| BS 2782-8:Method 820A:1996* ISO 2528:1995 | Methods of testing plastics. Other properties. Determination of water vapour transmission rate (dish method) |
| BS 2922-1:1985* ISO 3689-1983 | Strength of wet paper and board. Method for determination of the bursting strength of paper and board after immersion in water |
| BS 2922-2:1984* ISO 3781-1983 | Strength of wet paper and board. Method for determination of the tensile strength of paper and board after immersion in water |
| BS 2924-1:1983* ISO 6588:1981 | Aqueous extracts of paper, board and pulp. Method for determination of pH |
| BS 2924-2:1992* ISO 6587:1992 | Aqueous extracts of paper, board and pulp. Determination of conductivity |
| BS 2924-3:1990* ISO 9198:1989 | Aqueous extracts of paper, board and pulp. Titrimetric method for determination of water-soluble sulphates |
| BS 2924-4:1990* ISO 9197-1:1989 | Aqueous extracts of paper, board and pulp. General method for determination of water-soluble chlorides |
| BS 2987:1958 | Notes on the application of statistics to paper testing |
| BS 3137:1972 | Methods for determining the bursting strength of paper and board |
| BS 3203:1979* ISO 4046-1978 | Glossary of paper, board, pulp and related terms |
| BS 3430:1986* ISO 186-1985 | Method for sampling to determine the average quality of paper and board |
| BS 3432:1980* ISO 536-1976 | Method for determination of grammage of paper and board |
| BS 3631:1984* ISO 2144-1983 | Method for determination of ash of paper and board |
| BS 3748:1992* ISO 2493:1992 | Method for determination of resistance to bending of paper and board |
| BS 4415-1:1992* ISO 1924-1:1992 | Determination of the tensile properties of paper and board Constant rate of loading method |
| BS 4415:Part 2:1986* ISO 1924/2-1985 | Determination of the tensile properties of paper and board Constant rate of elongation method |
| BS 4419:1980* ISO 5626-1978 | Methods for determination of folding endurance of paper |
| BS 4420:1990* ISO 8791-2:1990 | Method for determination of the Bendtsen roughness of paper and board |
| BS 4432-1:1995* ISO 2469:1994 | Methods for determining optical properties of pulp, paper and board. Measurement of diffuse reflectance factor of paper, board and pulps |
| BS 4432-2:1980* ISO 2470-1977 | Methods for determining optical properties of pulp, paper and board. Measurement of diffuse blue reflectance factor (ISO brightness) of paper and board |
| BS 4432:Part 1:1980* ISO 2469-1977 | Methods for determining optical properties of pulp, paper and board. Measurement of diffuse reflectance factor of paper, board and pulps |
| BS 4432:Part 3:1980* ISO 2471-1977 | Methods for determining optical properties of pulp, paper and board. Determination of opacity (paper backing) of paper and board by the diffuse reflectance method |
| BS 4497:1969 | Recommendations for the detection and estimation of nitrogenous treating agents in paper |
| BS 4574:1970 | Recommendation for the determination of the ink absorbency of paper and board by use of K & N ink |
| BS 4616:1970 | Recommendations for the determination of the compressibility of paper and board by the Bendtsen method |
| BS 4685:1971 | Method for the determination of the wax content of waxed paper and board |
| BS 4686:1971 | Method for the determination of the flat crush resistance of single faced and single wall corrugated fibreboard |
| BS 4747-2:1995* ISO 801-2:1994 | Methods for determination of saleable mass, in lots, of pulp. Pulps (such as flash-dried pulps) baled in slabs |
| BS 4747:Part 2:1980* ISO 801/2-1979 | Methods for determination of saleable mass, in lots, of pulp. Pulps (such as flash-dried) baled in slabs |
| BS 4816:1972 | Method for the determination of the puncture resistance of board |
| BS 4817:1972 | Method for the determination of the thickness of corrugated fibreboard |
| BS 4818:1993 | Method for determination of the creasing quality of carton board (Pira method) |
| BS 5131-4.12:1990 | Methods of test for footwear and footwear materials. Other components. Fastness of fibreboard finishes to rubbing in the presence of water and perspiration |
| BS 5131-4.13:1976 | Methods of test for footwear and footwear materials. Other components. Transverse tensile strength of fibreboard |
| BS 5131-4.1:1975 | Methods of test for footwear and footwear materials. Other components. Resistance to peeling of insole board |
| BS 5131-4.2:1990 | Methods of test for footwear and footwear materials. Other components. Flexing index of fibreboard |
| BS 5131-4.3:1990 | Methods of test for footwear and footwear materials. Other components. Resistance of fibre board to stitch-tear |
| BS 5131-4.4:1990 | Methods of test for footwear and footwear materials. Other components. Heel pin holding strength of fibreboard |
| BS 5131-4.5:1990 | Methods of test for footwear and footwear materials. Other components. Tensile strength of fibreboard |
| BS 5477:1977 | Method for visual assessment, by grid assay, of dirt in paper for character recognition |
| BS 5879:1980* ISO 5635-1978 | Method for measurement of dimensional change of paper after immersion in water |
| BS 5880:1990* ISO 5637:1989 | Method for determination of water absorption of paper and board after immersion in water |
| BS 5881:1980* ISO 5638-1978 | Method for determination of grammage of single layers of solid fibreboard |
| BS 6036:1985 | Method for determination of the edgewise crush resistance of corrugated fibreboard |
| BS 6225-1:1982* ISO 3782-1980 | Method for determining the resistance to picking of paper and board: accelerating speed method using the IGT tester. Pendulum or spring model |
| BS 6225-2:1982* ISO 3783-1980 | Method for determining the resistance to picking of paper and board: accelerating speed method using the IGT tester. Electric model |
| BS 6388-1:1991* ISO 5630-1:1991 | Accelerated ageing of paper and board. Method for dry heat treatment at 105°C |
| BS 6388-2:1987* ISO 5630-4:1986 | Accelerated ageing of paper and board. Method for dry heat treatment at 120°C or 150°C |
| BS 6388-3:1996* ISO 5630-3:1996 | Accelerated ageing of paper and board. Method for moist heat treatment at 80°C and 65% relative humidity |
| BS 6388:Part 3:1987* ISO 5630/3-1986 | Accelerated ageing of paper and board. Method for moist heat treatment at 80°C and 65% relative humidity |
| BS 6504:1984 | Method for determination of water absorption of paper and board (Klemm method) |
| BS 6538-1:1985* ISO 5636-1:1984 | Air permeance of paper and board. Method for determination of air permeance: general aspects of testing |
| BS 6538-2:1992* ISO 5636-3:1992 | Air permeance of paper and board. Method for determination of air permeance using the Bendtsen apparatus |
| BS 6538-3:1987* ISO 5636-5:1986 | Air permeance of paper and board. Method for determination of air permeance using the Gurley apparatus |
| BS 6563:1985 | Method for determination of the roughness of paper and board by the Parker Print-surf apparatus |
| BS 6712-1:1995* ISO 8226-1:1994 | Measurement of hygroexpansivity of paper and board. Method for the measurement of hygroexpansivity up to a maximum relative humidity of 68% |
| BS 6712-2:1991* ISO 8226-2:1990 | Measurement of hygroexpansivity of paper and board. Method for measurement of hygroexpansivity up to a maximum relative humidity of 86% |
| BS 6712:Part 1:1986* ISO 8226/1-1985 | Measurement of hygroexpansivity of paper and board. Method for measurement of hygroexpansivity up to a maximum relative humidity of 68% |
| BS 6844:1987 | Method for determination of the flat crush resistance of corrugating medium after laboratory fluting (CMT Concora Medium Test) |
| BS 6890:1987* ISO 5634-1986 | Method for determination of grease resistance of paper and board |
| BS 6965-1:1988 | Creasing properties of carton board. Method for determination of crease recovery (spring back) of 90° fold |
| BS 7325:1990* ISO 9895:1989 | Method for determination of the compressive strength of paper and board by the short span test |
| BS 7406:1991* ISO 9932:1990 | Methods for determination of water vapour transmission rate of sheet materials (paper and board) by dynamic sweep and static gas methods |
| BS 7424:1991* ISO 5628:1990 | Guide to general principles for determination of the bending stiffness of paper and board by static methods |
| BS 7427:1991* ISO 5647:1990 | Method for determination of titanium dioxide content of paper and board |
| BS 7463-1:1991* ISO 9184-1:1990 | Fibre furnish analysis of paper, board and pulps. General method |
| BS 7463-2:1991* ISO 9184-2:1990 | Fibre furnish analysis of paper, board and pulps. Guide to staining |
| BS 7463-3:1991* ISO 9184-3:1990 | Fibre furnish analysis of paper, board and pulps. Method of test by Herzberg stain |
| BS 7463-4:1991* ISO 9184-4:1990 | Fibre furnish analysis of paper, board and pulps. Method of test by Graff 'C' stain |
| BS 7463-5:1991* ISO 9184-5:1990 | Fibre furnish analysis of paper, board and pulps. Method of test by Lofton-Merritt stain (Wisbar modification) |
| BS 7463-6:1995* ISO 9184-6:1994 | Fibre furnish analysis of paper, board and pulps. Determination of fibre coarseness |
| BS 7500:1995 | Specification for marking of recycled paper board |
| BS EN 1104:1996 | Paper and board intended to come into contact with foodstuffs. Determination of transfer of antimicrobic constituents |
| BS EN 1104:2005 | Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents |
| BS EN 1230-1:2001 | Paper and board intended for contact with foodstuffs. Sensory analysis. Odour |
| BS EN 1230-2:2001 | Paper and board intended for contact with foodstuffs. Sensory analysis. Off-flavour (taint) |
| BS EN 12497:2005 | Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of mercury in an aqueous extract |
| BS EN 12498:2005 | Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of cadmium and lead in an aqueous extract |
| BS EN 13676:2001 | Polymer coated paper and board intended for food contact. Detection of pinholes |
| BS EN 14086:2003 | Paper and board. Measurement of specular gloss. 45° gloss with a parallel beam, DIN method |
| BS EN 14719:2005 | Pulp, paper and board. Determination of the diisopropylnaphthalene (DIPN) content by solvent extraction |
| BS EN 1541:1998 | Paper and board intended to come into contact with foodstuffs. Determination of formaldehyde in an aqueous extract |
| BS EN 1541:2001 | Paper and board intended to come into contact with foodstuffs. Determination of formaldehyde in an aqueous extract |
| BS EN 15519:2007 | Paper and board intended to come into contact with foodstuffs. Preparation of an organic solvent extract |
| BS EN 20187:1993* ISO 187:1990 | Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| BS EN 20287:1994* ISO 287:1985 | Paper and board. Determination of moisture content. Oven-drying method |
| BS EN 20534:1993* ISO 534:1988 | Method for determination of thickness and apparent bulk density or apparent sheet density of paper and board |
| BS EN 20535:1994* ISO 535:1991 | Paper and board. Determination of water absorptiveness. Cobb method |
| BS EN 21974:1994* ISO 1974:1990 | Paper. Determination of tearing resistance (Elmendorf method) |
| BS EN 23035:1994* ISO 3035:1982 | Single-faced and single-wall corrugated fibreboard. Determination of flat crush resistance |
| BS EN 25651:1993* ISO 5651:1989 | Specification for units for expressing properties of paper board and pulps |
| BS EN 643:1994 | List of European standard qualities of waste paper |
| BS EN 643:2002 | Paper and board. European list of standard grades of recovered paper and board |
| BS EN 644:1994 | Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances. Expression of direction of manufacture |
| BS EN 644:1999 | Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances, expression of direction of manufacture |
| BS EN 645:1994 | Paper and board intended to come into contact with foodstuffs. Preparation of a cold water extract |
| BS EN 646:1994 | Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board |
| BS EN 646:2001 | Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board |
| BS EN 646:2006 | Paper and board intended to come into contact with foodstuffs. Determination of colour fastness of dyed paper and board |
| BS EN 647:1994 | Paper and board intended to come into contact with foodstuffs. Preparation of a hot water extract |
| BS EN 648:1994 | Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board |
| BS EN 648:2003 | Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board |
| BS EN 648:2006 | Paper and board intended to come into contact with foodstuffs. Determination of the fastness of fluorescent whitened paper and board |
| BS EN 920:1995 | Paper and board intended to come into contact with foodstuffs. Determination of water soluble matter |
| BS EN 920:1998 | Paper and board intended to come into contact with foodstuffs. Determination of dry matter content in an aqueous extract |
| BS EN 920:2001 | Paper and board intended to come into contact with foodstuffs. Determination of dry matter content in an aqueous extract |
| BS EN ISO 15318:2000 | Pulp, paper and board. Determination of 7 specified polychlorinated biphenyls (PCB) |
| BS EN ISO 15320:2003 | Pulp, paper and board. Determination of pentachlorophenol in an aqueous extract |
| BS EN ISO 15755:2000 | Paper and board. Estimation of contraries |
| BS EN ISO 186:1996 | Paper and board. Sampling to determine average quality |
| BS EN ISO 186:2002 | Paper and board. Sampling to determine average quality |
| BS EN ISO 1924-2:1995 | Paper and board. Determination of tensile properties. Constant rate of elongation method |
| BS EN ISO 1924-2:2008 | Paper and board. Determination of tensile properties. Constant rate of elongation method (20 mm/min) |
| BS EN ISO 2758:2003 | Paper. Determination of bursting strength |
| BS EN ISO 2759:2003 | Board. Determination of bursting strength |
| BS EN ISO 3037:1996 | Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method) |
| BS EN ISO 3037:2007 | Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method) |
| BS EN ISO 534:2005 | Paper and board. Determination of thickness, density and specific volume |
| BS EN ISO 536:1997 | Paper and board. Determination of grammage |
| BS EN ISO 638:2008 | Paper, board and pulps. Determination of dry matter content. Oven-drying method |
| BS EN ISO 7263:1995 | Corrugating medium. Determination of the flat crush resistance after laboratory fluting |
| BS EN ISO 7263:2008 | Corrugating medium. Determination of the flat crush resistance after laboratory fluting |
| BS EN ISO 8254-1:2003 | Paper and board. Measurement of specular gloss. 75° gloss with a converging beam, TAPPI method |
| BS EN ISO 8254-1:2009 | Paper and board. Measurement of specular gloss. 75 degree gloss with a converging beam, TAPPI method |
| BS EN ISO 8254-2:2003 | Paper and board. Measurement of specular gloss. 75° gloss with a parallel beam, DIN method |
| BS EN ISO 9706:2000 | Information and documentation. Paper for documents. Requirements for permanence |
| BS ISO 10716:1994 | Paper and board. Determination of alkali reserve |
| BS ISO 10775:1995 | Paper, board and pulps. Determination of cadmium content. Atomic absorption spectrometric method |
| BS ISO 11093-6:2005 | Paper and board. Testing of cores. Determination of bending strength by the three-point method |
| BS ISO 11093-9:2006 | Paper and board. Testing of cores. Determination of flat crush resistance |
| BS ISO 11108:1996 | Information and documentation. Archival paper. Requirements for permanence and durability |
| BS ISO 11475:1999 | Paper and board. CIE whiteness, D65/10 degrees (outdoor daylight) |
| BS ISO 11475:2007 | Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight) |
| BS ISO 11476:2000 | Paper and board. Determination of CIE whiteness, C/2° (indoor illumination conditions) |
| BS ISO 11480:1997 | Pulp, paper and board. Determination of total chlorine and organically bound chlorine |
| BS ISO 11556:1998 | Paper and board. Determination of curl using a single vertically suspended test piece |
| BS ISO 11556:2005 | Paper and board. Determination of curl using a single vertically suspended test piece |
| BS ISO 11605:1995 | Paper and board. Calibration of variable-area flowmeters |
| BS ISO 12192:2002 | Paper and board. Compressive strength. Ring crush method |
| BS ISO 13542:1995 | Paper and board. Specification for internal diameters of cores for reels |
| BS ISO 13542:2006 | Paper and board. Specification for internal diameters of cores for reels |
| BS ISO 13820:1996 | Paper, board and corrugated fibreboard. Description and calibration of compression testing equipment |
| BS ISO 13821:2001 | Corrugated fibreboard. Determination of edgewise crush resistance. Waxed edge method |
| BS ISO 15359:1999 | Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method |
| BS ISO 15754:2009 | Paper and board. Determination of z-directional tensile strength |
| BS ISO 16532-2:2007 | Paper and board. Determination of grease resistance. Surface repellency test |
| BS ISO 1762:2001 | Paper, board and pulps. Determination of residue (ash) on ignition at 525°C |
| BS ISO 17812:2007 | Paper, board and pulps. Determination of total magnesium, total calcium, total manganese, total iron and total copper |
| BS ISO 1830:2005 | Paper, board and pulps. Determination of acid-soluble manganese |
| BS ISO 1924-3:2005 | Paper and board. Determination of tensile properties. Constant rate of elongation method (100 mm/min) |
| BS ISO 2144:1997 | Paper, board and pulps. Determination of residue (ash) on ignition at 900°C |
| BS ISO 22891:2007 | Paper. Determination of transmittance by diffuse reflectance measurement |
| BS ISO 2469:2007 | Paper, board and pulps. Measurement of diffuse radiance factor |
| BS ISO 2470:1999 | Paper, board and pulps. Measurement of diffuse blue reflectance factor (ISO brightness) |
| BS ISO 2471:1998 | Paper and board. Determination of opacity (paper backing). Diffuse reflectance method |
| BS ISO 3783:2006 | Paper and board. Determination of resistance to picking. Accelerated speed method using the IGT-type tester (electric model) |
| BS ISO 4046-1:2002 | Paper, board, pulps and related terms. Vocabulary. Alphabetical index |
| BS ISO 4046-2:2002 | Paper, board, pulps and related terms. Vocabulary. Pulping terminology |
| BS ISO 4046-3:2002 | Paper, board, pulps and related terms. Vocabulary. Paper-making terminology |
| BS ISO 4046-4:2002 | Paper, board, pulps and related terms. Vocabulary. Paper and board grades and converted products |
| BS ISO 4046-5:2002 | Paper, board, pulps and related terms. Vocabulary. Properties of pulp, paper and board |
| BS ISO 4094:2005 | Paper, board and pulps. International calibration of testing apparatus. Nomination and acceptance of standardizing and authorized laboratories |
| BS ISO 5626:1993 | Paper. Determination of folding endurance |
| BS ISO 5631:2000 | Paper and board. Determination of colour (C/2°). Diffuse reflectance method |
| BS ISO 5636-4:2005 | Paper and board. Determination of air permeance (medium range). Sheffield method |
| BS ISO 5636-5:2003 | Paper and board. Determination of air permeance and air resistance (medium range). Gurley method |
| BS ISO 6588-1:2005 | Paper, board and pulps. Determination of pH of aqueous extracts. Cold extraction |
| BS ISO 6588-2:2005 | Paper, board and pulps. Determination of pH of aqueous extracts. Hot extraction |
| BS ISO 777:2001 | Paper, board and pulp. Determination of calcium |
| BS ISO 777:2005 | Paper, board and pulp. Determination of acid-soluble calcium |
| BS ISO 778:2001 | Paper, board and pulp. Determination of copper |
| BS ISO 778:2005 | Paper, board and pulp. Determination of acid-soluble copper |
| BS ISO 779:2001 | Paper, board and pulp. Determination of iron |
| BS ISO 779:2005 | Paper, board and pulp. Determination of acid-soluble iron |
| BS ISO 8254-3:2004 | Paper and board. Measurement of specular gloss. 20 degree gloss with a converging beam, TAPPI method |
| BS ISO 8784-1:2005 | Pulp, paper and board. Microbiological examination. Total count of bacteria, yeast and mould based on disintegration |
| BS ISO 8791-3:2005 | Paper and board. Determination of roughness/smoothness (air leak methods). Sheffield method |
| BS ISO 8791-4:2007 | Paper and board. Determination of roughness/smoothness (air leak methods). Print-surf method |
| BS ISO 9197:1998 | Paper, board and pulps. Determination of water-soluble chlorides |
| BS ISO 9197:2006 | Paper and board. Determination of water-soluble chlorides |
| BS ISO 9198:2001 | Paper, board and pulp. Determination of water-soluble sulfates |
| BS ISO 9416:2009 | Paper. Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| DD ENV 12497:1998 | Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of mercury in an aqueous extract |
| DD ENV 12498:1998 | Paper and board intended to come into contact with foodstuffs. Determination of cadmium, lead and chromium in an aqueous extract |
| DD ENV 1798:1996 | Paper and board intended to come into contact with foodstuffs. Determination of seven specified polychlorinated biphenyls (PCB) |
| PD CEN/TR 15645-1:2008 | Paper and board intended to come into contact with foodstuffs. Calibration of the off-flavour test. Odour |
| PD CEN/TR 15645-2:2008 | Paper and board intended to come into contact with foodstuffs. Calibration of the off-flavour test. Fatty food |
| PD CEN/TR 15645-3:2008 | Paper and board intended to come into contact with foodstuffs. Calibration of the off-flavour test. Dry food |
| PD CR 14376:2002 | Adhesives. Ahesives for paper and board, packaging and disposable sanitary products. Description and assessment of the setting process |
| PD ISO/TR 25477:2008 | Paper, board and pulps. Basic guidelines for image analysis measurements |
