| BS 2096:1954 | Method of testing oil-fired rotary dryers for use in asphalt and coated macadam plant |
| BS 2654:1989 | Specification for manufacture of vertical steel welded non-refrigerated storage tanks with butt-welded shells for the petroleum industry |
| BS 2797:1976 | Specification for leathers for gas meter diaphragms |
| BS 3395:1989 | Specification for electrically bonded rubber hoses and hose assemblies for dispensing petroleum based fuels |
| BS 5045-8:2000 | Transportable gas containers. Specification for seamless aluminium alloy gas containers of water capacity 0.5 L up to 15 L and up to 300 bar charged pressure at 15°C for special portable application |
| BS 5355:1976 | Specification for filling ratios and developed pressures for liquefiable and permanent gases |
| BS 6847:1987* ISO 6808-1984 | Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids |
| BS 7117-1:1991 | Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Specification for construction |
| BS 7117-2:1991 | Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Guide to installation |
| BS 7117-3:1991 | Metering pumps and dispensers to be installed at filling stations and used to dispense liquid fuel. Guide to maintenance after installation |
| BS 7281:1990 | Specification for polyethylene pipes for the supply of gaseous fuels |
| BS EN 10290:2002 | Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings |
| BS EN 12007-1:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. General functional recommendations |
| BS EN 12007-2:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for polyethylene (MOP up to and including 10 bar) |
| BS EN 12007-3:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for steel |
| BS EN 12007-4:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for renovation |
| BS EN 12066:1998 | Installations and equipment for liquefied natural gas. Testing of insulating linings for liquefied natural gas impounding areas |
| BS EN 12186:2000 | Gas supply systems. Gas pressure regulating stations for transmission and distribution. Functional requirements |
| BS EN 12308:1998 | Installations and equipment for LNG. Suitability testing of gaskets designed for flanged joints used on LNG piping |
| BS EN 12567:2000 | Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests |
| BS EN 12583:2000 | Gas supply systems. Compressor stations. Functional requirements |
| BS EN 12732:2000 | Gas supply systems. Welding steel pipework. Functional requirements |
| BS EN 12807:2001 | Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction |
| BS EN 12807:2009 | LPG equipment and accessories. Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG). Design and construction |
| BS EN 12819:2002 | Inspection and requalification of LPG tanks greater than 13 m³ overground |
| BS EN 12820:2002 | Inspection and requalification of LPG tanks greater than 13 m³ underground |
| BS EN 12838:2000 | Installations and equipment for liquefied natural gas. Suitability testing of LNG sampling systems |
| BS EN 13012:2001 | Petrol filling stations. Construction and performance of automatic nozzles for use on fuel dispensers |
| BS EN 13423:2000 | Compressed natural gas vehicle operations |
| BS EN 13483:2005 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
| BS EN 1360:1997 | Rubber hoses and hose assemblies for measured fuel dispensing. Specification |
| BS EN 1360:2005 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
| BS EN 13616:2004 | Overfill prevention devices for static tanks for liquid petroleum fuels |
| BS EN 13617-1:2004+A1:2009 | Petrol filling stations. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| BS EN 13617-3:2004 | Petrol filling stations. Safety requirements for constuction and performance of shear valves |
| BS EN 13617-4:2004 | Petrol filling stations. Safety and environmental requirements for construction and performance of swivels for use on metering pumps and dispensers |
| BS EN 13645:2002 | Installations and equipment for liquefied natural gas. Design of onshore installations with a storage capacity between 5 t and 200 t |
| BS EN 13760:2003 | Automotive LPG filling system for light and heavy duty vehicles. Nozzle, test requirements and dimensions |
| BS EN 13776:2002 | Filling and discharge procedures for LPG road tankers |
| BS EN 13787:2001 | Elastomers for gas pressure regulators and associated safety devices for inlet pressures up to 100 bar |
| BS EN 13942:2003 | Petroleum and natural gas industries. Pipeline transportation. Pipeline valves |
| BS EN 13942:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves |
| BS EN 14075:2002 | Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m³ and for installation underground. Design and manufacture |
| BS EN 14125:2004 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| BS EN 14141:2003 | Valves for natural gas transportation in pipelines. Performance requirements and tests |
| BS EN 14161:2003 | Petroleum and natural gas industries. Pipeline transportation systems |
| BS EN 14163:2001 | Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines |
| BS EN 14382:2002 | Safety devices for gas pressure regulating stations and installations. Gas safety shut-off devices for operating pressure up to 100 bar |
| BS EN 1440:1997 | Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Periodic requalification |
| BS EN 14678-1:2006 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers |
| BS EN 14678-2:2007 | LPG equipment and accessories. Equipment for liquefied petroleum gas automotive filling stations. Components other than dispensers, and installation requirements |
| BS EN 1473:1997 | Installation and equipment for liquefied natural gas. Design of onshore installations |
| BS EN 1473:2007 | Installation and equipment for liquefied natural gas. Design of onshore installations |
| BS EN 1474-1:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems. Design and testing of transfer arms |
| BS EN 1474-2:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems. Design and testing of transfer hoses |
| BS EN 1474-3:2008 | Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems. Offshore transfer systems |
| BS EN 1474:1997 | Installation and equipment for liquefied natural gas. Design and testing of loading/unloading arms |
| BS EN 14870-1:2004 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Induction bends |
| BS EN 14870-2:2004 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Fittings |
| BS EN 14870-3:2006 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Flanges |
| BS EN 15268:2008 | Petrol filling stations. Safety requirements for the construction of submersible pump assemblies |
| BS EN 1532:1997 | Installation and equipment for liquefied natural gas. Ship to shore interface |
| BS EN 1594:2000 | Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements |
| BS EN 1594:2009 | Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements |
| BS EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery. Specification |
| BS EN 1762:1998 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2 5 MPa). Specification |
| BS EN 1765:1998 | Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
| BS EN 1765:2004 | Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
| BS EN 1918-1:1998 | Gas supply systems. Underground gas storage. Functional recommendations for storage in aquifers |
| BS EN 1918-2:1998 | Gas supply systems. Underground gas storage. Functional recommendations for storage in oil and gas fields |
| BS EN 1918-3:1998 | Gas supply systems. Underground gas storage. Functional recommendations for storage in solution-mined salt cavities |
| BS EN 1918-4:1998 | Gas supply systems. Underground gas storage. Functional recommendations for storage in rock caverns |
| BS EN 1918-5:1998 | Gas supply systems. Underground gas storage. Functional recommendations for surface facilities |
| BS EN 976-1:1997 | Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Requirements and test methods for single wall tanks |
| BS EN 976-2:1997 | Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Transport, handling, storage and installation of single wall tanks |
| BS EN ISO 10426-1:2000 | Petroleum and natural gas industries. Cements and materials for well cementing. Specification |
| BS EN ISO 11439:2000 | Gas cylinders. High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| BS EN ISO 13679:2006 | Petroleum and natural gas industries. Procedures for testing casing and tubing connections |
| BS EN ISO 14224:2006 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
| BS EN ISO 14692-1:2002 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Vocabulary, symbols, applications and materials |
| BS EN ISO 14692-2:2002 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Qualification and manufacture |
| BS EN ISO 14692-3:2002 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. System design |
| BS EN ISO 14692-4:2002 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Fabrication, installation and operation |
| BS EN ISO 14723:2002 | Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves |
| BS EN ISO 14723:2009 | Petroleum and natural gas industries. Pipeline transportation systems. Subsea pipeline valves |
| BS EN ISO 16708:2006 | Petroleum and natural gas industries. Pipeline transportation systems. Reliability-based limit state methods |
| BS EN ISO 17292:2004 | Metal ball valves for the petroleum, petrochemical and allied industries |
| BS EN ISO 20815:2008 | Petroleum, petrochemical and natural gas industries. Production assurance and reliability management |
| BS EN ISO 21329:2004 | Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors |
| BS EN ISO 21809-2:2007 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Fusion-bonded epoxy coatings |
| BS EN ISO 3675:1998* BS 2000-160:1998* ISO 3675:1998 | Crude petroleum and liquid petroleum products. Laboratory determination of density. Hydrometer method |
| BS EN ISO 6808:2001 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification |
| BS ISO 10838-2:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter greater than 63mm |
| BS ISO 10838-3:2001 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 11563:2003 | Crude petroleum and petroleum products. Bulk cargo transfer. Guidelines for achieving the fullness of pipelines |
| BS ISO 12176-2:2008 | Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems. Electrofusion |
| BS ISO 12917-1:2002 | Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Manual methods |
| BS ISO 12917-2:2002 | Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Internal electro-optical distance-ranging method |
| BS ISO 14531-1:2002 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Pipes |
| BS ISO 14531-2:2004 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for heat-fusion jointing |
| BS ISO 15649:2001 | Petroleum and natural gas industries. Piping |
| BS ISO 18225:2007 | Plastics piping systems. Multilayer piping systems for outdoor gas installations. Specifications for systems |
| BS ISO 1998-5:1998 | Petroleum industry. Terminology. Transport, storage, distribution |
| BS ISO 21307:2009 | Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems |
| BS ISO 2929:2002 | Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions. Pipes of requirement class C |
| BS ISO 4266-1:2002 | Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of level in atmospheric tanks |
| BS ISO 4266-2:2002 | Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of level in marine vessels |
| BS ISO 4266-3:2002 | Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of level in pressurized storage tanks (non-refrigerated) |
| BS ISO 4266-4:2002 | Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of temperature in atmospheric tanks |
| BS ISO 4266-5:2002 | Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of temperature in marine vessels |
| BS ISO 4266-6:2002 | Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Measurement of temperature in pressurized storage tanks (non-refrigerated) |
| BS ISO 4269:2001 | Petroleum and liquid petroleum products. Tank calibration by liquid measurement. Incremental method using volumetric meters |
| BS ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications |
| BS ISO 8085-1:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Fittings for socket fusion using heated tools |
| BS ISO 8085-2:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Spigot fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings |
| BS ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Electrofusion fittings |
| BS ISO/TR 13739:1998* ISO/TR 13739:1998 | Petroleum products. Methods of specifying practical procedures for the transfer of bunker fuels to ships |
| PD 8010-1:2004 | Code of practice for pipelines. Steel pipelines on land |
| PD 8010-2:2004 | Code of practice for pipelines. Subsea pipelines |
| PD 8010-3:2009 | Code of practice for pipelines. Steel pipelines on land. Guide to the application of pipeline risk assessment to proposed developments in the vicinity of major accident hazard pipelines containing flammables. Supplement to PD 8010-1:2004 |
| PD CEN/TR 14549:2004 | Guide to the use of ISO 15649 and ANSI/ASME B31.3 for piping in Europe in compliance with the Pressure Equipment Directive |
| PD CEN/TR 15367-1:2007 | Petroleum products. Guide for good housekeeping. Automotive diesel fuels |
| PD CEN/TR 15367-2:2007 | Petroleum products. Guide for good housekeeping. Automotive petrol fuels |
| PD CEN/TR 15367-3:2009 | Petroleum products. Guide for good housekeeping. Prevention of cross contamination |
