| BS 4140-0:1986 | Methods of test for aluminium oxide. General introduction |
| BS 4140-10:1986* ISO 903-1976 | Methods of test for aluminium oxide. Determination of untamped density |
| BS 4140-11:1986* ISO 1617-1976 | Methods of test for aluminium oxide. Determination of sodium content |
| BS 4140-12:1986* ISO 1618-1976 | Methods of test for aluminium oxide. Determination of vanadium content |
| BS 4140-13:1986* ISO 2073-1976 | Methods of test for aluminium oxide. Preparation of sample solution by treatment with hydrochloric acid under pressure |
| BS 4140-14:1997* ISO 2070:1997 | Methods of test for aluminium oxide. Determination of calcium content |
| BS 4140-16:1986* ISO 2071-1976 | Methods of test for aluminium oxide. Determination of zinc content by flame atomic absorption |
| BS 4140-17:1986* ISO 2828-1973 | Methods of test for aluminium oxide. Determination of fluorine content |
| BS 4140-18:1986* ISO 2829-1973 | Methods of test for aluminium oxide. Determination of phosphorus content |
| BS 4140-19:1986* ISO 2865-1973 | Methods of test for aluminium oxide. Determination of boron content |
| BS 4140-1:1986* ISO 802-1976 | Methods of test for aluminium oxide. Preparation and storage of test samples |
| BS 4140-20:1980* ISO 2927-1973 | Methods of test for aluminium oxide. Sampling |
| BS 4140-21:1980* ISO 2926-1974 | Methods of test for aluminium oxide. Particle size analysis |
| BS 4140-22:1980* ISO 3390-1976 | Methods of test for aluminium oxide. Determination of manganese content |
| BS 4140-24:1987* ISO 8220-1986 | Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves) |
| BS 4140-2:1986* ISO 803-1976 | Methods of test for aluminium oxide. Determination of loss of mass at 300°C |
| BS 4140-3:1986* ISO 806-1976 | Methods of test for aluminium oxide. Determination of loss of mass at 1000°C and 1200°C |
| BS 4140-4:1986* ISO 804-1976 | Methods of test for aluminium oxide. Preparation of sample solution by alkaline fusion |
| BS 4140-5:1986* ISO 1232-1976 | Methods of test for aluminium oxide. Determination of silica content |
| BS 4140-6:1980* ISO 900-1977 | Methods of test for aluminium oxide. Determination of titanium content |
| BS 4140-7:1986* ISO 805-1976 | Methods of test for aluminium oxide. Determination of iron content |
| BS 4140-8:1986* ISO 901-1976 | Methods of test for aluminium oxide. Determination of absolute density using a pyknometer |
| BS 4140-9:1986* ISO 902-1976 | Methods of test for aluminium oxide. Measurement of the angle of repose |
| BS 4140:Part 14:1990 | Methods of test for aluminium oxide. Determination of calcium content |
| BS 5050-8:1980* ISO 3391-1976 | Methods of test for cryolite. Determination of calcium content |
| BS 5050:1974 | Methods of test for cryolite |
| BS 6043-1.10:1994 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content |
| BS 6043-1.10:2000* ISO 12977:1999 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content. Section 1.10 Determination of volatile matter content |
| BS 6043-1.11:1994 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of the atomic C/H ratio of the quinoline-insoluble material |
| BS 6043-1.11:2000* ISO 12979:1999 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Determination of the atomic C/H ratio of the quinoline-insoluble material |
| BS 6043-1.12:1994 | Method of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of mesophase content |
| BS 6043-1.13:1994 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content (routine method) |
| BS 6043-1.13:2000* ISO 10238:1999 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content |
| BS 6043-1.1:1981 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling |
| BS 6043-1.1:2002* ISO 6257:2002 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling. Section 1 1: Sampling |
| BS 6043-1.2:1981* ISO 5939-1980 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of water content (Dean and Stark method) |
| BS 6043-1.3:1983* ISO 5940-1981 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of softening point (ring and ball method) |
| BS 6043-1.4:1981* ISO 6376-1980 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of toluene-insoluble material |
| BS 6043-1.5:1983* ISO 6791-1981 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of quinoline-insoluble material |
| BS 6043-1.6:1998* ISO 6998:1997 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value. Section 1.6 Determination of coking value |
| BS 6043-1.7:1988 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of apparent density (buoyancy method) |
| BS 6043-1.8:1986* ISO 8006-1985 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash |
| BS 6043-1.9:1989* ISO 9055:1988 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur content (bomb method) |
| BS 6043-2-18:2001* ISO 5931:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of total sulfur by the Eschka method |
| BS 6043-2.10:1996* ISO 10143:1995 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of electrical resistivity of calcined coke granules |
| BS 6043-2.11:1995* ISO 9406:1995 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content |
| BS 6043-2.12:1994 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of particle size distribution of fine coke |
| BS 6043-2.13:1996* ISO 10236:1995 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of tapped bulk density of green and calcined coke |
| BS 6043-2.15:1997* ISO 10142:1996 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of grain stability of calcined coke using a laboratory vibration mill |
| BS 6043-2.16:1998* ISO 11412:1998 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of water content of calcined coke |
| BS 6043-2.1:1985* ISO 6375-1980 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling |
| BS 6043-2.20.1:2001* ISO 12981-1:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Carboxy reactivity of calcined coke. Determination of the reactivity by a loss in mass method. Section 2.20: Carboxy reactivity of calcined coke Subsection 2.20.1: Determination of the reactivity by a loss in mass method |
| BS 6043-2.21.1:2001* ISO 12982-1:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Air reactivity of calcined coke. Determination of the reactivity by determination of ignition temperature. Section 2.21: Air reactivity of calcined coke Subsection 2.21.1: Determination of the reactivity by determination of ignition temperature |
| BS 6043-2.2:1985* ISO 8005-1984 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of ash content of green and calcined cokes |
| BS 6043-2.3:1997* ISO 8658:1997 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy |
| BS 6043-2.4:2000* ISO 12980:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Analysis by X-ray fluorescence spectroscopy |
| BS 6043-2.6:1986* ISO 8004-1985 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the density in xylene of calcined cokes |
| BS 6043-2.7:1986* ISO 6997-1985 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the apparent oil content of calcined cokes (gravimetric method) |
| BS 6043-2.8:1987* ISO 8723-1986 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of oil content by solvent extraction of calcined coke |
| BS 6043-2.9:2000* ISO 12984:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of particle size distribution |
| BS 6043-3.1.1:1999* ISO 8007-1:1999 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathodes |
| BS 6043-3.1.2:1999* ISO 8007-2:1999 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes |
| BS 6043-3.2:1997* ISO 9088:1997 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes |
| BS 6043-3.3:2000* ISO 12985-1:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method |
| BS 6043-3.4:2000* ISO 12985-2:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method |
| BS 6043-3.5.1:2000* ISO 12986-1:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of flexural strength. Three point method |
| BS 6043-3.6:2000* ISO 11713:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature |
| BS 6043-3.8.1:2001* ISO 12988-1:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Carboxy reactivity of prebaked anodes. Determination of the reactivity by a loss in mass method |
| BS 6043-3.9.1:2002* ISO 12989-1:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Chemical reactivity to air of prebaked anodes. Determination of the reactivity by a loss in mass method |
| BS 6043-4.0:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. General introduction |
| BS 6043-4.10:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the apparent porosity of baked rammed paste |
| BS 6043-4.11:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the thermal expansion of baked rammed paste |
| BS 6043-4.12:1992 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the thermal conductivity of baked rammed paste |
| BS 6043-4.13:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of ash of baked rammed paste |
| BS 6043-4.1:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling |
| BS 6043-4.1:2000* ISO 14422:1999 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling |
| BS 6043-4.2:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution |
| BS 6043-4.2:2000* ISO/TS 14423:1999 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution. Section 4.2 Determination of effective binder content and aggregate content by extraction with quinoline; determination of aggregate size distribution |
| BS 6043-4.3:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of aggregate size distribution after extraction by dichloromethane |
| BS 6043-4.4:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of volatile matter content of unbaked paste |
| BS 6043-4.4:2000* ISO/TS 14425:1999 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the volatile matter content of unbaked paste. Section 4.4 Determination of the volatile matter content of unbaked paste |
| BS 6043-4.5:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of water content of unbaked pastes |
| BS 6043-4.6:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of maximum rammed apparent density of unbaked paste |
| BS 6043-4.7:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Preparation of baked rammed test pieces and determination of baked apparent density, change in volume and loss in mass |
| BS 6043-4.8:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of electrical resistivity of baked rammed paste |
| BS 6043-4.9:1991 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of the cold crushing strength of baked rammed paste |
| BS 6043:Part 1:Section 1.6:1984* ISO 6998-1984 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value |
| BS 6043:Part 2:Section 2.11:1989* ISO 9406:1988 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content |
| BS 6043:Part 2:Section 2.3:1989 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of trace elements by flame atomic absorption spectrometry |
| BS ISO 12986-2:2005 | Carbonaceous materials used in the production of aluminium Prebaked anodes and cathode blocks. Determination of flexural strength by the four-point method |
| BS ISO 12987:2004 | Carbonaceous materials for the production of aluminium. Anodes, cathodes blocks, sidewall blocks and baked ramming pastes. Determination of the thermal conductivity using a comparative method |
| BS ISO 12988-2:2004 | Carbonaceous materials used in the production of aluminium Baked anodes. Determination of the reactivity to carbon dioxide. Thermogravimetric method |
| BS ISO 12989-2:2004 | Carbonaceous materials used in the production of aluminium Baked anodes and sidewall blocks. Determination of the reactivity to air. Thermogravimetric method |
| BS ISO 14420:2005 | Carbonaceous products for the production of aluminium. Baked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansion |
| BS ISO 14427:2004 | Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes. Preparation of unbaked test specimens and determination of apparent density after compaction |
| BS ISO 14428:2004 | Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Expansion/shrinkage during baking |
| BS ISO 14435:2005 | Carbonaceous materials for the production of aluminium. Petroleum coke. Determination of trace metals by inductively coupled plasma atomic emission spectrometry |
| BS ISO 15379-1:2004 | Carbonaceous materials for the production of aluminium. Cathode block materials. Determination of the expansion due to sodium penetration with application of pressure |
| BS ISO 15379-2:2004 | Carbonaceous materials for the production of aluminium. Cathode block materials. Determination of the expansion due to sodium penetration without application of pressure |
| BS ISO 15906:2007 | Carbonaceous materials for the production of aluminium. Baked anodes. Determination of the air permeability |
| BS ISO 17499:2006 | Carbonaceous materials used in the production of aluminium Determination of baking level expressed by equivalent temperature |
| BS ISO 17500:2006 | Aluminium oxide used for the production of primary aluminium. Determination of attrition index |
| BS ISO 17544:2004 | Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes. Determination of rammability of unbaked pastes |
| BS ISO 18515:2007 | Carbonaceous materials for the production of aluminium. Cathode blocks and baked anodes. Determination of compressive strength |
| BS ISO 20202:2004 | Carbonaceous materials used in the production of aluminium Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking |
| BS ISO 20203:2005 | Carbonaceous materials used in the production of aluminium Calcined coke. Determination of crystallite size of calcined petroleum coke by X-ray diffraction |
| BS ISO 21687:2007 | Carbonaceous materials used in the production of aluminium Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials |
| BS ISO 23202:2006 | Aluminium oxide used for the production of aluminium. Determination of particles passing a 20 micrometre aperture sieve |
| BS ISO 2926:2005 | Aluminium oxide used for the production of primary aluminium. Particle size analysis for the range 45 µm to 150 µm. Method using electroformed sieves |
| BS ISO 5940-2:2007 | Carbonaceous materials used in the production of aluminium Pitch for electrodes. Determination of the softening point (Mettler softening point method) |
| BS ISO 8005:2005 | Carbonaceous materials used in the production of aluminium Green and calcined coke. Determination of ash content |
| BS ISO 8007-3:2004 | Carbonaceous materials used in the production of aluminium Sampling plans and sampling from individual units. Sidewall blocks |
| BS ISO 8008:2005 | Aluminium oxide primarily used for the production of aluminium. Determination of specific surface area by nitrogen adsorption |
| BS ISO 806:2004 | Aluminium oxide primarily used for the production of aluminium. Determination of loss of mass at 300 ?C and 1 000 ?C |
