| BIP 3045:2006 | Stainless steels and delivery conditions CD-ROM |
| BS 1449-1.14:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes |
| BS 1449-1.15:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled narrow strip supplied in a range of conditions for heat treatment and general engineering purposes |
| BS 1449-1.1:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. General specification |
| BS 1449-1.8:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip based on formability |
| BS 1449:Part 1:Section 1.10:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip based on specified minimum strength |
| BS 1449:Part 1:Section 1.11:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled narrow strip based on specified minimum strength |
| BS 1449:Part 1:Section 1.12:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for tolerances on dimensions and shape for hot rolled narrow strip |
| BS 1449:Part 1:Section 1.13:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for tolerances on dimensions and shape for cold rolled narrow strip |
| BS 1449:Part 1:Section 1.2:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled steel plate, sheet and wide strip based on formability |
| BS 1449:Part 1:Section 1.3:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled steel plate, sheet and wide strip for vitreous enamelling based on formability |
| BS 1449:Part 1:Section 1.4:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled wide material based on specified minimum strength |
| BS 1449:Part 1:Section 1.5:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled wide material based on specified minimum strength |
| BS 1449:Part 1:Section 1.9:1991 | Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for cold rolled narrow strip based on formability |
| BS 1449:Part 2:1983 | Steel plate, sheet and strip. Specification for stainless and heat-resisting steel plate, sheet and strip |
| BS 1501-3:1990 | Steels for pressure purposes. Specification for corrosion- and heat-resisting steels: plates, sheet and strip |
| BS 2858:1957 | Specification for steel plates for use in the manufacture of galvanizing pots |
| BS 3083:1988 | Specification for hot-dip zinc coated and hot-dip aluminium/zinc coated corrugated steel sheets for general purposes |
| BS 405:1987 | Specification for uncoated expanded metal carbon steel sheets for general purposes |
| BS 5996:1993 | Specification for acceptance levels for internal imperfections in steel plate, strip and wide flats, based on ultrasonic testing |
| BS 6497:1984 | Specification for powder organic coatings for application and stoving to hot-dip galvanized hot-rolled steel sections and preformed steel sheet for windows and associated external architectural purposes, and for the finish on galvanized steel sections and preformed sheet coated with powder organic coatings |
| BS 6536:1985 | Specification for continuously hot-dip aluminium/silicon coated cold reduced carbon steel sheet and strip |
| BS 6582:1985 | Specification for continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products |
| BS 6582:2000 | Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products |
| BS 6781:1986* EU 169-1985 | Specification for continuously organic coated steel flat products |
| BS 6830:1987 | Specification for continuously hot-dip aluminium/zinc alloy coated cold rolled carbon steel flat products |
| BS 7613:1994 | Specification for hot rolled quenched and tempered weldable structural steel plates |
| BS EN 10025-1:2004 | Hot rolled products of structural steels. General technical delivery conditions |
| BS EN 10025-2:2004 | Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels |
| BS EN 10025-3:2004 | Hot rolled products of structural steels. Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| BS EN 10025-4:2004 | Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| BS EN 10025-5:2004 | Hot rolled products of structual steels. Technical delivery conditons for structural steels with improved atmospheric corrosion resistance |
| BS EN 10025-6:2004+A1:2009 | Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
| BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
| BS EN 10028-1:2000 | Specification for flat products made of steels for pressure purposes. General requirements |
| BS EN 10028-1:2007+A1:2009 | Flat products made of steels for pressure purposes. General requirements |
| BS EN 10028-2:2003 | Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties |
| BS EN 10028-2:2009 | Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties |
| BS EN 10028-3:2003 | Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, normalized |
| BS EN 10028-3:2009 | Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized |
| BS EN 10028-4:2003 | Flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties |
| BS EN 10028-4:2009 | Flat products made of steels for pressure purposes. Nickel alloy steels with specified low temperature properties |
| BS EN 10028-5:1997 | Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled |
| BS EN 10028-5:2003 | Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled |
| BS EN 10028-5:2009 | Flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled |
| BS EN 10028-6:1997 | Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered |
| BS EN 10028-6:2003 | Specification for flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered |
| BS EN 10028-6:2009 | Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered |
| BS EN 10028-7:2000 | Flat products made of steels for pressure purposes. Stainless steels |
| BS EN 10028-7:2007 | Flat products made of steels for pressure purposes. Stainless steels |
| BS EN 10029:1991 | Specification for tolerances on dimensions, shape and mass for hot rolled steel plates 3 mm thick or above |
| BS EN 10048:1997 | Hot rolled narrow steel strip. Tolerances on dimensions and shape |
| BS EN 10049:2005 | Measurement of roughness average. Ra and peak count RPc on metallic flat products |
| BS EN 10051:1991+A1:1997 | Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels. Tolerances on dimensions and shape |
| BS EN 10067:1997 | Hot rolled bulb flats. Dimensions and tolerances on shape, dimensions and mass |
| BS EN 10088-2:1995 | Stainless steels. Technical delivery conditions for sheet/plate and strip for general purposes |
| BS EN 10088-2:2005 | Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 10088-3:1995 | Stainless steels. Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes |
| BS EN 10088-3:2005 | Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| BS EN 10088-4:2009 | Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| BS EN 10106:1996 | Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state |
| BS EN 10106:2007 | Cold rolled non-oriented electrical steel sheet and strip delivered in the fully processed state |
| BS EN 10107:1996 | Grain-oriented electrical steel sheet and strip delivered in the fully processed state |
| BS EN 10107:2005 | Grain-oriented electrical steel sheet and strip delivered in the fully processed state |
| BS EN 10111:1998 | Continuously hot-rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
| BS EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
| BS EN 10120:1997 | Steel sheet and strip for welded gas cylinders |
| BS EN 10120:2008 | Steel sheet and strip for welded gas cylinders |
| BS EN 10126:1996 | Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state |
| BS EN 10130:1991 | Specification for cold rolled low carbon steel flat products for cold forming: technical delivery conditions |
| BS EN 10130:1999 | Cold-rolled low-carbon steel flat products for cold forming. Technical delivery conditions |
| BS EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming. Technical delivery conditions |
| BS EN 10131:1991 | Cold-rolled uncoated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape |
| BS EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape |
| BS EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. General |
| BS EN 10132-2:2000 | Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Case hardening steels |
| BS EN 10132-3:2000 | Cold rolled narrow steel strip for heat treatment. Technical delivery conditions. Steels for quenching and tempering |
| BS EN 10137-1:1996 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. General delivery conditions |
| BS EN 10137-2:1996 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for quenched and tempered steels |
| BS EN 10137-3:1996 | Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions. Delivery conditions for precipitation hardened steels |
| BS EN 10139:1998 | Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions |
| BS EN 10140:1997 | Cold rolled narrow steel strip. Tolerances on dimensions and shape |
| BS EN 10140:2006 | Cold rolled narrow steel strip. Tolerances on dimensions and shape |
| BS EN 10142:1991 | Specification for continuously hot-dip zinc coated low carbon steel sheet and strip for cold forming: technical delivery conditions |
| BS EN 10142:2000 | Continuously hot-dip zinc coated low carbon steels strip and sheet for cold forming. Technical delivery conditions |
| BS EN 10143:1993 | Continuously hot-dip metal coated steel sheet and strip. Tolerances on dimensions and shape |
| BS EN 10143:2006 | Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape |
| BS EN 10147:1992 | Specification for continuously hot-dip zinc coated structural steel sheet and strip. Technical delivery conditions |
| BS EN 10147:2000 | Continuously hot-dip zinc coated structural steels strip and sheet. Technical delivery conditions |
| BS EN 10149-1:1996 | Specification for hot-rolled flat products made of high yield strength steels for cold forming. General delivery conditions |
| BS EN 10149-2:1996 | Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for thermomechanically rolled steels |
| BS EN 10149-3:1996 | Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for normalized or normalized rolled steels |
| BS EN 10152:1994 | Specification for electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions |
| BS EN 10152:2003 | Electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions |
| BS EN 10152:2009 | Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions |
| BS EN 10154:1996 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10154:2002 | Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
| BS EN 10163-1:1991 | Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections. General requirements |
| BS EN 10163-1:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. General requirements |
| BS EN 10163-2:1991 | Specification for delivery requirements for surface condition of hot rolled steel plates, wide flats and sections. Plates and wide flats |
| BS EN 10163-2:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Plate and wide flats |
| BS EN 10165:1996 | Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state |
| BS EN 10169-1:1997 | Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods) |
| BS EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods) |
| BS EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products. Products for building exterior applications |
| BS EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products. Products for building interior applications |
| BS EN 10202:1990 | Specification for cold reduced electrolytic chromium/chromium oxide coated steel |
| BS EN 10202:2001 | Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel |
| BS EN 10203:1991 | Specification for cold reduced electrolytic tinplate |
| BS EN 10205:1992 | Specification for cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel |
| BS EN 10209:1996 | Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions |
| BS EN 10214:1995 | Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10215:1995 | Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet. Technical delivery conditions |
| BS EN 10246-15:2000 | Non-destructive testing of steel tubes. Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections |
| BS EN 10258:1997 | Cold-rolled stainless steel narrow strip and cut lengths. Tolerances on dimensions and shape |
| BS EN 10259:1997 | Cold-rolled stainless and heat resisting steel wide strip and plate/sheet. Tolerances on dimensions and shape |
| BS EN 10268:1999 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming. General delivery conditions |
| BS EN 10268:2006 | Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions |
| BS EN 10271:1999 | Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions |
| BS EN 10292:2000 | Continuously hot-dip coated strip and sheet of steels with higher yield strength for cold forming. Technical delivery conditions |
| BS EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming. Technical delivery conditions |
| BS EN 10303:2001 | Thin magnetic steel sheet and strip for use at medium frequencies |
| BS EN 10307:2001 | Non-destructive testing. Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
| BS EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions |
| BS EN 10327:2004 | Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions |
| BS EN 10336:2007 | Continuously hot-dip coated and electrolytically coated strip and sheet of multiphase steels for cold forming. Technical delivery conditions |
| BS EN 10341:2006 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
| BS EN 10342:2005 | Magnetic materials. Classification of surface insulations of electrical steel sheet, strip and laminations |
| BS EN 10346:2009 | Continuously hot-dip coated steel flat products. Technical delivery conditions |
| BS EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements |
| BS EN 14783:2006 | Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements |
| BS EN 502:2000 | Roofing products from metal sheet. Specification for fully supported products of stainless steel sheet |
| BS EN 505:2000 | Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet |
| BS EN 508-1:2000 | Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Steel |
| BS EN ISO 9445:2006 | Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form |
| BS ISO 13887:2004 | Cold-reduced steel sheet of higher yield strength with improved formability |
| BS ISO 13976:2005 | Hot-rolled steel sheet in coils of structural quality and heavy thickness |
| BS ISO 14788:2005 | Continuous hot-dip zinc-5% aluminium alloy coated steel sheet |
| BS ISO 16160:2005 | Continuously hot-rolled steel sheet products. Dimensional and shape tolerances |
| BS ISO 16162:2005 | Continuously cold-rolled steel sheet products. Dimensional and shape tolerances |
| BS ISO 16163:2005 | Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances |
| BS ISO 16172:2006 | Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe |
| BS ISO 17577:2006 | Steel. Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm |
| BS ISO 20805:2005 | Hot-rolled sheet steel in coils of higher yield strength with improved formability and heavy thickness for cold forming |
| BS ISO 3575:2005 | Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities |
| BS ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
| BS ISO 4997:2007 | Cold-reduced carbon steel sheet of structural quality |
| BS ISO 4998:2005 | Continuous hot-dip zinc-coated carbon steel sheet of structural quality |
| BS ISO 4999:2005 | Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities |
| BS ISO 5950:2008 | Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| BS ISO 5952:2005 | Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance |
| BS ISO 5954:2007 | Cold-reduced carbon steel sheet according to hardness requirements |
| DD ENV 10169-2:1999 | Continuously organic coated (coil coated) steel flat products. Products for building exterior applications |
