IHS Logo IHS - The Source for Critical Information and Insight BSi Logo
British Standards Online Heading
How to subscribe to British Standards Online
  Need a quote from IHS?
  The British Standards Online service is available via subscription from IHS. To speak to an expert about this service, please call:
+44 (0)1344 328300 or complete the
form below

Request an IHS quote for
British Standards Online
 
IHS Logo

BSi Logo
The following lists the key subject areas for this British Standards module.
Click the links to view the associated British Standards for each area.

Home >
Rubber industry ( Module 44 ) >

Rubber, Rubber industry ( Module 44 )
BS 1154:1992Specification for natural rubber compounds
BS 1154:2003Natural rubber compounds. Specification
BS 1155:1992Specification for natural rubber compounds for extrusion
BS 1155:2003Natural rubber compounds for extrusion. Specification
BS 1673:Part 9:1973Methods of test for raw rubber and unvulcanized compounded rubber. Chemical analysis of butadiene rubber
BS 1674:1991Specification for equipment and general procedure for mixing and vulcanizing rubber test mixes
BS 2044:1984Methods for determination of resistivity of conductive and antistatic plastics and rubbers (laboratory methods)
BS 2050:1978Specification for electrical resistance of conducting and antistatic products made from flexible polymeric material
BS 2751:1990Specification for general purpose acrylonitrile-butadiene rubber compounds
BS 2751:2001General purpose acrylonitrile-butadiene rubber compounds. Specification
BS 2752:1990Specification for chloroprene rubber compounds
BS 2752:2003Chloroprene rubber compounds. Specification
BS 2782-3:Method 365A:1976Methods of testing plastics. Mechanical properties. Determination of softness number of flexible plastics materials
BS 3227:1990Specification for butyl rubber compounds (including halobutyl compounds)
BS 3227:2003Butyl rubber compounds (including halobutyl compounds). Specification
BS 3397:1976Methods of test for synthetic rubber latices
BS 3502:Part 2:1991Symbols for plastics and rubber materials. Schedule for symbols for rubbers
BS 3558-1:1997* ISO 1382:1996Glossary of rubber terms. International terms
BS 3558-2:2001Glossary of rubber terms. Additional British terms
BS 3558:1980Glossary of rubber terms
BS 4181-1:1985* ISO 4650-1984Identification of rubbers by infra-red spectrometry. Method for identification of hydrocarbon, chloroprene, nitrile and chlorosulphonated polyethylene rubbers
BS 4255-1:1986Rubber used in preformed gaskets for weather exclusion from buildings. Specification for non-cellular gaskets
BS 4470:1987* ISO 2302-1985Method for evaluation of vulcanization characteristics of isobutene-isoprene rubber (IIR)
BS 4470:1996* ISO 2302:1995Method for evaluation of vulcanization characteristics of isobutene-isoprene rubber (IIR)
BS 5047:1990* ISO 2476:1988Method for evaluation of solution-polymerized types of butadiene rubber (BR)
BS 5047:1997* ISO 2476:1996Method for evaluation of solution-polymerized types of butadiene rubber (BR)
BS 5176:1975Specification for classification system for vulcanized rubbers
BS 5176:2003Classification system for vulcanized rubbers. Specification
BS 5214:Part 1:1975Specification for testing machines for rubbers and plastics. Constant rate of traverse machines
BS 5294:1976Method of test. Determination of crystallization effects in rubbers by hardness measurements
BS 5324:1976Guide to application of statistics to rubber testing
BS 5375:1992* ISO 2475:1990Method for evaluation of general purpose chloroprene rubber (CR)
BS 5421-1:1976* ISO 2321-1975Methods of test for elastomeric threads. Rubber threads
BS 5421-2:1978Methods of test for elastomeric threads. Polyurethane thread (elastane yarn)
BS 5474:1991* ISO 2303:1990Method for evaluation of non-oil-extended solution-polymerized isoprene rubber (IR)
BS 5563:1990* ISO 4659:1989Method for evaluation of styrene-butadiene rubber (SBR) masterbatches with carbon black or carbon black and oil
BS 5923-2:1980Methods for chemical analysis of rubber. EDTA titrimetric method for determination of zinc content of rubber products
BS 5923:Part 3:1981Methods for chemical analysis of rubber. Determination of volatile matter content of raw rubbers
BS 6014:1991Specification for ethylene propylene rubber compounds
BS 6014:2003Ethylene propylene rubber compounds. Specification
BS 6057-3.5:1996* ISO 127:1995Rubber latices. Methods of test. Determination of KOH number of natural rubber latices
BS 6057-3.9:1996* ISO 976:1996Rubber latices. Methods of test. Determination of pH
BS 6057:Part 0:1981Rubber latices. General introduction
BS 6057:Part 3:Section 3.10:1987* ISO 1409-1983 Rubber latices. Methods of test. Determination of surface tension
BS 6057:Part 3:Section 3.1:1990* ISO 35:1989Rubber latices. Methods of test. Determination of mechanical stability of natural rubber latex concentrate
BS 6057:Part 3:Section 3.4:1990* ISO 126:1989Rubber latices. Methods of test. Determination of dry rubber content of natural rubber latices
BS 6057:Part 3:Section 3.5:1985* ISO 127-1984Rubber latices. Methods of test. Determination of KOH number of natural rubber latices
BS 6057:Part 3:Section 3.7:1982* ISO 705-1974Rubber latices. Methods of test. Determination of density of natural rubber latices
BS 6057:Part 3:Section 3.9:1990* ISO 976:1986Rubber latices. Determination of pH
BS 6063:1992* ISO 4097:1991Method for evaluation of general purpose ethylene-propylene-diene rubber (EPDM)
BS 6064:1992* ISO 4658:1990Method for evaluation of acrylonitrile-butadiene rubber (NBR)
BS 6315:1993* ISO 1795:1992Methods for sampling and further preparative procedures for raw, natural and synthetic rubber
BS 6505:1984Specification for rubber-type materials used for controls components for use with 1st, 2nd and 3rd family gases
BS 6630:1985* ISO 4645-1984Method for identification of antidegradants in rubber and rubber products by thin layer chromatography
BS 6716:1986Guide to properties and types of rubber
BS 6845:1987Method for evaluation of vulcanization characteristics of halogenated isobutene-isoprene rubber (BIIR and CIIR)
BS 6845:1996* ISO 7663:1995Method for evaluation of vulcanization characteristics of halogenated isobutene-isoprene rubber (BIIR and CIIR)
BS 6995:1988* ISO 2322-1985Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)
BS 6995:1997* ISO 2322:1996Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)
BS 6996:1989Specification for mineral oil resistant acrylonitrile-butadiene rubber compounds
BS 6996:2003Mineral oil resistant acrylonitrile-butadiene rubber compounds. Specification
BS 7164-10:1994Chemical tests for raw and vulcanized rubber. Method for preparation and examination of water extract
BS 7164-11.1:1994Chemical tests for raw and vulcanized rubber. Butadiene rubber. Method for determination of microstructure
BS 7164-11.2:1993Chemical tests for raw and vulcanized rubber. Butadiene rubber. Method for determination of unsaturation
BS 7164-12:1991* ISO 2453:1991Chemical tests for raw and vulcanized rubber. Determination of bound styrene content of raw styrene-butadiene rubber; emulsion polymerized: refractive index method
BS 7164-13:1994Chemical tests for raw and vulcanized rubber. Method for determination of total hydrocarbon content
BS 7164-14:1996* ISO 1408:1995Chemical tests for raw and vulcanized rubber. Methods for determination of carbon black content
BS 7164-15.1:1994* ISO 9924-1:1993Chemical tests for raw and vulcanized rubber. Method for thermogravimetric determination of the composition of vulcanizates and uncured compounds. Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS 7164-2.2:1990* ISO 4661-2:1987Chemical tests for raw and vulcanized rubber. Sample preparation. Vulcanized rubber
BS 7164-22.1:1994Chemical tests for raw and vulcanized rubber. Determination of chlorine content. Parr bomb method
BS 7164-22.2:1992* ISO 7725:1991Chemical tests for raw and vulcanized rubber. Determination of chlorine content. Oxygen flask combustion technique for determination of bromine and chlorine
BS 7164-23.1:1993* ISO 6528-1:1992Chemical tests for raw and vulcanized rubber. Methods for determination of total sulfur content. Oxygen combustion flask method
BS 7164-24:1996* ISO 7269:1995Chemical tests for raw and vulcanized rubber. Determination of free sulfur
BS 7164-26.1:1997* ISO 6101-4:1997Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content. Atomic absorption spectrometry
BS 7164-27.1:1991* ISO 6101-5:1990Chemical tests for raw and vulcanized rubber. Methods for determination of iron content. Atomic absorption spectrometry
BS 7164-27.2:1990* ISO 1657:1986Chemical tests for raw and vulcanized rubber. Methods for determination of iron content. Photometric method
BS 7164-28.1:1997* ISO 6101-3:1997Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Atomic absorption spectrometry
BS 7164-28.2:1995* ISO 8053:1995Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Photometric method
BS 7164-29.1:1992* ISO 6101-1:1991Chemical tests for raw and vulcanized rubber. Methods for determination of zinc content. Atomic absorption spectrometry
BS 7164-30.1:1997* ISO 6101-2:1997Chemical tests for raw and vulcanized rubber. Methods for determination of lead content. Atomic absorption spectrometry
BS 7164-31.1:1997* ISO 11089:1997Chemical tests for raw and vulcanized rubber. Determination of anti-degradants. High-performance liquid chromatography
BS 7164-32.1:1998* ISO 10398:1998Chemical tests for raw and vulcanized rubber. Methods for determination of accelerators. Gas and thin layer chromatography
BS 7164-3:1992* ISO 1407:1992Chemical tests for raw and vulcanized rubber. Methods for determination of solvent extract
BS 7164-4:1990* ISO 9028:1989Chemical tests for raw and vulcanized rubber. Methods for dissolution of rubber by acid digestion
BS 7164-5:1991* ISO 247:1990Chemical tests for raw and vulcanized rubber. Methods for determination of ash content
BS 7164-6.1:1994Chemical tests for raw and vulcanized rubber. Methods for determination of volatile matter. Raw rubber
BS 7164-7.1:1990* ISO 5945:1989Chemical tests for raw and vulcanized rubber. Methods for determination of polymer content. Polyisoprene content
BS 7164-8:1996* ISO 249:1995Chemical tests for raw and vulcanized rubber. Method for determination of dirt content of raw natural rubber
BS 7164:Part 14:1990* ISO 1408:1987Chemical tests for raw and vulcanized rubber. Methods for determination of carbon black content
BS 7164:Part 21:1990* ISO 1656:1988Chemical tests for raw and vulcanized rubber. Determination of nitrogen content
BS 7164:Part 24:1990* ISO 7269:1987Chemical tests for raw and vulcanized rubber. Determination of extractable sulphur
BS 7164:Part 25:1990* ISO 8054:1988Chemical tests for raw and vulcanized rubber. Method for determination of sulphide sulphur content
BS 7164:Part 26:Section 26.1:1990* ISO 6101-4:1988 Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content. Atomic absorption spectrometry
BS 7164:Part 26:Section 26.2:1990* ISO 7780:1987 Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content. Sodium periodate photometric methods
BS 7164:Part 28:Section 28.1:1990* ISO 6101-3:1988 Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Atomic absorption spectrometry
BS 7164:Part 28:Section 28.2:1990* ISO 8053:1986 Chemical tests for raw and vulcanized rubber. Methods for determination of copper content. Photometric method
BS 7164:Part 30:Section 30.1:1990* ISO 6101-2:1986 Chemical tests for raw and vulcanized rubber. Methods for determination of lead content. Atomic absorption spectrometry
BS 7164:Part 8:1990* ISO 249:1987Chemical tests for raw and vulcanized rubber. Method for determination of dirt content of raw natural rubber
BS 7164:Part 9:1990* ISO 7781:1986Chemical tests for raw and vulcanized rubber. Method for determination of soap and organic acid content in raw styrene-butadiene rubber
BS 7596:1992* ISO 4660:1991Method for determination of colour of raw natural rubber (colour index test)
BS 7918-1:1999Visual imperfections in rubber products. Vocabulary
BS 903-0:1990Physical testing of rubber. Introduction
BS 903-0:2003Physical testing of rubber. General
BS 903-1:1995Physical testing of rubber. Guide to the selection and use of methods of test for rubber
BS 903-2:1997Physical testing of rubber. Guide to the application of statistics to rubber testing
BS 903-3:2003Physical testing of rubber. Acquisition and presentation of comparable single-point data
BS 903-4:2003Physical testing of rubber. Acquisition and presentation of comparable multi-point data
BS 903-5:2004Physical testing of rubber. Guide to the application of rubber testing to finite element analysis
BS 903-A10:1984* ISO 132-1983Physical testing of rubber. Determination of flex cracking (De Mattia)
BS 903-A11:1985* ISO 133-1983Physical testing of rubber. Determination of crack growth (De Mattia)
BS 903-A12:1995* ISO 36:1993Physical testing of rubber. Method for determination of the adhesion strength to textile fabric
BS 903-A13:1990* ISO 1432:1988Physical testing of rubber. Method for determination of stiffness at low temperature (Gehman test)
BS 903-A14:1992Physical testing of rubber. Method for determination of modulus in shear or adhesion to rigid plates. Quadruple shear method
BS 903-A15:1990* ISO 8013:1988Physical testing of rubber. Method for determination of creep in compression or shear
BS 903-A18:1973Physical testing of rubber. Determination of equilibrium water vapour absorption
BS 903-A1:1996* ISO 2781:1988Physical testing of rubber. Determination of density
BS 903-A21.1:1997* ISO 813:1997Physical testing of rubber. Determination of rubber to metal bond strength. Adhesion to rigid substrates. 90° peel method
BS 903-A21.2:1997* ISO 814:1996Physical testing of rubber. Determination of rubber to metal bond strength. Two plate method
BS 903-A25:1992* ISO 812:1991Physical testing of rubber. Determination of low-temperature brittleness
BS 903-A26:1995* ISO 48:1994Physical testing of rubber. Method for determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS 903-A27:1986* ISO 4637:1979Physical testing of rubber. Determination of rubber to fabric adhesion. Direct tension method
BS 903-A29:1997* ISO 2921:1997Physical testing of rubber. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
BS 903-A2:1995* ISO 37:1994Physical testing of rubber. Method for determination of tensile stress-strain properties
BS 903-A3.2:1997* ISO 34-2:1996Physical testing of rubber. Determination of tear strength Small (Delft) test pieces
BS 903-A30:1996* ISO 2782:1995Physical testing of rubber. Determination of permeability to gases
BS 903-A31:1976Physical testing of rubber. Determination of the low-frequency dynamic properties of rubbers by means of a torsion pendulum
BS 903-A32:1988* ISO 3383:1985Physical testing of rubber. General directions for achieving elevated or subnormal temperatures for test purposes
BS 903-A35:1995* ISO 471:1995Physical testing of rubber. Temperatures, humidities and times for conditioning and testing of test pieces
BS 903-A36:1995* ISO 4661-1:1993Physical testing of rubber. Method for preparation of samples and test pieces
BS 903-A37:1997* ISO 6505:1997Physical testing of rubber. Determination of tendency to adhere to and to corrode metals
BS 903-A38:1991* ISO 4648:1991Physical testing of rubber. Methods for the determination of dimensions of test pieces and products for test purposes
BS 903-A3:1995* ISO 34-1:1994Physical testing of rubber. Method for determination of tear strength (trouser, angle and crescent test pieces)
BS 903-A40:1988* ISO 5600:1986Physical testing of rubber. Determination of adhesion to rigid materials using conical shaped parts
BS 903-A42:1992* ISO 3384:1991Physical testing of rubber. Method for determination of stress relaxation in compression at ambient and at elevated temperatures
BS 903-A43:1990* ISO 1431-1:1989Physical testing of rubber. Method for determination of resistance to ozone cracking (static strain test)
BS 903-A44:1995* ISO 1431-2:1994Physical testing of rubber. Method of determination of resistance to ozone cracking (dynamic strain test)
BS 903-A48:1984* ISO 4647:1982Methods of testing vulcanized rubber. Determination of static adhesion to textile cord (H-pull test)
BS 903-A49:1984* ISO 4666-1:1982Physical testing of rubber. Determination of temperature rise and resistance to fatigue in flexometer testing (basic principles)
BS 903-A4:1990* ISO 7743:1989Physical testing of rubber. Determination of compression stress-strain properties
BS 903-A50:1984* ISO 4666-3:1982Methods of testing vulcanized rubber. Determination of temperature rise and resistance to fatigue in flexometer testing (compression flexometer)
BS 903-A51:1986* ISO 6943:1984Methods of testing vulcanized rubber. Determination of resistance to tension fatigue
BS 903-A52:1986* ISO 6914:1985Physical testing of rubber. Determination of ageing characteristics by measurement of stress at a given elongation
BS 903-A53:1989* ISO 4665-2:1985Physical testing of rubber. Methods for exposure to natural weathering, for use in determining resistance to weathering
BS 903-A54:1989* ISO 4665-3:1987Physical testing of rubber. Methods for exposure to artificial light, for use in determining resistance to weathering
BS 903-A55:1989* ISO 4665-1:1985Physical testing of rubber. Methods for assessment of changes in properties after exposure to natural weathering or artificial light, for use in determining resistance to weathering
BS 903-A56:1989* ISO 5603:1986Physical testing of rubber. Determination of adhesion to wire cord
BS 903-A57:1997* ISO 7619:1997Physical testing of rubber. Determination of indentation hardness by means of pocket hardness meters
BS 903-A58.1:2001* ISO 289-3:1999Physical testing of rubber. Methods using the Mooney viscometer. Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR. Determination of the Delta Mooney value for non-pigmented, oil-extended, emulsion-polymerized SBR
BS 903-A58:1990Physical testing of rubber. Methods using the Mooney viscometer
BS 903-A59.1:1997* ISO 2007:1991Physical testing of rubber. Methods using plastimeters. Determination of the rapid plasticity number
BS 903-A5:1997* ISO 2285:1997Physical testing of rubber. Determination of tension set at normal and high temperatures
BS 903-A60.1:1996Physical testing of rubber. Curemetering. Guide to the use of curemeters
BS 903-A60.1:2000* BS ISO 6502:1999Physical testing of rubber. Curemetering. Guide to the use of curemeters
BS 903-A60.2:1992* ISO 3417:1991Physical testing of rubber. Curemetering. Method for the determination of vulcanization characteristics using an oscillating disc curemeter
BS 903-A61:1994Physical testing of rubber. Determination of the frictional properties of rubber
BS 903-A62:1993* ISO 9026:1991Physical testing of rubber. Method for determination of green strength of raw rubber of unvulcanized compounds
BS 903-A63:1995* ISO 3387:1994Physical testing of rubber. Method for determination of crystallization effects by hardness measurements
BS 903-A64:1995* ISO 2393:1994Physical testing of rubber. Method for the preparation, mixing and vulcanization of rubber test mixes
BS 903-A6:1992* ISO 815:1991Physical testing of rubber. Method for determination of compression set at ambient, elevated or low temperatures
BS 903-A8:1990Physical testing of rubber. Method for determination of rebound resilience
BS 903-A9:1988Physical testing of rubber. Determination of abrasion resistance
BS 903-C1:1991* BS 2782-2:Method 231A:1991Physical testing of rubber. Determination of surface resistivity
BS 903-C2:1982* BS 2782-2:Method 230A:1982Physical testing of rubber. Determination of volume resistivity
BS 903-C5:1992* BS 2782-2:Method 232:1992* IEC 60167:1964Physical testing of rubber. Determination of insulation resistance
BS 903:Part A12:1975Physical testing of rubber. Determination of the adhesion strength of vulcanized rubbers to fabrics (ply adhesion)
BS 903:Part A16:1987* ISO 1817-1985Physical testing of rubber. Determination of the effect of liquids
BS 903:Part A17:1973Physical testing of rubber. Determination of the permeability of rubber to gases (constant volume method)
BS 903:Part A19:1986* ISO 188-1982Physical testing of rubber. Heat resistance and accelerated ageing tests
BS 903:Part A1:1980* ISO 2781-1975Physical testing of rubber. Determination of density
BS 903:Part A21:1989Physical testing of rubber. Determination of rubber to metal bond strength
BS 903:Part A24:1992Physical testing of rubber. Guide to the determination of dynamic properties of rubbers
BS 903:Part A26:1969Physical testing of rubber. Determination of hardness
BS 903:Part A29:1984* ISO 2921-1982Physical testing of rubber. Determination of low temperature characteristics by temperature-retraction procedure (TR test)
BS 903:Part A2:1971Methods of testing vulcanized rubber. Determination of tensile stress-strain properties
BS 903:Part A30:1975Physical testing of rubber. Determination of the permeability of rubber to gases (constant pressure method)
BS 903:Part A33:1985* ISO 3865-1983Physical testing of rubber. Methods of test for staining in contact with organic materials
BS 903:Part A35:1985* ISO 471-1983Physical testing of rubber. Temperatures, humidities and times for conditioning and testing of test pieces
BS 903:Part A36:1988* ISO 4661/1-1986Physical testing of rubber. Preparation of samples and test pieces
BS 903:Part A37:1987Physical testing of rubber. Determination of adhesion to and corrosion of metals
BS 903:Part A3:1982* ISO 34-1979Physical testing of rubber. Determination of tear strength (trouser, angle and crescent test pieces)
BS 903:Part A44:1983* ISO 1431/2-1982Physical testing of rubber. Determination of resistance to ozone cracking (dynamic strain test)
BS 903:Part A46:1991* ISO 6179:1989Physical testing of rubber. Method for determination of the transmission rate of volatile liquids
BS 903:Part A47:1982* ISO 6133-1981Physical testing of rubber. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS 903:Part A57:1989* ISO 7619-1986Physical testing of rubber. Determination of indentation hardness by means of pocket hardness meters
BS 903:Part A59:1990Physical testing of rubber. Methods using plastimeters
BS 903:Part A5:1993* ISO 2285:1988Physical testing of rubber. Method for determination of tension set at normal and high temperatures
BS 903:Part B19:1958Methods of testing vulcanized rubber. Preparation and examination of water extract
BS 903:Part C3:1982* BS 2782-2:Meth 240A&240B:1982 Methods of testing vulcanized rubber. Determination of loss tangent and permittivity at power and audio frequencies
BS 903:Part C4:1983* BS 2782-2:Methods 220 and 221 Physical testing of rubber. Determination of electric strength
BS 903:Parts B11 & B12:1960Physical testing of rubber. Rubber (polymer) determinations
BS 903:Parts B6 to B10:1958Physical testing of rubber. Determination of sulphur
BS EN 278:1991Specification for rubber materials for diaphragms in domestic appliances using combustible gases up to 200 mbar
BS EN 279:1991Specification for homogenous rubber materials for dynamic seals in domestic appliances using combustible gases up to 200 mbar
BS EN 549:1995Specification for rubber materials for seals and diaphragms for gas appliances and gas equipment
BS EN 681-1:1996Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber
BS EN ISO 75-2:1996* BS 2782-1:Methods 121A to 121C * ISO 75-2:1993Plastics. Determination of temperature of deflection under load. Plastics and ebonite
BS EN ISO 75-2:2004Plastics. Determination of temperature of deflection under load. Plastics and ebonite
BS ISO 11345:1997* BS 903-A65:1998Rubber. Assessment of carbon black dispersion. Rapid comparative methods
BS ISO 11345:2006Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods
BS ISO 12000:1996Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Definitions and review of test methods
BS ISO 12000:2000Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Definitions and review of test methods
BS ISO 12965:2000Butadiene rubber. Determination of microstructure by infra-red spectrometry
BS ISO 13226:1999Rubber. Standard reference elastomers (SRE's) for characterizing the effect of liquids on vulcanized rubbers
BS ISO 13226:2005Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
BS ISO 132:1999* BS 903-A10:1999Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
BS ISO 132:2005Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
BS ISO 1382:2002Rubber. Vocabulary
BS ISO 1382:2008Rubber. Vocabulary
BS ISO 1431-1:2004Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
BS ISO 1431-3:2000* BS 903-A45:2000Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Reference and alternative methods for determining the ozone concentration in laboratory test chambers
BS ISO 1434:1995Natural rubber in bales. Amount of bale coating. Determination
BS ISO 14558:2000Rubber. Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy
BS ISO 15113:1999* BS 903-A61:2000Rubber. Determination of frictional properties
BS ISO 15113:2005Rubber. Determination of frictional properties
BS ISO 15671:2000Rubber and rubber additives. Determination of total sulfur content using an automatic analyser
BS ISO 15672:2000Rubber and rubber additives. Determination of total nitrogen content using an automatic analyser
BS ISO 1629:1995+A1:2007Rubber and lattices. Nomenclature
BS ISO 16565:2002Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
BS ISO 16565:2008Rubber. Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
BS ISO 17564:2001Nitrile rubber. Determination of residual unsaturation in hydrogenated nitrile rubber (HNBR) by iodine value
BS ISO 17564:2008Raw hydrogenated nitrile rubber (HNBR). Determination of residual unsaturation by iodine value
BS ISO 1795:2000Rubber, raw natural and raw synthetic. Sampling and further preparative procedures
BS ISO 1817:1999* BS 903-A16:1999Rubber, vulcanized. Determination of the effect of liquids
BS ISO 1817:2005Rubber, vulcanized. Determination of the effect of liquids
BS ISO 1827:2007Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
BS ISO 18517:2005Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
BS ISO 18898:2006Rubber. Calibration and verification of hardness testers
BS ISO 18899:2004Rubber. Guide to the calibration of test equipment
BS ISO 188:1998* BS 903-A19:1998Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS ISO 188:2007Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS ISO 19003:2006Rubber and rubber products. Guidance on the application of statistics to physical testing
BS ISO 2007:2007Rubber, unvulcanized. Determination of plasticity. Rapid-plastimeter method
BS ISO 21561:2005Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR
BS ISO 2230:2002Rubber products. Guidelines for storage
BS ISO 22768:2006Rubber, raw. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
BS ISO 2285:2001Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
BS ISO 2285:2007Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
BS ISO 2302:2005Isobutene-isoprene rubber (IIR). Evaluation procedures
BS ISO 2303:2003Isoprene rubber (IR). Non-oil-extended, solution-polymerized types. Evaluation procedure
BS ISO 23529:2004Rubber. General procedures for preparing and conditioning test pieces for physical test methods
BS ISO 23794:2003Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
BS ISO 24453:2008Rubber. Acquisition and presentation of comparable single-point data
BS ISO 24454:2008Rubber. Acquisition and presentation of comparable multi-point data
BS ISO 2475:1999Chloroprene rubber (CR). General-purpose types. Evaluation procedure
BS ISO 247:2006Rubber. Determination of ash
BS ISO 27588:2008Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
BS ISO 2781:2008Rubber, vulcanized or thermoplastic. Determination of density
BS ISO 2782:2006Rubber, vulcanized or thermoplastic. Determination of permeability to gases
BS ISO 2878:2005Rubber. Antistatic and conductive products. Determination of electrical resistance
BS ISO 289-1:2005Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of Mooney viscosity
BS ISO 289-4:2003Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of the Mooney stress-relaxation rate
BS ISO 2921:2005Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
BS ISO 3384:1999* BS 903-A42:1999Rubber, vulcanized or thermoplastic. Determination of stress relaxation in compression at ambient and at elevated temperatures
BS ISO 3384:2005Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures
BS ISO 34-1:2004Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces
BS ISO 34-2:2007Rubber, vulcanized or thermoplastic. Determination of tear strength. Small (Delft) test pieces
BS ISO 36:1999* BS 903-A12:1999Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabric
BS ISO 36:2005Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics
BS ISO 37:2005Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
BS ISO 3865:1997* BS 903-A33:1998Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS ISO 3865:2005Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material
BS ISO 4097:2000Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
BS ISO 4097:2007Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
BS ISO 4649:2002Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device
BS ISO 4650:2005Rubber. Identification. Infrared spectrometric method
BS ISO 4658:1999Acrylonitrile-butadiene rubber (NBR). Evaluation procedure
BS ISO 4659:1997Rubber, styrene-butadiene (carbon or carbon black and oil masterbatches). Evaluation procedure
BS ISO 4659:2003Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
BS ISO 4664-1:2005Rubber, vulcanized or thermoplastic. Determination of dynamic properties. General guidance
BS ISO 4664-2:2006Rubber, vulcanized or thermoplastic. Determination of dynamic properties. Torsion pendulum methods at low frequencies
BS ISO 4664:1998Rubber. Guide to the determination of dynamic properties
BS ISO 4665:1998Rubber, vulcanized and thermoplastic. Resistance to weathering
BS ISO 4665:2006Rubber, vulcanized or thermoplastic. Resistance to weathering
BS ISO 4666-4:2007Rubber, vulcanized. Determination of temperature rise and resistance to fatigue in flexometer testing. Constant-stress flexometer
BS ISO 48:2007Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 5600:2007Rubber. Determination of adhesion to rigid materials using conical shaped parts
BS ISO 5603:2007Rubber, vulcanized. Determination of adhesion to wire cord
BS ISO 6101-5:2006Rubber. Determination of metal content by atomic absorption spectrometry. Determination of iron content
BS ISO 6133:1998Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
BS ISO 6505:2005Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals
BS ISO 6914:2008Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension
BS ISO 6943:2007Rubber, vulcanized. Determination of tension fatigue
BS ISO 7270-1:2003Rubber. Analysis by pyrolytic gas-chromatographic methods. Identification of polymers (single polymers and polymer blends)
BS ISO 7270-2:2005Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
BS ISO 7619-1:2004+A1:2008Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS ISO 7619-2:2004Rubber, vulcanized or thermoplastic. Determination of indentation hardness. IRHD pocket meter method
BS ISO 7663:2005Halogenated isobutene-isoprene rubber (BIIR and CIIR). Evaluation procedures
BS ISO 7743:2004Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS ISO 7743:2008Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS ISO 7780:1998* BS 7164-26.2:1998Rubber and rubber latices. Determination of manganese content. Sodium periodate photometric methods
BS ISO 8013:2006Rubber, vulcanized. Determination of creep in compression or shear
BS ISO 812:2006Rubber, vulcanized or thermoplastic. Determination of low-temperature brittleness
BS ISO 814:2007Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method
BS ISO 815-1:2008Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
BS ISO 815-2:2008Rubber, vulcanized or thermoplastic. Determination of compression set. At low temperatures
BS ISO 9026:2007Raw rubber or unvulcanized compounds. Determination of green strength
BS ISO 9028:2006Rubber. Dissolution by acid digestion
BS ISO 9924-1:2000Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers
BS ISO 9924-2:2000Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Acrylonitrile-butadiene and halobutyl rubbers
PD ISO/TR 7620:2005Rubber materials. Chemical resistance
IHS experience – your advantage

IHS, formerly known as Technical Indexes, is one of the foremost providers of standards, regulatory, product and supplier information to industries worldwide including construction, health & safety, engineering, education, rail, energy, automotive, defence and many more. With over 45 years experience and more than 6000 customers based in the UK alone, IHS is the only company of its type providing access to several million pages of vital information.

The British Standard Service provided by IHS focuses on supplying you an established, authoritative, reliable and comprehensive information source.

How to subscribe to British Standards Online