IHS Logo IHS - The Source for Critical Information and Insight BSi Logo
British Standards Online Heading
How to subscribe to British Standards Online
  Need a quote from IHS?
  The British Standards Online service is available via subscription from IHS. To speak to an expert about this service, please call:
+44 (0)1344 328300 or complete the
form below

Request an IHS quote for
British Standards Online
 
IHS Logo

BSi Logo
The following lists the key subject areas for this British Standards module.
Click the links to view the associated British Standards for each area.

Home >
Chemical technology ( Module 38 ) >

Surface active agents, Chemical technology ( Module 38 )
BS 1545:1990Specification for liquid toilet soap
BS 1715-1:1991Analysis of soaps. General introduction, sampling, and test for presence of synthetic anionic-active surface active agents
BS 1715-2.11:1989* ISO 673:1989Analysis of soaps. Quantitative test methods. Method for determination of ethanol-insoluble matter content
BS 1715-2.1:1989* ISO 685:1975Analysis of soaps. Quantitative test methods. Method for determination of total alkali content and total fatty matter content
BS 1715-2.2:1989* ISO 684:1974Analysis of soaps. Quantitative test methods. Method for determination of total free alkali content
BS 1715-2.3:1989* ISO 456:1973Analysis of soaps. Quantitative test methods. Method for determination of free caustic alkali content
BS 1715-2.4:1989Analysis of soaps. Quantitative test methods. Method for determination of free fatty acids content
BS 1715-2.5:1989* ISO 1067:1974Analysis of soaps. Quantitative test methods. Method for determination of unsaponifiable, unsaponified, and unsaponified saponifiable matter contents
BS 1715-2.6:1989* ISO 672:1978Analysis of soaps. Quantitative test methods. Method for determination of moisture and volatile matter content
BS 1715-2.7:1989* ISO 4323:1977Analysis of soaps. Quantitative test methods. Method for determination of chloride content
BS 1715-2.8:1989* ISO 1066:1975Analysis of soaps. Quantitative test methods. Method for determination of glycerol content
BS 1715-2.9:1990Analysis of soaps. Quantitative test methods. Method for determination of EDTA content
BS 1911:1990Specification for hard soap
BS 1912:1990Specification for soap flakes
BS 1913:1990Specification for soft soap
BS 1914:1990Specification for toilet soap
BS 3762-0:1991Analysis of formulated detergents. General introduction
BS 3762-1:1983* ISO 607-1980Analysis of formulated detergents. Methods of sample division
BS 3762-2:1989Analysis of formulated detergents. Qualitative test methods
BS 3762-3.10:1989Analysis of formulated detergents. Quantitative test methods. Methods for determination of short-chain alkylbenzenesulphonates content
BS 3762-3.11:1989Analysis of formulated detergents. Quantitative test methods. Method for determination of free formaldehyde content
BS 3762-3.12:1985Analysis of formulated detergents. Quantitative test methods. Method for determination of ammonia content
BS 3762-3.13:1983* ISO 6835-1981Analysis of formulated detergents. Quantitative test methods. Method for determination of total boron content
BS 3762-3.14:1985Analysis of formulated detergents. Quantitative test methods. Method for determination of carbonate content
BS 3762-3.15:1985Analysis of formulated detergents. Quantitative test methods. Method for estimation of carboxymethylcellulose content
BS 3762-3.16:1985Analysis of formulated detergents. Quantitative test methods. Method for determination of chloride content
BS 3762-3.17:1983* ISO 4321-1977Analysis of formulated detergents. Quantitative test methods. Method for determination of active oxygen content
BS 3762-3.18:1986Analysis of formulated detergents. Quantitative test methods. Method for determination of chlorine oxidizing agents content
BS 3762-3.19:1983* ISO 4313-1976Analysis of formulated detergents. Quantitative test methods. Method for determination of total phosphorus (V) oxide content
BS 3762-3.1:1990* ISO 2271:1989Analysis of formulated detergents. Quantitative test methods. Method for determination of anionic-active matter content
BS 3762-3.21:1986* ISO 8215-1985Analysis of formulated detergents. Quantitative test methods. Method for determination of total silica content
BS 3762-3.22:1986* ISO 8214-1985Analysis of formulated detergents. Quantitative test methods. Method for determination of inorganic sulphate content
BS 3762-3.23:1990* ISO 4325:1990Analysis of formulated detergents. Quantitative test methods. Method for determination of chelating agents content
BS 3762-3.24:1988Analysis of formulated detergents. Quantitative test methods. Method for determination of low molecular mass alcohols content
BS 3762-3.25:1989Analysis of formulated detergents. Quantitative test methods. Methods for determination of water and volatile matter content
BS 3762-3.5:1986Analysis of formulated detergents. Quantitative test methods. Methods for determination of total organic matter content
BS 3762-3.6:1986Analysis of formulated detergents. Quantitative test methods. Method for determination of matter soluble in light petroleum
BS 3762-3.7:1986Analysis of formulated detergents. Quantitative test methods. Method for determination of total non-ionic matter content
BS 3762-3.8:1986Analysis of formulated detergents. Quantitative test methods. Method for determination of alkanolamides content
BS 3762-3.9:1986Analysis of formulated detergents. Quantitative test methods. Method for determination of soap content
BS 3762-4.1:1989Analysis of formulated detergents. Physical test methods. Method for determination of clear point of liquid detergents
BS 3762-4.2:1986* ISO 697-1981Analysis of formulated detergents. Physical test methods. Method for determination of apparent bulk density
BS 3762:Part 3:Section 3.26:1989* ISO 2871-1:1988 Analysis of formulated detergents. Quantitative test methods. Method for determination of high molecular mass cationic-active matter content
BS 3762:Part 3:Section 3.2:1983* ISO 2869-1973 Analysis of formulated detergents. Quantitative test methods. Method for determination of hydrolyzable and non-hydrolyzable anionic-active matter content after hydrolysis under alkaline conditions
BS 3762:Part 3:Section 3.3:1987* ISO 2870-1986 Analysis of formulated detergents. Quantitative test methods. Method for determination of hydrolyzable and non-hydrolyzable anionic-active matter content after hydrolysis under acid conditions
BS 3762:Part 3:Section 3.4:1991* ISO 2871-2:1990 Analysis of formulated detergents. Quantitative test methods. Method for determination of lower molecular mass cationic-active matter content
BS 4088-1.1:1994Carpet cleaning products. Methods of sampling and test. General methods for formulations used in liquid form
BS 4088-1.2:1995Carpet cleaning products. Methods of sampling and test. Determination of cleaning performance of formulations designed for use with spray extraction machines
BS 4088-1.3:1995Carpet cleaning products. Methods of sampling and test. General methods for impregnated powder formulations
BS 4088-2:1994Carpet cleaning products. Specification for high foam formulations used in liquid form
BS 4088-3:1995Carpet cleaning products. Specification for spray extraction machine formulations used in liquid form
BS 4088-4:1995Carpet cleaning products. Specification for impregnated powder formulations
BS 4405:1990Specification for liquid soap
BS 4498:1982* ISO 302:1981Method for determination of the Kappa number of pulp (degree of delignification)
BS 5610:1978* ISO 4319-1977Surface active agents - detergents for washing fabrics - guide for comparative testing of performance
BS 6584:1985* ISO 4198-1984Guide for comparative testing of performance of detergents for hand dishwashing
BS 6585:1985* ISO 7535-1984Guide for comparative testing of performance of detergents for domestic machine dishwashing
BS 6829-0:1991Analysis of surface active agents (raw materials). General introduction
BS 6829-1.1:1987* ISO 6844-1983Analysis of surface active agents (raw materials). General methods. Method for determination of mineral sulphate content
BS 6829-1.2:1988* ISO 4314-1977Analysis of surface active agents (raw materials). General methods. Method for determination of free alkalinity or free acidity
BS 6829-1.3:1988* ISO 4315-1977Analysis of surface active agents (raw materials). General methods. Method for determination of alkalinity
BS 6829-1.5:1990Analysis of surface active agents (raw materials). General methods. Methods for determination of water content
BS 6829-1.6:1991* ISO 6839:1982Analysis of surface active agents (raw materials). General methods. Method for determination of solubility in water
BS 6829-2.1:1988Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of total alkaline sulphonates content
BS 6829-2.3:1989* ISO 6121:1988Analysis of surface active agents (raw materials). Alkane sulphonates. Method for determination of alkane monosulphonates content
BS 6829-3.1:1989* ISO 6841:1988Analysis of surface active agents (raw materials). Sodium alkylbenzenesulphonates. Method for determination of mean relative molecular mass
BS 6829-4.2:1989* ISO 2268:1972Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of polyethylene glycols and non-ionic active matter contents
BS 6829-4.3:1990* ISO 2270:1989Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of oxyethylene groups
BS 6829-4.5:1989* ISO 4322-1977Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of sulphated ash
BS 6829-4.6:1988* ISO 4326-1980Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of hydroxyl value
BS 6829-5.1:1990* ISO 6842:1989Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for determination of total active matter content
BS 6829-5.2:1989* ISO 6843:1988Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for estimation of mean relative molecular mass
BS 6829:Part 1:Section 1.4:1989Analysis of surface active agents (raw materials). General methods. Method for determination of the pH of an aqueous solution
BS 6829:Part 4:Section 4.1:1991* ISO 1065:1991 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Methods for determination of cloud temperature (cloud point)
BS 6829:Part 4:Section 4.4:1989* ISO 4320-1977 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of cloud point index
BS 6829:Part 5:Section 5.3:1989* ISO 8799:1988 Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates. Method for determination of unsulphated matter content
BS EN 12139:1999Surface active agents. Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
BS EN 12458:1999Surface active agents. Determination of stability in hard water
BS EN 12582:1999Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
BS EN 1262:1996Surface active agents. Determination of the pH value of surfactant solutions or dispersions
BS EN 1262:2003Surface active agents. Determination of pH value of solutions or dispersions
BS EN 12728:2000Surface active agents. Determination of foaming power. Perforated disc beating method
BS EN 12829:1998Surface active agents. Preparation of water with known calcium hardness
BS EN 12836:2002Surface active agents. Determination of the water number of alkoxylated products
BS EN 12974:2000Surface active agents. Determination of the 1,4-dioxane content in alkyl-ethoxy-sulfate products by GLC/head space procedure
BS EN 13267:2001Surface active agents. Determination of water content. Karl Fischer method
BS EN 13268:2001Surface active agents. Determination of ethylene oxide and propylene oxide groups in ethylene oxide and propylene oxide adductspylene
BS EN 13270:2001Surface active agents. Determination of the active matter content in alkyldimethylbetaines
BS EN 13273:2001Surface active agents. Determination of the content of non-ionic substances in anionic surface active agents by high performance liquid chromatography (HPLC)
BS EN 13320:2002Surface active agents. Gas chromatographic trace determination of free ethylene oxide in ethoxylates
BS EN 13405:2002Surface active agents. Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC)
BS EN 13435:2002Surface active agents. Determination of free amine content of alkyl dimethyl betaines
BS EN 13560:2001Surface active agents. Determination of amide nitrogen content. Potentiometric titration
BS EN 13716:2002Surface active agents. Determination of total base nitrogen. Potentiometric titration
BS EN 13717:2002Surface active agents. Determination of primary, secondary and tertiary amino nitrogen. Potentiometric titration
BS EN 13926:2003Surface active agents. Alkoxylated derivatives. Determination of hydroxyl value. N-methyl imidazole method
BS EN 13955:2002Surface active agents. Determination of Krafft point and solubility of ionic surface active agents
BS EN 13996:2002Surface active agents. Foaming power and antifoaming power Turbine stirring method
BS EN 14210:2003Surface active agents. Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method
BS EN 14370:2004Surface active agents. Determination of surface tension
BS EN 14371:2004Surface active agents. Determination of foamability and degree of foamability. Circulation test method
BS EN 14480:2004Surface active agents. Determination of anionic surface active agents. Potentiometric two-phase titration method
BS EN 14666:2005Surface active agents. Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules. Gas chromatographic method
BS EN 14667:2005Surface active agents. Determination of low boiling solvents in liquid formulations. Gas chromatographic method
BS EN 14668:2005Surface active agents. Determination of quaternary ammonium surface active agents in raw materials and formulated products. Potentiometric two-phase titration method
BS EN 14669:2005Surface active agents. Determination of anionic surface active agents and soaps in detergents and cleansers. Potentiometric two-phase titration method
BS EN 14670:2005Surface active agents. Sodium dodecyl sulfate. Analytical method
BS EN 14712:2005Surface active agents. Determination of physical stability in alkaline and acid solutions
BS EN 14880:2005Surface active agents. Determination of inorganic sulfate content in anionic surface active agents. Potentiometric lead selective electrode titration method
BS EN 14881:2005Surface active agents. Determination of N-(3-dimethylaminopropyl)-alkylamide content in alkylamidopropylbetaines. Gas chromatographic method
BS EN 14981:2006Surface active agents. Determination of content of high boiling solvents in liquid detergents by GLC
BS EN 15109:2006Surface active agents. Determination of the active matter content of alkylamidopropylbetaines
BS EN 15168:2006Surface active agents. Determination of hydroxyl value. p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
BS EN 1557:1997Surface active agents. Colorimetric characterization of optically clear coloured liquids (products) as X, Y, Z tristimulus values in transmission
BS EN 15608:2008Surface active agents. Quantitative determination of free fatty acid in alkylamidopropylbetaines. Gas- chromatographic method
BS EN 15647:2009Surface active agents. Determination of the dispersing effect of surfactants on powder
BS EN 1772:1995Surface active agents. Determination of wetting power by immersion
BS EN 1772:2000Surface active agents. Determination of wetting power by immersion
BS EN 1791:1997Surface active agents. Fatty alkyl dimethyl amine oxides. Determination of the amine oxide content
BS EN 1890:1999Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
BS EN 1890:2006Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
BS EN ISO 2870:1994* ISO 2870:1986Surface active agents. Detergents. Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions
BS EN ISO 2870:2009Surface active agents. Detergents. Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
BS EN ISO 2871-1:1994* ISO 2871-1:1988High molecular mass cationic-active matter
BS EN ISO 2871-2:1994* ISO 2871-2:1990Surface active agents. Detergents. Determination of cationic-active matter content. Cationic-active matter of low molecular mass (between 200 and 500)
BS EN ISO 4320:1998Non-ionic surface active agents. Determination of cloud point index. Volumetric method
BS EN ISO 6845:2003* ISO 6845:1989Surface active agents. Technical alkane sulfonates. Determination of mean relative molecular mass and content of the alkane monosulphonates and the alkane monosulfonate content
BS EN ISO 862:1995Glossary of terms for surface active agents
BS EN ISO 8799:1996Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulfates. Method for determination of unsulfated matter content
BS EN ISO 8799:2009Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Determination of content of unsulfated matter
BS ISO 6145-5:2001Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Capillary calibration devices
DD ENV 12836:2001Surface active agents. Determination of the water number of alkoxylated products
IHS experience – your advantage

IHS, formerly known as Technical Indexes, is one of the foremost providers of standards, regulatory, product and supplier information to industries worldwide including construction, health & safety, engineering, education, rail, energy, automotive, defence and many more. With over 45 years experience and more than 6000 customers based in the UK alone, IHS is the only company of its type providing access to several million pages of vital information.

The British Standard Service provided by IHS focuses on supplying you an established, authoritative, reliable and comprehensive information source.

How to subscribe to British Standards Online