IHS Logo IHS - The Source for Critical Information and Insight BSi Logo
British Standards Online Heading
How to subscribe to British Standards Online
  Need a quote from IHS?
  The British Standards Online service is available via subscription from IHS. To speak to an expert about this service, please call:
+44 (0)1344 328300 or complete the
form below

Request an IHS quote for
British Standards Online
 
IHS Logo

BSi Logo
The following lists the key subject areas for this British Standards module.
Click the links to view the associated British Standards for each area.

Home >
Plastics industry ( Module 45 ) >

Thermoplastic materials, Plastics industry ( Module 45 )
BS 1493:1987Method of specifying general purpose polystyrene (PS) moulding and extrusion materials
BS 1524:1993Specification for cellulose acetate moulding materials
BS 2571:1990Specification for general-purpose flexible PVC compounds for moulding and extrusion
BS 2782-1:Method 120C:1990Methods of testing plastics. Thermal properties. Determination of the 1/10 Vicat softening temperature of thermoplastics
BS 2782-1:Method 130A:1991* ISO 182-1:1990Methods of testing plastics. Thermal properties. Determination of the thermal stability of polyvinyl chloride by the Congo red method
BS 2782-1:Method 131B:1983Methods of testing plastics. Thermal properties. Determination of extensibility after heat ageing of flexible polyvinyl chloride sheet
BS 2782-1:Method 140D:1997Methods of testing plastics. Thermal properties. Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)
BS 2782-1:Method 150B:1976Methods of testing plastics. Thermal properties. Determination of cold flex temperature of flexible polyvinyl compound
BS 2782-1:Method 150C:1983Methods of testing plastics. Thermal properties. Determination of low temperature extensibility of flexible polyvinyl chloride sheet
BS 2782-1:Method 151A:1984Methods of testing plastics. Thermal properties. Determination of cold bend temperature of flexible polyvinyl chloride extrusion compound
BS 2782-1:Methods 120A; 120B [...]:1990* ISO 306:1987Methods of testing plastics. Thermal properties. Determination of Vicat softening temperature of thermoplastics
BS 2782-1:Methods 134A and 134B:1992Methods of testing plastics. Thermal properties. Determination of the oxidation induction time of thermoplastics
BS 2782-2:Method 241A:1984Methods of testing plastics. Electrical properties. Determination of effect of polyvinyl chloride compound on the loss tangent of polyethylene
BS 2782-3:Method 327A:1993Methods of testing plastics. Mechanical properties. Determination of tensile strength and elongation at break of polytetrafluoroethylene (PTFE) products
BS 2782-4:Method 434B:1977Methods of testing plastics. Chemical properties. Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the chloroform extract
BS 2782-4:Method 434D:1975Methods of testing plastics. Chemical properties. Determination of antioxidants in polyolefin compounds by a spectrophotometric method
BS 2782-4:Method 452B:1993Methods of testing plastics. Chemical properties. Determination of carbon black content of polyolefin compound
BS 2782-4:Method 452C:1979Methods of testing plastics. Chemical properties. Determination of butyl rubber content of low density polyethylene compounds
BS 2782-4:Method 453A:1978* ISO 2561:1974Methods of testing plastics. Chemical properties. Determination of residual styrene monomer in polystyrene by gas chromatography
BS 2782-4:Method 453C:1996* ISO 4581:1994Methods of testing plastics. Chemical properties. Determination of residual acrylonitrile monomer content in styrene/acrylonitrile copolymers using gas chromatography
BS 2782-4:Method 454D:1978* ISO 1269:1975Methods of testing plastics. Chemical properties. Determination of volatile matter (including water) of PVC resins
BS 2782-4:Method 470B:1999* ISO 3451-2:1998Methods of testing plastics. Chemical properties. Determination of ash of polyalkylene terephthalates
BS 2782-4:Methods 452D to 452F:1978Methods of testing plastics. Chemical properties. Determination of pH of water extract of polyolefin compound. Determination of water-soluble sulphates in polyolefin compound. Determination of water-soluble chlorides in polyolefin compound
BS 2782-6:Method 621D:1978* ISO 1068:1975Methods of testing plastics. Dimensional properties. Determination of compacted apparent bulk density of PVC resins
BS 2782-7:Method 732B:1991* ISO 1628-2:1988Methods of testing plastics. Rheological properties. Determination of viscosity number of poly(vinyl chloride) resins
BS 2782-7:Method 732D:1999* ISO 1628-4:1999Methods of testing plastics. Rheological properties. Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers. Method 732D: Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers
BS 2782-8:Methods 823A and 823B:1978Methods of testing plastics. Other properties. Methods for the assessment of carbon black dispersion in polyethylene using a microscope
BS 2782-9:Method 940A:1990* ISO 2557-1:1989Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics in the form of bars with a specified reversion
BS 2782-9:Method 940B:1989* ISO 2557-2:1986Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
BS 2782:Part 1:Method 122A:1976Methods of testing plastics. Thermal properties. Determination of deformation under heat of flexible polyvinyl chloride compound
BS 2782:Part 1:Method 124A:1992Methods of testing plastics. Thermal properties. Determination of the softening point of synthetic resin (ring and ball method)
BS 2782:Part 1:Method 140D:1980Methods of testing plastics. Thermal properties. Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)
BS 2782:Part 4:Method 434A:1975Methods of testing plastics. Chemical properties. The identification of antioxidants and ultra-violet absorbers in polyolefin compounds by thin layer chromatography
BS 2782:Part 4:Method 434C:1977Methods of testing plastics. Chemical properties. Determination of antioxidants in polyolefin compounds by ultra-violet absorption of the toluene/ethanol extract in ethanol solution
BS 2782:Part 4:Method 454C:1978* ISO 1264-1975 Methods of testing plastics. Chemical properties. Determination of pH of aqueous extract of PVC resins
BS 2782:Part 4:Method 454E:1992* ISO 4608:1984 Methods of testing plastics. Chemical properties. Determination of plasticizer absorption at room temperature of PVC resins for general use
BS 2782:Part 4:Method 454F:1978* ISO 4610-1977 Methods of testing plastics. Chemical properties. Sieve analysis of vinyl chloride homopolymer and copolymer resins using air-jet sieve apparatus
BS 2782:Part 7:Method 720A:1979Methods of testing plastics. Rheological properties. Determination of melt flow rate of thermoplastics
BS 2782:Part 9:Method 910A:1977* ISO 294-1975Methods of testing plastics. Sampling and test specimen preparation. Injection moulding test specimens of thermoplastic materials
BS 2782:Part 9:Method 910A:1996* ISO 294:1995Methods of testing plastics. Sampling and test specimen preparation. Injection moulding test specimens of thermoplastic materials
BS 2782:Part 9:Method 941:1990* ISO 8328:1989Methods of testing plastics. Sampling and test specimen preparation. Determination of maximum reversion of amorphous thermoplastics moulding materials
BS 3126:1987Method of specifying toughened polystyrene (SB) moulding and extrusion materials
BS 3241:1960Specification for toughened polystyrene for sheet extrusion
BS 3412:1992Methods of specifying general purpose polyethylene materials for moulding and extrusion
BS 4840-2:1994Rigid polyurethane (PUR) foam in slab form. Specification for PUR foam for use in refrigerator cabinets, cold rooms and stores
BS 4935:1989Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
BS 4936:1987Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials
BS 5139:1991Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion
BS 5734-1:1990Polyester moulding compounds for electrical and other purposes. Methods of test
BS 5734-3:1990Polyester moulding compounds for electrical and other purposes. Specification for dough moulding compounds for mechanical purposes
BS 5734-5:1990Polyester moulding compounds for electrical and other purposes. Specification for sheet moulding compounds for mechanical purposes
BS 6564-3:1990Polytetrafluoroethylene (PTFE) materials and products. Specification for E glass fibre filled polytetrafluoroethylene
BS 6564:Part 1:Section 1.1:1989Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusion. Specification
BS 6564:Part 1:Section 1.2:1989Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusion. Method of specifying
BS 6564:Part 2:1991Polytetrafluoroethylene (PTFE) materials and products. Specification for fabricated unfilled polytetrafluoroethylene products
BS 7029-1:1993Method of specifying thermoplastics injection mouldings. General requirements
BS 7029-2:1993Method of specifying thermoplastics injection mouldings. Additional requirements for polycarbonate, polyamide and polyethylene mouldings
BS 7485:1991Method of specifying aqueous dispersions of polytetrafluoroethylene (PTFE) materials
BS EN 12099:1997* BS 2782-11:Method 1103E:1997 Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content
BS EN 12814-4:2001Testing of welded joints of thermoplastics semi-finished products. Peel test
BS EN 13677-1:2003Reinforced thermoplastic moulding compounds. Specification for GMT. Designation
BS EN 13677-2:2003Reinforced thermoplastic moulding compounds. Specification for GMT. Methods of test and general requirements
BS EN 13677-3:2003Reinforced thermoplastic moulding compounds. Specification for GMT. Specific requirements
BS EN 15342:2007Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
BS EN 15343:2007Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content
BS EN 15344:2007Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates
BS EN 15345:2007Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates
BS EN 15346:2007Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
BS EN 15348:2007Plastics. Recycled plastics. Characterization of poly(ethylene terephthalate) (PET) recyclates
BS EN 1778:2000Characteristic values for welded thermoplastics constructions. Determination of allowable stresses and moduli for design of thermoplastics equipment
BS EN 513:1999Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to artificial weathering
BS EN ISO 10350-1:2008Plastics. Acquisition and presentation of comparable single-point data. Moulding materials
BS EN ISO 10366-1:1999Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 10366-1:2002Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 10366-2:1999Plastics. Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 10366-2:2003Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1060-1:1999Plastics. Homopolymer and copolymer resins of vinyl chloride. Designation system and basis for specifications
BS EN ISO 1060-2:1999Plastics. Homopolymer and copolymer resins of vinyl chloride. Preparation of test samples and determination of properties
BS EN ISO 1061:1999Plastics. Unplasticized cellulose acetate. Determination of free acidity
BS EN ISO 1110:1998Plastics. Polyamides. Accelerated conditioning of test specimens
BS EN ISO 11337:2004Plastics. Polyamides. Determination of e-caprolactam and w-laurolactum by gas chromatography
BS EN ISO 1133:2000* BS 2782-7:Method 720A:1997 Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN ISO 1133:2005Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN ISO 11468:2000Plastics. Preparation of PVC pastes for test purposes. Dissolver method
BS EN ISO 11542-1:2001Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 11542-2:1998Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1157:2000Plastics. Cellulose acetate in dilute solution. Determination of viscosity number and viscosity ratio
BS EN ISO 1158:1998Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine content
BS EN ISO 1163-1:2000Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 1163-2:2000Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 12086-1:2001Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 12086-1:2006Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 12086-2:2001Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 12086-2:2006Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1264:1997* BS 2782-4:Method 454C:1997 Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of pH of aqueous extract
BS EN ISO 1265:1997Plastics. Polyvinyl chloride resins. Determination of number of impurities and foreign particles
BS EN ISO 1265:2007Plastics. Poly(vinyl chloride) resins. Determination of number of impurities and foreign particles
BS EN ISO 1269:2006Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water)
BS EN ISO 14632:1999Extruded sheets of polyethylene (PE-HD). Requirements and test methods
BS EN ISO 14663-1:2006Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 14663-2:2006Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 14896:2001Plastics. Polyurethane raw materials. Determination of isocyanate content
BS EN ISO 14910-1:2006Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specifications
BS EN ISO 14910-2:2006Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
BS EN ISO 15023-1:2006Plastics. Poly(vinyl alcohol) (PVAL) materials. Designation system and basis for specifications
BS EN ISO 15023-2:2006Plastics. Poly(vinyl alcohol) (PVAL) materials. Determination of properties
BS EN ISO 15103-1:2004Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 15103-2:2004Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 15103-2:2007Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 15526-1:2004Plastics. Polyketone (PK) moulding and extrusion materials Designation system and basis for specifications
BS EN ISO 15526-2:2004Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 1597:2000Plastics. Unplasticized cellulose acetate. Determination of acetic acid yield
BS EN ISO 1598:2000Plastics. Cellulose acetate. Determination of insoluble particles
BS EN ISO 1599:1999Plastics. Cellulose acetate. Determination of viscosity loss on moulding
BS EN ISO 1622-1:2000Plastics. Polystrene (PS) moulding and extrusion materials Designation system and basis for specifications
BS EN ISO 1622-2:1999Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 1624:1997Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis in water
BS EN ISO 1624:2002Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis in water
BS EN ISO 1628-2:2000Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Poly(vinyl chloride) resins
BS EN ISO 1628-3:2000Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Polyethylenes and polypropylenes
BS EN ISO 1628-3:2003Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Polyethylenes and polypropylenes
BS EN ISO 18064:2005Thermoplastic elastomers. Nomenclature and abbreviated terms
BS EN ISO 182-2:2000Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. pH method
BS EN ISO 182-3:2000Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Conductometric method
BS EN ISO 182-3:2001Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Conductometric method
BS EN ISO 182-4:2000Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Potentiometric method
BS EN ISO 182-4:2001Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures. Potentiometric method
BS EN ISO 1872-1:1999Polyethylene (PE) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 1872-2:1997Polyethylene (PE) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1872-2:2007Plastics. Polyethylene (PE) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1873-1:1995Plastics. Polypropylene (PP) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 1873-2:1997Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007Plastics. Polypropylene (PP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1874-1:2001Plastics. Polyamide (PA) moulding and extrusion materials. Designation
BS EN ISO 1874-2:1996Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 1874-2:2006Plastics. Polyamide (PA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2580-1:1999Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 2580-1:2001Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 2580-1:2002Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 2580-2:2000Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2580-2:2003Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 28941-1:2008Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 2897-1:1999Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 2897-2:1999Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2897-2:2003Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2898-1:2000Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 2898-2:2000Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 2898-2:2008Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials. Preparation of test specimens and determination of properties (ISO 2898-2:2008)
BS EN ISO 293:2003Plastics. Compression moulding test specimens of thermoplastic materials
BS EN ISO 293:2005Plastics. Compression moulding of test specimens of thermoplastic materials
BS EN ISO 294-1:1998* BS 2782-9:Method 910B:1997 Plastics. Injection moulding of test specimens of thermoplastic materials. General principles, and moulding of multipurpose and bar test specimens
BS EN ISO 294-2:1998* BS 2782-9:Method 910C:1997 Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
BS EN ISO 294-3:1998* BS 2782-9:Method 910D:1997 Plastics. Injection moulding of test specimens of thermoplastic materials. Small plates
BS EN ISO 294-3:2003Plastics. Injection moulding of test specimens of thermoplastic materials. Small plates
BS EN ISO 294-4:1998* BS 2782-9:Method 910E:1997 Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
BS EN ISO 294-4:2003Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
BS EN ISO 305:1999Plastics. Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds. Discoloration method
BS EN ISO 306:1997* BS 2782-1:Meth120A* B * D* E:1990Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 306:2004Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
BS EN ISO 307:1998Plastics. Polyamides. Determination of viscosity number
BS EN ISO 307:2003Plastics. Polyamides. Determination of viscosity number
BS EN ISO 307:2007Plastics. Polyamides. Determination of viscosity number
BS EN ISO 3451-4:2000Plastics. Determination of ash. Polyamides
BS EN ISO 3451-5:1997* BS 2782-4:Method 470E:1991 Plastics. Determination of ash. Poly(vinyl chloride)
BS EN ISO 3451-5:2002Plastics. Determination of ash. Poly(vinyl chloride)
BS EN ISO 4577:1999Plastics. Polypropylene and propylene-copolymers. Determination of thermal oxidative stability in air. Oven method
BS EN ISO 4608:1998* BS 2782-4:Method 454E:1998 Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption at room temperature
BS EN ISO 4610:1997* BS 2782-4:Method 454F:1997 Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis using air-jet sieve apparatus
BS EN ISO 4610:2001Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis using air-jet sieve apparatus
BS EN ISO 4612:1999Plastics. Preparation of PVC pastes for test purposes. Planetary-mixer method
BS EN ISO 4613-1:1999Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Designation and specification
BS EN ISO 4613-2:1995Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 4894-1:1999Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 4894-2:1999Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 6401:2004Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of residual vinyl chloride monomer. Gas chromatographic method
BS EN ISO 6401:2008Plastics. Poly(vinyl chloride). Determination of residual vinyl chloride monomer. Gas-chromatographic method
BS EN ISO 6402-1:1999Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Designation system and basis for specifications
BS EN ISO 6402-1:2001Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Designation system and basis for specifications
BS EN ISO 6402-1:2002Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Designation system and basis for specifications
BS EN ISO 6402-2:1999Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Preparation of test specimens and determination of properties
BS EN ISO 6402-2:2003Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 7391-1:2000Plastics. Polycarbonate (PC) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 7391-1:2006Plastics. Polycarbonate (PC) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 7391-2:2000Plastics. Polycarbonate (PC) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 7391-2:2006Plastics. Polycarbonate (PC) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 7792-1:2004Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 7792-2:2004Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 8257-1:2006Plastics. Poly(methyl methacrylate)(PMMA) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 8257-2:2006Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 8985:1998Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
BS EN ISO 8986-1:1999Plastics. Polybutene (PB) moulding and extrusion materials Designation system and basis for specifications
BS EN ISO 8986-2:1996Plastics. Polybutene (PB) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 960:1998Plastics. Polyamides (PA). Determination of water content
BS EN ISO 9988-1:2006Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Designation system and basis for specifications
BS ISO 11542-1:1994Plastics. Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials. Designation system and basis for specifications
BS ISO 132:1999* BS 903-A10:1999Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
BS ISO 14898:1999Plastics. Polyurethane raw materials. Aromatic isocyanates Determination of acidity
BS ISO 15373:2001Plastics. Polymer dispersions. Determination of free formaldehyde
BS ISO 1628-5:1998* BS 2782-7:Method 732E:1998 Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Thermoplastic polyester (TP) homopolymers and copolymers
BS ISO 16770:2004Plastics. Determination of environmental stress cracking (ESC) of polyethylene. Full-notch creep test (FNCT)
BS ISO 16790:2005Plastics. Determination of drawing characteristics of thermoplastics in the molten state
BS ISO 22498:2005Plastics. Vinyl chloride homopolymer and copolymer resins. Particle size determination by mechanical sieving
BS ISO 25137-1:2009Plastics. Sulfone polymer moulding and extrusion materials Designation system and basis for specifications
BS ISO 25137-2:2009Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS ISO 2561:2006Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 2580-1:1990Plastics. Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials. Designation
BS ISO 2897-1:1990Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials. Designation
BS ISO 4575:2007Plastics. Poly(vinyl chloride) pastes. Determination of apparent viscosity using the Severs rheometer
BS ISO 4894-1:1990Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials. Designation
BS ISO 6402-1:1990Plastics. Impact resistant acrylonitrile/styrene moulding and extrusion materials (ASA, AES, ACS), excluding butadiene-modified materials. Designation
BS ISO 8257-1:1987Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials. Designation
BS ISO 8257-2:1990Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 9988-1:1998Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Designation system and basis for specifications
BS ISO 9988-2:1999Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS ISO 9988-2:2006Plastics. Polyoxymethylene (POM) moulding and extrusion materials. Preparation of test specimens and determination of properties
IHS experience – your advantage

IHS, formerly known as Technical Indexes, is one of the foremost providers of standards, regulatory, product and supplier information to industries worldwide including construction, health & safety, engineering, education, rail, energy, automotive, defence and many more. With over 45 years experience and more than 6000 customers based in the UK alone, IHS is the only company of its type providing access to several million pages of vital information.

The British Standard Service provided by IHS focuses on supplying you an established, authoritative, reliable and comprehensive information source.

How to subscribe to British Standards Online