| BS 1133-14:1985 | Packaging code. Adhesive closing and sealing tapes |
| BS 1133-16:1987 | Packaging code. Adhesives for packaging |
| BS 1203:1979 | Specification for synthetic resin adhesives (phenolic and aminoplastic) for plywood |
| BS 1203:2001 | Hot-setting phenolic and aminoplastic wood adhesives. Classification and test method |
| BS 1204:1993 | Specification for type MR phenolic and aminoplastic synthetic resin adhesives for wood |
| BS 3046:1981 | Specification for adhesives for hanging flexible wallcoverings |
| BS 3544:1962 | Methods of test for polyvinyl acetate adhesives for wood |
| BS 3887:1991 | Specification for pressure sensitive adhesive closing and sealing tapes |
| BS 4071:1966 | Specification for polyvinyl acetate (PVA) emulsion adhesives for wood |
| BS 5131-1.1:1991 | Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to heat (creep test) |
| BS 5131-1.2:1991 | Methods of test for footwear and footwear materials. Adhesives. Resistance of adhesive joints to peeling |
| BS 5131-1.3:1991 | Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests |
| BS 5131-1.4:1979 | Methods of test for footwear and footwear materials. Adhesives. Heat activation life of adhesives |
| BS 5131-1.6:1979 | Methods of test for footwear and footwear materials. Adhesives. Recommended environmental storage conditions for adhesive joints prior to heat resistance or peeling tests |
| BS 5131-1.7:1991 | Methods of test for footwear and footwear materials. Adhesives. Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests |
| BS 5131-1.8:1981 | Methods of test for footwear and footwear materials. Adhesives. Rate of bond strength development in shear of hot melt adhesives for lasting |
| BS 5131-1.9:1985 | Methods of test for footwear and footwear materials. Adhesives. Measurement of green strength of adhesive joints |
| BS 5131-5.4:1978 | Methods of test for footwear and footwear materials. Testing of complete footwear. Sole bond peeling strength |
| BS 5350-0:1987 | Methods of test for adhesives. General introduction |
| BS 5350-A1:1976 | Methods of test for adhesives. Adherends. Adherend preparation |
| BS 5350-A2:1990 | Methods of test for adhesives. Adherends. Guide to the selection of adherend materials |
| BS 5350-B1:1978 | Methods of test for adhesives. Determination of density |
| BS 5350-B2:1976 | Methods of test for adhesives. Adhesives. Determination of solids content |
| BS 5350-B4:1993* ISO 10364:1993 | Methods of test for adhesives. Adhesives. Determination of pot life |
| BS 5350-B5:1976 | Methods of test for adhesives. Determination of gelation time |
| BS 5350-B8:1990 | Methods of test for adhesives. Adhesives. Determination of viscosity |
| BS 5350-B9:1984 | Methods of test for adhesives. Adhesives. Determination of resistance to sagging (flow after application) |
| BS 5350-C12:1994* ISO 11339:1993 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests. 180° peel test for flexible-to-flexible bonded assemblies (T-peel test) |
| BS 5350-C13:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Climbing drum peel test |
| BS 5350-C14:1979 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests. 90° peel test for a rigid-to-rigid assembly |
| BS 5350-C15:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in compressive shear |
| BS 5350-C1:1986 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of cleavage strength of adhesive bonds |
| BS 5350-C5:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in longitudinal shear |
| BS 5350-C5:2002 | Methods of test for adhesives. Determination of bond strength in longitudinal shear for rigid adherends |
| BS 5350-C6:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of bond strength in direct tension in sandwich panels |
| BS 5350-C7:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of creep and resistance to sustained application of force |
| BS 5350-D4:1976 | Methods of test for adhesives. Adhesively bonded joints: environmental tests. Determination of staining potential |
| BS 5350-E1:1976 | Methods of test for adhesives. Sampling and analysis of test data. Guide to statistical analysis |
| BS 5350-E2:1979 | Methods of test for adhesives. Sampling and analysis of test data. Guide to sampling |
| BS 5350-F1:1983 | Methods of test for adhesives. Tests for flooring adhesives. Performance tests for flooring adhesives |
| BS 5350-G2:1987 | Methods of test for adhesives. Tests on anaerobic adhesives. Determination of static shear strength of anaerobic adhesives |
| BS 5350-G3:1987 | Methods of test for adhesives. Determination of ability of anaerobic adhesives to set on metal surfaces |
| BS 5350-H1:1981 | Methods of test for adhesives. Determination of heat stability of hot melt adhesives in the application equipment |
| BS 5350-H2:1982 | Methods of test for adhesives. Physical tests on hot-melt adhesives. Determination of low temperature flexibility or cold crack temperature |
| BS 5350-H3:1984 | Methods of test for adhesives. Physical tests on hot-melt adhesives. Determination of heat resistance of hot-melt adhesives |
| BS 5350-H4:1984 | Methods of test for adhesives. Physical tests on hot-melt adhesives. Determination of maximum open time of hot-melt adhesives (oven method) |
| BS 5350:Part C4:1986 | Methods of test for adhesives. Determination of impact resistance of adhesive bonds |
| BS 5350:Part C9:1990 | Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Floating roller peel test |
| BS 5350:Part G1:1987 | Methods of test for adhesives. Tests on anaerobic adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners |
| BS 5442-1:1989 | Classification of adhesives for construction. Classification of adhesives for use with flooring materials |
| BS 5442-2:1989 | Classification of adhesives for construction. Classification of adhesives for use with interior wall and ceiling coverings (excluding decorative flexible materials in roll form) |
| BS 5442-3:1979 | Classification of adhesives for construction. Adhesives for use with wood |
| BS 5980:1980 | Specification for adhesives for use with ceramic tiles and mosaics |
| BS 6138:1989 | Glossary of terms used in the adhesives industry |
| BS 7116:1990 | Specification for double sided pressure sensitive adhesive tapes |
| BS 745:1969 | Specification for animal glue for wood (joiners's glue) (dry glue; jelly or liquid glue) |
| BS 7969:2004 | Adhesives. Ethyl and methyl cyanoacrylate types 1,2 and 3 |
| BS 7991:2001 | Determination of the mode I adhesive fracture energy, GIC, of structural adhesives using the double cantilever beam (DCB) and tapered double cantilever beam (TDCB) specimens |
| BS EN 1066:1998 | Adhesives. Sampling |
| BS EN 1067:1998 | Adhesives. Examination and preparation of samples for testing |
| BS EN 1067:2005 | Adhesives. Examination and preparation of samples for testing |
| BS EN 12002:1998 | Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts |
| BS EN 12002:2002 | Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts |
| BS EN 12002:2008 | Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts |
| BS EN 12003:1998 | Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives |
| BS EN 12003:2008 | Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives |
| BS EN 12004:2001 | Adhesives for tiles. Definitions and specifications |
| BS EN 12004:2007 | Adhesives for tiles. Requirements, evaluation of conformity, classification and designation |
| BS EN 12023:1997 | Self adhesive tapes. Measurement of water vapour transmission in a warm humid atmosphere |
| BS EN 12024:1997 | Self adhesive tapes. Measurement of resistance to elevated temperature and humidity |
| BS EN 12025:1997 | Self adhesive tapes. Measurement of tear resistance by the pendulum method |
| BS EN 12026:1997 | Self adhesive tapes. Measurement of the unwinding force at high speed |
| BS EN 12027:1997 | Self adhesive tapes. Measurement of flame resistance |
| BS EN 12028:1997 | Self adhesive tapes. Measurement of elongation under static load |
| BS EN 12029:1997 | Self adhesive tapes. Determination of the water-soluble corrosive ions |
| BS EN 12030:1997 | Self adhesive tapes. Measurement of impact resistance |
| BS EN 12031:1997 | Self-adhesive tapes. Measurement of bursting strength |
| BS EN 12032:1997 | Self-adhesive tapes. Measurement of bonding of thermosetting adhesive tapes during curing |
| BS EN 12033:1997 | Self-adhesive tapes. Measurement of bonding of thermosetting adhesive tapes after curing |
| BS EN 12034:1997 | Self-adhesive tapes. Measurement of the length of a roll of adhesive tape |
| BS EN 12035:1997 | Self-adhesive tapes. Flagging of adhesive tape |
| BS EN 12036:1997 | Self-adhesive tapes. Solvent penetration into adhesive masking tapes |
| BS EN 12092:2001 | Adhesives. Determination of viscosity |
| BS EN 1238:1999 | Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball) |
| BS EN 1239:1998 | Adhesives. Freeze-thaw stability |
| BS EN 1240:1998 | Adhesives. Determination of hydroxyl value and/or hydroxyl content |
| BS EN 1241:1998 | Adhesives. Determination of acid value |
| BS EN 1242:1998 | Adhesives. Determination of isocyanate content |
| BS EN 1242:2005 | Adhesives. Determination of isocyanate content |
| BS EN 12436:2002 | Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements |
| BS EN 1243:1999 | Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates |
| BS EN 1244:1998 | Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| BS EN 1245:1999 | Adhesives. Determination of pH. Test method |
| BS EN 1246:1998 | Adhesives. Determination of ash and sulfated ash |
| BS EN 12481:2001 | Self adhesive tapes. Terminology |
| BS EN 12701:2001 | Structural adhesives. Storage. Determination of words and phrases relating to the product life of structural adhesives and related materials |
| BS EN 12702:2000 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of blocking behaviour of potentially adhesive layers |
| BS EN 12703:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature |
| BS EN 12704:2000 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of foam formation for aqueous adhesives |
| BS EN 12705:2000 | Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration |
| BS EN 12706:2000 | Adhesives. Test methods for hydraulic setting floor smoothing and/or levelling compounds. Determinatiion of flow characteristics |
| BS EN 12765:2001 | Classification of thermosetting wood adhesives for non-structural applications |
| BS EN 12808-1:1999 | Adhesives and grouts for tiles. Determination of chemical resistance of reaction resin mortars |
| BS EN 12808-1:2008 | Grouts for tiles. Determination of chemical resistance of reaction resin mortars |
| BS EN 12808-2:2002 | Adhesives and grouts for tiles. Determination of resistance to abrasion |
| BS EN 12808-4:2009 | Grouts for tiles. Determination of shrinkage |
| BS EN 12960:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of shear resistance |
| BS EN 12961:2001 | Adhesives for leather and footwear materials. Determination of optimum activation temperatures and maximum activation life of solvent-based and dispersion adhesives |
| BS EN 12962:2001 | Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index) |
| BS EN 12963:2001 | Adhesives. Determination of free monomer content in adhesives based on synthetic polymers |
| BS EN 12964:2001 | Adhesives for leather and footwear materials. Lasting adhesives. Testing heat resistance of bonds at increasing temperature |
| BS EN 1308:1999 | Adhesives for tiles. Determination of slip |
| BS EN 1308:2007 | Adhesives for tiles. Determination of slip |
| BS EN 1322:1999 | Adhesives for tiles. Definitions and terminology |
| BS EN 1323:1999 | Adhesives for tiles. Concrete slab for test |
| BS EN 1323:2007 | Adhesives for tiles. Concrete slabs for tests |
| BS EN 1324:1999 | Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives |
| BS EN 1324:2007 | Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives |
| BS EN 13415:2002 | Adhesives. Test of adhesives for floor coverings. Determination of the electrical resistance of adhesive films |
| BS EN 1346:1999 | Adhesives for tiles. Determination of open time |
| BS EN 1346:2007 | Adhesives for tiles. Determination of open time |
| BS EN 1347:1999 | Adhesives for tiles. Determination of wetting capability |
| BS EN 1347:2007 | Adhesives for tiles. Determination of wetting capability |
| BS EN 1348:1999 | Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives |
| BS EN 1348:2007 | Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives |
| BS EN 1372:2000 | Adhesives. Test method for adhesives for floor and wall coverings. Peel test |
| BS EN 1373:2000 | Adhesives. Test method for adhesives for floor and wall coverings. Shear test |
| BS EN 13887:2003 | Structural adhesives. Guidelines for surface preparation of metals and plastics prior to adhesive bonding |
| BS EN 1391:1998 | Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification |
| BS EN 1392:1998 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Test methods for measuring the bond strength under specified conditions |
| BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
| BS EN 13999-1:2006 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure |
| BS EN 13999-2:2007 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds |
| BS EN 13999-3:2007+A1:2009 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile aldehydes |
| BS EN 13999-4:2007+A1:2009 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile diisocyanates |
| BS EN 14022:2003 | Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives |
| BS EN 14173:2002 | Structural adhesives. T-peel test for flexible-to-flexible bonded assemblies |
| BS EN 14256:2007 | Adhesives for non-structural wood applications. Test method and requirements for resistance to static load |
| BS EN 14257:2006 | Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
| BS EN 14258:2004 | Structural adhesives. Mechanical behaviour of bonded joints subjected to short and long terms exposure at specified conditions of temperature |
| BS EN 14259:2003 | Adhesives for floor covering. Requirements for mechanical and electrical performance |
| BS EN 14292:2005 | Adhesives. Wood adhesives. Determination of static load resistance with increasing temperature |
| BS EN 14293:2006 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| BS EN 14294:2004 | Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes |
| BS EN 14410:2003 | Self adhesive tapes. Measurement of breaking strength and elongation at break |
| BS EN 14444:2005 | Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test |
| BS EN 14493:2002 | Structural adhesives. Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions Wedge impact method |
| BS EN 14510:2005 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
| BS EN 1464:1995 | Adhesives. Determination of peel resistance of high-strength adhesive bonds. Floating roller method |
| BS EN 1465:1995 | Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| BS EN 1465:2009 | Adhesives. Determination of tensile lap-shear strength of bonded assemblies |
| BS EN 14680:2006 | Adhesives for non-pressure thermoplastic piping systems. Specifications |
| BS EN 14713:2005 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding |
| BS EN 14814:2007 | Adhesives for thermoplastic piping systems for fluids under pressure. Specifications |
| BS EN 14869-1:2004 | Structural adhesives. Determination of shear behaviour of structural bonds. Torsion test method using butt-bonded hollow cylinders |
| BS EN 14869-2:2004 | Structural adhesives. Determination of shear behaviour of structural bonds. Thick adherends shear test |
| BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
| BS EN 15190:2007 | Structural adhesives. Test methods for assessing long term durability of bonded metallic structures |
| BS EN 15274:2007 | General purpose adhesives for structural assembly. Requirements and test methods |
| BS EN 15275:2007 | Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| BS EN 15307:2007 | Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
| BS EN 15336:2007 | Adhesives. Determination of the time to rupture of bonded joints under static load |
| BS EN 15337:2007 | Adhesives. Determination of shear of anaerobic adhesives using pin-and-collar specimens |
| BS EN 15416-2:2007 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Static load test of multiple bondline specimens in compression shear |
| BS EN 15416-3:2007 | Adhesives for load bearing timber structures. Test methods Creep deformation test at cyclic climate conditions with specimens loaded in bending shear |
| BS EN 15416-4:2006 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Determination of open assembly time for one component polyurethane adhesives |
| BS EN 15416-5:2006 | Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods. Determination of conventional pressing time |
| BS EN 15425:2008 | Adhesives. One component polyurethane for load bearing timber structures. Classification and performance requirements |
| BS EN 15865:2009 | Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners |
| BS EN 15870:2009 | Adhesives. Determination of tensile strength of butt joints |
| BS EN 1719:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure-sensitive adhesives. Determination of loop tack |
| BS EN 1720:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of dispersability |
| BS EN 1721:1999 | Adhesives for paper and board, packaging and disposable sanitary products. Tack measurement for pressure sensitive adhesives. Determination of rolling ball tack |
| BS EN 1799:1999 | Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface |
| BS EN 1841:1999 | Adhesives. Test methods for floor coverings and wall coverings. Determination of dimensional changes of a linoleum floor covering in contact with an adhesive |
| BS EN 1895:2001 | Adhesives for paper and board, packaging and disposable sanitary products. 180°. ""T"" peel test for a flexible-to-flexible assembly |
| BS EN 1896:2001 | Adhesives for paper and board, packaging and disposable sanitary products. Determination of tensile strength and elongation |
| BS EN 1902:1999 | Adhesives. Test methods for adhesives for floor coverings and wall coverings. Shear test |
| BS EN 1903:1999 | Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing |
| BS EN 1903:2008 | Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing |
| BS EN 1939:1997 | Self adhesive tapes. Measurement of peel adhesion from stainless steel or from its own backing |
| BS EN 1939:2003 | Self adhesive tapes. Determination of peel adhesion properties |
| BS EN 1940:1996 | Self adhesive tapes. Measurement of breaking strength |
| BS EN 1941:1996 | Self adhesive tapes. Measurement of elongation at break |
| BS EN 1942:1996 | Self adhesive tapes. Measurement of thickness |
| BS EN 1942:2003 | Self adhesive tapes. Measurement of thickness |
| BS EN 1942:2008 | Self adhesive tapes. Measurement of thickness |
| BS EN 1943:1996 | Self adhesive tapes. Measurement of static shear adhesion |
| BS EN 1943:2002 | Self adhesive tapes. Measurement of static shear adhesion |
| BS EN 1944:1996 | Self adhesive tapes. Measurement of unwind adhesion at low speed |
| BS EN 1945:1996 | Self adhesive tapes. Measurement of quick stick |
| BS EN 1965-1:2001 | Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate |
| BS EN 1965-2:2001 | Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate |
| BS EN 1966:2002 | Structural adhesives. Characterisation of a surface by measuring adhesion by means of the three point bending method |
| BS EN 1966:2009 | Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
| BS EN 1967:2002 | Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| BS EN 204:1991 | Classification of non-structural adhesives for joining of wood and derived timber products |
| BS EN 204:2001 | Classification of thermoplastic wood adhesives for non-structural applications |
| BS EN 205:1991 | Test methods for wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| BS EN 205:2003 | Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
| BS EN 26922:1993* ISO 6922:1987 | Adhesives. Determination of tensile strength of butt joints |
| BS EN 28510-1:1993* ISO 8510-1:1990 | Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 90° peel |
| BS EN 28510-2:1993* ISO 8510-2:1990 | Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. 180° peel |
| BS EN 29142:1993* ISO 9142:1990 | Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| BS EN 29653:1994* ISO 9653:1991 | Adhesives. Test method for shear impact strength of adhesive bonds |
| BS EN 301:1992 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures: classification and performance requirements |
| BS EN 301:2006 | Adhesives, phenolic and aminoplastic, for loading bearing timber structures. Classification and performance requirements |
| BS EN 302-1:1992 | Adhesives for load-bearing timber structures: test methods Determination of bond strength in longitudinal tensile shear |
| BS EN 302-1:2004 | Adhesives for load bearing timber structures. Test methods Determination of bond strength in longitudinal tensile shear strength |
| BS EN 302-2:1992 | Adhesives for load-bearing timber structures: test methods Determination of resistance to delamination (Laboratory method) |
| BS EN 302-2:2004 | Adhesives for load-bearing timber structures. Test methods Determination of resistance to delamination |
| BS EN 302-3:1992 | Adhesives for load-bearing timber structures: test methods Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| BS EN 302-3:2004 | Adhesives for load-bearing timber structures. Test methods Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| BS EN 302-4:1992 | Adhesives for load-bearing timber structures: test methods Determination of the effects of wood shrinkage on the shear strength |
| BS EN 302-4:2004 | Adhesives for load-bearing timber structures. Test methods Determination of the effects of wood shrinkage on the shear strength |
| BS EN 302-6:2004 | Adhesives for load-bearing timber structures. Test methods Determination of the conventional pressing time |
| BS EN 302-7:2004 | Adhesives for load-bearing timber structures. Test methods Determination of the conventional working life |
| BS EN 522:1998 | Adhesives for leather and footwear materials. Bond strength. Minimum requirements and adhesive classification |
| BS EN 542:1995 | Adhesives. Determination of density |
| BS EN 542:2003 | Adhesives. Determination of density |
| BS EN 543:1995 | Adhesives. Determination of apparent density of powder and granule adhesives |
| BS EN 543:2003 | Adhesives. Determination of apparent density of powder and granule adhesives |
| BS EN 827:1995 | Adhesives. Determination of conventional solids content and constant mass solids content |
| BS EN 827:2005 | Adhesives. Determination of conventional solids content and constant mass solids content |
| BS EN 828:1998 | Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface |
| BS EN 923:1998 | Adhesives. Terms and definitions |
| BS EN 923:2005+A1:2008 | Adhesives. Terms and definitions |
| BS EN 924:1995 | Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint |
| BS EN 924:2003 | Adhesives. Solvent-borne and solvent-free adhesives. Determination of flashpoint |
| BS EN ISO 10363:1995 | Hot-melt adhesives. Determination of thermal stability |
| BS EN ISO 10365:1995 | Adhesives. Designation of main failure patterns |
| BS EN ISO 10964:1997 | Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners |
| BS EN ISO 11339:2005 | Adhesives. T-peel test for flexible-to-flexible bonded assemblies |
| BS EN ISO 11343:2005 | Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge impact method |
| BS EN ISO 13445:2006 | Adhesives. Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method |
| BS EN ISO 14678:2005 | Adhesives. Determination of resistance to flow (sagging) |
| BS EN ISO 15605:2004 | Adhesives. Sampling |
| BS EN ISO 15908:2002 | Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives |
| BS EN ISO 9142:2003 | Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| BS EN ISO 9311-1:2005 | Adhesives for thermoplastics piping systems. Determination of film properties |
| BS EN ISO 9311-2:2002 | Adhesives for thermoplastic piping systems. Determination of shear strength |
| BS EN ISO 9311-3:2005 | Adhesives for thermoplastic piping systems. Test method for the determination of resistance to internal pressure |
| BS EN ISO 9653:2000 | Adhesives. Test method for shear strength of adhesive bonds |
| BS EN ISO 9664:1995 | Adhesives. Test methods for fatigue properties of structural adhesives in tensile shear |
| BS EN ISO 9665:1995 | Adhesives. Animal glues. Methods for sampling and testing |
| BS EN ISO 9665:2000 | Adhesives. Animal glues. Methods of sampling and testing (ISO 9665:1998) |
| BS ISO 11003-1:2001 | Adhesives. Determination of shear behaviour of structural adhesives. Torsion test method using butt-bonded hollow cylinders |
| BS ISO 11003-2:2001 | Adhesives. Determination of shear behaviour of structural adhesives. Tensile test method using thick adherends |
| BS ISO 14615:1997 | Adhesives. Durability of structural adhesive joints. Exposure to humidity and temperature under load |
| BS ISO 15166-1:1998 | Adhesives. Methods of preparing bulk specimens. Two-part systems |
| BS ISO 15166-2:2000 | Adhesives. Methods of preparing bulk specimens. Elevated-temperature-curing one-part systems |
| BS ISO 15509:2001 | Adhesives. Determination of the bond strength of engineering-plastic joints |
| BS ISO 17087:2006 | Specifications for adhesives used for finger joints in non-structural lumber products |
| BS ISO 17194:2007 | Structural adhesives. A standard database of properties |
| BS ISO 19212:2006 | Adhesives. Determination of temperature dependence of shear strength |
| BS ISO 21368:2005 | Adhesives. Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures |
| BS ISO 4587:2003 | Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
| BS ISO 6237:2003 | Adhesives. Wood-to-wood adhesive bonds. Determination of shear strength by tensile loading |
| DD ENV 13999-1:2001 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. General procedure |
| DD ENV 13999-2:2002 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile organic compounds |
| DD ENV 13999-3:2002 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile aldehydes |
| DD ENV 13999-4:2002 | Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application. Determination of volatile diisocyanates |
| DD ENV 1965-1:1996 | Structural adhesives. Corrosion. Determination and classification of corrosion to a copper substrate |
| DD ENV 1965-2:1996 | Structural adhesives. Corrosion. Determination and classification of corrosion to a brass substrate |
| DD ENV 1966:1996 | Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
| DD ENV 1967:1996 | Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| DD ENV 302-5:2002 | Adhesives for load-bearing timber structures. Test tethods Determination of the conventional assembly time |
| PD CEN/TR 14548:2003 | Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| PD CR 14376:2002 | Adhesives. Ahesives for paper and board, packaging and disposable sanitary products. Description and assessment of the setting process |
