| BS 2000-107:1993 | Methods of test for petroleum and its products. Determination of sulfur. Lamp combustion method |
| BS 2000-10:1995 | Methods of test for petroleum and its products. Determination of kerosine burning characteristics. 24 hour method |
| BS 2000-138:1998 | Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method |
| BS 2000-138:2000 | Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method |
| BS 2000-138:2002* IP 138:2002 | Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method |
| BS 2000-16:1998* ISO 3013:1997 | Methods of test for petroleum and its products. Petroleum products. Determination of the freezing point of aviation fuels |
| BS 2000-191:1983 | Methods of test for petroleum and its products. Distillation of natural gasoline |
| BS 2000-218:1982 | Methods of test for petroleum and its products. Calculation of cetane index of diesel fuels (range 55 and above) |
| BS 2000-274:1999* ISO 6297:1997 | Methods of test for petroleum and its products. Petroleum products. Aviation and distillate fuels. Determination of electrical conductivity |
| BS 2000-342:1993 | Methods of test for petroleum and its products. Gasoline, kerosine and distillate fuels. Determination of mercaptan sulfur. Potentiometric method |
| BS 2000-342:2000 | Methods of test for petroleum and its products. Determination of thiol (mercaptan) sulfur in light and middle distillate fuels. Potentiometric method |
| BS 2000-364:1985 | Methods of test for petroleum and its products. Calculated cetane index of diesel fuels (range below 55) |
| BS 2000-375:1994* ISO 10307-1:1993 | Methods of test for petroleum and its products. Petroleum products. Total sediment in residual fuel oils. Determination by hot filtration |
| BS 2000-375:1999* ISO 10307-1:1993 | Methods of test for petroleum and its products. Petroleum products. Total sediment in residual fuel oils. Determination by hot filtration |
| BS 2000-377:1995* ISO 10478:1994 | Methods of test for petroleum and its products. Petroleum products. Determination of aluminium and silicon in fuel oils. Inductively coupled plasma emission and atomic absorption spectroscopy methods |
| BS 2000-381:1997* ISO 3648:1994 | Methods of test for petroleum and its products. Aviation fuels. Estimation of net specific energy |
| BS 2000-390:1994* ISO 10307-2:1993 | Methods of test for petroleum and its products. Petroleum products. Total sediment in residual fuel oils. Determination using standard procedures for ageing |
| BS 2000-413:1996* ISO 8691:1994 | Methods of test for petroleum and its products. Petroleum products. Low levels of vanadium in liquid fuels. Determination by flameless atomic absorption spectrometry after ashing |
| BS 2000-456:2000 | Methods of test for petroleum and its products. Determination of potassium in gasoline. Atomic absorption spectrometry (AAS) method |
| BS 2000:Part 10:1993 | Methods of test for petroleum and its products. Determination of kerosine burning characteristics. 24 hour method |
| BS 2000:Part 138:1993 | Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method |
| BS 2000:Part 230:1993 | Methods of test for petroleum and its products. Determination of minimum handling and storage temperatures of fuel oil. Ferranti viscometer method |
| BS 2000:Part 270:1994 | Methods of test for petroleum and its products. Petroleum products. Determination of lead content of gasoline. Iodine monochloride method |
| BS 2000:Part 381:1995* ISO 3648:1994 | Methods of test for petroleum and its products. Aviation fuels. Estimation of net specific energy |
| BS 2000:Part 40:1992 | Methods of test for petroleum and its products. Determination of oxidation stability of gasoline. Induction period method |
| BS 2000:Part 40:1995* ISO 7536:1994 | Methods of test for petroleum and its products. Petroleum products. Determination of oxidation stability of gasoline. Induction period method |
| BS 2000:Part 69:1982 | Methods of test for petroleum and its products. Reid vapour pressure of petroleum products |
| BS 2637:1991* ISO 5163:1990 | Method for determination of knock characteristics of motor and aviation-type fuels (motor method) |
| BS 2638:1991* ISO 5164:1990 | Method for determination of knock characteristics of motor fuels (research method) |
| BS 2869:1998 | Specification for fuel oils for agricultural, domestic and industrial engines and boilers |
| BS 2869:2006 | Fuel oils for agricultural, domestic and industrial engines and boilers. Specification |
| BS 2869:Part 2:1988 | Fuel oils for non-marine use. Specification for fuel oil for agricultural and industrial engines and burners (classes A2, C1 C2, D, E, F, G and H) |
| BS 4040:1988 | Specification for leaded petrol (gasoline) for motor vehicles |
| BS 4040:1997 | Specification for leaded petrol (gasoline) for motor vehicles |
| BS 4040:2001 | Specification for leaded petrol (gasoline) for motor vehicles |
| BS 4348:1976* EN 5:1974 | Determination of existent gum in fuels by jet evaporation |
| BS 4714:1980* ISO 3675-1976 | Method for laboratory determination of density or relative density of crude petroleum and liquid petroleum products (hydrometer method) |
| BS 489:1983 | Specification for turbine oils |
| BS 5290:1976* EN 13:1974 | Determination of lead content of gasoline. Volumetric chromate method |
| BS 5580:1978* ISO 5165-1977 | Diesel fuels - determination of ignition quality - cetane method |
| BS 5657:1988* EN 23830:1989* ISO 3830:1981 | Method for determination of lead content of gasoline by the iodine monochloride method |
| BS 6188:1982* EN 116:1981 | Method for determination of cold filter plugging point of diesel and domestic heating fuels |
| BS 6380:1997 | Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869 |
| BS 6664:Part 5:1990* ISO 2719:1988 | Flashpoint of petroleum and related products. Method for determination of flashpoint by Pensky-Martens closed tester |
| BS 6843-0:1988* ISO 8216-0:1986 | Classification of petroleum fuels. General classification |
| BS 6843-1:1996* ISO 8216-1:1996 | Classification of petroleum fuels. Marine fuels |
| BS 6843-2:1988* ISO 8216-2:1986 | Classification of petroleum fuels. Gas turbine fuels for industrial and marine applications |
| BS 6843:Part 1:1987* ISO 8216/1-1986 | Classification of petroleum fuels. Marine fuels |
| BS 7340:1991* ISO 9770:1989 | Schedule for compressibility factors for petroleum hydrocarbons in the density range 638 kg/m³ to 1074 kg/m³ |
| BS 7800:1992 | Specification for high octane (super) unleaded petrol (gasoline) for motor vehicles |
| BS 7800:1998 | Specification for high octane (super) unleaded petrol (gasoline) for motor vehicles |
| BS 7800:2000 | Automotive fuel. High octane (super) unleaded petrol. Specification |
| BS 7800:2006 | Automotive fuel. High octane (super) unleaded petrol. Specification |
| BS EN 116:1998* BS 2000-309:1998 | Diesel and domestic heating fuels. Determination of cold filter plugging point |
| BS EN 12177:2000* BS 2000-425:2002 | Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography |
| BS EN 12662:1998* BS 2000-440:1999 | Methods of test for petroleum and its products. Liquid petroleum products. Determination of contamination in middle distillates |
| BS EN 12662:2008* BS 2000-440:2008 | Liquid petroleum products. Determination of contamination in middle distillates |
| BS EN 13016-1:2000* BS 2000-394:2001 | Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) |
| BS EN 13016-1:2007* BS 2000-394:2007 | Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE) |
| BS EN 13016-2:2000* BS 2000-409:2001 | Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40 °C and 100 °C |
| BS EN 13016-2:2007* BS 2000-409:2007 | Liquid petroleum products. Vapour pressure. Determination of absolute vapour pressure (AVP) between 40°C and 100°C |
| BS EN 13132:2000* BS 2000-466:2001 | Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching |
| BS EN 13723:2002* BS 2000-489:2002 | Methods of test for petroleum and its products. Petroleum products. Determination of low lead contents in gasolines. Wavelength-dispersive X-ray fluorescence spectrometry (XRF) |
| BS EN 14078:2003 | Liquid petroleum products. Determination of fatty acid methyl esters (FAME) in middle distillates. Infrared spectroscopy method |
| BS EN 14156:2003 | Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods |
| BS EN 14213:2003 | Heating fuels. Fatty acid methyl esters (FAME). Requirements and test methods |
| BS EN 14214:2003 | Automotive fuels. Fatty acid methylesters (FAME) for diesel engines. Requirements and test methods |
| BS EN 14214:2008 | Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods |
| BS EN 14274:2003* BS 2000-508:2003 | Methods of test for petroleum and its products. Automotive fuels. Assessment of petrol and diesel quality. Fuel quality monitoring system (FQMS) |
| BS EN 14275:2003* BS 2000-509:2003 | Automotive fuels. Assessment of petrol and diesel fuel quality. Sampling from retail site pumps and commercial site fuel dispensers |
| BS EN 14517:2004* BS 2000-526:2004 | Methods of test for petroleum and its products. BS 2000-526: Liquid petroleum products. Determination of hydrocarbon types and oxygenates in petrol. Multidimensional gas chromatography method |
| BS EN 14998:2005 | Derivatives from coal pyrolysis. Coal tar based oils: fluxings oils. Specifications and test methods |
| BS EN 15195:2007* BS 2000-498:2007 | Liquid petroleum products. Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| BS EN 15376:2007 | Automotive fuels. Ethanol as a blending component for petrol. Requirements and test methods |
| BS EN 15492:2008 | Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method |
| BS EN 15691:2009* BS 2000-576:2009 | Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method |
| BS EN 15692:2009* BS 2000-572:2009 | Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method |
| BS EN 15721:2009 | Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and volatile impurities. Gas chromatographic method |
| BS EN 15751:2009* BS 2000-574:2009 | Automotive fuels. Fatty acid methyl ester (FAME) fuel and blends with diesel fuel. Determination of oxidation stability by accelerated oxidation method |
| BS EN 15769:2009* BS 2000-573:2009 | Ethanol as a blending component of petrol. Determination of appearance. Visual method |
| BS EN 1601:1997* BS 2000-408:1997 | Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petrol. Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography (O-FID) |
| BS EN 228:1993 | Specification for unleaded petrol (gasoline) for motor vehicles |
| BS EN 228:1995 | Specification for unleaded petrol (gasoline) for motor vehicles |
| BS EN 228:1999 | Automotive fuels. Unleaded petrol. Requirements and test methods |
| BS EN 228:2000 | Automotive fuels. Unleaded petrol. Requirements and test methods |
| BS EN 228:2004 | Automotive fuels. Unleaded petrol. Requirements and test methods |
| BS EN 228:2008 | Automotive fuels.Unleaded petrol.Requirements and test methods |
| BS EN 237:1996* BS 2000-428:1996 | Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry |
| BS EN 237:2004* BS 2000-428:2004 | Methods of test for petroleum and its products. BS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry |
| BS EN 238:1996* BS 2000-429:1996 | Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry |
| BS EN 25163:1994* BS 2000-236:1994* ISO 5163:1990 | Methods of test for petroleum and its products. Motor and aviation-type fuels. Determination of knock characteristics. Motor method |
| BS EN 25164:1994* BS 2000-237:1994* ISO 5164:1990 | Methods of test for petroleum and its products. Motor fuels. Determination of knock characteristics. Research method |
| BS EN 26246:1994* BS 2000:Part 131:1994* ISO 6246:1981 | Methods of test for petroleum and its products. Petroleum products. Motor gasoline and aviation fuels. Determination of existent gum. Jet evaporation method |
| BS EN 589:2008 | Automotive fuels. LPG. Requirements and test methods |
| BS EN 590:1993 | Specification for automotive diesel fuel |
| BS EN 590:1995 | Specification for automotive diesel fuel |
| BS EN 590:1997 | Specification for automotive diesel fuel |
| BS EN 590:1999 | Automotive fuels. Diesel. Requirements and test methods |
| BS EN 590:2000 | Automotive fuels. Diesel. Requirements and test methods |
| BS EN 590:2004 | Automotive fuels. Diesel. Requirements and test methods |
| BS EN 590:2009 | Automotive fuels. Diesel. Requirements and test methods |
| BS EN ISO 12156-1:2000 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method |
| BS EN ISO 12156-1:2006 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method |
| BS EN ISO 12205:1996* BS 2000-388:1996* ISO 12205:1995 | Methods of test for petroleum and its products. Petroleum products. Determination of the oxidation stability of middle-distillate fuels |
| BS EN ISO 13759:1997* BS 2000-430:1997* ISO 13759:1996 | Methods of test for petroleum and its products. Petroleum products. Determination of alkyl nitrate in diesel fuels. Spectrometric method |
| BS EN ISO 3735:1996 | Crude petroleum and fuel oils. Determination of sediment. Extraction method |
| BS EN ISO 4264:1997* BS 2000-380:1997* ISO 4264:1995 | Methods of test for petroleum and its products. Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation |
| BS EN ISO 4264:2007* BS 2000-380:2007 | Petroleum products. Calculation of cetane index of middle-distillate fuels by the four-variable equation |
| BS EN ISO 5163:2005* BS 2000-236:2005 | Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method |
| BS EN ISO 5164:2005* BS 2000-237:2005 | Petroleum products. Determination of knock characteristics of motor fuels. Research method |
| BS EN ISO 5165:1998* BS 2000-41:1998* ISO 5165:1998 | Petroleum products. Determination of the ignition quality of diesel fuels. Cetane engine method |
| BS EN ISO 6246:1998* BS 2000-131:1998* ISO 6246:1995 | Petroleum products. Gum content of light and middle distillate fuels. Jet evaporation method |
| BS EN ISO 7536:1996* BS 2000-40:1996* ISO 7536:1994 | Methods of test for petroleum and its products. Petroleum products. Determination of oxidation stability of gasoline. Induction period method |
| BS ISO 10307-1:2009 | Petroleum products. Total sediment in residual fuel oils. Determination by hot filtration |
| BS ISO 10307-2:2009 | Petroleum products. Total sediment in residual fuel oils. Determination using standard procedures for ageing |
| BS ISO 12156-1:1997 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Test method |
| BS ISO 12156-2:1998 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Limit |
| BS ISO 12156-2:2007 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR). Limit |
| BS ISO 15911:2000* BS 2000-355:2001 | Methods of test for petroleum and its products. Estimation of net specific energy of aviation turbine fuels using hydrogen content data |
| BS ISO 8216-1:2005 | Petroleum products. Fuels (class F). Classification. Categories of marine fuels |
| BS ISO 8216-99:2002 | Petroleum products. Fuels (class F). Classification. General |
| BS ISO 8217:2005 | Petroleum products. Fuels (class F). Specifications of marine fuels |
| BS MA 100:1996* ISO 8217:1996 | Specification for petroleum fuels for marine oil engines and boilers |
| CWA 15145:2004 | Automotive fuels. Water in diesel fuel emulsions for use in internal combustion engines. Requirements and test methods |
| CWA 15293:2005 | Automotive fuels. Ethanol E85. Requirements and test methods |
| CWA 15940:2009 | Automotive fuels. Paraffinic diesel from synthesis or hydrotreatment. Requirements and test methods |
| PD CEN/TR 15139:2005 | Petroleum products and other liquids. Applicability of test methods on sulfur determination in petrol and diesel fuel |
| PD CEN/TR 15160:2005 | Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests |
| PD CEN/TR 15367-1:2007 | Petroleum products. Guide for good housekeeping. Automotive diesel fuels |
| PD CEN/TR 15367-2:2007 | Petroleum products. Guide for good housekeeping. Automotive petrol fuels |
| PD CEN/TR 15367-3:2009 | Petroleum products. Guide for good housekeeping. Prevention of cross contamination |
| PD CEN/TR 15738:2008 | Petroleum products. Heating fuels. Need, feasibility and required deliverables for a common European specification |
| PD CEN/TR 15745:2008 | Liquid petroleum products. Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method Round Robin research report |
