| BIP 3045:2006 | Stainless steels and delivery conditions CD-ROM |
| BS 1407:1970 | Specification for high carbon bright steel (silver steel) |
| BS 1449:Part 2:1983 | Steel plate, sheet and strip. Specification for stainless and heat-resisting steel plate, sheet and strip |
| BS 1501:Part 2:1988 | Steels for pressure purposes. Specification for alloy steels: plates |
| BS 2S 144:1976 | Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa) |
| BS 3111-1:1987 | Steel for cold forged fasteners and similar components. Specification for carbon and low alloy steel wire |
| BS 3111-2:1979 | Steel for cold forged fasteners and similar components. Stainless steel |
| BS 4106:1967 | Specification for surgical stainless steel monofilament wire. Fully softened |
| BS 4659:1989 | Specification for tool and die steels |
| BS 4S 99:1976 | Specification for 2.5% nickel-chromium-molybdenum (high carbon) steel billets, bars, forgings and parts (1230-1420 MPa: limiting ruling section 150 mm) |
| BS 7191:1989 | Specification for weldable structural steels for fixed offshore structures |
| BS 970-1:1996 | Specification for wrought steels for mechanical and allied engineering purposes. General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
| BS 970:Part 1:1991 | Specification for wrought steels for mechanical and allied engineering purposes. General inspection and testing procedures and specific requirements for carbon, carbon manganese, alloy and stainless steels |
| BS A 274:1981 | Specification for procurement of alloy steel bolts, metric with a minimum tensile strength of 1100 MPa |
| BS EN 10028-7:2000 | Flat products made of steels for pressure purposes. Stainless steels |
| BS EN 10028-7:2007 | Flat products made of steels for pressure purposes. Stainless steels |
| BS EN 10088-1:1995 | Stainless steels. List of stainless steels |
| BS EN 10088-1:2005 | Stainless steels. List of stainless steels |
| BS EN 10088-2:1995 | Stainless steels. Technical delivery conditions for sheet/plate and strip for general purposes |
| BS EN 10088-2:2005 | Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 10088-3:2005 | Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| BS EN 10088-4:2009 | Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| BS EN 10088-5:2009 | Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| BS EN 10090:1998 | Valve steels and alloys for internal combustion engines |
| BS EN 10250-2:2000 | Open steel die forgings for general engineering purposes. Non-alloy quality and special steels |
| BS EN 10250-3:2000 | Open steel die forgings for general engineering purposes. Alloy special steels |
| BS EN 10250-4:2000 | Open steel die forgings for general engineering purposes. Stainless steels |
| BS EN 10253-3:2008 | Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements |
| BS EN 10253-4:2008 | Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements |
| BS EN 10258:1997 | Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape |
| BS EN 10259:1997 | Cold-rolled stainless and heat resisting steel wide strip and plate/sheet. Tolerances on dimensions and shape |
| BS EN 10263-5:2001 | Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery conditions for stainless steels |
| BS EN 10264-4:2002 | Steel wire and wire products. Steel wire for ropes. Stainless steel wire |
| BS EN 10267:1998 | Ferritic-pearlitic steels for precipitation hardening from hot-working temperatures |
| BS EN 10272:2000 | Stainless steel bars for pressure purposes |
| BS EN 10272:2007 | Stainless steel bars for pressure purposes |
| BS EN 10277-2:1999 | Bright steel products. Technical delivery conditions. Steels for general engineering purposes |
| BS EN 10277-2:2008 | Bright steel products. Technical delivery conditions. Steels for general engineering purposes |
| BS EN 10277-4:2008 | Bright steel products. Technical delivery conditions. Case hardening steels |
| BS EN 10277-5:2008 | Bright steel products. Technical delivery conditions. Steels for quenching and tempering |
| BS EN 10283:1999 | Corrosion resistant steel castings |
| BS EN 10315:2006 | Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near by technique |
| BS EN ISO 683-17:1999 | Heat-treated steels, alloy steels and free-cutting steels. Ball and roller bearing steels |
| BS EN ISO 7153-1:2001* BS 5194-1:1991 | Surgical instruments. Metallic materials. Stainless steel |
| BS EN ISO 9445:2006 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form |
| DD ENV 1090-6:2001 | Execution of steel structures. Supplementary rules for stainless steel |
| DD ISO/TS 15510:2003 | Stainless steels. Chemical composition |
| PD 970:2001 | Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels |
| PD 970:2005 | Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels |
