| BS 1902-10.1:1993 | Methods of testing refractory materials. Investment casting shell mould systems. Determination of resistance to deformation at elevated temperatures |
| BS 1902-10.2:1994 | Methods of testing refractory materials. Investment casting shell mould systems. Determination of permeability and standard air flow capacity at elevated temperatures. Section 10.2: Determination of permeability and standard air flow capacity at elevated temperatures |
| BS 1902-11:1991 | Methods of testing refractory materials. Refractory mortars and putties |
| BS 1902-2.2:1974 | Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of chrome-bearing materials |
| BS 1902-2.3:Addendum No. 1:1976 | Methods of testing refractory materials. Chemical analysis (wet methods). Determination of boron in magnesites |
| BS 1902-3.0:1988 | Methods of testing refractory materials. General and textural properties. Introduction |
| BS 1902-3.10:1981 | Methods of testing refractory materials. General and textural properties. Determination of resistance to carbon monoxide (method 1902-310) |
| BS 1902-3.11:1983 | Methods of testing refractory materials. General and textural properties. Measurement of dimensions and shape of refractory bricks and blocks (methods 1902-311) |
| BS 1902-3.13:1996* ISO 12678-2:1996 | Methods of testing refractory materials. General and textural properties. Measurement of dimensions and external defects of refractory bricks. Corner and edge defects and other surface imperfections |
| BS 1902-3.14:1996 | Methods of testing refractory materials. General and textural properties. Determination of hydration tendency |
| BS 1902-3.16:1990 | Methods of testing refractory materials. General and textural properties. Determination of pore size distribution (method 1902-316) |
| BS 1902-3.17:1990 | Methods of testing refractory materials. General and textural properties. Determination of volume and bulk density of dense shaped products (methods 1902-317) |
| BS 1902-3.19:1996* ISO 12678-1:1996 | Methods of testing refractory materials. General and textural properties. Measurement of dimensions and external defects of refractory bricks. Dimensions and conformity to drawings |
| BS 1902-3.1:1981 | Methods of testing refractory materials. General and textural properties. Guidance on sampling |
| BS 1902-3.2:1981 | Methods of testing refractory materials. General and textural properties. Measurement of dimensions of specimens for testing (methods 1902-302) |
| BS 1902-3.3:1981 | Methods of testing refractory materials. General and textural properties. Sieve analysis (methods 1902-303) |
| BS 1902-3.5:1981 | Methods of testing refractory materials. General and textural properties. Determination of powder density (method 1902-305) |
| BS 1902-4.0:1985 | Methods of testing refractory materials. Properties measured under an applied stress. Introduction |
| BS 1902-4.3:1985 | Methods of testing refractory materials. Properties measured under an applied stress. Determination of cold crushing strength of dense shaped products (method 1902-403) |
| BS 1902-4.5:1984 | Methods of testing refractory materials. Properties measured under an applied stress. Determination of modulus of rupture at elevated temperatures (method 1902-405) |
| BS 1902-4.6:1985 | Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406) |
| BS 1902-5.0:1992 | Methods of testing refractory materials. Refractory and thermal properties. Introduction |
| BS 1902-5.11:1986 | Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal spalling resistance by the prism test (method 1902-511) |
| BS 1902-5.13:1984 | Methods of testing refractory materials. Refractory and thermal properties. Determination of resistance to attack by slag (method 1902-513) |
| BS 1902-5.14:1992 | Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (temperatures up to 1500°C) (methods 1902-5.14) |
| BS 1902-5.3:1990 | Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (horizontal method to 1100°C) (method 1902-503) |
| BS 1902-5.4:1989 | Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (for large test pieces) (method 1902-504) |
| BS 1902-5.5:1991 | Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (panel/calorimeter method) (method 1902-505) |
| BS 1902-5.8:1992 | Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (split column method) (method 1902-508) |
| BS 1902-5.9:1985 | Methods of testing refractory materials. Refractory and thermal properties. Determination of permanent change in dimensions on heating of shaped insulating products (method 1902-509) |
| BS 1902-6:1986 | Methods of testing refractory materials. Ceramic fibre products |
| BS 1902-7.0:1987 | Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Introduction and definitions |
| BS 1902-7.1:1987 | Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Guidance on sampling (of unshaped refractories) |
| BS 1902-7.2:1987 | Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Testing of material as supplied and received (method 1902-702) |
| BS 1902-7.3:1987 | Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from dense castables by vibration (method 1902-703) |
| BS 1902-7.4:1987 | Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from insulating castables (method 1902-704) |
| BS 1902-7.5:1987 | Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Preparation of test pieces from mouldables and ramming mixes (method 1902-705) |
| BS 1902-7.6:1987 | Methods of testing refractory materials. Unshaped refractories used in monolithic construction. Testing of materials as preformed test pieces |
| BS 1902-9.1:1987 | Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence |
| BS 1902-9.2:1987 | Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of silica refractories by X-ray fluorescence |
| BS 1902-9.3:1998 | Methods of testing refractory materials. Chemical analysis by instrumental methods. Determination of chromium (VI) |
| BS 1902:Part 2:Section 2.1:1988 | Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of refractories containing silica and/or alumina |
| BS 1902:Part 2:Section 2.3:1970 | Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of magnesites and dolomites |
| BS 1902:Part 3:Section 3.12:1989* ISO 8890:1988 | Methods of testing refractory materials. General and textural properties. Determination of resistance to sulphuric acid (powders) (method 1902-312) |
| BS 1902:Part 3:Section 3.13:1985 | Methods of testing refractory materials. General and textural properties. Measurement of corner and edge defects and other surface imperfections of refractory bricks and blocks (attributive properties) (method 1902-313) |
| BS 1902:Part 3:Section 3.14:1987 | Methods of testing refractory materials. General and textural properties. Determination of hydration tendency (methods 1902-314) |
| BS 1902:Part 3:Section 3.4:1981 | Methods of testing refractory materials. General and textural properties. Determination of true density (method 1902-304) |
| BS 1902:Part 3:Section 3.6:1984 | Methods of testing refractory materials. General and textural properties. Determination of grain density (methods 1902-306) |
| BS 1902:Part 3:Section 3.7:1989* ISO 5016:1986 | Methods of testing refractory materials. General and textural properties. Determination of bulk density and true porosity of shaped insulating products (method 1902-307) |
| BS 1902:Part 3:Section 3.8:1989* ISO 5017:1988 | Methods of testing refractory materials. General and textural properties. Determination of bulk density, true porosity and apparent porosity of dense shaped products (method 1902-308) |
| BS 1902:Part 3:Section 3.9:1981 | Methods of testing refractory materials. General and textural properties. Determination of permeability to gases (method 1902-309) |
| BS 1902:Part 4:Section 4.10:1990* ISO 3187:1989 | Methods of testing refractory materials. Properties measured under an applied stress. Determination of creep in compression (method 1902-410) |
| BS 1902:Part 4:Section 4.1:1984 | Methods of testing refractory materials. Properties measured under an applied stress. Determination of the cold crushing strength of shaped insulating refractory products (method 1902-401) |
| BS 1902:Part 4:Section 4.4:1984 | Methods of testing refractory materials. Properties measured under an applied stress. Determination of modulus of rupture at ambient temperature (method 1902-404) |
| BS 1902:Part 4:Section 4.7:1985 | Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at elevated temperature up to 1400°C (abradability index at elevated temperatures) (method 1902-407) |
| BS 1902:Part 4:Section 4.9:1985 | Methods of testing refractory materials. Properties measured under an applied stress. Determination of refractoriness-under-load (rising temperature test: differential method) (method 1902-409) |
| BS 1902:Part 5:Section 5.10:1986 | Methods of testing refractory materials. Refractory and thermal properties. Determination of permanent change in dimensions on heating of dense shaped products (methods 1902-510) |
| BS 1902:Part 5:Section 5.2:1983 | Methods of testing refractory materials. Refractory and thermal properties. Determination of pyrometric cone equivalent (refractoriness) (method 1902-502) |
| BS 1902:Part 5:Section 5.6:1985 | Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (hot wire method) (method 1902-506) |
| BS 1902:Part 8:1988 | Methods of testing refractory materials. Refractories containing carbon |
| BS 3056-1:1985 | Sizes of refractory bricks. Specification for multi-purpose bricks |
| BS 3056-2:1985 | Sizes of refractory bricks. Specification for bricks for use in glass-melting furnaces |
| BS 3056-3:1986 | Sizes of refractory bricks. Specification for bricks for rotary cement kilns |
| BS 3056-4:1985* ISO 5019-4:1984 | Sizes of refractory bricks. Specification for bricks for electric arc furnace roofs |
| BS 3056-7:1992 | Sizes of refractory bricks. Specification for basic bricks for steel making |
| BS 3056-8:1987 | Sizes of refractory bricks. Specification for bricks for ladles |
| BS 3446-1:1990 | Glossary of terms associated with refractory materials. General and manufacturing |
| BS 3446-2:1990 | Glossary of terms associated with refractory materials. Applications in the coke, glass, cement and other non-metallurgical industries |
| BS 3446-3:1990 | Glossary of terms associated with refractory materials. Applications in the metallurgical industries |
| BS 4966:1991 | Specification for silica refractories for use in coke ovens |
| BS 6065:1981* ISO 5022-1979 | Methods for sampling and acceptance testing of shaped refractory products |
| BS 6434:1984 | Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products' |
| BS 6886:1987 | Specification for alumino-silicate refractories for use in coke ovens |
| BS 7225-2.1:1990 | Classification of refractories. Unshaped refractory products. Alumina, silica and alumino-silicate products |
| BS 7225-2.2:1990 | Classification of refractories. Unshaped refractory products. Basic products |
| BS 7225-3.1:1990 | Classification of refractories. Ceramic fibre products. Blankets, mats, felts and paper |
| BS 7225:Part 1:Section 1.1:1989 | Classification of refractories. Shaped refractory products Insulating products |
| BS 7225:Part 1:Section 1.2:1989 | Classification of refractories. Shaped refractory products Alumina, silica and alumino-silicate products |
| BS 7225:Part 1:Section 1.3:1989 | Classification of refractories. Shaped refractory products Basic products containing less than 7% carbon |
| BS 7225:Part 1:Section 1.4:1989 | Classification of refractories. Shaped refractory products Basic products containing more than 7% carbon |
| BS 7243-1:1989* ISO 8656-1:1988 | Refractory raw materials. Method of sampling |
| BS 7335-1:1991 | Installation of monolithic refractories. Code of practice for installation by casting |
| BS 7335-2:1991 | Installation of monolithic refractories. Code of practice for installation by gunning |
| BS EN 1094-1:1997 | Insulating refractory products. Terminology for ceramic fibre products |
| BS EN 1094-1:2008 | Insulating refractory products. Terminology, classification and methods of test for high temperature insulation wool products |
| BS EN 1094-2:1999 | Insulating refractory products. Classification of shaped products |
| BS EN 1094-3:2003 | Insulating refractory products. Classification of insulating products made from ceramic fibres |
| BS EN 1094-4:1995 | Insulating refractory products. Determination of bulk density and true porosity |
| BS EN 1094-5:1995 | Insulating refractory products. Determination of cold crushing strength |
| BS EN 1094-6:2000* BS 1902-5.9:2000 | Insulating refractory products. Determination of permanent change in dimensions of shaped products on heating |
| BS EN 12475-1:1998* BS 7225-1.2:1998 | Classification of dense shaped refractory products. Alumina-silica products |
| BS EN 12475-2:1998* BS 7225-1.3:1998 | Classification of dense shaped refractory products. Basic products containing less than 7% residual carbon |
| BS EN 12475-3:1998* BS 7225-1-1.4:1998 | Classification of dense shaped refractory products. Basic products containing from 7% to 30% residual carbon |
| BS EN 12475-4:1999 | Classification of dense shaped refractory products. Special products |
| BS EN 12698-1:2007 | Chemical analysis of nitride bonded silicon carbide refractories. Chemical methods |
| BS EN 12698-2:2007 | Chemical analysis of nitride bonded silicon carbide refractories. XRD methods |
| BS EN 1402-1:2003 | Unshaped refractory products. Introduction and classification |
| BS EN 1402-2:2003 | Unshaped refractory products. Sampling for testing |
| BS EN 1402-3:2003 | Unshaped refractory products. Characterization as received |
| BS EN 1402-4:2003 | Unshaped refractory products. Determination of consistency of castables |
| BS EN 1402-5:2003 | Unshaped refractory products. Preparation and treatment of test pieces |
| BS EN 1402-6:2003 | Unshaped refractory products. Measurement of physical properties |
| BS EN 1402-7:2003 | Unshaped refractory products. Tests on pre-formed shapes |
| BS EN 1402-8:2003 | Unshaped refractory products. Determination of complementary properties |
| BS EN 14945:2005 | Refractory products and materials. Spectrometric determination of chromium (VI) in chrome bearing refractories, before and after use |
| BS EN 955-2:1995* BS 1902-2.1:1995 | Chemical analysis of refractory products. Products containing silica and/or alumina (wet method) |
| BS EN 993-10:1998* BS 1902-5.10:1998 | Methods of test for dense shaped refractory products. Determination of permanent change in dimensions on heating |
| BS EN 993-11:2007 | Methods of test for dense shaped refractory products. Determination of resistance to thermal shock |
| BS EN 993-12:1997* BS 1902-5.2:1997 | Methods of test for dense shaped refractory products. Determination of pyrometric cone equivalent (refractoriness) |
| BS EN 993-13:1995 | Methods of test for dense shaped refractory products. Specification for pyrometric reference cones for laboratory use |
| BS EN 993-14:1998* BS 1902-5.6:1998 | Methods of test for dense shaped refractory products. Determination of thermal conductivity by the hot-wire (cross-array) method |
| BS EN 993-15:1998 | Methods of test for dense shaped refractory products. Determination of thermal conductivity by the hot-wire (parallel) method |
| BS EN 993-15:2005 | Methods of test for dense shaped refractory products. Determination of thermal conductivity by the hot wire (parallel) method |
| BS EN 993-16:1995 | Methods of test for dense shaped refractory products. Determination of resistance to sulfuric acid |
| BS EN 993-17:1999 | Methods of test for dense shaped refractory products. Determination of bulk density of granular materials by the mercury method with vacuum |
| BS EN 993-18:2002 | Methods of test for dense shaped refractory products. Determination of bulk density of granular materials by the water method with vacuum |
| BS EN 993-19:2004 | Methods of test for dense shaped refractory products. Determination of thermal expansion by a differential method |
| BS EN 993-1:1995* BS 1902-3.8:1995 | Methods of test for dense shaped refractory products. Determination of bulk density, apparent porosity and true porosity |
| BS EN 993-20:2004 | Methods of test for dense shaped refractory products. Determination of resistance to abrasion at ambient temperature |
| BS EN 993-2:1995* BS 1902-3.4:1995 | Methods of test for dense shaped refractory products. Determination of true density |
| BS EN 993-3:1997 | Methods of test for dense shaped refractory products. Test methods for carbon-containing refractories |
| BS EN 993-4:1995* BS 1902-3.9:1995 | Methods of test for dense shaped refractory products. Determination of permeability to gases |
| BS EN 993-5:2000* BS 1902-4.3:2000 | Methods of test for dense shaped refractory products. Determination of cold crushing strength |
| BS EN 993-6:1995* BS 1902-4.4:1995 | Methods of test for dense shaped refractory products. Determination of modulus of rupture at ambient temperature |
| BS EN 993-7:2000* BS 1902-4.5:2000 | Methods of test for dense shaped refractory products. Determination of modulus of rupture at elevated temperatures |
| BS EN 993-8:1997 | Methods of test for dense shaped refractory products. Determination of refractoriness-under-load |
| BS EN 993-9:1997 | Methods of test for dense shaped refractory products. Determination of creep in compression |
| BS EN ISO 10058-1:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Apparatus, reagents, dissolution and determination of gravimetric silica |
| BS EN ISO 10058-2:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Wet chemical analysis |
| BS EN ISO 10058-3:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method). Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) |
| BS EN ISO 10058:1996 | Magnesites and dolomites. Chemical analysis |
| BS EN ISO 10081-1:2005 | Classification of dense shaped refractory products. Alumina-silica |
| BS EN ISO 10081-2:2005 | Classification of dense shaped refractory products. Basic products containing less than 7 % residual carbon |
| BS EN ISO 10081-3:2005 | Classification of dense shaped refractory products. Basic products containing from 7% to 50% residual carbon |
| BS EN ISO 12676:2003 | Refractory products. Determination of resistance to carbon monoxide |
| BS EN ISO 12677:2003 | Chemical analysis of refractory products by XRF. Fused cast bead method |
| BS EN ISO 12680-1:2007 | Methods of test for refractory products. Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration |
| BS EN ISO 16282:2008 | Methods of test for dense shaped refractory products. Determination of resistance to abrasion at ambient temperature |
| BS EN ISO 1893:2008 | Refractory products. Determination of refractoriness under load. Differential method with rising temperature |
| BS EN ISO 20182:2008 | Refractory testpiece preparation. Gunning refractory panels by the pneumatic-nozzle mixing type guns |
| BS EN ISO 20565-1:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Apparatus, reagents, dissolution and determination of gravimetric silica |
| BS EN ISO 20565-2:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Wet chemical analysis |
| BS EN ISO 20565-3:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method). Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) |
| BS EN ISO 21068-1:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products. General information and sample preparation |
| BS EN ISO 21068-2:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products. Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon |
| BS EN ISO 21068-3:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products. Determination of nitrogen, oxygen and metallic and oxidic constituents |
| BS EN ISO 21078-2:2007 | Determination of boron (III) oxide in refractory products. Acid extraction method for the determination of boron (III) oxide in binder components |
| BS EN ISO 21079-1:2008 | Chemical analysis of refractories containing alumina, zirconia and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method). Apparatus, reagents and dissolution |
| BS EN ISO 21079-2:2008 | Chemical analysis of refractories containing alumina, zirconia, and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method). Wet chemical analysis |
| BS EN ISO 21079-3:2008 | Chemical analysis of refractories containing alumina, zirconia, and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method). Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP-AES) |
| BS EN ISO 21587-1:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method). Apparatus, reagents dissolution and gravimetric silica |
| BS EN ISO 21587-2:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method). Wet chemical analysis |
| BS EN ISO 21587-3:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method). Inductively coupled plasma and atomic absorption spectrometry methods |
| BS EN ISO 26845:2008 | Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods |
| BS EN ISO 8895:2006 | Shaped insulating refractory products. Determination of cold crushing strength |
| BS ISO 10059-2:2003 | Dense shaped refractory materials. Determination of cold compressive strength. Test with packing |
| BS ISO 10081-4:2007 | Classification of dense shaped refractory products. Special products |
| BS ISO 10635:1999 | Refractory products. Methods of test for ceramic fibre products |
| BS ISO 13765-1:2004 | Refractory mortars. Determination of consistency using the penetrating cone method |
| BS ISO 13765-2:2004 | Refractory mortars. Determination of consistency using the reciprocating flow table method |
| BS ISO 13765-3:2004 | Refractory mortars. Determination of joint stability |
| BS ISO 13765-4:2004 | Refractory mortars. Determination of flexural bonding strength |
| BS ISO 13765-5:2004 | Refractory mortars. Determination of grain size distribution (sieve analysis) |
| BS ISO 13765-6:2004 | Refractory mortars. Determination of the moisture content of ready-mixed mortars |
| DD CEN/TS 993-11:2003 | Dense shaped refractory products. Determination of resistance to thermal shock |
| DD ENV 1094-3:1998 | Insulating refractory products. Classification of ceramic fibre products |
| DD ENV 1094-7:1994 | Insulating refractory products. Methods of test for ceramic fibre products |
| DD ENV 1402-1:1995 | Unshaped refractory products. Introduction and definitions |
| DD ENV 1402-2:1997 | Unshaped refractory products. Sampling for testing |
| DD ENV 1402-3:1999 | Unshaped refractory products. Characterization as received |
| DD ENV 1402-4:2000 | Unshaped refractory products. Determination of consistency of castables |
| DD ENV 1402-5:2000 | Unshaped refractory products. Preparation and treatment of test pieces |
| DD ENV 1402-6:1998 | Unshaped refractory products. Measurement of physical properties |
| DD ENV 1402-7:1998 | Unshaped refractory products. Tests for preformed shapes |
| DD ENV 1402-8:1999 | Unshaped refractory products. Determination of complementary properties |
| DD ENV 820-2:1994 | Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties. Determination of self-loaded deformation |
| DD ENV 955-4:1997 | Chemical analysis of refractory products. Products containing silica and/or alumina (Analysis by flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrography (ICP)) |
| DD ENV 993-11:1997 | Methods of test for dense shaped refractory products. Determination of resistance to thermal shock |
