| BS 4981:1984 | Specification for Mondopoint footwear sizing and marking system |
| BS 5131-0:1990 | Methods of test for footwear and footwear materials. General introduction |
| BS 5131-1.1:1991 | Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to heat (creep test) |
| BS 5131-1.2:1991 | Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to peeling |
| BS 5131-1.3:1991 | Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests |
| BS 5131-1.4:1979 | Methods of test for footwear and footwear materials. Adhesives. Heat activation life of adhesives |
| BS 5131-1.6:1979 | Methods of test for footwear and footwear materials. Adhesives. Recommended environmental storage conditions for adhesive joints prior to heat resistance or peeling tests |
| BS 5131-1.7:1991 | Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests |
| BS 5131-1.8:1981 | Methods of test for footwear and footwear materials. Adhesives. Rate of bond strength development in shear of hot melt adhesives for lasting |
| BS 5131-1.9:1985 | Methods of test for footwear and footwear materials. Adhesives. Measurement of green strength of adhesive joints |
| BS 5131-2.10:1991 | Methods of test for footwear and footwear materials. Solings. Heat shrinkage of cellular solings |
| BS 5131-2.11:1983 | Methods of test for footwear and footwear materials. Solings. Resistance of solings to short-term contact with a hot surface |
| BS 5131-2.1:1991 | Methods of test for footwear and footwear materials. Solings. Ross flexing method for cut growth resistance of soling materials |
| BS 5131-2.6:1979 | Methods of test for footwear and footwear materials. Solings. Split tear strength of cellular solings |
| BS 5131-2.7:1980 | Methods of test for footwear and footwear materials. Solings. The preparation of test pieces from soling materials for physical testing |
| BS 5131-3.1:1991 | Methods of test for footwear and footwear materials. Uppers, textiles and threads. Strength of upper materials and lining materials at right angles to stitch perforations |
| BS 5131-3.4:1978 | Methods of test for footwear and footwear materials. Uppers, textiles and threads. Edgewise compressibility, upper materials |
| BS 5131-3.5:1978 | Methods of test for footwear and footwear materials. Uppers, textiles and threads. The break/pipiness test |
| BS 5131-3.6:1991 | Methods of test for footwear and footwear materials. Uppers, textiles and threads. Abrasion resistance of shoe laces |
| BS 5131-3.7:1991 | Methods of test for footwear and footwear materials. Uppers, textiles and threads. Breaking strength of shoe laces |
| BS 5131-4.12:1990 | Methods of test for footwear and footwear materials. Other components. Fastness of fibreboard finishes to rubbing in the presence of water and perspiration |
| BS 5131-4.13:1976 | Methods of test for footwear and footwear materials. Other components. Transverse tensile strength of fibreboard |
| BS 5131-4.18:1985 | Methods of test for footwear and footwear materials. Other components. Longitudinal stiffness of steel shanks |
| BS 5131-4.1:1975 | Methods of test for footwear and footwear materials. Other components. Resistance to peeling of insole board |
| BS 5131-4.20:1985 | Methods of test for footwear and footwear materials. Other components. Force required to pull heel pins out of shoe heels |
| BS 5131-4.2:1990 | Methods of test for footwear and footwear materials. Other components. Flexing index of fibreboard |
| BS 5131-4.3:1990 | Methods of test for footwear and footwear materials. Other components. Resistance of fibre board to stitch-tear |
| BS 5131-4.4:1990 | Methods of test for footwear and footwear materials. Other components. Heel pin holding strength of fibreboard |
| BS 5131-4.5:1990 | Methods of test for footwear and footwear materials. Other components. Tensile strength of fibreboard |
| BS 5131-4.6:1975 | Methods of test for footwear and footwear materials. Other components. Shear strength of ribs stuck to insoles |
| BS 5131-4.7:1975 | Methods of test for footwear and footwear materials. Other components. Resistance to peeling of ribs stuck to insoles |
| BS 5131-4.8:1990 | Methods of test for footwear and footwear materials. Other components. Resistance of heels of ladies' shoes to lateral impact |
| BS 5131-4.9:1991 | Methods of test for footwear and footwear materials. Other components. Fatigue resistance of heels of ladies' shoes |
| BS 5131-5.11:1981 | Methods of test for footwear and footwear materials. Testing of complete footwear. Determination of the strength of buckle fastening assemblies |
| BS 5131-5.13:1980 | Methods of test for footwear and footwear materials. Testing of complete footwear. Measurement of the strength of stitched seams in upper and lining materials |
| BS 5131-5.1:1990 | Methods of test for footwear and footwear materials. Testing of complete footwear. Adhesion of stuck-on and moulded-on soles |
| BS 5131-5.2:1990 | Methods of test for footwear and footwear materials. Testing of complete footwear. Degree of vulcanization of moulded-on rubber soles |
| BS 5131-5.3:1990 | Methods of test for footwear and footwear materials. Testing of complete footwear. Resistance of complete footwear to heat |
| BS 5131-5.4:1978 | Methods of test for footwear and footwear materials. Testing of complete footwear. Sole bond peeling strength |
| BS 5131-5.5:1978 | Methods of test for footwear and footwear materials. Testing of complete footwear. Resistance of finished footwear to water penetration (trough test) |
| BS 5131-5.6:1991 | Methods of test for footwear and footwear materials. Testing of complete footwear. Impact test for rigid units and shoe bottoms |
| BS 5131-5.7:1978 | Methods of test for footwear and footwear materials. Testing of complete footwear. Fatigue test for rigid units and shoe bottoms |
| BS 5131-5.9:1979 | Methods of test for footwear and footwear materials. Testing of complete footwear. Strength of top piece attachment to shoe heels |
| BS 5131-6.1:1981 | Methods of test for footwear and footwear materials. Codes of practice. Code of practice for the comparative evaluation by wear trial of materials, components or constructions |
| BS 5131-6.2:1979 | Methods of test for footwear and footwear materials. Codes of practice. Code of practice for the identification in footwear wear trials of major weaknesses in design or construction and the assessment of fitness-for-purpose |
| BS 5462:Part 1:1984 | Footwear with midsole protection. Specification for lined vulcanized rubber footwear with penetration resistant midsoles |
| BS 5462:Part 2:1984 | Footwear with midsole protection. Specification for lined or unlined polyvinyl chloride (PVC) footwear with penetration resistant midsoles |
| BS 5833:1988 | Scheme for labelling of footwear |
| BS 5943:1980 | Methods for measurement and recording for orthopaedic footwear |
| BS 7141-6:1989 | Narrow fabrics. Specification for laces for footwear and other purposes |
| BS EN 12044:2005 | Footwear, leather and imitation leather goods manufacturing machines. Cutting and punching machines. Safety requirements |
| BS EN 12222:1997 | Footwear. Standard atmospheres for conditioning and testing of footwear and components for footwear |
| BS EN 12387:2005 | Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements |
| BS EN 12653:2000 | Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements |
| BS EN 12743:1999 | Footwear. Test methods for outsoles. Compression energy |
| BS EN 12744:1999 | Footwear. Test methods for insoles. Delamination resistance |
| BS EN 12745:1999 | Footwear. Test methods for insoles. Pin holding strength |
| BS EN 12746:2000 | Footwear. Test methods for insoles and insocks. Water absorption and desorption |
| BS EN 12747:1999 | Footwear. Test methods for insoles. Abrasion resistance |
| BS EN 12748:1999 | Footwear. Test methods for outsoles, insoles, linings and insocks. Water soluble content |
| BS EN 12749:1999 | Footwear. Ageing conditioning |
| BS EN 12770:2000 | Footwear. Test methods for outsoles. Abrasion resistance |
| BS EN 12771:2000 | Footwear. Test methods for outsoles. Tear strength |
| BS EN 12772:2000 | Footwear. Test methods for outsoles. Dimensional stability |
| BS EN 12773:2000 | Footwear. Test methods for outsoles. Needle tear strength |
| BS EN 12774:2000 | Footwear. Test methods for outsoles. Determination of split tear strength and delamination resistance |
| BS EN 12782:2000 | Footwear. Test methods for insoles. Resistance to stitch tear |
| BS EN 12784:2000 | Footwear. Test methods for the whole shoe. Thermal insulation |
| BS EN 12785:2000 | Footwear. Test methods for whole shoe. Heel attachment |
| BS EN 12800:2000 | Footwear. Test methods for insoles. Dimensional stability |
| BS EN 12801:2000 | Footwear. Test methods for insoles, lining and insocks. Perspiration resistance |
| BS EN 12803:2000 | Footwear. Test methods for outsoles. Tensile strength and elongation |
| BS EN 12826:2000 | Footwear. Test methods for lining and insocks. Static friction |
| BS EN 12940:2004 | Footwear manufacturing wastes. Waste classification and management |
| BS EN 12958:2000 | Footwear. Test methods for shanks. Fatigue resistance |
| BS EN 12959:2000 | Footwear. Test methods for shanks. Longitudinal stiffness |
| BS EN 12961:2001 | Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
| BS EN 12964:2001 | Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature |
| BS EN 13073:2001 | Footwear. Test methods for whole shoe. Water resistance |
| BS EN 13400:2002 | Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces |
| BS EN 13457:2004 | Footwear, leather and imitation leather goods manufacturing machines. Splitting, skiving, cutting, cementing and cement drying machines. Safety requirements |
| BS EN 13511:2002 | Footwear. Test methods for uppers. Resistance to damage on lasting |
| BS EN 13512:2002 | Footwear. Test methods for uppers and lining. Flex resistance |
| BS EN 13513:2002 | Footwear. Test methods for uppers. Deformability |
| BS EN 13514:2002 | Footwear. Test methods for uppers. Delamination resistance |
| BS EN 13515:2002 | Footwear. Test methods for uppers and lining. Water vapour permeability and absorption |
| BS EN 13516:2002 | Footwear. Test methods for uppers, lining and insocks. Colour fastness to rubbing |
| BS EN 13517:2002 | Footwear. Test methods for uppers, linings and insocks. Colour migration |
| BS EN 13518:2002 | Footwear. Test methods for uppers. Water resistance |
| BS EN 13519:2002 | Footwear. Test methods for uppers. High temperature behaviour |
| BS EN 13520:2002 | Footwear. Test methods for uppers, lining and insocks. Abrasion resistance |
| BS EN 13521:2002 | Footwear. Test methods for uppers, lining and insocks. Thermal insulation |
| BS EN 13522:2002 | Footwear. Test methods for uppers. Tensile strength and elongation |
| BS EN 13571:2002 | Footwear. Test methods for uppers, lining and insocks. Tear strength |
| BS EN 13572:2002 | Footwear. Test methods for uppers, lining and insocks. Seam strength |
| BS EN 13770:2002 | Textiles. Determination of the abrasion resistance of knitted footwear garments |
| BS EN 1391:1998 | Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification |
| BS EN 1392:1998 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Test methods for measuring the bond strength under specified conditions |
| BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
| BS EN 14294:2004 | Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes |
| BS EN 14602:2004 | Footwear. Test methods for the assessment of ecological criteria |
| BS EN 15307:2007 | Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
| BS EN 1845:1999 | Footwear manufacturing machines. Footwear moulding machines. Safety requirements |
| BS EN 522:1998 | Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification |
| BS EN 61340-4-3:2002* IEC 61340-4-3:2001 | Electrostatics. Standard test methods for specific applications. Footwear. Part 4-3: Footwear |
| BS EN ISO 17693:2005 | Footwear. Test methods for uppers. Resistance to damage on lasting |
| BS EN ISO 17695:2005 | Footwear. Test methods for uppers. Deformability |
| BS EN ISO 17700:2005 | Footwear. Test methods for uppers, linings and insocks. Colour fastness to rubbing |
| BS EN ISO 17707:2005 | Footwear. Test methods for outsoles. Flex resistance |
| BS EN ISO 17708:2003 | Footwear. Test methods for whole shoe. Upper sole adhesion |
| BS EN ISO 19952:2006 | Footwear. Vocabulary |
| BS EN ISO 19953:2004 | Footwear. Test methods for heels. Resistance to lateral impact |
| BS EN ISO 19954:2003 | Footwear. Test methods for whole shoe. Washability in a domestic washing machine |
| BS EN ISO 19956:2004 | Footwear. Test methods for heels. Fatigue resistance |
| BS EN ISO 19957:2004 | Footwear. Test methods for heels. Heel pin holding strength |
| BS EN ISO 19958:2004 | Footwear. Test methods for heels and top pieces. Top piece retention strength |
| BS EN ISO 20863:2004 | Footwear. Test method for stiffeners and toepuffs. Bondability |
| BS EN ISO 20864:2004 | Footwear. Test method for stiffeners and toepuffs. Mechanical characteristics |
| BS EN ISO 22774:2004 | Footwear. Test methods for accessories. Shoe laces. Abrasion resistance |
| BS EN ISO 22775:2004 | Footwear. Test methods for accessories. Metallic accessories. Corrosion resistance |
| BS EN ISO 22776:2004 | Footwear. Test method for accessories. Touch and close fasteners. Shear strength before and after repeated closing |
| BS EN ISO 22777:2004 | Footwear. Test method for accessories: touch and close fasteners. Peel strenght before and after repeated closingst method for accessories. Touch and close fasteners. Peel strength before and after repeated closing |
| BS EN ISO 5403:2002 | Leather. Physical and mechanical tests. Determination of water resistance of flexible leather |
| CWA 15043:2004 | Proposal for a XML-based format for storage and exchange of design data in the footwear industry |
| DD ENV 12940:1999 | Footwear manufacturing wastes. Waste classification and management |
| PD CEN ISO/TR 20572:2007 | Footwear. Performance requirements for components for footwear. Accessories |
| PD CEN ISO/TR 20879:2007 | Footwear. Performance requirements for components for footwear. Uppers |
| PD CEN ISO/TR 20880:2007 | Footwear. Performance requirements for components for footwear. Outsoles |
| PD CEN ISO/TR 20881:2007 | Footwear. Performance requirements for components for footwear. Insoles |
| PD CEN ISO/TR 20882:2007 | Footwear. Performance requirements for components for footwear. Lining and insocks |
| PD CEN ISO/TR 20883:2007 | Footwear. Performance requirements for components for footwear. Shanks |
| PD CEN ISO/TR 22648:2007 | Footwear. Performance requirements for components for footwear. Stiffeners and toepuffs |
| PD ISO/TR 20573:2006 | Footwear. Performance requirements for components for footwear. Heels and top pieces |
