| BS 1755-1:1982 | Glossary of terms used in the plastics industry. Polymer and plastics technology |
| BS 1755-2:1974 | Glossary of terms used in the plastics industry. Manufacturing processes |
| BS 2044:1984 | Methods for determination of resistivity of conductive and antistatic plastics and rubbers (laboratory methods) |
| BS 2782-0:1995 | Methods of testing plastics. Introduction |
| BS 2782-0:2004 | Methods of testing. Plastics. Introduction |
| BS 2782-1:Method 140A:1992* ISO 1210:1992 | Methods of testing plastics. Thermal properties. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source |
| BS 2782-1:Method 140C:1993* ISO 10351:1992 | Methods of testing plastics. Thermal properties. Determination of the combustibility of specimens using a 125 mm flame source |
| BS 2782-1:Method 140E:1982 | Methods of testing plastics. Thermal properties. Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method) |
| BS 2782-1:Method 150D:1976 | Methods of testing plastics. Thermal properties. Cold crack temperature of film and thin sheeting |
| BS 2782-1:Method 153A:1991* ISO 458-1:1985 | Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (general method) |
| BS 2782-1:Method 153B:1991* ISO 458-2:1985 | Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (method for vinyl chloride compounds) |
| BS 2782-1:Methods 143A and 143B:1989 | Methods of testing plastics. Thermal properties. Determination of flammability temperature of materials |
| BS 2782-3:Method 323A:1996* ISO 6721-4:1994 | Methods of testing plastics. Mechanical properties. Tensile vibration. Non-resonance method |
| BS 2782-3:Method 323B:1996* ISO 6721-5:1996 | Methods of testing plastics. Mechanical properties. Flexural vibration. Non-resonance method |
| BS 2782-3:Method 323C:1996* ISO 6721-6:1996 | Methods of testing plastics. Mechanical properties. Shear vibration. Non-resonance method |
| BS 2782-3:Method 323D:1996* ISO 6721-7:1996 | Methods of testing plastics. Mechanical properties. Torsional vibration. Non-resonance method |
| BS 2782-3:Method 323E:1997* ISO 6721-8:1997 | Methods of testing plastics. Mechanical properties. Longitudinal and shear vibration. Wave-propagation method |
| BS 2782-3:Method 323G:1997* ISO 6721-10:1997 | Methods of testing plastics. Mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer |
| BS 2782-3:Method 332A:1976 | Methods of testing plastics. Mechanical properties. Stiffness of plastics film |
| BS 2782-3:Method 346A:1984 | Methods of testing plastics. Mechanical properties. Determination of cohesion between layers of laminated tube |
| BS 2782-3:Method 365A:1976 | Methods of testing plastics. Mechanical properties. Determination of softness number of flexible plastics materials |
| BS 2782-3:Method 370:1996* ISO 9352:1995 | Methods of testing plastics. Mechanical properties. Determination of resistance to wear by abrasive wheels |
| BS 2782-3:Methods 320A to 320F:1976 | Methods of testing plastics. Mechanical properties. Tensile strength, elongation and elastic modulus |
| BS 2782-3:Methods 340A and 340B:1978 | Methods of testing plastics. Mechanical properties. Determination of shear strength of moulding material. Determination of shear strength of sheet material |
| BS 2782-4:Method 432D:1995 | Methods of testing plastics. Chemical properties. Determination of styrene evaporation from unsaturated polyester resins |
| BS 2782-4:Method 454G:1996* ISO 4576:1996 | Methods of testing plastics. Chemical properties. Polymer dispersions. Determination of sieve residue (gross particle and coagulum content) |
| BS 2782-5:Method 520A:1992 | Methods of testing plastics. Optical and colour properties weathering. Determination of specular gloss |
| BS 2782-5:Method 531A:1992* ISO 489:1983 | Methods of testing plastics. Optical and colour properties weathering. Determination of refractive index of transparent plastics |
| BS 2782-5:Method 540B:1982* ISO 4892:1981 | Methods of testing plastics. Optical and colour properties weathering. Methods of exposure to laboratory light sources, (xenon arc lamp, enclosed carbon arc lamp, open-flame carbon arc lamp, fluorescent tube lamps) |
| BS 2782-5:Method 540C:1988 | Methods of testing plastics. Optical and colour properties weathering. Determination of ultraviolet radiation intensity using polysulphone film |
| BS 2782-5:Method 540D:1995 | Methods of testing plastics. Optical and colour properties weathering. Methods of exposure to laboratory light sources. General guidance |
| BS 2782-5:Method 540G:1995* ISO 4892-4:1994 | Methods of testing plastics. Optical and colour properties weathering. Methods of exposure to laboratory light sources. Open flame carbon-arc lamps |
| BS 2782-5:Method 552A:1999* ISO 4582:1998 | Methods of testing plastics. Optical and colour properties weathering. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
| BS 2782-5:Methods 530A and 530B:1976 | Methods of testing plastics. Optical and colour properties weathering. Determination of yellowness index. Determination of the colour of near-white or near-colourless materials |
| BS 2782-6:Method 621C:1983* ISO 171:1980 | Methods of testing plastics. Dimensional properties. Determination of the bulk factor of moulding materials |
| BS 2782-6:Methods 620A to 620D:1991 | Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Methods 620A to 620D:Determination of density and relative density of non-cellular plastics |
| BS 2782-7:Method 722B:1996* ISO 11443:1995 | Methods of testing plastics. Rheological properties. Determination of the fluidity of plastics using capillary and slit-die rheometers |
| BS 2782-7:Method 740B:1996* ISO 1147:1995 | Methods of testing plastics. Rheological properties. Polymer dispersions and synthetic rubber latices. Freeze-thaw cycle stability test |
| BS 2782-7:Method 740C:1996* ISO 2115:1996 | Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature |
| BS 2782:Part 0:1992 | Methods of testing plastics. Introduction |
| BS 2782:Part 1:Method 140B:1993* ISO 9773:1990 | Methods of testing plastics. Thermal properties. Determination of the burning behaviour of flexible vertical specimens in contact with a small-flame ignition source |
| BS 2782:Part 1:Method 141:1986* ISO 4589-1984 | Methods of testing plastics. Thermal properties. Determination of flammability by oxygen index |
| BS 2782:Part 2:Method 250A:1976 | Methods of testing plastics. Electrical properties. Antistatic behaviour of film. Charge decay method |
| BS 2782:Part 2:Method 250B:1976 | Methods of testing plastics. Electrical properties. Antistatic behaviour of film. Electroscope method |
| BS 2782:Part 2:Method 250C:1976 | Methods of testing plastics. Electrical properties. Antistatic behaviour of film. Field window method |
| BS 2782:Part 3:Method 352D:1979 | Methods of testing plastics. Mechanical properties. Determination of falling weight impact resistance of thin flexible sheet (film) |
| BS 2782:Part 3:Method 365D:1991 | Methods of testing plastics. Mechanical properties. Determination of hardness by the ball indentation method |
| BS 2782:Part 3:Method 370:1990 | Methods of testing plastics. Mechanical properties. Determination of resistance to wear by abrasive wheels |
| BS 2782:Part 3:Methods 326A to 326C:1977 | Methods of testing plastics. Mechanical properties. Determination of tensile strength and elongation of plastics films |
| BS 2782:Part 4:Method 470A:1991* ISO 3451/1:1981 | Methods of testing plastics. Chemical properties. Determination of ash (general methods) |
| BS 2782:Part 4:Methods 430A to 430D:1983* ISO 62-1980 | Methods of testing plastics. Chemical properties. Determination of water absorption at 23°C with allowance for water-soluble matter |
| BS 2782:Part 5:Method 540A:1977* ISO 877-1976 | Methods of testing plastics. Optical and colour properties weathering. Determination of resistance to change upon exposure under glass to daylight |
| BS 2782:Part 5:Method 550A:1981* ISO 4607-1978 | Methods of testing plastics. Optical and colour properties weathering. Methods of exposure to natural weathering |
| BS 2782:Part 5:Method 552A:1981* ISO 4582-1980 | Methods of testing plastics. Optical and colour properties weathering. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light |
| BS 2782:Part 6:Method 620E:1980* ISO 1675-1975 | Methods of testing plastics. Dimensional properties. Determination of density of liquid resins by the pyknometer method |
| BS 2782:Part 7:Method 732A:1991* ISO 1628-1:1984 | Methods of testing plastics. Rheological properties. Determination of viscosity number:general conditions |
| BS 2782:Part 7:Method 733A:1991* ISO 307:1984 | Methods of testing plastics. Rheological properties. Determination of viscosity number of polyamides |
| BS 2782:Part 8:Method 820A:1992* ISO 2528:1974 | Methods of testing plastics. Other properties. Determination of water vapour transmission rate (dish method) |
| BS 2782:Part 8:Method 824A:1984 | Methods of testing plastics. Other properties. Determination of coefficients of friction of plastics film |
| BS 2782:Part 8:Method 830A:1986* ISO 175-1981 | Methods of testing plastics. Other properties. Determination of the effects of liquid chemicals, including water |
| BS 2782:Part 8:Method 835E:1980 | Methods of testing plastics. Other properties. Determination of gelation time of resin in impregnated materials used for laminates |
| BS 2782:Part 9:Method 930A:1977* ISO 2818-1974 | Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens by machining |
| BS 3502-1:1991* ISO 1043-1:1987 | Symbols for plastics and rubber materials. Schedule for symbols for plastics |
| BS 4618-1.1.1:1970 | Recommendations for the presentation of plastics design data. Mechanical properties. Creep in uniaxial tension or compression (with particular reference to solid plastics) |
| BS 4618-1.1.2:1976 | Recommendations for the presentation of plastics design data. Mechanical properties. Creep in flexure at low strains |
| BS 4618-1.1.3:1974 | Recommendations for the presentation of plastics design data. Mechanical properties. Creep lateral contraction ratio (Poisson's ratio) |
| BS 4618-1.1:1970 | Recommendations for the presentation of plastics design data. Mechanical properties. Creep |
| BS 4618-1.2:1972 | Recommendations for the presentation of plastics design data. Mechanical properties. Impact behaviour |
| BS 4618-1.3.1:1975 | Recommendations for the presentation of plastics design data. Mechanical properties. Static fatigue failure |
| BS 4618-1.3.3:1976 | Recommendations for the presentation of plastics design data. Mechanical properties. Environmental stress cracking |
| BS 4618-1.3:1975 | Recommendations for the presentation of plastics design data. Mechanical properties. Strength |
| BS 4618-2.1:1970 | Recommendations for the presentation of plastics design data. Electrical properties. Permittivity |
| BS 4618-2.2:1970 | Recommendations for the presentation of plastics design data. Electrical properties. Loss tangent |
| BS 4618-2.3:1975 | Recommendations for the presentation of plastics design data. Electrical properties. Volume resistivity |
| BS 4618-2.4:1975 | Recommendations for the presentation of plastics design data. Electrical properties. Surface resistivity |
| BS 4618-3.1:1970 | Recommendations for the presentation of plastics design data. Thermal properties. Linear thermal expansion |
| BS 4618-3.2:1973 | Recommendations for the presentation of plastics design data. Thermal properties. Heat content |
| BS 4618-3.3:1973 | Recommendations for the presentation of plastics design data. Thermal properties. Thermal conductivity |
| BS 4618-4.1:1972 | Recommendations for the presentation of plastics design data. Environmental and chemical effects. Chemical resistance to liquids |
| BS 4618-4.2:1972 | Recommendations for the presentation of plastics design data. Environmental and chemical effects. Resistance to natural weathering |
| BS 4618-4.3:1974 | Recommendations for the presentation of plastics design data. Environmental and chemical effects. Resistance to colour change produced by exposure to light |
| BS 4618-4.4:1973 | Recommendations for the presentation of plastics design data. Environmental and chemical effects. The effect of marine exposure |
| BS 4618-4.5:1974 | Recommendations for the presentation of plastics design data. Environmental and chemical effects. The effect on plastics of soil burial and biological attack |
| BS 4618-4.6:1974 | Recommendations for the presentation of plastics design data. Environmental and chemical effects. The thermal endurance of plastics |
| BS 4618-5.1:1970 | Recommendations for the presentation of plastics design data. Other properties. Density |
| BS 4618-5.2:1970 | Recommendations for the presentation of plastics design data. Other properties. Change in linear dimensions with moisture absorption |
| BS 4618-5.3:1972 | Recommendations for the presentation of plastics design data. Other properties. Optical properties |
| BS 4618-5.4:1972 | Recommendations for the presentation of plastics design data. Other properties. Acoustical properties (mechanical damping capacity) |
| BS 4618-5.5:1974 | Recommendations for the presentation of plastics design data. Other properties. Data on diffusion |
| BS 4618-5.6:1975 | Recommendations for the presentation of plastics design data. Other properties. Guide to sliding friction |
| BS 4618:Introduction:1970 | Recommendations for the presentation of plastics design data. General introduction |
| BS 4901:1976 | Specification for plastics colours for building purposes |
| BS 5214:Part 1:1975 | Specification for testing machines for rubbers and plastics. Constant rate of traverse machines |
| BS 7008-2:1988 | Acquisition and presentation of comparable data for basic properties of plastics. Method for multipoint data |
| BS 7746:1994* ISO 11469:1993 | Generic identification and marking of plastics products |
| BS EN 1122:2001 | Plastics. Determination of cadmium. Wet decomposition method |
| BS EN 14233:2002 | Materials and articles in contact with foodstuffs. Plastics. Determination of temperature of plastics materials and articles at the plastics/food interface during microwave and conventional oven heating in order to select the appropriate temperature for migration testing |
| BS EN 14481:2003 | Materials and articles in contact with foodstuffs. Plastics. Test methods for the determination of fatty contact |
| BS EN 14987:2006 | Plastics. Evaluation of disposability in waste water treatment plants. Test scheme for final acceptance and specifications |
| BS EN 14995:2006 | Plastics. Evaluation of compostability. Test scheme and specifications |
| BS EN 15347:2007 | Plastics. Recycled Plastics. Characterization of plastics waste |
| BS EN ISO 10093:1999 | Plastics. Fire tests. Standard ignition sources |
| BS EN ISO 10350-1:2001 | Plastics. Acquisition and presentation of comparable single-point data. Moulding materials |
| BS EN ISO 10350:1995 | Plastics. Acquisition and presentation of comparable single-point data |
| BS EN ISO 1043-1:1999 | Plastics. Symbols and abbreviated terms. Basic polymers and their special characteristics |
| BS EN ISO 1043-1:2002 | Plastics. Symbols and abbreviated terms. Basic polymers and their special characteristics |
| BS EN ISO 11357-1:1997 | Plastics. Differential scanning calorimetry (DSC). General principles |
| BS EN ISO 11358:1997* BS 2782-1:Method 127A:1997 | Plastics. Thermogravimetry (TG) of polymers. General principles |
| BS EN ISO 11403-1:2000 | Plastics. Acquisition and presentation of comparable multipoint data. Mechanical properties |
| BS EN ISO 11403-1:2003 | Plastics. Acquisition and presentation of comparable multipoint data. Mechanical properties |
| BS EN ISO 11403-2:2000 | Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties |
| BS EN ISO 11403-2:2004 | Plastics. Acquisition and presentation of comparable multipoint data. Thermal and processing properties |
| BS EN ISO 11403-3:2001 | Plastics. Acquisition and presentation of comparable multipoint data. Environmental influences on properties |
| BS EN ISO 11469:2000 | Plastics. Generic identification and marking of plastics products |
| BS EN ISO 1183-1:2004 | Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pyknometer method and titration method |
| BS EN ISO 1183-2:2004 | Plastics. Methods for determining the density of non-cellular plastics. Density gradient column method |
| BS EN ISO 1183-3:1999 | Plastics. Methods for determining the density of non-cellular plastics. Gas pyknometer method |
| BS EN ISO 12058-1:2002 | Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method |
| BS EN ISO 13468-1:1997* BS 2782-5:Method 532A:1997 | Plastics. Determination of the total luminous transmittance of transparent materials. Single-beam instrument |
| BS EN ISO 13468-2:2006 | Plastics. Determination of the total luminous transmittance of transparent materials. Double-beam instrument |
| BS EN ISO 13927:2003 | Plastics. Simple heat release test using a conical radiant heater and a thermopile detector |
| BS EN ISO 14851:2004 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer |
| BS EN ISO 14852:2004 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium. Method by analysis of evolved carbon dioxide |
| BS EN ISO 14855-1:2007 | Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide. General method |
| BS EN ISO 14855-2:2009 | Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide. Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test |
| BS EN ISO 14855:2004 | Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide |
| BS EN ISO 15512:2003 | Plastics. Determination of water content |
| BS EN ISO 15512:2009 | Plastics. Determination of water content |
| BS EN ISO 15791-1:2004 | Plastics. Development and use of intermediate-scale fire tests for plastics products. General guidance |
| BS EN ISO 1628-1:1998* BS 2782-7:Method 732A:1998 | Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles |
| BS EN ISO 1628-1:2009 | Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles |
| BS EN ISO 17556:2004 | Plastics. Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved |
| BS EN ISO 175:2001* BS 2782-8:Method 830A:1999 | Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals |
| BS EN ISO 176:2000 | Plastics. Determination of loss of plasticizers. Activated carbon method |
| BS EN ISO 176:2005 | Plastics. Determination of loss of plasticizers. Activated carbon method |
| BS EN ISO 177:2000 | Plastics. Determination of migration of plasticizers |
| BS EN ISO 178:1997* BS 2782-3:Method 335A:1993 * ISO 178:1993 | Plastics. Determination of flexural properties |
| BS EN ISO 178:2003 | Plastics. Determination of flexural properties |
| BS EN ISO 179-1:1999 | Plastics. Determination of Charpy impact properties. Non-instrumented impact test |
| BS EN ISO 179-1:2001 | Plastics. Determination of Charpy impact properties. Non-instrumented impact test |
| BS EN ISO 179-2:1999* BS 2782-3:Method 359B:1999 | Plastics. Determination of Charpy impact properties. Instrumented impact test |
| BS EN ISO 179:1997 | Plastics. Determination of Charpy impact strength |
| BS EN ISO 180:1997* BS 2782-3:Method 350:1993 | Plastics. Determination of Izod impact strength |
| BS EN ISO 180:2001 | Plastics. Determination of Izod impact strength |
| BS EN ISO 183:2000 | Plastics. Qualitative evaluation of the bleeding of colorants |
| BS EN ISO 20200:2005 | Plastics. Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test |
| BS EN ISO 2039-1:1997* BS 2782-3:Method 365D:1997 | Plastics. Determination of hardness. Ball indentation method |
| BS EN ISO 2039-1:2003 | Plastics. Determination of hardness. Ball indentation method |
| BS EN ISO 2039-2:2000 | Determination of Rockwell hardness. Rockwell hardness. Rockwell hardness |
| BS EN ISO 2114:2000* BS 2782-4:Method 432B:2000 | Plastics (polyester resins) and paints and varnishes (binders). Determination of partial acid value and total acid value |
| BS EN ISO 22088-1:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC). General guidance |
| BS EN ISO 22088-2:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC). Constant tensile load method |
| BS EN ISO 22088-3:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method |
| BS EN ISO 22088-4:2006 | Plastics. Determination of resistance to environmental stress cracking (ESC). Ball or pin impression method |
| BS EN ISO 22088-5:2009 | Plastics. Determination of resistance to environmental stress cracking (ESC). Constant tensile deformation method |
| BS EN ISO 22088-6:2009 | Plastics. Determination of resistance to environmental stress cracking (ESC). Slow strain rate method |
| BS EN ISO 2578:1999* BS 2782-1:Method 135:1993 | Plastics. Determination of the time-temperature limits after prolonged exposure to heat |
| BS EN ISO 2818:1996 | Plastics. Preparation of test specimens by machining |
| BS EN ISO 291:1997 | Plastics. Standard atmospheres for conditioning and testing |
| BS EN ISO 291:2005 | Plastics. Standard atmospheres for conditioning and testing |
| BS EN ISO 291:2008 | Plastics. Standard atmospheres for conditioning and testing |
| BS EN ISO 3001:1999 | Plastics. Epoxy compounds. Determination of epoxy equivalent |
| BS EN ISO 3146:1997* BS 2782-1:Methods 125A to C2 | Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers |
| BS EN ISO 3146:2000 | Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| BS EN ISO 3167:1997* BS 2782-9:Method 931A:1993 * ISO 3167:1993 | Plastics. Multipurpose-test specimens |
| BS EN ISO 3167:2003 | Plastics. Multipurpose test specimens |
| BS EN ISO 3219:1995* BS 2782-7:Method 730B:1994 | Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using a rotational viscometer with defined shear rate |
| BS EN ISO 3251:2008 | Paints, varnishes and plastics. Determination of non- volatile-matter content |
| BS EN ISO 3451-1:1997* BS 2782-4:Method 470A:1997 | Plastics. Determination of ash. General methods |
| BS EN ISO 3451-1:2008 | Plastics. Determination of ash. General methods |
| BS EN ISO 3672-2:2001 | Plastics. Unsaturated-polyester resins (UP-R). Preparation of test specimens and determination of properties |
| BS EN ISO 3915:1999 | Plastics. Measurement of resistivity of conductive plastics |
| BS EN ISO 4589-1:2000 | Plastics. Determination of burning behaviour by oxygen index. Guidance |
| BS EN ISO 4589-2:1999 | Plastics. Determination of burning behaviour by oxygen index. Ambient-temperature test |
| BS EN ISO 4589-3:1996 | Plastics. Determination of burning behaviour by oxygen index. Elevated temperature test |
| BS EN ISO 4599:1997* BS 2782-8:Method 832A:1991 | Plastics. Determination of resistance to environmental stress cracking (ESC). Bent strip method |
| BS EN ISO 4600:1998 | Plastics. Determination of environmental stress cracking (ESC). Ball or pin impression method |
| BS EN ISO 4611:2001 | Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist |
| BS EN ISO 4611:2008 | Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist |
| BS EN ISO 472:2001 | Plastics. Vocabulary |
| BS EN ISO 4892-1:2001 | Plastics. Methods of exposure to laboratory light sources. General guidance |
| BS EN ISO 4892-2:2000 | Plastics. Methods of exposure to laboratory light sources. Xenon-arc sources |
| BS EN ISO 4892-2:2006 | Plastics. Methods of exposure to laboratory light sources. Xenon-arc lamps |
| BS EN ISO 4892-3:2000 | Plastics. Methods of exposure to laboratory light sources. Fluorescent UV lamps |
| BS EN ISO 4892-3:2006 | Plastics. Methods of exposure to laboratory light sources. Fluorescent UV lamps |
| BS EN ISO 489:1999* BS 2782-5:Method 531A:1999 | Plastics. Determination of refractive index |
| BS EN ISO 527-1:1996* BS 2782-3:Method 321:1994 * ISO 527-1:1993 | Plastics. Determination of tensile properties. General principles |
| BS EN ISO 527-2:1996* BS 2782-3:Method 322:1994 | Plastics. Determination of tensile properties. Test conditions for moulding and extrusion plastics |
| BS EN ISO 5659-1:1999 | Plastics. Smoke generation. Guidance on optical-density testing |
| BS EN ISO 5659-2:1999 | Plastics. Smoke generation. Determination of optical density by a single chamber test |
| BS EN ISO 5659-2:2006 | Plastics. Smoke generation. Determination of optical density by a single-chamber test |
| BS EN ISO 604:1997* BS 2782-3:Method 345A:1993 | Plastics. Determination of compressive properties |
| BS EN ISO 604:2003 | Plastics. Determination of compressive properties |
| BS EN ISO 60:2000 | Plastics. Determination of apparent density of material that can be poured from a specified funnel |
| BS EN ISO 6186:1999 | Plastics. Determination of pourability |
| BS EN ISO 61:2000 | Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel |
| BS EN ISO 6252:1998 | Plastics. Determination of environmental stress cracking (ESC). Constant-tensile-stress method |
| BS EN ISO 62:1999 | Plastics. Determination of water absorption |
| BS EN ISO 62:2008 | Plastics. Determination of water absorption |
| BS EN ISO 6427:1999* BS 2782-4:Method 455A:1993 | Plastics. Determination of matter extractable by organic solvents (conventional methods) |
| BS EN ISO 6603-1:1997 | Plastics. Determination of multi-axial impact behaviour of rigid plastics. Falling dart method |
| BS EN ISO 6603-1:2000 | Plastics. Determination of multi-axial impact behaviour of rigid plastics. Non-instrumented impact testing |
| BS EN ISO 6603-2:1997* BS 2782-3:Method 353B:1991 | Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture test |
| BS EN ISO 6603-2:2000 | Plastics. Determination of multi-axial impact behaviour of rigid plastics. Instrumented puncture testing |
| BS EN ISO 6721-1:1996* BS 2782-3:Method 342A:1996 | Plastics. Determination of dynamic mechanical properties. General principles |
| BS EN ISO 6721-1:2002 | Plastics. Determination of dynamic mechanical properties. General principles |
| BS EN ISO 6721-2:1996* BS 2782-3:Method 342B:1996 | Plastics. Determination of dynamic mechanical properties. Torsion-pendulum method |
| BS EN ISO 6721-2:2008 | Plastics. Determination of dynamic mechanical properties. Torsion-pendulum method |
| BS EN ISO 6721-3:1996* BS 2782-3:Method 338A:1996 | Plastics. Determination of dynamic mechanical properties. Flexural vibration. Resonance-curve method |
| BS EN ISO 75-1:1996* BS 2782-1:Method 121:1994 * ISO 75-1:1993 | Plastics. Determination of temperature of deflection under load. General test method |
| BS EN ISO 75-1:2004 | Plastics. Determination of temperature of deflection under load. General test method |
| BS EN ISO 75-2:1996* BS 2782-1:Methods 121A to 121C * ISO 75-2:1993 | Plastics. Determination of temperature of deflection under load. Plastics and ebonite |
| BS EN ISO 75-2:2004 | Plastics. Determination of temperature of deflection under load. Plastics and ebonite |
| BS EN ISO 8256:1997 | Plastics. Determination of tensile-impact strength |
| BS EN ISO 8256:2004 | Plastics. Determination of tensile-impact strength |
| BS EN ISO 846:1997 | Plastics. Evaluation of the action of microorganisms |
| BS EN ISO 868:1998 | Plastics and ebonite. Determination of indentation hardness by means of a a durometer (Shore hardness) |
| BS EN ISO 868:2003 | Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness) |
| BS EN ISO 877:1997* BS 2782-5:Method 550B:1996 | Plastics. Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
| BS EN ISO 899-1:1997* BS 2782-3:Method 324A:1997 | Plastics. Determination of creep behaviour. Tensile creep |
| BS EN ISO 899-1:2003 | Plastics. Determination of creep behaviour. Tensile creep |
| BS EN ISO 899-2:1997* BS 2782-3:Method 324B:1997 | Plastics. Determination of creep behaviour. Flexural creep by three-point loading |
| BS EN ISO 899-2:2003 | Plastics. Determination of creep behaviour. Flexural creep by three-point loading |
| BS EN ISO 9369:1997 | Plastics. Basic materials for polyurethanes. Pure isocyanates. Analysis of isocyanate groups |
| BS EN ISO 9773:1999 | Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
| BS ISO 10093:1994 | Plastics. Fire tests. Standard ignition sources |
| BS ISO 10840:2003 | Plastics. Guidance for the use of standard fire tests |
| BS ISO 10840:2008 | Plastics. Guidance for the use of standard fire tests |
| BS ISO 11357-2:1999 | Plastics. Differential scanning calorimetry (DSC). Determination of glass transition temperature |
| BS ISO 11357-3:1999 | Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization |
| BS ISO 11357-4:2005 | Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity |
| BS ISO 11357-5:1999 | Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion |
| BS ISO 11357-6:2002 | Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time |
| BS ISO 11357-6:2008 | Plastics. Differential scanning calorimetry (DSC). Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
| BS ISO 11357-7:2002 | Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics |
| BS ISO 11358-2:2005 | Plastics. Thermographimetry (TG) of polymers. Determination of activation energy |
| BS ISO 11359-1:1999 | Plastics. Thermomechanical analysis (TMA). General principles |
| BS ISO 11359-2:1999 | Plastics. Thermomechanical analysis (TMA). Determination of coefficient of linear thermal expansion and glass transition temperature |
| BS ISO 11359-3:2002 | Plastics. Thermomechanical analysis (TMA). Determination of penetration temperature |
| BS ISO 11443:2005 | Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers |
| BS ISO 11907-1:1998 | Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Guidance |
| BS ISO 11907-2:1995 | Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Static method |
| BS ISO 11907-3:1998 | Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a travelling furnace |
| BS ISO 11907-4:1998 | Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic decomposition method using a conical radiant heater |
| BS ISO 12992:1995 | Plastics. Vertical flame spread determination for film and sheet |
| BS ISO 13586:2000 | Plastics. Determination of fracture toughness (Gic and Kic). Linear elastic fracture mechanics (LEFM) approach |
| BS ISO 13741-1:1998 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography. Direct liquid injection method |
| BS ISO 13741-2:1998 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of residual monomers and other organic components by capillary-column gas chromatography. Headspace method |
| BS ISO 1409:2006 | Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method |
| BS ISO 14853:2005 | Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production |
| BS ISO 14897:2000 | Plastics. Polyols for use in the production of polyurethane. Determination of water content |
| BS ISO 15033:2000 | Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC |
| BS ISO 15033:2007 | Plastics. Determination of caprolactam and its cyclic and linear oligomers by HPLC |
| BS ISO 15314:2004 | Plastics. Methods for marine exposure |
| BS ISO 15850:2002 | Plastics. Determination of tension-tension fatigue crack propagation. Linear elastic fracture mechanics (LEFM) approach |
| BS ISO 15985:2004 | Plastics. Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions. Method by analysis of released biogas |
| BS ISO 16014-1:2003 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles |
| BS ISO 16014-2:2003 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Universal calibration method |
| BS ISO 16014-3:2003 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method |
| BS ISO 16014-4:2003 | Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method |
| BS ISO 16152:2005 | Plastics. Determination of xylene-soluble matter in polypropylene |
| BS ISO 1625:1998 | Plastics. Polymer dispersions. Determination of non-volatile matter (residue) at specified temperatures |
| BS ISO 16869:2001 | Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations |
| BS ISO 16869:2008 | Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations |
| BS ISO 16929:2002 | Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
| BS ISO 17281:2002 | Plastics. Determination of fracture toughness (Gic and Kic) at moderately high loading rates (1 m/s) |
| BS ISO 17282:2004 | Plastics. Guide to the acquisition and presentation of design data |
| BS ISO 17422:2002 | Plastics. Environmental aspects. General guidelines for their inclusion in standards |
| BS ISO 17744:2004 | Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method |
| BS ISO 1922:2001 | Rigid cellular plastics. Determination of shear strength |
| BS ISO 20753:2008 | Plastics. Test specimens |
| BS ISO 20965:2005 | Plastics. Determination of the transient extensional viscosity of polymer melts |
| BS ISO 21509:2006 | Plastics and ebonite. Verification of Shore durometers |
| BS ISO 22196:2007 | Plastics. Measurement of antibacterial activity on plastics surfaces |
| BS ISO 25762:2009 | Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| BS ISO 472:1988 | Plastics. Vocabulary |
| BS ISO 5659-2:1994 | Plastics. Smoke generation. Determination of specific optical density |
| BS ISO 6133:1998 | Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
| BS ISO 6721-10:1999 | Plastics. Determination of dynamic mechanical properties. Complex shear viscosity using a parallel-plate oscillatory rheometer |
| BS ISO 6721-9:1997+A1:2007* ISO 6721-9:1997 | Plastics. Determination of dynamic mechanical properties. Tensile vibration. Sonic-pulse propagation method |
| BS ISO 8660:2002 | Plastics. Determination of permanganate absorption number of caprolactam. Spectrometric method |
| BS ISO 871:1996 | Plastics. Determination of ignition temperature using a hot-air furnace |
| BS ISO 871:2006 | Plastics. Determination of ignition temperature using a hot-air furnace |
| BS ISO 9370:1997 | Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method |
| BS ISO 974:2000 | Plastics. Determination of the brittleness temperature by impact |
| BS ISO TR 10840:1993 | Plastics. Burning behaviour. Guidance for development and use of fire tests |
| BS ISO/TR 5659-3:1999 | Plastics. Smoke generation. Determination of optical density by a dynamic flow method |
| DD ENV 1122:1995 | Determination of cadmium in plastics with the method of the wet decomposition |
| PAS 103:2004 | Collected waste plastics packaging. Specification for quality and guidance for good practice in collection and preparation for recycling |
| PD CEN/TR 15351:2006 | Plastics. Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items |
