IHS Logo IHS - The Source for Critical Information and Insight BSi Logo
British Standards Online Heading
How to subscribe to British Standards Online
  Need a quote from IHS?
  The British Standards Online service is available via subscription from IHS. To speak to an expert about this service, please call:
+44 (0)1344 328300 or complete the
form below

Request an IHS quote for
British Standards Online
 
IHS Logo

BSi Logo
The following lists the key subject areas for this British Standards module.
Click the links to view the associated British Standards for each area.
Salts, Chemical technology ( Module 38 )

BS 1460:1967Method for determination of apparent density after compaction of precipitated calcium carbonate
BS 3674:1981Specification for sodium carbonate (technical grades)
BS 3984:1982Specification for sodium silicates
BS 4267-0:1987Ammonium nitrate. General introduction
BS 4267-10:1994Ammonium nitrate. Method for determination of matter soluble in diethyl ether
BS 4267-11:1994Ammonium nitrate. Method for determination of inorganic matter and grit insoluble in water
BS 4267-1:1988Ammonium nitrate. Method for determination of ammoniacal nitrogen content
BS 4267-2:1988Ammonium nitrate. Method for determination of total nitrogen content
BS 4267-3:1987* ISO 2365-1972Ammonium nitrate. Method for measurement of pH value
BS 4267-4:1987Ammonium nitrate. Method for determination of sulphated ash
BS 4267-5:1987* ISO 2995-1974Ammonium nitrate. Method for determination of matter insoluble in water
BS 4267-6:1987Ammonium nitrate. Method for determination of water content
BS 4267-7:1987Ammonium nitrate. Methods for determination of nitrite content
BS 4267-8:1987Ammonium nitrate. Methods for determination of chloride content
BS 4267-9:1987Ammonium nitrate. Method for determination of sulphate content
BS 4427-10:1976* ISO 3357:1975Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Determination of total phosphorus (V) oxide content: quinoline phosphomolybdate gravimetric method
BS 4427-11:1983Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Separation by column chromatography and determination of the different phosphate forms
BS 4427-12:1979* ISO 5372:1978Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Condensed phosphates for industrial use (including foodstuffs). Determination of arsenic content. Silver diethyldithiocarbamate photometric method
BS 4427-13:1982* ISO 5373:1981Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Condensed phosphates for industrial use (including foodstuffs) - determination of calcium content - flame atomic absorption spectrometric method
BS 4427-14:1989Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Condensed phosphates for industrial use (including foodstuffs): determination of chloride content
BS 4427-15:1982* ISO 5375:1979Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Condensed phosphates for industrial use (including foodstuffs) - determination of oxides of nitrogen content - 3,4-xylenol spectrophotometric method
BS 4427-1:1969Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Determination of matter insoluble in water in sodium tripolyphosphate
BS 4427-2:1969Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Measurement of pH value of sodium tripolyphosphate
BS 4427-3:1989Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Condensed phosphates for industrial use (including foodstuffs): determination of iron content
BS 4427-4:1969Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Determination of loss on ignition
BS 4427-5:1974Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Determination of particle size distribution
BS 4427-6:1974Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Estimation of pyrophosphate content of sodium pyrophosphate
BS 4993-10:1983* BS 5050-13:1983* ISO 6374-1981Methods of test for aluminium fluoride for industrial use. Determination of phosphorus content
BS 4993-1:1974Methods of test for aluminium fluoride for industrial use. Determination of fluorine content
BS 4993-2:1974Methods of test for aluminium fluoride for industrial use. Determination of iron content
BS 4993-3:1974Methods of test for aluminium fluoride for industrial use. Determination of silica content
BS 4993-4:1980* ISO 2925-1973Methods of test for aluminium fluoride for industrial use. Preparation and storage of test samples
BS 4993-5:1980* BS 5050-9:1980* ISO 3392-1976Methods of test for aluminium fluoride for industrial use. Determination of moisture content (Karl Fischer method)
BS 4993-6:1980* BS 5050-10:1980* ISO 3393-1976Methods of test for aluminium fluoride for industrial use. Determination of moisture content (gravimetric method)
BS 4993-7:1980* ISO 4279-1977Methods of test for aluminium fluoride for industrial use. Determination of sodium content
BS 4993-8:1980* BS 5050-11:1980* ISO 4280-1977Methods of test for aluminium fluoride for industrial use. Determination of sulphate content
BS 4993-9:1980* BS 5050-12:1980* ISO 5938-1979Methods of test for aluminium fluoride for industrial use. Determination of sulphur content (X-ray fluorescence spectrometric method)
BS 5050-8:1980* ISO 3391-1976Methods of test for cryolite. Determination of calcium content
BS 5050:1974Methods of test for cryolite
BS 5072-1:1974Methods of test for sodium fluoride for industrial use. Determination of water-insoluble matter
BS 5072-2:1974Methods of test for sodium fluoride for industrial use. Determination of moisture content
BS 5072-3:1975Methods of test for sodium fluoride for industrial use. Determination of fluorine content
BS 5072-4:1980* ISO 3428-1976Methods of test for sodium fluoride for industrial use. Preparation and storage of test samples
BS 5072-5:1980* ISO 3429-1976Methods of test for sodium fluoride for industrial use. Determination of iron content
BS 5072-6:1980* ISO 3430-1976Methods of test for sodium fluoride for industrial use. Determination of silica content
BS 5072-7:1980* ISO 3431-1976Methods of test for sodium fluoride for industrial use. Determination of soluble sulphates content
BS 5072-8:1980* ISO 3566-1976Methods of test for sodium fluoride for industrial use. Determination of chlorides content
BS 5072-9:1980* ISO 4278-1976Methods of test for sodium fluoride for industrial use. Determination of carbonate content
BS 5688-0:1986Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. General introduction
BS 5688-10:1979* ISO 2217:1975Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of matter insoluble in alkaline medium and preparation of test solutions of crude sodium borates
BS 5688-11:1979* ISO 2760:1975Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total aluminium content of crude sodium borates
BS 5688-12:1979* ISO 2761:1975Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total titanium content of crude sodium borates
BS 5688-13:1979* ISO 3118:1976Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of particle size distribution of sodium perborates by mechanical sieving
BS 5688-14:1979* ISO 3119:1976Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of chromium content of boric acid, boric oxide and disodium tetraborates
BS 5688-15:1979* ISO 3120:1976Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of water content of disodium tetraborates and crude sodium borates
BS 5688-16:1979* ISO 3121:1976Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of chloride content of boric acid, boric oxide and disodium tetraborates
BS 5688-17:1979* ISO 3122:1976Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of iron content of boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates
BS 5688-18:1979* ISO 3123:1976Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of rate of solution of sodium perborates
BS 5688-19:1979* ISO 3124:1976Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of iron soluble in alkaline medium in crude sodium borates
BS 5688-20:1979* ISO 3125:1976Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of aluminium soluble in alkaline medium in crude sodium borates
BS 5688-21:1979* ISO 3424:1975Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of bulk density of sodium perborates
BS 5688-27:1986* ISO 5935:1984Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total and alkali-soluble silica contents of crude sodium borates
BS 5688-28:1986* ISO 6918:1984Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total and alkali-soluble calcium and magnesium contents of crude sodium borates (flame atomic absorption spectrometric method)
BS 5688-29:1986* ISO 6920:1984Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total and alkali-soluble calcium and magnesium contents of crude sodium borates (titrimetric method)
BS 5688-3:1979* ISO 1916:1972Methods of test for boric acid, boric oxide, diRsodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of sodium oxide and boric oxide contents and loss on ignition of disodium tetraborates
BS 5688-4:1979* ISO 1917:1972Methods of test for boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of sodium oxide, boric oxide and available oxygen contents of hydrated sodium perborates
BS 5688-5:1979* ISO 1918:1972Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of sulphur compounds in boric acid, boric oxide, disodium tetraborates and crude sodium borates
BS 5688-6:1979* ISO 2214:1972Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of manganese content of boric acid, boric oxide and disodium tetraborates
BS 5688-7:1979* ISO 2215:1972Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of copper content of boric acid, boric oxide and disodium tetraborates
BS 5688-8:1979* ISO 2216:1972Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of sodium oxide and boric oxide contents of crude sodium borates
BS 5688-9:1979* ISO 2218:1972Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of loss in mass of crude sodium borates after heating at a temperature of 900°C
BS 6070-0:1981Methods of sampling and test for sodium carbonate for industrial use. General introduction
BS 6070-1:1981* ISO 740-1976Methods of sampling and test for sodium carbonate for industrial use. Determination of total soluble alkali content
BS 6070-2:1981* ISO 742-1973Methods of sampling and test for sodium carbonate for industrial use. Determination of chloride content
BS 6070-3:1981* ISO 745-1976Methods of sampling and test for sodium carbonate for industrial use. Determination of non-volatile matter
BS 6070-4:1981* ISO 746-1976Methods of sampling and test for sodium carbonate for industrial use. Determination of matter insoluble in water
BS 6070-5:1981* ISO 5143-1977Methods of sampling and test for sodium carbonate for industrial use. Determination of sulphate content
BS 6070-7:1981Methods of sampling and test for sodium carbonate for industrial use. Determination of copper content
BS 6092-0:1981Methods of sampling and test for sodium and potassium silicates for industrial use. General introduction
BS 6092-10:1981Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of matter insoluble in water
BS 6092-11:1981Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of chloride content of sodium metasilicate
BS 6092-12:1981Methods of sampling and test for sodium and potassium silicates for industrial use. Limit test for sulphate content of sodium metasilicate
BS 6092-1:1981* ISO 1687-1976Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of solution density at 20°C
BS 6092-2:1981* ISO 1688-1976Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of total solids content
BS 6092-3:1981* ISO 1690-1976Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of silica content (gravimetric method)
BS 6092-4:1981* ISO 1691-1976Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of carbonate content
BS 6092-5:1981* ISO 1692-1976Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of total alkali content
BS 6092-6:1981* ISO 2122-1972Methods of sampling and test for sodium and potassium silicates for industrial use. Preparation of solutions of not readily soluble products and determination of matter insoluble in water
BS 6092-7:1981* ISO 2124-1972Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of silica content (titrimetric method)
BS 6092-8:1981* ISO 3200-1975Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of sulphate content
BS 6092-9:1981* ISO 3201-1975Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of iron content
BS 6463-2:1984Quicklime, hydrated lime and natural calcium carbonate. Methods of chemical analysis
BS 6463:Part 3:1987Quicklime, hydrated lime and natural calcium carbonate. Methods of test for physical properties of quicklime
BS 662-1:1979Carbon disulphide for industrial use. Specification
BS 662-2:1978* ISO 3144:1974Carbon disulphide for industrial use. Sampling and methods of test
BS 662-3:1979Carbon disulphide for industrial use. Additional methods of test
BS 7319-10:1990Analysis of sodium chloride for industrial use. Method for determination of pH and total alkalinity
BS 7319-11:1990Analysis of sodium chloride for industrial use. Method for determination of iron content
BS 7319-12:1990Analysis of sodium chloride for industrial use. Methods for determination of anti-caking additives content of salt for food use
BS 7319-1:1990* ISO 2481:1973Analysis of sodium chloride for industrial use. Method for determination of sodium chloride content
BS 7319-2:1990* ISO 2483:1973Analysis of sodium chloride for industrial use. Method for determination of moisture content
BS 7319-3:1990* ISO 2479:1972Analysis of sodium chloride for industrial use. Method for determination of matter insoluble in water or in acid
BS 7319-4:1990* ISO 2480:1972Analysis of sodium chloride for industrial use. Method for determination of sulphate content
BS 7319-5:1990* ISO 2482:1973Analysis of sodium chloride for industrial use. Method for determination of calcium and magnesium contents
BS 7319-6:1990Analysis of sodium chloride for industrial use. Method for determination of cadmium content
BS 7319-7:1990Analysis of sodium chloride for industrial use. Method for determination of copper content
BS 7319-8:1990Analysis of sodium chloride for industrial use. Method for determination of lead content
BS 7319-9:1990Analysis of sodium chloride for industrial use. Method for determination of mercury content
IHS experience – your advantage

IHS, formerly known as Technical Indexes, is one of the foremost providers of standards, regulatory, product and supplier information to industries worldwide including construction, health & safety, engineering, education, rail, energy, automotive, defence and many more. With over 45 years experience and more than 6000 customers based in the UK alone, IHS is the only company of its type providing access to several million pages of vital information.

The British Standard Service provided by IHS focuses on supplying you an established, authoritative, reliable and comprehensive information source.

How to subscribe to British Standards Online