloy AL-P2024-T81. Sheet and strip. 0,25 mm $3l a ≤ 6 mm
BS EN 3552:2005	Aerospace series. Aluminium alloy AL-P2618A-T6 or T62. Clad sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 3553:2004	Aerospace series. Aluminium alloy AL-P2618A-T6511. Extruded bar and section. a or D ≤ 160 mm
BS EN 3719:2005	Aerospace series. Aluminium or aluminium alloy conductors for electrical cables. Product standard
BS EN 3872:2005	Aerospace series. Aluminium alloy AL-R39002-H112. Die forgings. a ≤ 200mm
BS EN 3979:2005	Aerospace series. Aluminium alloy AL-P8090-O2. Sheet for superplastic forming (SPF). 0,8 mm ≤ a ≤ 6 mm
BS EN 3997:2007	Aerospace series. Aluminium alloy AL-P2024-T3. Sheet and strip 0,4 mm $3Q a $3Q 6 mm
BS EN 3998:2007	Aerospace series. Aluminium alloy AL-P2024-T4 or T42. Sheet and strip. 0,3 mm ≤ a ≤ 6 mm
BS EN 3999:2007	Aerospace series. Aluminium alloy AL-P2024-T351. Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm
BS EN 4001:2007	Aerospace series. Aluminium alloy AL-P2024-T351. Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm
BS EN 4002:2007	Aerospace series. Aluminium alloy AL-P2219-T81. Sheet and strip 0,5 mm ≤ a ≤ 6 mm
BS EN 4003:2006	Aerospace series. Aluminium alloy AL-P2219-T87. Sheet and strip 0,5 mm ≤ a ≤ 6 mm
BS EN 4004:2007	Aerospace series. Aluminium alloy AL-P3103-H16. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 4005:2007	Aerospace series. Aluminium alloy AL-P5052-O. Sheet and strip 0,3 mm ≤ a ≤ 6 mm
BS EN 4006:2007	Aerospace series. Aluminium alloy AL-P6082-T4 or T42. Sheet and strip 0,4 mm ≤ a ≤ 6 mm
BS EN 4007:2005	Aerospace series. Aluminium alloy AL-P6082-T6 or T62. Sheet and strip. 0,4 mm ≤ a ≤ 6 mm
BS EN 4099:2005	Aerospace series. Aluminium alloy AL-P2219-T6 or T62. Clad sheet and strip. 0,5 mm ≤ a ≤ 6 mm
BS EN 4100:2005	Aerospace series. Aluminium alloy AL-P2219-T6 or T62. Sheet and strip. 0,5 mm ≤ a ≤ 6 mm
BS EN 4101:2005	Aerospace series. Aluminium alloy AL-P2024-T4. Sheet and strip with improved stretch forming capability. 0,4 mm ≤ a ≤ 6 mm
BS EN 4102:2005	Aerospace series. Aluminium alloy AL-P2219-T81. Clad sheet and strip. 0,5 mm ≤a ≤6 mm
BS EN 4202:2005	Aerospace series. Aluminium alloy AL-P6082-T651. Plate. 6 mm
BS EN 4203:2005	Aerospace series. Aluminium alloy AL-P8090-T89. Sheet. 0,6 mm ≤ a ≤ 6 mm
BS EN 4204:2005	Aerospace series. Aluminium alloy AL-P8090. T841. Sheet. 0 6 mm ≤ a ≤ 6 mm
BS EN 4209:2005	Aerospace series. Aluminium alloy AL-P2219-T851. Plate. 6 mm
BS EN 4211:2005	Aerospace series. Aluminium alloy AL-P2024-T42. Clad plate 6mm < a ≤ 25mm
BS EN 4212:2005	Aerospace series. Aluminium alloy AL-P5086-H111. Plate. 6mm < a ≤8 0mm
BS EN 4213:2005	Aerospace series. Aluminium alloy AL-P6061-T651. Plate. 6mm
BS EN 4214:2005	Aerospace series. Aluminium alloy AL-P7010-T651. Plate. 6 mm
BS EN 4215:2005	Aerospace series. Aluminium alloy AL-P7175-T651. Plate. 6 mm
BS EN 4247:2005	Aerospace series. Aluminium alloy AL-P2024-T42. Plate. 6 mm
BS EN 4283:2005	Aerospace series. Aluminium alloy AL-P2219-T87. Plate. 6 mm < a ≤ 40 mm
BS EN 4286:2005	Aerospace series. Aluminium alloy AL-P8090-T89. Die forgings. a ≤ 125 mm
BS EN 4287:2005	Aerospace series. Aluminium alloy AL-P7010. Forging stock
BS EN 4291:2005	Aerospace series. Aluminium alloy AL-P8090. Forging stock
BS EN 4292:2005	Aerospace series. Aluminium alloy AL-R39002. Forging stock
BS EN 4313:2005	Aerospace series. Aluminium aloy AL-P6013-T6. Sheet and strip. 0,5 mm ≤a ≤6 mm
BS EN 4324:2002	Aerospace series. Aluminium alloy AL-W42201. Filler metal for welding. Rod
BS EN 4341:2001	Aerospace series. Aluminium alloy AL-W46431. Filler metal for welding. Wire and rod
BS EN 4449:2005	Aluminium alloy AL-P7050. T76. Sheet. 0,8 mm ≤ a ≤ 6 mm
BS EN 4450:2005	Aerospace series. Aluminium alloy AL-P7050-T762. Sheet. 0, 8 mm ≤a ≤6 mm
BS L 102:1971	Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 103:1971	Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0 8)
BS L 105:1971	Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 109:1971	Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
BS L 110:1971	Specification for aluminium-coated sheet and strip of aluminium-copper-magnesium-manganese alloy (supplied for solution treatment by the user) (Cu 4.4, Mg 1.5, Mn 0.6)
BS L 111:1971	Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0. 7)
BS L 112:1971	Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0. 7)
BS L 113:1971	Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0. 7)
BS L 115:1971	Specification for plate of aluminium-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (not exceeding 25 mm thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
BS L 119:1975	Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimon alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2)
BS L 154:1977	Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1)
BS L 155:1977	Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1)
BS L 156:1978	Specification for sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0 8)
BS L 157:1978	Specification for sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 158:1978	Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0 8)
BS L 159:1978	Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 160:1976	Specification. Bars and extruded sections of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
BS L 161:1976	Specification. Hand and die forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
BS L 162:1976	Specification. Cold compressed hand forgings of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)
BS L 163:1978	Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 164:1978	Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0 8)
BS L 165:1978	Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 166:1978	Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 167:1978	Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
BS L 168:1978	Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
BS L 169:1986	Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and artificially aged) (Si 7, Mg 0.6)
BS L 170:1989	Specification for extruded bars and sections of aluminium-zinc-copper-chromium alloy (solution treated, controlled stretched and artificially aged) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.23) (7075)
BS L 171:1990	Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (supplied as-forged or annealed for subsequent heat treatment) (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
BS L 172:1989	Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
BS L 173:1991	Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)
BS L 174:1991	Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition)

IHS, formerly known as Technical Indexes, is one of the foremost providers of standards, regulatory, product and supplier information to industries worldwide including construction, health & safety, engineering, education, rail, energy, automotive, defence and many more. With over 45 years experience and more than 6000 customers based in the UK alone, IHS is the only company of its type providing access to several million pages of vital information.

The British Standard Service provided by IHS focuses on supplying you an established, authoritative, reliable and comprehensive information source.