| BS 1132:1987 | Specification for automatic pipettes |
| BS 1428-B2:1960 | Microchemical analysis. Apparatus for the determination of elements by other than combustion methods. Specification for ammonia distillation apparatus (Markham) |
| BS 1428-D1:1965 | Microchemical apparatus. Volumetric analysis. Specification for burettes with pressure-filling device and automatic zero |
| BS 1428-D4:1963* BS 797:1963 | Microchemical apparatus. Volumetric analysis. Specification for capillary pipettes |
| BS 1428-D5:1955 | Microchemical apparatus. Volumetric analysis. Specification for syringe pattern micro-pipette |
| BS 1583:1986 | Specification for one-mark pipettes |
| BS 1739:1982* ISO 6556:1981 | Specification for filter flasks |
| BS 1751:1997* ISO 4785:1997 | Laboratory glassware. Specification for straight-bore glass stopcocks for general purposes |
| BS 1752:1983* ISO 4793:1980 | Specification for laboratory sintered or fritted filters including porosity grading |
| BS 1792:1982* ISO 1042-1983 | Specification for one-mark volumetric flasks |
| BS 1797:1987 | Schedule for tables for use in the calibration of volumetric glassware |
| BS 2021:1980* ISO 4800-1977 | Specification for separating and dropping funnels for laboratory use |
| BS 2058:1961 | Specification for Lunge-Rey weighing pipette |
| BS 2069:1954 | Specification for gas sampling tubes |
| BS 2071:1989 | Specification for Soxhlet extractors |
| BS 2461:1983 | Specification for gas washing bottles |
| BS 2554:1987 | Specification for Westergren tubes and support for the measurement of erythrocyte sedimentation rate |
| BS 2598-3:1980* ISO 3587-1976 | Glass plant, pipeline and fittings. Specification for pipeline and fittings of nominal bore 15 to 150 mm: compatibility and interchangeability |
| BS 2598-4:1980* ISO 4704:1977 | Glass plant, pipeline and fittings. Specification for glass plant components |
| BS 2701:1956 | Specification for Rees-Hugill powder density flask |
| BS 2734:1984* ISO 1773-1976 | Specification for boiling flasks (narrow-necked), conical, flat bottom and round bottom |
| BS 2734:1997* ISO 1773:1997 | Specification for narrow-necked boiling flasks |
| BS 2735:1956 | Specification for iodine flasks |
| BS 2761:1983 | Specification for spherical ground joints |
| BS 2775:1987 | Specification for rubber stoppers and tubing for general laboratory use |
| BS 3218:1982 | Specification for test tubes and boiling tubes |
| BS 3423:1986 | Recommendations for design of glass vacuum vessels (including desiccators) for laboratory use |
| BS 3473-4.1:1989* ISO 4802-1:1988 | Chemical resistance of glass used in the production of laboratory glassware. Methods for determination of hydrolytic resistance of the interior surfaces of glass containers. Determination by titration method and classification |
| BS 3473-4.2:1989* ISO 4802-2:1988 | Chemical resistance of glass used in the production of laboratory glassware. Methods for determination of hydrolytic resistance of the interior surfaces of glass containers. Determination by flame photometry and classification |
| BS 3517:1991* ISO 718:1990 | Methods for thermal shock tests on laboratory glassware |
| BS 3996:1978 | Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels) |
| BS 5404-1:1976 | Specification for plastics laboratory ware. Beakers |
| BS 5404-2:1977 | Specification for plastics laboratory ware. Graduated measuring cylinders |
| BS 5404-3:1977 | Specification for plastics laboratory ware. Filter funnels |
| BS 5404-4:1979 | Specification for plastics laboratory ware. Wash bottles |
| BS 5522:1977* ISO 3889:1977 | Specification for milk and milk products. Determination of fat content. Mojonnier-type fat extraction flasks |
| BS 572:1985 | Specification for interchangeable conical ground glass joints |
| BS 5732:1985 | Specification for glass disposable Pasteur pipettes |
| BS 5895:1980* ISO 4803-1978 | Specification for borosilicate glass tubing for laboratory apparatus |
| BS 5898:1980* ISO 384-1978 | Specification for principles of design and construction of volumetric glassware for laboratory use |
| BS 5922:1980* ISO 4799-1978 | Specification for glass condensers for laboratory use |
| BS 5928:1980* ISO 4796-1977 | Specification for bottles for laboratory use |
| BS 6018:1991 | Method of test for accuracy and precision of mechanical handpipettes of capacity 0.05 mL and above |
| BS 604:1982* ISO 4788:1980 | Specification for graduated glass measuring cylinders |
| BS 611-2:1990 | Petri dishes. Specification for plastics Petri dishes for single use |
| BS 612:1966 | Specification for Nessler cylinders |
| BS 615:1953 | Specification for Kohlrausch flasks |
| BS 6352:1983* ISO 4797-1981 | Specification for flasks with ground glass joints |
| BS 6379-3:1983* ISO 6666-1983 | Sampling of coffee and coffee products. Specification for a coffee trier for sampling green coffee |
| BS 6523:1984 | Specification for glass beakers for laboratory use |
| BS 658:1989 | Specification for apparatus for the determination of distillation range (including flasks and receivers) |
| BS 6674:1985* ISO 7550-1985 | Specification for disposable micropipettes |
| BS 6696:1986* ISO 4787-1984 | Methods for use and testing of capacity of volumetric glassware |
| BS 6706:1986 | Specification for disposable glass serological pipettes |
| BS 6711-1:1986* ISO 4791-1:1985 | Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica. Names for items of apparatus |
| BS 675:1953 | Specification for sugar flasks |
| BS 676:1982 | Specification for flasks with graduated necks (phenols type) |
| BS 6898:1987 | Specification for glass centrifuge tubes for general laboratory use |
| BS 700-1:1982* ISO 835-1:1981 | Graduated pipettes. Specification for general requirements |
| BS 700-2:1982* ISO 835-2:1981 | Graduated pipettes. Specification for pipettes for which no waiting time is specified |
| BS 700-3:1982* ISO 835-4:1981 | Graduated pipettes. Specification for blow-out pipettes |
| BS 733-2:1987 | Pyknometers. Methods for calibration and use of pyknometers |
| BS 733:Part 1:1983* ISO 3507-1976 | Pyknometers. Specification |
| BS 748:1982 | Specification for haemacytometer and particle counting chambers |
| BS 7532:1991 | Method of test for accuracy and precision of mechanical handpipettes of capacity less than 50 muL down to and including 10 muL |
| BS 756:1952 | Specification for Dean and Stark apparatus |
| BS 7653-1:1993 | Piston and/or plunger operated volumetric apparatus. Glossary of terms |
| BS 7653-2:1993 | Piston and/or plunger operated volumetric apparatus. Methods of operation |
| BS 7653-3:1993 | Piston and/or plunger operated volumetric apparatus. Methods of test |
| BS 7653-4:1993 | Piston and/or plunger operated volumetric apparatus. Specification for conditions of test, safety and supply |
| BS 7709-1:1993* ISO 10136-1:1993 | Analysis of extract solutions of glass. Method for determination of silicon dioxide by molecular absorption spectrometry |
| BS 7709-2:1993* ISO 10136-2:1993 | Analysis of extract solutions of glass. Method for determination of sodium oxide and potassium oxide by flame spectrometric methods |
| BS 7709-3:1993* ISO 10136-3:1993 | Analysis of extract solutions of glass. Method for determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry |
| BS 7709-4:1993* ISO 10136-4:1993 | Analysis of extract solutions of glass. Method for determination of aluminium oxide by molecular absorption spectrometry |
| BS 7709-5:1993* ISO 10136-5:1993 | Analysis of extract solutions of glass. Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry |
| BS 7709-6:1993* ISO 10136-6:1993 | Analysis of extract solutions of glass. Method for determination of boron (III) oxide by molecular absorption spectrometry |
| BS 846:1985 | Specification for burettes |
| BS EN 61010-031:2002* IEC 61010-031:2002 | Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and test |
| BS EN 61010-1:1993 | Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements |
| BS EN 61010-1:2001* IEC 61010-1:2001 | Safety requirements for electrical equipment for measurement, control and laboratory use. General requirements |
| BS EN 61010-2-010:1995* IEC 61010-2-010:1992 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of materials |
| BS EN 61010-2-010:2003 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of material |
| BS EN 61010-2-031:1995* IEC 61010-2-031:1993 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held probe assemblies for electrical measurement and test |
| BS EN 61010-2-032:1995* IEC 61010-2-032:1994 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for hand-held current clamps for electrical measurement and test |
| BS EN 61010-2-041:1997* IEC 61010-2-041:1995 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes |
| BS EN 61010-2-042:1997* IEC 61010-2-042:1997 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes |
| BS EN 61010-2-043:1998* IEC 61010-2-043:1997 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory processes |
| BS EN 61010-2-045:2001 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields |
| BS EN 61010-2-051:1996* IEC 61010-2-051:1995 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mechanical mixing and stirring |
| BS EN 61010-2-051:2003 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring |
| BS EN 61010-2-061:1996* IEC 61010-2-061:1995 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization |
| BS EN 61010-2-061:2003 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization |
| BS EN 61010-2-081:2002 | Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
| BS EN ISO 1042:2000 | Laboratory glassware. One-mark volumetric flasks |
| BS EN ISO 24450:2005 | Laboratory glassware. Wide-necked boiling flasks |
| BS EN ISO 385:2005 | Laboratory glassware. Burettes |
| BS EN ISO 4142:2002 | Laboratory glassware. Test tubes |
| BS EN ISO 4788:2005 | Laboratory glassware. Graduated measuring cylinders |
| BS EN ISO 4796-1:2001 | Laboratory glassware. Bottles. Screw-neck bottles |
| BS EN ISO 4796-2:2001 | Laboratory glassware. Bottles. Conical neck bottles |
| BS EN ISO 4796-3:2001 | Laboratory glassware. Bottles. Aspirator bottles |
| BS EN ISO 4797:2004 | Laboratory glassware. Boiling flasks with conical ground joints |
| BS EN ISO 6145-1:2008 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration |
| BS EN ISO 6414:1995 | Technical drawings for glassware |
| BS EN ISO 835:2007 | Laboratory glassware. Graduated pipettes |
| BS EN ISO 8655-3:2002 | Piston-operated volumetric apparatus. Piston burettes |
| BS EN ISO 8655-4:2002 | Piston-operated volumetric apparatus. Dilutors |
| BS EN ISO 8655-5:2002 | Piston-operated volumetric apparatus. Dispensers |
| BS EN ISO 8655-6:2002 | Piston-operated volumetric apparatus. Gravimetric methods for the determination of measurement error |
| BS IEC 61010-3-010:1999 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials |
| BS IEC 61010-3-020:1999 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-020:1992, particular requirements for laboratory centrifuges |
| BS ISO 12771:1997 | Plastics laboratory ware. Disposable serological pipettes |
| BS ISO 12772:1997 | Laboratory glassware. Disposable microhaematocrit capillary tubes |
| BS ISO 3507:1999 | Laboratory glassware. Pyknometers |
| BS ISO 3889:2006 | Milk and milk products. Specification of Mojonnier-type fat extraction flasks |
| BS ISO 4795:1996 | Laboratory glassware. Glass for thermometer bulbs |
| BS ISO 4798:1997 | Laboratory glassware. Filter funnels |
| BS ISO 4800:1998 | Laboratory glassware. Separating funnels and dropping funnels |
| PD IEC TR 61010-3-032:2002 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-032:1994. Particular requirements for hand-held current clamps for electrical measurement and test |
| PD IEC TR 61010-3-043:2002 | Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-043:1997. Particular requirements for dry heat sterilizers using either hot air or hot inert gas for treatment of medical materials and for laboratory processes |
| PD ISO/TR 20461:2001 | Determination of uncertainty for volume measurements made using the gravimetric method |
