| BS 2782:Part 11:Method 1102A:1981 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Longitudinal reversion of pipes: immersion bath method |
| BS 2782:Part 11:Method 1102B:1981 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Longitudinal reversion of pipes: oven method |
| BS 2782:Part 11:Method 1103A:1982 | Methods of testing plastics. Thermoplastics pipes, fittings and valves. Stress relief test for injection moulded fittings: oven method |
| BS 4514:1983 | Specification for unplasticized PVC soil and ventilating pipes, fittings and accessories |
| BS 4514:2001 | Unplasticized PVC soil and ventilating pipes of 82.4 mm minimum mean outside diameter, and fittings and accessories of 82.4 mm and of other sizes. Specification |
| BS 4660:1989 | Specification for unplasticized polyvinyl chloride (PVC-U) pipes and plastics fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage |
| BS 4660:2000 | Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage |
| BS 4962:1989 | Specification for plastics pipes and fittings for use as subsoil field drains |
| BS 5255:1989 | Specification for thermoplastics waste pipe and fittings |
| BS 5409-1:1976 | Specification for nylon tubing. Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations |
| BS 5409-2:1978 | Specification for nylon tubing. Plasticized and unplasticized nylon tubing types 11 and 12 for use primarily in the automobile industry |
| BS 5480:1990 | Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
| BS 5481:1977 | Specification for unplasticized PVC pipe and fittings for gravity sewers |
| BS 5955-6:1980 | Plastics pipework (thermoplastics materials). Code of practice for the installation of unplasticized PVC pipework for gravity drains and sewers |
| BS 5955-8:1990 | Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastics pipes and associated fittings for use in domestic hot and cold water services and heating systems |
| BS 5955-8:2001 | Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings |
| BS 7291-1:1990 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. General requirements |
| BS 7291-1:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. General requirements |
| BS 7291-1:2006 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. General requirements |
| BS 7291-2:1990 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pipes and associated fittings |
| BS 7291-2:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pipes and associated fittings |
| BS 7291-2:2006 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pipes and associated fittings |
| BS 7291-3:1990 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for crosslinked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-3:2001 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for cross-linked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-3:2006 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for cross-linked polyethylene (PE-X) pipes and associated fittings |
| BS 7291-4:1990 | Thermoplastics pipes and associated fittings for hot and cold water for domestic purposes and heating installations in buildings. Specification for chlorinated polyvinyl chloride (PVC-C) pipes and associated fittings and solvent cement |
| BS 7336:1990 | Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the conveyance of gaseous fuels |
| BS 7431:1991* ISO 9808:1990 | Method for assessing solar water heaters. Elastomeric materials for absorbers, connecting pipes and fittings |
| BS 879-2:1988 | Water well casing. Specification for thermoplastics tubes for casing and slotted casing |
| BS EN 1054:1996* BS 2782-11:Method 1112C:1996 | Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints |
| BS EN 1055:1996* BS 2782-11:Method 1111A:1996 | Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling |
| BS EN 1115-1:2001 | Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). General |
| BS EN 12007-2:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar. Specific functional recommendations for polyethylene (MOP up to and including 10 bar) |
| BS EN 1329-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system |
| BS EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. General |
| BS EN 13566-2:2005 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with continuous pipes |
| BS EN 13566-3:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with close fit pipes |
| BS EN 13566-4:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks. Lining with cured-in-place pipes |
| BS EN 1437:2002 | Plastics piping systems. Piping systems for underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading |
| BS EN 1451-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Specifications for pipes, fittings and the system |
| BS EN 1455-1:2000 | Plastics piping systems for soil and waste (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS). Specifications for pipes, fittings and the system |
| BS EN 1456-1:2001 | Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for piping components and the system |
| BS EN 1519-1:2000 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Specifications for pipes, fittings and the system |
| BS EN 1636-3:2001 | Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fittings |
| BS EN 1636-5:2001 | Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Fitness for purpose of the joints |
| BS EN 1636-6:2001 | Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Practices for installation |
| BS EN 1905:1999* BS 2782-11:Method 1105C:1999 | Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content |
| BS EN 28233:1992* BS 2782-11:Method 1131:1992* ISO 8233:1988 | Thermoplastics valves. Torque. Test method |
| BS EN 28659:1992* BS 2782-11:Method 1132:1992* ISO 8659:1989 | Thermoplastics valves. Fatigue strength. Test method |
| BS EN 852-1:1996* BS 2782-11:Method 1122A:1996 | Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination of migration values of plastics pipes |
| BS EN ISO 14692-1:2002 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Vocabulary, symbols, applications and materials |
| BS EN ISO 14692-2:2002 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Qualification and manufacture |
| BS EN ISO 14692-3:2002 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. System design |
| BS EN ISO 14692-4:2002 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Fabrication, installation and operation |
| BS EN ISO 9311-2:2002 | Adhesives for thermoplastic piping systems. Determination of shear strength |
| BS ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 10838-2:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Metal fittings for pipes of nominal outside diameter greater than 63mm |
| BS ISO 10838-3:2001 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels. Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63mm |
| BS ISO 14531-1:2002 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Pipes |
| BS ISO 14531-2:2004 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for heat-fusion jointing |
| BS ISO 14531-3:2006 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. Fittings for mechanical jointing (including PE-X/metal transitions) |
| BS ISO 14531-4:2006 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications. System design and installation guidelines |
| BS ISO 15840:2004 | Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| BS ISO 4437:2007 | Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications |
| BS ISO 9393-1:2004 | Thermoplastics valves for industrial applications. Pressure test methods and requirements. General |
| DD CEN/TS 1456-2:2003 | Plastic piping systems for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 1329-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity |
| DD ENV 13801:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics Recommended practice for installation |
| DD ENV 1401-3:2001 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for installation |
| DD ENV 1451-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity |
| DD ENV 1519-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity |
| DD ENV 1565-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC). Guidance for the assessment of conformity |
| DD ENV 1566-2:2001 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C). Guidance for the assessment of conformity |
