| BS 2B 21:1933 | Specification for aircraft material. White metal (88/8/4) ingots (suitable for bearings) |
| BS 2B 27:2002 | Copper-zinc-aluminium-nickel-silicon alloy tube |
| BS 2B 8:1930 | Specification for aircraft material. Phosphor bronze castings for bearings (including solid and cored sticks) |
| BS 2F 66:1982 | Specification for rubber bonded cork sheets |
| BS 2HC 203:1989 | Specification for nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 13.0, Al 6.0, Mo 4.5, Nb 2.3) |
| BS 2HC 208:1989 | Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantal um alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5) |
| BS 2HC 209:1989 | Specification for low carbon, precipitation hardening nickel-chromium-aluminium-molybdenum-niobium alloy castings (Nickel base Cr 11.5, Al 6.0, Mo 4.0, Nb 2.0) |
| BS 2HC 210:1989 | Specification for nickel-tungsten-aluminium-chromium-molybdenum alloy castings (Nickel base W 10.5, Al 6.0, Cr 6.0, Mo 2.0) |
| BS 2HR 1:1973 | Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 2.2, Al 1.4) |
| BS 2HR 201:1974 | Specification for nickel-chromium-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 2.2, Al 1.4) |
| BS 2HR 202:1973 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 2:1973 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 501:1973 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1. 5) |
| BS 2HR 502:1973 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 503:1973 | Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for thread inserts (0.45 mm to 2 mm diameter) (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) |
| BS 2HR 504:1973 | Specification for nickel-chromium-titanium heat-resisting alloy bar, wire and rivets (nickel base, Cr 19.5, Ti 0.4) |
| BS 2L 126:1970 | Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6) |
| BS 2L 127:1970 | Specification for ingots and castings of magnesium-zinc-zirconium alloy (precipitation treated) (Zn 4.5, Zr 0.7) |
| BS 2L 128:1970 | Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated) (Zn 4. 5, rare earth metals 1.2, Zr 0.7) |
| BS 2L 500:1973 | Procedure for inspection and testing of wrought magnesium-base alloys |
| BS 2L 504:1973 | Specification for sheet and strip of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6) |
| BS 2L 505:1973 | Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6) |
| BS 2L 508:1973 | Specification for bars and extruded sections of magnesium-1 1/4% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diameter or minor sectional dimension) (Zn 1.25, Zr 0.6) |
| BS 2L 509:1973 | Specification for tube of magnesium-1 1/4% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6) |
| BS 2V 35:1966 | Specification for plywood for aeronautical purposes |
| BS 2V 37:1968 | Specification for Sitka spruce as finished timber |
| BS 3HR 601:1989 | Specification for nickel-chromium-titanium-aluminium heat-resisting alloy bar and wire for the manufacture of fasteners (maximum diameter or minor sectional dimension 30 mm) (nickel base Cr 19.5, Ti 2.2, Al 1.4) |
| BS 3J 12:1991 | Specification for pressure-sensitive adhesive identification tape |
| BS 3L 122:1970 | Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3) |
| BS 3L 124:1970 | Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated) (Al 10, Zn 0.5, Mn 0.3) |
| BS 3L 125:1970 | Specification for ingots and castings of magnesium - 10% aluminium-zinc-manganese alloy (solution treated and precipitation treated) (Al 10, Zn 0.5, Mn 0.3) |
| BS 3V 4:1929 | Specification for aircraft material. Ash |
| BS 4J 11:1991 | Specification for pressure-sensitive adhesive paper masking tape |
| BS 5V 7:1952 | Specification for mahogany for use in airscrews |
| BS 6V 3:1943 | Specification for aircraft material. High strength plywood for aircraft |
| BS B 100:1992 | Procedure for inspection, testing and acceptance of wrought copper alloys |
| BS B 23:1991 | Specification for copper-aluminium-nickel-iron alloy rods, sections, forging stock and forgings |
| BS B 24:1991 | Specification for copper-tin-phosphorous alloy rods and sections |
| BS B 25:1991 | Specification for copper-nickel-silicon alloy rods, sections, forging stock and forgings (heat treated) |
| BS B 26:1991 | Specification for copper-nickel-silicon alloy rods and sections (cold worked and heat treated) |
| BS B 27:1991 | Specification for copper-zinc-aluminium-nickel-silicon alloy tube |
| BS B 28:1991 | Specification for copper-beryllium alloy strip, foil and parts (solution treated (W) and precipitated) |
| BS B 29:1991 | Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: quarter hard (W(1/4H)) and precipitated) |
| BS B 30:1991 | Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: half hard (W(1/2H)) and precipitated) |
| BS B 31:1991 | Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard (W(H)) and precipitated) |
| BS B 32:1991 | Specification for copper-beryllium alloy rods, sections and parts (solution treated (W) and precipitated) |
| BS B 33:1991 | Specification for copper-beryllium alloy wire and springs (solution treated (W) and precipitated) |
| BS EN 2076-1:1991 | Aluminium and magnesium alloy ingots and castings. Technical specification. General requirements |
| BS EN 2076-2:1991 | Aluminium and magnesium alloy ingots and castings. Technical specification. Ingots for remelting |
| BS EN 2076-3:1991 | Aluminium and magnesium alloy ingots and castings. Technical specification. Pre-production and production castings |
| BS EN 2103-1:1992 | Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. General requirements |
| BS EN 2103-2:1991 | Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Remelting stock |
| BS EN 2103-3:1992 | Steel, nickel base and cobalt base alloy remelting stock and castings. Technical specification. Pre-production and production castings |
| BS EN 2310:1991 | Test methods for the flame resistance rating of non-metallic materials |
| BS EN 3671:2007 | Aerospace series. Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb). Non heat treated. Forging stock. a or D ≤ 250 mm |
| BS EN 3917:1998 | Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Powder or paste |
| BS EN 3918:1998 | Nickel base alloy NI-B41201 (NiCr14Si5B3C). Filler metal for brazing. Tape |
| BS EN 3919:1998 | Nickel base alloy NI-B41202 (NiCr14Si5B3). Filler metal for brazing. Amorphous foil |
| BS EN 3922:1998 | Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Borided foil |
| BS EN 3924:1998 | Nickel base alloy NI-B41203 (NiCr7Si5B3). Filler metal for brazing. Tape |
| BS EN 3928:1998 | Nickel base alloy NI-B40001 (NiSi5B3). Filler metal for brazing. Tape |
| BS EN 3931:1998 | Nickel base alloy NI-B31001 (NiCr19Si10). Filler metal for brazing. Tape |
| BS EN 3940:1998 | Nickel base alloy NI-B46001 (NiCo20Si5B3). Filler metal for brazing. Tape |
| BS EN 3944:1998 | Nickel base alloy NI-B41204 (NiCr13Si4B3). Filler metal for brazing. Tape |
| BS EN 3947:1998 | Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Rolled foil |
| BS EN 3948:1998 | Nickel base alloy NI-B15701 (NiPd34Au30). Filler metal for brazing. Wire |
| BS EN 4105:1998 | Nickel base alloy NI-B40002 (NiSi4B2). Filler metal for brazing. Tape |
| BS EN 4327:2001 | Aerospace series. Heat resisting alloy CO-WH1401 (CoCr26Ni11W8). Filler metal for welding. Wire and rod |
| BS EN 4383:2006 | Aerospace series. Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3). Non heat treated. Remelting stock |
| BS HC 202:1973 | Specification for precipitation hardening nickel base chromium-niobium-molybdenum-iron-tungsten alloy castings (Cr 20.0, Nb 6.6, Mo 6.0, Fe 3.0, W 2.5) |
| BS HC 205:1974 | Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy castings (Cr 20, Co 20, Mo 6, Ti 2) |
| BS HC 206:1975 | Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2) |
| BS HC 301:1973 | Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5) |
| BS HC 502:1981 | Specification for copper base aluminium-nickel-iron alloy castings (620 MPa) (Al 9.5, Ni 5, Fe 5) |
| BS HR 10:1972 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 203:1972 | Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4) |
| BS HR 204:1972 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base Cr 22, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS HR 205:1989 | Nickel-copper alloy sheet and strip: annealed (Nickel base, Cu 31) |
| BS HR 206:1973 | Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5) |
| BS HR 207:1973 | Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder) |
| BS HR 208:1989 | Specification for nickel-chromium-iron alloy sheet, strip and plate: annealed (Nickel base, Cr 15.5, Fe 8) |
| BS HR 209:1989 | Specification for nickel-chromium-cobalt-molybdenum-titanium-aluminium heat-resisting alloy sheet, strip and plate: softened (nickel base, Cr 18, Co 14, Mo 7, Ti 2.2, Al 2.1) |
| BS HR 240:1972 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (cobalt base Cr 20, W 15, Ni 10, Mn 1.5) |
| BS HR 3:1972 | Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14. 8, Mo 5, Al 4.7, Ti 1.2) |
| BS HR 40:1972 | Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base, Cr 20, W 15, Ni 10, Mn 1. 5) |
| BS HR 4:1972 | Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14. 2, Al 5, Mo 4, Ti 4) |
| BS HR 505:1981 | Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire for thread inserts (maximum diameter 2 mm) (nickel base, Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70) |
| BS HR 506:1989 | Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire: softened (Nickel base, Cr 19.5, Co 18, Ti 2.5, Al 1.5) |
| BS HR 5:1972 | Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0. 4) |
| BS HR 6:1972 | Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6) |
| BS L 512:1973 | Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding 150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0) |
| BS L 513:1973 | Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al 6.0, Zn 1.0) |
| BS L 514:1973 | Specification for forging stock and forgings of magnesium-3% zinc-zirconium alloy (Zn 3.0, Zr 0.6) |
| BS L 515:1973 | Specification for sheet and strip of magnesium-1 1/4% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (Zn 1.25, Zr 0.6) |
| BS M 22:1949 | Specification for silica gel acid activated for aircraft purposes |
| BS V 38:1967 | Specification for Sitka spruce as rough timber |
