| BS 1103:1989 | Specification for fabrics for the reinforcement of rubber hoses |
| BS 3212:1991 | Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations |
| BS 3628:1963 | Specification for hose clips (worm drive type) for general purpose use |
| BS 3832:1991* ISO 1436:1991 | Specification for wire reinforced rubber hoses and hose assemblies for hydraulic installations |
| BS 4089:1999 | Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases |
| BS 4586:1992* ISO 3862:1991 | Specification for spiral wire reinforced rubber covered hydraulic hoses and hose assemblies |
| BS 4749:1991* ISO 4079:1991 | Specification for textile reinforced rubber hydraulic hoses and hose assemblies |
| BS 5118:1980 | Specification for rubber hoses for compressed air |
| BS 5119:1980 | Specification for general purpose rubber water hoses |
| BS 5120:1987 | Specification for rubber hoses for gas welding and allied processes |
| BS 5121:1975 | Specification for rubber sandblast hose |
| BS 5122:1986 | Specification for rubber hoses for low-pressure and medium-pressure saturated steam |
| BS 5173-100:1992 | Method of test for rubber and plastics hoses and hose assemblies. General introduction |
| BS 5173-101.2:1987 | Methods of test for rubber and plastics hoses and hose assemblies. Determination of dimensions. Measurement of length of hoses and hose assemblies |
| BS 5173-102.4:1990 | Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Determination of volumetric expansion of hydraulic hoses |
| BS 5173-102.8:1987 | Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Pressure impulse test for rigid helix reinforced thermoplastics hoses |
| BS 5173-103.13:1994 | Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determination of resistance to fire |
| BS 5173-103.2:1990 | Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determination of crush resistance of hoses |
| BS 5173-103.6:1990 | Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determination of ignitability of lining |
| BS 5173-103.7:1991 | Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses |
| BS 5173-106.2:1990 | Methods of test for rubber and plastics hoses and hose assemblies. Environmental tests. General requirements for high temperature ageing tests |
| BS 5173:Part 102:Section 102.1:1991 | Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Hydrostatic tests |
| BS 5173:Part 102:Section 102.5:1985* ISO 6803-1984 | Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Pressure impulse test for high pressure hydraulic hoses |
| BS 5173:Part 102:Section 102.7:1988* ISO 8032:1987 | Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Pressure impulse test with flexing for high pressure hydraulic hoses (half omega configuration) |
| BS 5173:Part 103:Section 103.12:1988* ISO 8308:1987 | Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determination of vapour transmission of liquids through walls |
| BS 5173:Part 103:Section 103.9:1986* ISO 6945-1983 | Methods of test for rubber and plastics hoses and hose assemblies. Physical tests. Determination of abrasion resistance of the outer cover |
| BS 5244:1986 | Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies |
| BS 5342:1985 | Specification for rubber hoses for high-pressure saturated steam |
| BS 6066:1981* ISO 5774-1980 | Specification for thermoplastics hoses for compressed air |
| BS 6501-1:1991 | Flexible metallic hose assemblies. Specification for corrugated hose assemblies |
| BS 6501-1:2004 | Metal hose assemblies. Guidance on the construction and use of corrugated hose assemblies |
| BS 6501-2:1991 | Flexible metallic hose assemblies. Specification for strip wound hoses and hose assemblies |
| BS 6596:1992* ISO 7751:1991 | Specification for ratios of proof and burst pressure to design working pressure for rubber and plastics hoses and hose assemblies |
| BS 6597:1985* ISO 1307-1983 | Specification for rubber and plastics hoses: internal diameters and tolerances and tolerances on length |
| BS 669:Part 2:1988 | Flexible hoses, end fittings and sockets for gas burning appliances. Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st and 2nd family gases |
| BS 6846:1987* ISO 6806-1984 | Specification for rubber hoses and hose assemblies for use in oil burners |
| BS 7077:Part 2:Section 2.1:1989* EN 29168:1989 * ISO 9168:1988 | Dental handpieces and accessories. Accessories. Specification for hose connectors |
| BS EN 1112:2008 | Sanitary tapware. Shower outlets for sanitary tapware for water supply systems type 1 and type 2. General technical specification |
| BS EN 1113:1997 | Shower hoses for (PN 10) sanitary tapware |
| BS EN 1113:2008 | Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification |
| BS EN 12115:2000 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
| BS EN 12434:2000 | Cryogenic vessels. Cryogenic flexible hoses |
| BS EN 1256:1996 | Gas welding equipment. Specification for hose assemblies for equipment for welding, cutting and allied processes |
| BS EN 1327:1996 | Gas welding equipment. Thermoplastic hoses for welding and allied processes |
| BS EN 13482:2001 | Rubber hoses and hose assemblies for asphalt and bitumen. Specification |
| BS EN 13483:2005 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
| BS EN 1360:2005 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
| BS EN 13765:2003 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals Specification |
| BS EN 13766:2003 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification |
| BS EN 14420-1:2004 | Hose fittings with clamp units. Requirements, survey, designation and testing |
| BS EN 14420-2:2004 | Hose fittings with clamp units. Hose side parts of hose tail |
| BS EN 14420-3:2004 | Hose fittings with clamp units. Clamp units, bolted or pinned |
| BS EN 14420-4:2004 | Hose fittings with clamp units. Flange connections |
| BS EN 14420-5:2004 | Hose fittings with clamp units. Threaded connections |
| BS EN 14420-6:2004 | Hose fittings with clamp units. TW tank truck couplings |
| BS EN 14420-7:2004 | Hose fittings with clamp units. Cam locking couplings |
| BS EN 14420-8:2004 | Hose fittings with clamp units. Symmetrical half coupling (Guillemin system) |
| BS EN 14422:2004 | Clamp type coupling assemblies for LPG transfer hoses |
| BS EN 14423:2004 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| BS EN 14424:2004 | Hose fittings with screwed ferrules |
| BS EN 14540:2004 | Fire-fighting hoses. Non-percolating layflat hoses for fixed systems |
| BS EN 14585-1:2006 | Corrugated metal hose assemblies for pressure applications Requirements |
| BS EN 14800:2007 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| BS EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery. Specification |
| BS EN 1762:2003 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2 5 MPa). Specification |
| BS EN 1763-1:2001 | Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase. Requirements for rubber and plastics tubing and hoses |
| BS EN 1765:1998 | Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
| BS EN 1765:2004 | Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
| BS EN 1947:2002 | Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| BS EN 21746:1993* ISO 1746-1983 | Rubber or plastics hoses and tubing. Bending tests |
| BS EN 24641:1993* ISO 4641:1991 | Rubber hoses for water suction and discharge. Specification |
| BS EN 24671:1993* ISO 4671-1984 | Rubber and plastics hose and hose assemblies. Methods of measurement of dimensions |
| BS EN 24672:1993* ISO 4672:1988 | Rubber and plastics hoses. Sub-ambient temperature flexibility tests |
| BS EN 26801:1993* ISO 6801-1983 | Rubber or plastics hoses. Determination of volumetric expansion |
| BS EN 26802:1993* ISO 6802:1991 | Rubber and plastics hoses and hose assemblies. Wire reinforced. Hydraulic impulse test with flexing |
| BS EN 27326:1993* ISO 7326:1991 | Rubber and plastics hoses. Assessment of ozone resistance under static conditions |
| BS EN 28029:1993* ISO 8029:1985 | Plastics hose. General purpose collapsible water hose, textile reinforced. Specification |
| BS EN 28031:1993* ISO 8031:1987 | Rubber and plastics hoses and hose assemblies. Determination of electrical resistance |
| BS EN 28033:1993* ISO 8033:1991 | Rubber and plastics hose. Determination of adhesion between components |
| BS EN 560:2005 | Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes |
| BS EN 739:1998 | Low-pressure hose assemblies for use with medical gases |
| BS EN 853:1997 | Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification |
| BS EN 854:1997 | Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification |
| BS EN 855:1997 | Plastics hoses and hose assemblies. Thermoplastics textile reinforced hydraulic type. Specification |
| BS EN 856:1997 | Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification |
| BS EN 857:1997 | Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification |
| BS EN ISO 10380:2003 | Pipework. Corrugated metal hoses and hose assemblies |
| BS EN ISO 10806:2003 | Pipework. Fittings for corrugated metal hoses |
| BS EN ISO 10807:1997 | Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere |
| BS EN ISO 10960:1997 | Rubber and plastic hoses. Assessment of ozone resistance under dynamic conditions |
| BS EN ISO 11758:1997 | Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance |
| BS EN ISO 1307:1996 | Rubber and plastics hoses for general-purpose industrial applications. Bore diameters and tolerances, and tolerances on length |
| BS EN ISO 1307:2008 | Rubber and plastics hoses. Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| BS EN ISO 1401:2000 | Rubber hoses for agricultural spraying |
| BS EN ISO 1402:1997 | Rubber and plastics hoses and hose assemblies. Hydrostatic testing |
| BS EN ISO 1403:1997 | Rubber hoses, textile-reinforced, for general-purpose water applications. Specification |
| BS EN ISO 1403:2008 | Rubber hoses, textile-reinforced, for general-purpose water applications. Specification |
| BS EN ISO 15465:2004 | Pipework. Stripwound metal hoses and hose assemblies |
| BS EN ISO 1746:2001 | Rubber or plastics hoses and tubing. Bending tests |
| BS EN ISO 2398:1997 | Rubber hose, textile-reinforced, for compressed air. Specification |
| BS EN ISO 2398:2008 | Rubber hoses, textile-reinforced for compressed air. Specification |
| BS EN ISO 3861:1997 | Rubber hoses for sand and grit blasting. Specification |
| BS EN ISO 3994:2001 | Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials Specification |
| BS EN ISO 4023:1995* ISO 4023:1991 | Rubber hoses for steam. Test methods |
| BS EN ISO 4080:1995 | Rubber and plastics hoses and hose assemblies. Determination of permeability to gas |
| BS EN ISO 4641:2008 | Rubber hoses and hose assemblies for water suction and discharge. Specification |
| BS EN ISO 4671:2001 | Rubber and plastics hoses and hose assemblies. Methods of measurement of dimensions |
| BS EN ISO 4671:2007 | Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| BS EN ISO 4672:1999 | Rubber and plastics hoses. Sub-ambient temperature flexibility tests |
| BS EN ISO 5359:2008 | Low-pressure hose assemblies for use with medical gases |
| BS EN ISO 5774:2001 | Plastics hoses, textile-reinforced, for compressed air. Specification |
| BS EN ISO 5774:2008 | Plastic hoses. Textile-reinforced types for compressed-air applications. Specification |
| BS EN ISO 6134:2005 | Rubber hoses and hose assemblies for saturated steam. Specification |
| BS EN ISO 6224:1997 | Plastics hoses, textile-reinforced, for general-purpose water applications. Specification |
| BS EN ISO 6224:2008 | Thermoplastics hoses, textile-reinforced, for general- purpose water applications. Specification |
| BS EN ISO 6802:2008 | Rubber and plastics hoses and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing |
| BS EN ISO 6803:1997 | Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing |
| BS EN ISO 6803:2008 | Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing |
| BS EN ISO 6945:1996 | Rubber hoses. Determination of abrasion resistance of the outer cover |
| BS EN ISO 7233:1995* ISO 7233:1991 | Rubber and plastics hoses and hose assemblies. Determination of suction resistance |
| BS EN ISO 7233:2008 | Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum |
| BS EN ISO 7326:2008 | Rubber and plastics hoses. Assessment of ozone resistance under static conditions |
| BS EN ISO 7369:2004 | Pipework. Metal hoses and hose assemblies. Vocabulary |
| BS EN ISO 7662:1996 | Rubber and plastics hoses. Determination of abrasion of lining |
| BS EN ISO 7751:1997 | Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to design working pressure |
| BS EN ISO 8030:1998 | Rubber and plastics hoses. Method of test for flammability |
| BS EN ISO 8031:1997 | Rubber and plastics hoses and hose assemblies. Determination of electrical resistance |
| BS EN ISO 8032:1999 | Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test) |
| BS EN ISO 8033:2006 | Rubber and plastics hoses. Determination of adhesion between components |
| BS EN ISO 8308:1996 | Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls |
| BS EN ISO 8308:2008 | Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls |
| BS EN ISO 8330:2000 | Rubber and plastics hoses and hose assemblies. Vocabulary |
| BS EN ISO 8330:2008 | Rubber and plastics hoses and hose assemblies. Vocabulary |
| BS EN ISO 8580:1995 | Rubber and plastics hoses. Determination of ultra-violet resistance under static conditions |
| BS ISO 12151-4:2007 | Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6149 metric stud ends |
| BS ISO 12151-5:2007 | Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-2 37° flared ends |
| BS ISO 13774:1998 | Rubber and plastics hoses for fuels for internal combustion engines. Method of test for flammability |
| BS ISO 13775-1:2000 | Thermoplastic tubing and hoses for automotive use. Non-fuel applications |
| BS ISO 13775-2:2000 | Thermoplastic tubing and hoses for automotive use. Petroleum-based fuel applications |
| BS ISO 15348:2002 | Pipework. Metal bellows expansion joints. General |
| BS ISO 17165-1:2007 | Hydraulic fluid power. Hose assemblies. Dimensions and requirements |
| BS ISO 18752:2006 | Rubber hoses and hose assemblies. Wire- or textile-reinforced single pressure types for hydraulic applications Specification |
| BS ISO 8331:2007 | Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance |
| BS MA 102:1986* ISO 7840:1985 | Specification for fire resistant fuel hoses for small craft |
| DD CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| PD CEN/TR 14585-2:2006 | Corrugated metal hose assemblies for pressure applications Guidance on the use of conformity assessment procedures |
| PD ISO/TR 17165-2:2006 | Hydraulic fluid power. Hose assemblies. Recommended practices for hydraulic hose assemblies |
| PD ISO/TR 17784:2003 | Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
