| BS 2TA 100:1973 | Procedure for inspection and testing of wrought titanium and titanium alloys |
| BS 2TA 10:1974 | Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa) |
| BS 2TA 11:1974 | Specification for bar and section for machining of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 12:1974 | Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 13:1974 | Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength 900-1160 MPa) (limiting ruling section 150 mm) |
| BS 2TA 1:1974 | Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa) |
| BS 2TA 21:1973 | Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa) |
| BS 2TA 22:1973 | Specification for bar and section for machining of titanium-copper alloy (tensile strength 540-770 N/mm˛) |
| BS 2TA 23:1973 | Specification for forging stock of titanium-copper alloy (tensile strength 540-770 N/mm˛) |
| BS 2TA 24:1973 | Specification for forgings of titanium-copper alloy (tensile strength 540-770 N/mm˛) |
| BS 2TA 28:1974 | Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm) (primarily intended for the manufacture of fasteners complying with the requirements of the 'A' series of British Standards) |
| BS 2TA 2:1973 | Specification for sheet and strip of commercially pure titanium (tensile strength 390-540 N/mm˛) |
| BS 2TA 3:1973 | Specification for bar and section for machining of commercially pure titanium (tensile strength 390-540 N/mm˛) |
| BS 2TA 4:1973 | Specification for forging stock of commercially pure titanium (tensile strength 390-540 N/mm˛) |
| BS 2TA 5:1973 | Specification for forgings of commercially pure titanium (tensile strength 390-540 N/mm˛) |
| BS 2TA 6:1973 | Specification for sheet and strip of commercially pure titanium (tensile strength 570-730 N/mm˛) |
| BS 2TA 7:1973 | Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 N/mm˛) |
| BS 2TA 8:1973 | Specification for forging stock of commercially pure titanium (tensile strength 540-740 N/mm˛) |
| BS 2TA 9:1973 | Specification for forgings of commercially pure titanium (tensile strength 540-740 N/mm˛) |
| BS EN 2003-009:2007 | Aerospace series. Test methods. Titanium and titanium alloys. Determination of surface contamination |
| BS EN 2003-010:2007 | Aerospace series. Titanium and titanium alloys. Test methods. Sampling for determination of hydrogen content |
| BS EN 2338:2001 | Aerospace series. Sheets, hot rolled in titanium and titanium alloys. Thickness 0,8 mm ≤ a ≤ 6 mm. Dimensions |
| BS EN 2339:2001 | Aerospace series. Sheets, cold rolled in titanium and titanium alloys. Thickness 0,2 mm ≤ a ≤ 6 mm. Dimensions |
| BS EN 2545-1:1995 | Titanium and titanium alloy remelting stock and castings. Technical specification. General requirements |
| BS EN 2545-2:1995 | Titanium and titanium alloy remeling stock and castings. Technical specification. Remelting stock |
| BS EN 2545-3:1995 | Titanium and titanium alloy remelting stock and castings. Technical specification. Pre-production and production castings |
| BS EN 2617:2001 | Aerospace Series. Plates in titanium and titanium alloys. Thickness 6 mm < a ≤ 100 mm. Dimensions |
| BS EN 2858-1:1994 | Titanium and titanium alloys. Forging stock and forgings. Technical specifications. General requirements |
| BS EN 2858-2:1994 | Titanium and titanium alloys. Forging stock and forgings. Technical specification. Forging stock |
| BS EN 2858-3:1994 | Titanium and titanium alloys. Forging stock and forgings. Technical specifications. Pre-production and production forgings |
| BS EN 2955:1993 | Recycling of titanium and titanium alloy scrap |
| BS EN 3114-001:2006 | Aerospace series. Test method. Microstructure of (alpha + beta) titanium alloy wrought products. General requirements |
| BS EN 3114-002:2007 | Aerospace series. Test method. Microstructure of (alpha + beta) titanium alloy wrought products. Microstructure of bars, sections, forging stock and forgings |
| BS EN 3114-003:2006 | Aerospace series. Test method. Microstructure of (alpha + beta) titanium alloy wrought products. Microstructure of plate |
| BS EN 3114-004:2006 | Aerospace series. Test method. Microstructure of (alpha + beta) titanium alloy wrought products. Microstructure of sheet for superplastic forming |
| BS EN 3683:2007 | Aerospace series. Test methods. Titanium alloy wrought products. Determination of primary alpha content. Point count method and line intercept method |
| BS EN 3684:2007 | Aerospace series. Test methods. Titanium alloy wrought products. Determination of beta transus temperature. Metallographic method |
| BS EN 3688:2001 | Aerospace series. T-ring fillers in titanium alloy for welded pipes. 14000 kPa nominal pressure |
| BS EN 3892:2001 | Aerospace series. Titanium alloy TI-W64001. Filler metal for welding |
| BS EN 3893:2001 | Aerospace series. Titanium alloy TI-W19001. Filler metal for welding |
| BS EN 3965:2001 | Aerospace series. Titanium alloy TI-B17001. Filler metal for brazing. Rolled foil |
| BS EN 3976:2006 | Aerospace series. Titanium and titanium alloys. Test method. Chemical analysis for the determination of hydrogen content |
| BS EN 4058:2001 | Aerospace series. Filler rods and filler wires for welding in titanium and titanium alloys. Diameter 0,5 mm ≤ D ≤ 5,0 mm. Dimensions |
| BS EN 4104:2001 | Aerospace series. Nickel base alloy NI-B40002. Filler metal for brazing. Powder or paste |
| BS EN 4267:2001 | Aerospace series. Round bar in titanium and titanium alloys. Diameter 6 mm ≤ D ≤ 160 mm. Dimensions |
| BS EN 4342:2001 | Aerospace series. Titanium TI-W99001. Filler metal for welding. Wire and rod |
| BS TA 38:1971 | Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm˛) (limiting ruling section 25 mm) |
| BS TA 39:1971 | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 N/mm˛) (limiting ruling section 25 mm) |
| BS TA 40:1971 | Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm˛) (limiting ruling section over 25 mm up to and including 75 mm) |
| BS TA 41:1971 | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm˛) (limiting ruling section over 25 mm up to and including 75 mm) |
| BS TA 42:1971 | Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mm˛) (limiting ruling section over 25 mm up to and including 75 mm) |
| BS TA 43:1972 | Specification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm˛) (limiting ruling section 65 mm) |
| BS TA 44:1972 | Specification for forgings of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm˛) (limiting ruling section 65 mm) |
| BS TA 45:1973 | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 N/mm˛) (limiting ruling section 25 mm) |
| BS TA 46:1973 | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm˛) (limiting ruling section over 25 mm up to and including 100 mm) |
| BS TA 47:1973 | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 N/mm˛) (limiting ruling section 100 mm) |
| BS TA 48:1973 | Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1200 N/mm˛) (limiting ruling section 100 mm) |
| BS TA 49:1973 | Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm˛) (limiting ruling section over 100 mm up to and including 150 mm) |
| BS TA 50:1973 | Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm˛) (limiting ruling section over 100 mm up to and including 150 mm) |
| BS TA 51:1973 | Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mm˛) (limiting ruling section over 100 mm up to and including 150 mm) |
| BS TA 52:1973 | Specification for sheet and strip of titanium-copper alloy (tensile strength 690-920 N/mm˛) |
| BS TA 53:1973 | Specification for bar and section for machining of titanium-copper alloy (tensile strength 650-880 N/mm˛) (limiting ruling section 75 mm) |
| BS TA 54:1973 | Specification for forging stock of titanium-copper alloy (tensile strength 650-880 N/mm˛) (limiting ruling section 75 mm) |
| BS TA 55:1973 | Specification for forgings of titanium-copper alloy (tensile strength 650-880 N/mm˛) (limiting ruling section 75 mm) |
| BS TA 56:1974 | Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa) (maximum thickness 100 mm) |
| BS TA 57:1974 | Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (maximum thickness 65 mm) |
| BS TA 58:1974 | Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm) |
| BS TA 59:1980 | Specification for sheet and strip of titanium-aluminium-vanadium alloy (tensile strength 920 MPa to 1180 MPa) |
