| BS 1070:1993 | Specification for black paint (tar-based) |
| BS 1284:1960 | Specification for bleached lac |
| BS 2015:1992 | Glossary of paint and related terms |
| BS 2523:1966 | Specification for lead-based priming paints |
| BS 3279:1960 | Specification for seedlac |
| BS 3280:1960 | Specification for hand-made shellac |
| BS 3698:1964 | Specification for calcium plumbate priming paints |
| BS 3722:1964 | Specification for machine-made shellac |
| BS 3900-0:1989 | Methods of test for paints. General introduction |
| BS 3900-A10:1998* ISO 3233:1998 | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating |
| BS 3900-A11:1974 | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Small scale test for combustibility |
| BS 3900-A16:1986* ISO 7254:1984 | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of natural spreading rate by brush application |
| BS 3900-A17:1986* ISO 7877-1984 | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Coating of test panels at a specified spreading rate |
| BS 3900-A5:1991 | Methods of test for paints. Large-scale brushing tests for paints and varnishes |
| BS 3900-A7:1968 | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of the viscosity of paint at a high rate of shear |
| BS 3900-B10:1986* ISO 3856-5:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of hexavalent chromium content of solid matter |
| BS 3900-B11:1986* ISO 3856-6:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total chromium content of liquid matter |
| BS 3900-B12:1986* ISO 3856-7:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' mercury content |
| BS 3900-B15:1987 | Methods of test for paints. Rapid method for estimation of lead in liquid paints |
| BS 3900-B16:1990* ISO 7252:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total mercury |
| BS 3900-B3:1983 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' lead in the solid matter in liquid paints: method for use in conjunction with The Control of Lead at Work Regulations, 1980 (S.I. 1980 No. 1248) |
| BS 3900-B4:1986* ISO 6503:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total lead in paints and similar materials |
| BS 3900-B5:1986* ISO 6713:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Preparation of acid extracts from liquid paints or coating powders |
| BS 3900-B6:1986* ISO 3856-1:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' lead content |
| BS 3900-B7:1986* ISO 3856-2:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' antimony content |
| BS 3900-B8:1986* ISO 3856-3:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' barium content |
| BS 3900-B8:1986* ISO 3856-3:1984 | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Test for flash/no flash (closed cup equilibrium method) |
| BS 3900-B9:1986* ISO 3856-4:1984 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of 'soluble' cadmium content |
| BS 3900-B9:1986* ISO 3856-4:1984 | Methods of test for paints. Determination of flashpoint (closed cup equilibrium method) |
| BS 3900-C1:1965 | Methods of test for paints. Tests associated with paint film formation. Wet edge time |
| BS 3900-C6:1983* EN 21524:1991* ISO 1524:1983 | Methods of test for paints. Tests associated with paint film formation. Determination of fineness of grind |
| BS 3900-C9:1982* ISO 4627:1981 | Methods of test for paints. Tests associated with paint film formation. Methods for evaluation of the compatibility of a product with a surface to be painted |
| BS 3900-D10:1986* ISO 7724-3:1984 | Methods of test for paints. Determination of colour and colour difference: calculation |
| BS 3900-D11:1998* ISO 6504-3:1998 | Methods of test for paints. Optical tests on paint films. Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate |
| BS 3900-D4:1974 | Methods of test for paints. Optical tests on paint films. Comparison of contrast ratio (hiding power) of paints of the same type and colour |
| BS 3900-D6:1982* ISO 3906:1980 | Methods of test for paints. Optical tests on paint films. Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate, using polyester film |
| BS 3900-D8:1986* ISO 7724-1:1984 | Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: principles |
| BS 3900-D9:1986* ISO 7724-2:1984 | Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: measurement |
| BS 3900-E12.1:2000* ISO 6441-1:1999 | Methods of test for paints. Determination of Knoop hardness by measurement of the indentation length using a microscope |
| BS 3900-E12.2:2000* ISO 6441-2:1999 | Methods of test for paints. Determination of Knoop hardness by measurement of the indentation depth |
| BS 3900-E12:1986* ISO 6441-1984 | Methods of test for paints. Indentation test (spherical or pyramidal) |
| BS 3900-E19:1999* ISO 15184:1998 | Methods of test for paints. Determination of film hardness by pencil test |
| BS 3900-E1:1970 | Methods of test for paints. Bend test (cylindrical mandrel) |
| BS 3900-E3:1973 | Methods of test for paints. Impact (falling weight) resistance |
| BS 3900-E7:1974 | Methods of test for paints. Resistance to impact (falling ball test) |
| BS 3900-E8:1974 | Methods of test for paints. Resistance to impact (pendulum test) |
| BS 3900-F10:1985 | Methods of test for paints. Determination of resistance to cathodic disbonding of coatings for use in marine environments |
| BS 3900-F11:1985 | Methods of test for paint. Durability tests on paint films Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures |
| BS 3900-F15:1995* ISO 11503:1995 | Methods of test for paints. Determination of resistance to humidity (intermittent condensation) |
| BS 3900-F18:1998* ISO 11997-1:1998 | Methods of test for paint. Durability tests on paint films Determination of resistance to corrosion under a wet (salt fog)/dry/humidity cycle |
| BS 3900-F2:1973 | Methods of test for paint. Durability tests on paint films Determination of resistance to humidity (cyclic condensation) |
| BS 3900-F4:1968 | Methods of test for paints. Resistance to continuous salt spray |
| BS 3900-F5:1972 | Methods of test for paints. Determination of light fastness of paints for interior use exposed to artificial light sources |
| BS 3900-F6:1976 | Methods of test for paint. Durability tests on paint films Notes for guidance on the conduct of natural weathering test |
| BS 3900-G6:1989 | Methods of test for paints. Assessment of resistance to fungal growth |
| BS 3900-H1:1983* ISO 4628-1:1982 | Methods of test for paints. Evaluation of paint and varnish defects. Designation of intensity, quantity and size of common types of defect: general principles and rating schemes |
| BS 3900-H2:1983* ISO 4628-2:1982 | Methods of test for paints. Evaluation of paint and varnish defects. Designation of degree of blistering |
| BS 3900-H3:1983* ISO 4628-3:1982 | Methods of test for paints. Evaluation of paint and varnish defects. Designation of degree of rusting |
| BS 3900-H4:1983* ISO 4628-4:1982 | Methods of test for paints. Evaluation of paint and varnish defects. Designation of degree of cracking |
| BS 3900-H5:1983* ISO 4628-5:1982 | Methods of test for paints. Evaluation of paint and varnish defects. Designation of degree of flaking |
| BS 3900-J10:1998* ISO 8130-10:1998 | Methods of test for paints. Testing of coating powders. Determination of deposition efficiency of coating powders |
| BS 3900-J11:1997* ISO 8130-11:1997 | Methods of test for paints. Testing of coating powders. Determination of flow of coating powders (inclined-plane method) |
| BS 3900-J12:1998* ISO 8130-12:1998 | Methods of test for paints. Testing of coating powders. Determination of compatibility of coating powders |
| BS 3900-J13:2001* ISO 8130-13:2001 | Methods of test for paints. Testing of coating powders. Particle size analysis by laser diffraction |
| BS 3900-J2:1993* ISO 8130-1:1992 | Methods of test for paints. Testing of coating powders. Determination of particle size distribution of coating powders by sieving |
| BS 3900-J3:1998* ISO 8130-6:1992 and Amd1:1998 | Methods of test for paints. Testing of coating powders. Determination of gel time of coating powders |
| BS 3900-J4:1995* ISO 8130-8:1994 | Methods of test for paints. Determination of the storage stability of coating powders |
| BS 3900-J5:1993* ISO 8130-7:1992 | Methods of test for paints. Testing of coating powders. Determination of loss of mass of coating powders on heating |
| BS 3900-J6:1993* ISO 8130-2:1992 | Methods of test for paints. Testing of coating powders. Determination of density of coating powders by gas comparison pyknometer (referee method) |
| BS 3900-J7:1993* ISO 8130-3:1992 | Methods of test for paints. Testing of coating powders. Determination of density of coating powders by liquid displacement pyknometer |
| BS 3900-J8:1993* ISO 8130-4:1992 | Methods of test for paints. Testing of coating powders. Calculation of lower explosion limit of coating powders |
| BS 3900-J9:1993* ISO 8130-5:1992 | Methods of test for paints. Testing of coating powders. Determination of flow properties of a coating powder/air mixture |
| BS 3900:Part A10:1985* ISO 3233-1984 | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of volume of dry coating (non-volatile matter) obtained from a given volume of liquid coating |
| BS 3900:Part A12:1975 | Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of density |
| BS 3900:Part A13:1978* ISO 3680-1976 | Methods of test for paints. Test for flash/no flash (rapid equilibrium method) |
| BS 3900:Part B1:1965 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of water by the Dean and Stark method |
| BS 3900:Part B2:1970 | Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of volatile matter and non-volatile matter |
| BS 3900:Part C5:1992* ISO 2808:1991 | Methods of test for paints. Tests associated with paint film formation. Determination of film thickness |
| BS 3900:Part D1:1978* ISO 3668-1976 | Methods of test for paints. Optical tests on paint films. Visual comparison of the colour of paints |
| BS 3900:Part D5:1980* ISO 2813-1978 | Methods of test for paints. Optical tests on paint films. Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° |
| BS 3900:Part D5:1995* ISO 2813:1994 | Methods of test for paints. Optical tests on paint films. Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° |
| BS 3900:Part E4:1976 | Methods of test for paints. Mechanical tests on paint films. Cupping test |
| BS 3900:Part E5:1973 | Methods of test for paints. Pendulum damping test |
| BS 3900:Part E6:1974 | Methods of test for paints. Cross-cut test |
| BS 3900:Part F12:1985* ISO 7253-1984 | Methods of test for paint. Durability tests on paint films Determination of resistance to neutral salt spray |
| BS 3900:Part F3:1971 | Methods of test for paint. Durability tests on paint films Resistance to artificial weathering (enclosed carbon arc) |
| BS 3900:Part F3:Addendum No. 1:1978 | Methods of test for paint. Durability tests on paint films Notes for guidance on the operation of artificial weathering apparatus to BS 3900:Part F3:1971 |
| BS 3900:Part G7:1976 | Methods of test for paints. Environmental tests on paint films (including tests for resistance to corrosion and chemicals). Determination of the effect of heat |
| BS 3900:Part J3:1993* ISO 8130-6:1992 | Methods of test for paints. Testing of coating powders. Determination of the gelation time of coating powders |
| BS 3900:Part J4:1987 | Methods of test for paints. Testing of coating powders. Determination of the storage stability of coating powders |
| BS 3996:1978 | Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels) |
| BS 4310:1968 | Specification for permissible limit of lead in low-lead paints and similar materials |
| BS 4479-4:1990 | Design of articles that are to be coated. Recommendations for paint coatings and varnish coatings |
| BS 4652:1971 | Specification for metallic zinc-rich priming paint (organic media) |
| BS 4652:1995 | Specification for zinc-rich priming paint (organic media) |
| BS 4726:1986* ISO 842-1984 | Methods for sampling raw materials for paints and varnishes |
| BS 4756:1971 | Specification for ready mixed aluminium priming paints for woodwork |
| BS 4756:1998 | Specification for ready-mixed aluminium priming paints for woodwork |
| BS 4764:1986 | Specification for powder cement paints |
| BS 4800:1989 | Schedule of paint colours for building purposes |
| BS 5044:1973 | Specification for contrast aid paints used in magnetic particle flaw detection |
| BS 5082:1993 | Specification for water-borne priming paints for woodwork |
| BS 5358:1993 | Specification for solvent-borne priming paints for woodwork |
| BS 7557:1992 | Specification for limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs |
| BS 7664:1993 | Specification for undercoat and finishing paints |
| BS 7664:2000 | Specification for undercoat and finishing paints |
| BS 7719:1994 | Specification for water-borne emulsion paints for interior use |
| BS 7779:1994 | Specification for semi-transparent priming stains (stain basecoats) for joinery |
| BS 7897-1:1997* ISO 56-1:1979 | Specification for lac and shellac. Hand-made shellac |
| BS 7897-2:1997* ISO 56-2:1979 | Specification for lac and shellac. Machine-made shellac |
| BS 7897-3:1997* ISO 57:1975 | Specification for lac and shellac. Bleached lac |
| BS 7956:2000 | Specification for primers for woodwork |
| BS AU 148-10:1969 | Methods of test for motor vehicle paints. Resistance to heat and corrosion |
| BS AU 148-11:1969 | Methods of test for motor vehicle paints. Resistance to blistering |
| BS AU 148-12:1969 | Methods of test for motor vehicle paints. Resistance to accelerated weathering |
| BS AU 148-13:1969 | Methods of test for motor vehicle paints. Resistance to deterioration by contact with other materials |
| BS AU 148-14:1969 | Methods of test for motor vehicle paints. Resistance to outdoor exposure |
| BS AU 148-15:1969 | Methods of test for motor vehicle paints. Resistance to chipping |
| BS AU 148-2:1969 | Methods of test for motor vehicle paints. Resistance to continuous salt spray |
| BS AU 148-3:1969 | Methods of test for motor vehicle paints. Flexibility and adhesion |
| BS AU 148-4:1969 | Methods of test for motor vehicle paints. Resistance to abrasion |
| BS AU 148-5:1969 | Methods of test for motor vehicle paints. Gloss measurement |
| BS AU 148-6:1969 | Methods of test for motor vehicle paints. Hardness |
| BS AU 148-9:1969 | Methods of test for motor vehicle paints. Resistance to dry heat |
| BS EN 1062-11:2002 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Methods of conditioning before testing |
| BS EN 1062-1:1997 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Classification |
| BS EN 1062-1:2004 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Classification |
| BS EN 1062-3:1999 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination and classification of liquid-water transmission rate (permeability) |
| BS EN 1062-3:2008 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of liquid water permeability |
| BS EN 1062-6:2002 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of carbon dioxide permeability |
| BS EN 1062-7:2004 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of crack bridging properties |
| BS EN 12206-1:2004 | Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from coating powder |
| BS EN 13300:2001 | Paints and varnishes. Water-borne coating materials and coating systems for interior walls and ceilings. Classification |
| BS EN 13438:2005 | Paints and varnishes. Powder organic coatings for galvanized or sherardised steel products for construction purposes |
| BS EN 15060:2006 | Paints and varnishes. Guide for the classification and selection of coating systems for wood based materials in furniture for interior use |
| BS EN 15457:2007 | Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against fungi |
| BS EN 15458:2007 | Paints and varnishes. Laboratory method for testing the efficacy of film preservatives in a coating against algae |
| BS EN 21512:1994* BS 3900-A1:1992* ISO 1512:1991 | Methods of test for paints. Sampling |
| BS EN 23270:1991* ISO 3270:1984 | Specification for temperatures and humidities for conditioning and testing paints, varnishes and their raw materials |
| BS EN 24624:1993* ISO 4624:1978 | Paints and varnishes. Pull-off test |
| BS EN 29117:1992* ISO 9117:1990 | Methods of test for paints. Tests associated with paint film formation. Paints and varnishes. Determination of through-dry state and through-dry time. Method of test |
| BS EN 456:1991 | Method for determination of flashpoint of paints, varnishes and related products by the rapid equilibrium method |
| BS EN 535:1991 | Method for determination of flow time of paints by use of flow cups |
| BS EN 605:1992 | Paints and varnishes. Standard panels for testing |
| BS EN 71-7:2002 | Safety of toys. Finger paints. Requirements and test methods |
| BS EN 927-1:1997 | Paints and varnishes. Coating materials and coating systems for exterior wood. Classification and selection |
| BS EN 927-2:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification |
| BS EN 927-3:2000 | Paints and varnishes. Coating materials and coating systems for exterior wood. Natural weathering test |
| BS EN 927-3:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood. Natural weathering test |
| BS EN 927-4:2000 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of the water-vapour permeability |
| BS EN 927-5:2000 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of the liquid water permeability |
| BS EN 927-5:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of the liquid water permeability |
| BS EN 927-6:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood. Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| BS EN 971-1:1996 | Paints and varnishes. Terms and definitions for coating materials. General terms |
| BS EN ISO 11341:1998* BS 3900-F14:1995 | Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation |
| BS EN ISO 11341:2004* BS 3900-F14:2004 | Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation |
| BS EN ISO 11507:2001* BS 3900-F16:1997 | Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV and water |
| BS EN ISO 11507:2007* BS 3900-F16:2007 | Paints and varnishes. Exposure of coatings to artificial weathering. Exposure to fluorescent UV lamps and water |
| BS EN ISO 11890-1:2001* BS 3900-A23:2000 | Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method |
| BS EN ISO 11890-1:2007 | Paints and varnishes. Determination of volatile organic compound (VOC) content. Difference method |
| BS EN ISO 11890-2:2001* BS 3900-A24:2000 | Paints and varnishes. Determination of volatile organic compound (VOC) content. Gas chromatographic method |
| BS EN ISO 11890-2:2006 | Paints and varnishes. Determination of volatile organic compound (VOC) content. Gas-chromatographic method |
| BS EN ISO 11997-1:2006 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humidity |
| BS EN ISO 11997-2:2006* BS 3900-F19:2006 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions. Wet (salt fog)/dry/humidity/UV light |
| BS EN ISO 11998:2001* BS 3900-F17:1998 | Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings |
| BS EN ISO 11998:2006 | Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings |
| BS EN ISO 12137-1:2006* BS 3900-E17:1997 | Paints and varnishes. Determination of mar resistance. Method using a curved stylus |
| BS EN ISO 12137-2:2006* BS 3900-E18:1997 | Paints and varnishes. Determination of mar resistance. Method using a pointed stylus |
| BS EN ISO 13803:2004* BS 3900-D13:2000 | Paints and varnishes. Determination of reflection haze on paint films at 20 degrees |
| BS EN ISO 1513:1995* BS 3900-A2:1993 | Paints and varnishes. Examination and preparation of samples for testing |
| BS EN ISO 1514:2004* BS 3900-A3:2004 | Paints and varnishes. Standard panels for testing |
| BS EN ISO 1516:2002* BS 2000-491:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
| BS EN ISO 1517:1995* BS 3900-C2:1994 | Paints and varnishes. Surface-drying test. Ballotini method |
| BS EN ISO 15181-1:2004* BS 3900-K1:2001 | Paints and varnishes. Determination of release rate of biocides from antifouling paints. General method for extraction of biocides |
| BS EN ISO 15181-1:2007 | Paints and varnishes. Determination of release rate of biocides from antifouling paints. General method for extraction of biocides |
| BS EN ISO 15181-2:2004* BS 3900-K2:2001 | Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of copper-ion concentration in the extract and calculation of the release rate |
| BS EN ISO 15181-2:2007 | Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of copper-ion concentration in the extract and calculation of the release rate |
| BS EN ISO 15181-3:2007* BS 3900-K3:2007 | Paints and varnishes. Determination of release rate of biocides from antifouling paints. Calculation of the zinc ethylene-bis (dithiocarbamate)(zineb) release rate by determination of the concentration of ethylenethiourea in the extract |
| BS EN ISO 15181-4:2008* BS 3900-K4:2008 | Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of pyridine-triphenylborane (PTPB) concentration in the extract and calculation of the release rate |
| BS EN ISO 15181-5:2008* BS 3900-K5:2008 | Paints and varnishes. Determination of release rate of biocides from antifouling paints. Calculation of the tolylfluanid and dichlofluanid release rate by determination of the concentration of dimethyltolylsulfamide (DMST) and dimethylphenylsulfamide (DMSA) in the extract |
| BS EN ISO 1518:2001 | Paints and varnishes. Scratch test |
| BS EN ISO 1519:1995* BS 3900-E1:1995 | Paints and varnishes. Bend test (cylindrical mandrel) |
| BS EN ISO 1519:2002* BS 3900-E1:2002 | Paints and varnishes. Bend test (cylindrical mandrel) |
| BS EN ISO 1520:1995* BS 3900-E4:1995 | Paints and varnishes. Cupping test |
| BS EN ISO 1520:2001 | Paints and varnishes. Cupping test |
| BS EN ISO 1520:2006 | Paints and varnishes. Cupping test |
| BS EN ISO 1522:2001* BS 3900-E5:1998 | Paints and varnishes. Pendulum damping test |
| BS EN ISO 1522:2006 | Paints and varnishes. Pendulum damping test |
| BS EN ISO 1523:2002* BS 2000-492:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
| BS EN ISO 1524:2002* BS 3900-C6:2000 | Paints, varnishes and printing inks. Determination of fineness of grind |
| BS EN ISO 15528:2000 | Paints, varnishes and raw materials for paints and varnishes. Sampling |
| BS EN ISO 15710:2006 | Paints and varnishes. Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution |
| BS EN ISO 15711:2004 | Paints and varnishes. Determination of resistance to cathodic disbonding of coatings exposed to sea water |
| BS EN ISO 16773-1:2007 | Paints and varnishes. Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens. Terms and definitions |
| BS EN ISO 16773-2:2007 | Paints and varnishes. Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens. Collection of data |
| BS EN ISO 16805:2005 | Binders for paints and varnishes. Determination of glass transition temperature |
| BS EN ISO 16862:2006 | Paints and varnishes. Evaluation of sag resistance |
| BS EN ISO 17132:2007 | Paints and varnishes. T-bend test |
| BS EN ISO 17652-1:2003 | Welding. Test for shop primers in relation to welding and allied processes. General requirements |
| BS EN ISO 17652-2:2003 | Welding. Test for shop primers in relation to welding and allied processes. Welding properties of shop primers |
| BS EN ISO 17652-3:2003 | Welding. Test for shop primers in relation to welding and allied processes. Thermal cutting |
| BS EN ISO 17652-4:2003 | Welding. Test for shop primers in relation to welding and allied processes. Emission of fumes and gases |
| BS EN ISO 17872:2007 | Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| BS EN ISO 17895:2005 | Paints and varnishes. Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) |
| BS EN ISO 20566:2006 | Paints and varnishes. Determination of the scratch resistance of a coating system using a laboratory car-wash |
| BS EN ISO 20567-1:2006 | Paints and varnishes. Determination of stone-chip resistance of coatings. Multi-impact testing |
| BS EN ISO 20567-2:2006 | Paints and varnishes. Determination of stone-chip resistance of coatings. Single-impact test with a guided impact body |
| BS EN ISO 2114:2000* BS 2782-4:Method 432B:2000 | Plastics (polyester resins) and paints and varnishes (binders). Determination of partial acid value and total acid value |
| BS EN ISO 21227-1:2003 | Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging. General guidance |
| BS EN ISO 21227-2:2006 | Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging. Evaluation procedure for multi-impact stone-chipping test |
| BS EN ISO 21227-3:2007 | Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging. Evaluation of delamination and corrosion around a scribe |
| BS EN ISO 21227-4:2008 | Paints and varnishes. Evaluation of defects on coated surfaces using optical imaging. Evaluation of filiform corrosion |
| BS EN ISO 23811:2009 | Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate |
| BS EN ISO 2409:1995* BS 3900-E6:1992 | Paints and varnishes. Cross-cut test |
| BS EN ISO 2409:2007* BS 3900-E6:2007 | Paints and varnishes. Cross-cut test |
| BS EN ISO 2431:1996* BS 3900-A6:1996 | Paints and varnishes. Determination of flow time by use of flow cups |
| BS EN ISO 2808:2001* BS 3900-C5:1997 | Paints and varnishes. Determination of film thickness |
| BS EN ISO 2808:2007* BS 3900-C5:2007 | Paints and varnishes. Determination of film thickness |
| BS EN ISO 2810:2004 | Paints and varnishes. Natural weathering of coatings. Exposure and assessment |
| BS EN ISO 2811-1:2001* BS 3900-A19:1998 | Paints and varnishes. Determination of density. Pyknometer method |
| BS EN ISO 2811-2:2001* BS 3900-A20:1998 | Paints and varnishes. Determination of density. Immersed body (plummet) method |
| BS EN ISO 2811-3:2001* BS 3900-A21:1998 | Paints and varnishes. Determination of density. Oscillation method |
| BS EN ISO 2811-4:2001 | Paints and varnishes. Determination of density. Pressure cup method |
| BS EN ISO 2812-1:1995* BS 3900-G5:1993 | Paints and varnishes. Determination of resistance to liquids. General methods |
| BS EN ISO 2812-1:2007 | Paints and varnishes. Determination of resistance to liquids. Immersion in liquids other than water |
| BS EN ISO 2812-2:1995* BS 3900-G8:1993 | Paints and varnishes. Determination of resistance to liquids. Water immersion method |
| BS EN ISO 2812-2:2007 | Paints and varnishes. Determination of resistance to liquids. Water immersion method |
| BS EN ISO 2812-3:2007 | Paints and varnishes. Determination of resistance to liquids. Method using an absorbent medium |
| BS EN ISO 2812-4:2007 | Paints and varnishes. Determination of resistance to liquids. Spotting methods |
| BS EN ISO 2812-5:2007 | Paints and varnishes. Determination of resistance to liquids. Temperature-gradient oven method |
| BS EN ISO 2813:2000 | Paints and varnishes. Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° |
| BS EN ISO 2814:2006* BS 3900-D4:2006 | Paints and varnishes. Comparison of contrast ratio (hiding power) of paints of the same type and colour |
| BS EN ISO 2815:1998* BS 3900-E9:1976 | Paints and varnishes. Buchholz indentation test |
| BS EN ISO 2815:2003* BS 3900-E9:2003 | Paints and varnishes. Buchholz indentation test |
| BS EN ISO 2884-1:2006* BS 3900-A7-1:2006 | Paints and varnishes. Determination of viscosity using rotary viscometers. Cone-and-plate viscometer operated at a high rate of shear |
| BS EN ISO 2884-2:2006* BS 3900-A7-2:2003 | Paints and varnishes. Determination of viscosity using rotary viscometers. Disc or ball viscometer operated at a specified speed |
| BS EN ISO 3231:1998* BS 3900-F8:1993 | Paints and varnishes. Determination of resistance to humid atmospheres containing sulfur dioxide |
| BS EN ISO 3248:2001* BS 3900-G7:1998 | Paints and varnishes. Determination of the effect of heat |
| BS EN ISO 3251:1995* BS 3900-B18:1994 | Paints and varnishes. Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes |
| BS EN ISO 3251:2003* BS 3900-B18:2003 | Paints, varnishes and plastics. Determination of non-volatile-matter content |
| BS EN ISO 3251:2008 | Paints, varnishes and plastics. Determination of non- volatile-matter content |
| BS EN ISO 3668:2001* BS 3900-D1:1998 | Paints and varnishes. Visual comparison of the colour of paints |
| BS EN ISO 3678:1995* BS 3900-C8:1978 | Paints and varnishes. Print-free test |
| BS EN ISO 3679:2004* BS 2000-523:2004 | Methods of test for petroleum and its products. BS 2000-523. Determination of flash point. Rapid equilibrium closed cup method |
| BS EN ISO 3680:2004* BS 2000-524:2004 | Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
| BS EN ISO 4617:2000 | Paints and varnishes. List of equivalent terms |
| BS EN ISO 4618-2:2000 | Paints and varnishes. Terms and definitions for coating materials. Special terms relating to paint characteristics and properties |
| BS EN ISO 4618-3:2000 | Paints and varnishes. Terms and definitions for coating materials. Surface preparation and methods of application |
| BS EN ISO 4618:2006 | Paints and varnishes. Terms and definitions |
| BS EN ISO 4622:1995* BS 3900-C7:1993 | Paints and varnishes. Pressure test for stackability |
| BS EN ISO 4623-1:2002* BS 3900-F13:2002 | Paints and varnishes. Determination of resistance to filiform corrosion. Steel substrates |
| BS EN ISO 4623-2:2004* BS 3900-F20:2004 | Paints and varnishes. Determination of resistance to filiform corrosion. Aluminium substrates |
| BS EN ISO 4623:1995* BS 3900-F13:1986 | Paints and varnishes. Filiform corrosion test on steel |
| BS EN ISO 4624:2003* BS 3900-E10:2003 | Paints and varnishes. Pull-off test for adhesion |
| BS EN ISO 4628-10:2003* BS 3900-H10:2003 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of filiform corrosion |
| BS EN ISO 4628-1:2003* BS 3900-H1:2003 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. General introduction and designation system |
| BS EN ISO 4628-2:2003* BS 3900-H2:2003 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering |
| BS EN ISO 4628-3:2003* BS 3900-H3:2003 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of rusting |
| BS EN ISO 4628-4:2003* BS 3900-H4:2003 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of cracking |
| BS EN ISO 4628-5:2003* BS 3900-H5:2003 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking |
| BS EN ISO 4628-6:2001* BS 3900-H6:1991 | Paints and varnishes. Evaluation of degradation of paint coatings. Designation of intensity, quantity and size of common types of defect. Rating of degree of chalking by tape method |
| BS EN ISO 4628-6:2007* BS 3900-H6:2007 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by tape method |
| BS EN ISO 4628-7:2003* BS 3900-H7:2003 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by velvet method |
| BS EN ISO 4628-8:2005* BS 3900-H8:2005 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of delamination and corrosion around a scribe |
| BS EN ISO 6270-1:2001* BS 3900-F9:2001 | Paints and varnishes. Determination of resistance to humidity. Continuous condensation |
| BS EN ISO 6270-2:2005* BS 3900-F21:2005 | Paints and varnishes. Determination of resistance to humidity. Procedure for exposing test specimens in condensation-water atmospheres |
| BS EN ISO 6270:1995* BS 3900-F9:1982 | Paints and varnishes. Determination of resistance to humidity (continuous condensation) |
| BS EN ISO 6272-1:2004* BS 3900-E13:2004 | Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter |
| BS EN ISO 6272-2:2006 | Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling weight test, small-area indenter |
| BS EN ISO 6272:1994* BS 3900-E13:1993 | Paints and varnishes. Falling-weight test |
| BS EN ISO 6504-1:2006* BS 3900-D7:1983 | Paints and varnishes. Determination of hiding power. Kubelka-Munk method for white and light-coloured paints |
| BS EN ISO 6504-3:2007* BS 3900-D11:2007 | Paints and varnishes. Determination of hiding power. Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| BS EN ISO 6860:1995* BS 3900-E11:1985 | Paints and varnishes. Bend test (conical mandrel) |
| BS EN ISO 6860:2006* BS 3900-E11:2006 | Paints and varnishes. Bend test (conical mandrel) |
| BS EN ISO 7253:2001* BS 3900-F12:1997 | Paints and varnishes. Determination of resistance to neutral salt spray (fog) |
| BS EN ISO 7783-1:2000* BS 3900-G9:1996 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of water-vapour transmission rate of free films (dish method) |
| BS EN ISO 7783-2:1999 | Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination and classification of water-vapour transmission rate (permeability) |
| BS EN ISO 7784-1:2006* BS 3900-E14:2006 | Paints and varnishes. Determination of resistance to abrasion. Rotating abrasive-paper-covered wheel method |
| BS EN ISO 7784-2:2006* BS 3900-E15:2006 | Paints and varnishes. Determination of resistance to abrasion. Rotating abrasive rubber wheel method |
| BS EN ISO 7784-3:2006* BS 3900-E16:2000 | Paints and varnishes. Determination of resistance to abrasion. Reciprocating test panel method |
| BS EN ISO 8130-14:2004* BS 3900-J14:2004 | Coating powders. Terminology |
| BS EN ISO 8130-9:2000 | Coating powders. Sampling |
| BS EN ISO 9038:2003 | Test for sustained combustibility of liquids |
| BS EN ISO 9514:1995* BS 3900-A18:1993 | Paints and varnishes. Determination of the pot-life of liquid systems. Preparation and conditioning of samples and guidelines for testing |
| BS EN ISO 9514:2005 | Paints and varnishes. Determination of the pot life of multicomponent coating systems. Preparation and conditioning of samples and guidelines for testing |
| BS ISO 19334:2006 | Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis |
| BS X 37:2004 | Intumescent paint for aerospace purposes. Specification |
| BS X 38:2005 | Heat curing paint scheme for aerospace purposes. Specification |
| DD ENV 927-2:2000 | Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification |
