| BS 1243:1978 | Specification for metal ties for cavity wall construction |
| BS 1494-1:1964 | Specification for fixing accessories for building purposes Fixings for sheet, roof and wall coverings |
| BS 4315-2:1970 | Methods of test for resistance to air and water penetration. Permeable walling constructions (water penetration) |
| BS 4904:1978 | Specification for external cladding colours for building purposes |
| BS 493:1995 | Specification for airbricks and gratings for wall ventilation |
| BS 5234-1:1992 | Partitions (including matching linings). Code of practice for design and installation |
| BS 5234-2:1992 | Partitions (including matching linings). Specification for performance requirements for strength and robustness including methods of test |
| BS 5247-14:1975 | Code of practice for sheet roof and wall coverings. Corrugated asbestos-cement |
| BS 5262:1991 | Code of practice for external renderings |
| BS 5268-6.1:1996 | Structural use of timber. Code of practice for timber frame walls. Dwellings not exceeding seven storeys |
| BS 5268-6.2:2001 | Structural use of timber. Code of practice for timber frame walls. Buildings other than dwellings not exceeding four storeys |
| BS 5268:Part 6:Section 6.1:1988 | Structural use of timber. Code of practice for timber frame walls. Dwellings not exceeding three storeys |
| BS 5385-1:1995 | Wall and floor tiling. Code of practice for the design and installation of internal ceramic and natural stone wall tiling and mosaics in normal conditions |
| BS 5385-2:1991 | Wall and floor tiling. Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience tiles) |
| BS 5385-2:2006 | Wall and floor tiling. Design and installation of external ceramic and mosaic wall tiling in normal conditions. Code of practice |
| BS 5385-3:1989 | Wall and floor tiling. Code of practice for the design and installation of ceramic floor tiles and mosaics |
| BS 5385-3:2007 | Wall and floor tiling. Design and installation of internal and external ceramic floor tiles and mosaics in normal conditions. Code of practice |
| BS 5385-4:1992 | Wall and floor tiling. Code of practice for tiling and mosaics in specific conditions |
| BS 5385-4:2009 | Wall and floor tiling. Design and installation of ceramic and mosaic tiling in special conditions. Code of practice |
| BS 5385-5:1994 | Wall and floor tiling. Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings |
| BS 5385-5:2009 | Wall and floor tiling. Design and installation of terazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice |
| BS 5385:Part 1:1990 | Wall and floor tiling. Code of practice for the design and installation of internal ceramic wall tiling and mosaics in normal conditions |
| BS 5427-1:1996 | Code of practice for the use of profiled sheet for roof and wall cladding on buildings. Design |
| BS 5427:1976 | Code of practice for performance and loading criteria for profiled sheeting in building |
| BS 5642-2:1983 | Sills and copings. Specification for copings of precast concrete, cast stone, clayware, slate and natural stone |
| BS 5977-1:1981 | Lintels. Method for assessment of load |
| BS 5977-2:1983 | Lintels. Specification for prefabricated lintels |
| BS 6100-1.3.1:1992 | Glossary of building and civil engineering terms. General and miscellaneous. Walls and cladding |
| BS 6178-1:1990 | Joist hangers. Specification for joist hangers for building into masonry walls of domestic dwellings |
| BS 6232:Part 1:1982 | Thermal insulation of cavity walls by filling with blown man-made mineral fibre. Specification for the performance of installation systems |
| BS 6232:Part 2:1982 | Thermal insulation of cavity walls by filling with blown man-made mineral fibre. Code of practice for installation of blown man-made mineral fibre in cavity walls with masonry and/or concrete leaves |
| BS 6915:1988 | Specification for design and construction of fully supported lead sheet roof and wall coverings |
| BS 6915:2001 | Design and construction of fully supported lead sheet roof and wall coverings. Code of practice |
| BS 8103-2:1996 | Structural design of low-rise buildings. Code of practice for masonry walls for housing |
| BS 8103-2:2005 | Structural design of low rise buildings. Code of practice for masonry walls for housing |
| BS 8104:1992 | Code of practice for assessing exposure of walls to wind-driven rain |
| BS 8208-1:1985 | Guide to assessment of suitability of external cavity walls for filling with thermal insulants. Existing traditional cavity construction |
| BS 8212:1988 | Code of practice for dry lining and partitioning using gypsum plasterboard |
| BS 8212:1995 | Code of practice for dry lining and partitioning using gypsum plasterboard |
| BS 8219:2001 | Installation of sheet roof and wall coverings. Profiled fibre cement. Code of practice |
| BS 8297:1995 | Code of practice for design and installation of non-loadbearing precast concrete cladding |
| BS 8297:2000 | Code of practice for Design and installation of non-loadbearing precast concrete cladding |
| BS 8298:1989 | Code of practice for design and installation of natural stone cladding and lining |
| BS 8298:1994 | Code of practice for design and installation of natural stone cladding and lining |
| BS EN 12152:2002 | Curtain walling. Air permeability. Performance requirements and classification |
| BS EN 12153:2000 | Curtain walling. Air permeability. Test method |
| BS EN 12154:2000 | Curtain walling. Watertightness. Performance requirements and classification |
| BS EN 12155:2000 | Curtain walling. Watertightness. Laboratory test under static pressure |
| BS EN 12179:2000 | Curtain walling. Resistance to wind load. Test method |
| BS EN 13051:2001 | Curtain walling. Watertightness. Site test |
| BS EN 13116:2001 | Curtain walling. Resistance to wind load. Performance requirements |
| BS EN 13119:2007 | Curtain walling. Terminology |
| BS EN 13830:2003 | Curtain walling. Product standard |
| BS EN 13947:2006 | Thermal performance of curtain walling. Calculation of thermal transmittance |
| BS EN 14019:2004 | Curtain walling. Impact resistance. Performance requirements |
| BS EN 14024:2004 | Metal profiles with thermal barrier. Mechanical performance. Requirements, proof and tests for assessment |
| BS EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements |
| BS EN 14783:2006 | Fully supported metal sheet and strip for roofing, external cladding and internal lining. Product specification and requirements |
| BS EN 508-3:2000 | Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Stainless steel |
| BS EN 845-1:2001 | Specification for ancillary components for masonry. Ties, tension straps, hangers and brackets |
| BS EN 845-1:2003+A1:2008 | Specification for ancillary components for masonry. Ties, tension straps, hangers and brackets |
| BS EN 845-2:2001 | Specification for ancillary components for masonry. Lintels |
| BS EN 845-2:2003 | Specification for ancillary components for masonry. Lintels |
| BS EN 845-3:2001 | Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork |
| BS EN 845-3:2003+A1:2008 | Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork |
| BS EN 846-10:2000 | Methods of test for ancillary components for masonry. Determination of load capacity and load deflection characteristics of brackets |
| BS EN 846-11:2000 | Methods of test for ancillary components for masonry. Determination of dimensions and bow of lintels |
| BS EN 846-9:2000 | Methods of test for ancillary components for masonry. Determination of flexural resistance and shear resistance of lintels |
| CP 143-10:1973 | Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Galvanized corrugated steel. Metric units |
| CP 143-12:1970 | Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Copper. Metric units |
| CP 143-15:1973 | Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Aluminium. Metric units |
| CP 143-16:1974 | Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Semi-rigid asbestos bitumen sheet. Metric units |
| CP 143-1:1958 | Code of practice for sheet roof and wall coverings. Aluminium, corrugated and troughed |
| CP 143-5:1964 | Code of practice for sheet roof and wall coverings. Code of practice for sheet roof and wall coverings. Zinc |
| DD 140-1:1986 | Wall ties. Methods of test for mortar joint and timber frame connections |
| DD 140-2:1987 | Wall ties. Recommendations for design of wall ties |
| DD ENV 13050:2001 | Curtain walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray |
