IHS Logo IHS - The Source for Critical Information and Insight BSi Logo
British Standards Online Heading
How to subscribe to British Standards Online
  Need a quote from IHS?
  The British Standards Online service is available via subscription from IHS. To speak to an expert about this service, please call:
+44 (0)1344 328300 or complete the
form below

Request an IHS quote for
British Standards Online
 
IHS Logo

BSi Logo
The following lists the key subject areas for this British Standards module.
Click the links to view the associated British Standards for each area.

Home >
Construction in general ( Module 48 ) >

Concrete structures, Construction in general ( Module 48 )
BS 4449:1997Specification for carbon steel bars for the reinforcement of concrete
BS 4449:2005+A2:2009Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification
BS 4466:1989Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 4482:1985Specification for cold reduced steel wire for the reinforcement of concrete
BS 4482:2005Steel wire for the reinforcement of concrete products. Specification
BS 4483:1998Steel fabric for the reinforcement of concrete
BS 4483:2005Steel fabric for the reinforcement of concrete. Specification
BS 4485:Part 4:1975Water cooling towers. Structural design of cooling towers
BS 4486:1980Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
BS 5896:1980Specification for high tensile steel wire and strand for the prestressing of concrete
BS 6089:1981Guide to assessment of concrete strength in existing structures
BS 6744:1986Specification for austenitic stainless steel bars for the reinforcement of concrete
BS 6744:2001+A2:2009Stainless steel bars for the reinforcement of and use in concrete. Requirements and test methods
BS 7295-1:1990Fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete. Specification for coated bars
BS 7295-2:1990Fusion bonded epoxy coated carbon steel bars for the reinforcement of concrete. Specification for coatings
BS 8007:1987Code of practice for design of concrete structures for retaining aqueous liquids
BS 8110-1:1997Structural use of concrete. Code of practice for design and construction
BS 8110-2:1985Structural use of concrete. Code of practice for special circumstances
BS 8110-3:1985Structural use of concrete. Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns
BS 8110:Part 1:1985Structural use of concrete. Code of practice for design and construction
BS 8666:2000Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete
BS 8666:2005Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete. Specification
BS EN 1062-11:2002Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Methods of conditioning before testing
BS EN 1062-1:1997Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Classification
BS EN 1062-1:2004Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Classification
BS EN 1062-3:1999Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination and classification of liquid-water transmission rate (permeability)
BS EN 1062-6:2002Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of carbon dioxide permeability
BS EN 1062-7:2004Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of crack bridging properties
BS EN 12188:1999Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion steel-to-steel for characterization of structural bonding agents
BS EN 12189:1999Products and systems for the protection and repair of concrete structures. Test methods. Determination of open time
BS EN 12192-1:2002Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for dry components of premixed mortar
BS EN 12192-2:1999Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for fillers for polymer bonding agents
BS EN 12269-1:2000Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the ""beam test"". Short term test
BS EN 12269-2:2003Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the ""beam test"". Long term test
BS EN 12614:2004Products and systems for the protection and repair of concrete structures. Test methods. Determination of glass transition temperatures of polymers
BS EN 12615:1999Products and systems for the protection and repair of concrete structures. Test methods. Determination of slant shear strength
BS EN 12617-1:2003Products and systems for the protection and repair of concrete structures. Test methods. Determination of linear shrinkage for polymers and surface protection systems (SPS)
BS EN 12617-2:2004Products and systems for the protection and repair of concrete structures. Test methods. Shrinkage of crack injection products based on polymer binder: volumetric shrinkage
BS EN 12617-3:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of early age linear shrinkage for structural bonding agents
BS EN 12617-4:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of shrinkage and expansion
BS EN 12618-1:2003Products and systems for the protection and repair of concrete structures. Test methods. Adhesion and elongation capacity of injection products with limited ductility
BS EN 12618-2:2004Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling. Adhesion by tensile bond strength
BS EN 12618-3:2004Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling. Slant shear method
BS EN 12636:1999Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete
BS EN 12637-1:2004Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Compatibility with concrete
BS EN 12637-3:2003Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Effect of injection products on elastomers
BS EN 12696:2000Cathodic protection of steel in concrete
BS EN 13057:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption
BS EN 13062:2003Products and systems for the protection and repair of concrete structures. Test method. Determination of thixotropy of products for protection of reinforcement
BS EN 13294:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time
BS EN 13295:2004Products and systems for the protection and repair of concrete structures.Test methods. Determination of resistance to carbonation
BS EN 13391:2004Mechanical tests for post-tensioning systems
BS EN 13395-1:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of thixotropic mortars
BS EN 13395-2:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of grout or mortar
BS EN 13395-3:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of repair concrete
BS EN 13395-4:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Application of repair mortar overhead
BS EN 13396:2004Products and systems for the protection and repair of concrete structures. Test methods. Measurement of chloride ion ingress
BS EN 13412:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression
BS EN 13412:2006Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression
BS EN 13529:2003Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack
BS EN 13578:2003Products and systems for the protection and repair of concrete structures. Test method. Compatibility on wet concrete
BS EN 13579:2002Products and systems for the protection and repair of concrete structures. Test methods. Drying test for hydrophobic impregnation
BS EN 13580:2002Products and systems for the protection and repair of concrete structures. Test methods. Water absorption and resistance to alkali for hydrophobic impregnations
BS EN 13581:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress
BS EN 13584:2003Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products
BS EN 13687-1:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Freeze-thaw cycling with de-icing salt immersion
BS EN 13687-2:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thunder-shower cycling (thermal shock)
BS EN 13687-3:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Thermal cycling without de-icing salt impact
BS EN 13687-4:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Dry thermal cycling
BS EN 13687-5:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility. Resistance to temperature shock
BS EN 13733:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of the durability of structural bonding agents
BS EN 13791:2007Assessment of in-situ compressive strength in structures and pre-cast concrete components
BS EN 13894-1:2003Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. During cure
BS EN 13894-2:2002Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. After hardening
BS EN 14068:2003Products and systems for the protection and repair of concrete structures. Test methods. Determination of watertightness of injected cracks without movement in concrete
BS EN 14117:2004Products and systems for the protection and repair of concrete structures. Test methods. Determination of time of efflux of cementitious injection products
BS EN 14406:2004Products and systems for the protection and repair of concrete structures. Test methods. Determination of the expansion ratio and expansion evolution
BS EN 14497:2004Products and systems for the protection and repair of concrete structures. Test methods. Determination of the filtration stability
BS EN 14498:2004Products and systems for the protection and repair of concrete structures. Test methods. Volume and weight changes of injection products after air drying and water storage cycles
BS EN 1504-10:2003Products and systems for the protection and repair of concrete structures. Definitions. Requirements. Quality control and evaluation of conformity. Site application of products and systems and quality control of the works
BS EN 1504-1:1998Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Definitions
BS EN 1504-1:2005Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Definitions
BS EN 1504-2:2004Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Surface protection systems for concrete
BS EN 1504-3:2005Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Structural and non-structural repair
BS EN 1504-4:2004Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Structural bonding
BS EN 1504-5:2004Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Concrete injection
BS EN 1504-6:2006Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Anchoring of reinforcing steel bar
BS EN 1504-7:2006Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Reinforcement corrosion protection
BS EN 1504-8:2004Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. Quality control and evaluation of conformity
BS EN 1504-9:2008Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. General principles for use of products and systems
BS EN 15183:2006Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test
BS EN 15184:2006Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test)
BS EN 1542:1999Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull-off
BS EN 1543:1998Products and systems for the protection and repair of concrete structures. Test methods. Determination of tensile strength development for polymers
BS EN 1766:2000Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing
BS EN 1767:1999Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis
BS EN 1770:1998Products and systems for the protection and repair of concrete structures. Test methods. Determination of the coefficient of thermal expansion
BS EN 1771:2004Products and systems for the protection and repair of concrete structures. Test methods. Determination of injectability and splitting test
BS EN 1799:1999Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface
BS EN 1877-1:2000Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins. Determination of epoxy equivalent
BS EN 1877-2:2000Products and systems for the protection and repair of concrete structures. Test methods. Reactive functions related to epoxy resins. Determination of amine functions using the total basicity number
BS EN 1992-1-1:2004Eurocode 2: Design of concrete structures. General rules and rules for buildings
BS EN 1992-1-2:2004Eurocode 2. Design of concrete structures. General rules. Structural fire design
BS EN 1992-2:2005Eurocode 2. Design of concrete structures. Concrete bridges. Design and detailing rules
BS EN 1992-3:2006Eurocode 2. Design of concrete structures. Liquid retaining and containing structures
BS EN 1994-1-1:2004Eurocode 4. Design of composite steel and concrete structures. General rules and rules for buildings
BS EN 1994-1-2:2005Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design
BS EN 1994-2:2005Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges
BS EN 523:1997Steel strip sheaths for prestressing tendons. Terminology, requirements, quality control
BS EN 523:2003Steel strip sheaths for prestressing tendons. Terminology, requirements, quality control
BS EN 524-1:1997Steel strip sheaths for prestressing tendons. Test methods Determination of shape and dimensions
BS EN 524-2:1997Steel strip sheaths for prestressing tendons. Test methods Determination of flexural behaviour
BS EN 524-3:1997Steel strip sheaths for prestressing tendons. Test methods To-and-fro bending test
BS EN 524-4:1997Steel strip sheaths for prestressing tendons. Test methods Determination of lateral load resistance
BS EN 524-5:1997Steel strip sheaths for prestressing tendons. Test methods Determination of tensile load resistance
BS EN 524-6:1997Steel strip sheaths for prestressing tendons. Test methods Determination of leaktightness (determination of water loss)
CWA 14646:2003Requirements for the installation of post-tensioning kits for prestressing of structures and qualification of the specialist company and its personnel
DD CEN/TS 14038-1:2004Electrochemical realkalization and chloride extraction treatments for reinforced concrete. Realkalisation
DD CEN/TS 1992-4-1:2009Design of fastenings for use in concrete. General
DD CEN/TS 1992-4-2:2009Design of fastenings for use in concrete. Headed fasteners
DD CEN/TS 1992-4-3:2009Design of fastenings for use in concrete. Anchor channels
DD CEN/TS 1992-4-4:2009Design of fastenings for use in concrete. Post-installed fasteners. Mechanical systems
DD CEN/TS 1992-4-5:2009Design of fastenings for use in concrete. Post-installed fasteners. Chemical systems
DD ENV 10080:1996Steel for the reinforcement of concrete. Weldable ribbed reinforcing steel B500. Technical delivery conditions for bars, coils and welded fabric
DD ENV 13670-1:2000Execution of concrete structures. Common
DD ENV 1504-9:1997Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity. General principles for the use of products and systems
DD ENV 1992-1-1:1992Eurocode 2: Design of concrete structures. General rules for buildings (together with United Kingdom National Application Document)
DD ENV 1992-1-2:1996Eurocode 2: Design of concrete structures. General rules. Structural fire design (together with United Kingdom National Application Document)
DD ENV 1992-1-3:1996Eurocode 2: Design of concrete structures. General rules. Precast concrete elements and structures (together with United Kingdom National Application Document)
DD ENV 1992-1-4:1996Eurocode 2: Design of concrete structures. General rules. Lightweight aggregate concrete with closed structure (together with United Kingdom National Application Document)
DD ENV 1992-1-5:1996Eurocode 2: Design of concrete structures. General rules. Structures with unbonded and external prestressing tendons (together with United Kingdom National Application Document)
DD ENV 1992-1-6:1996Eurocode 2: Design of concrete structures. General rules. Plain concrete structures
DD ENV 1992-2:2001Eurocode 2: Design of concrete structures. Concrete bridges
DD ENV 1992-4:2000Eurocode 2: Design of concrete structures. Liquid retaining and containing structures (together with United Kingdom National Application Document)
KIT 182* BS EN 1992-1-2BS EN 1992-1-2 and UK National Annex kit. Eurocode 2. Design of concrete structures. General rules. Structural fire design
KIT 184* BS EN 1992-1-1BS EN 1992-1-1 and UK National Annex kit. Eurocode 2. Design of concrete structures. General rules and rules for buildings
NA to BS EN 1992-1-1:2004UK National Annex to Eurocode 2. Design of concrete structures. General rules and rules for buildings
NA to BS EN 1992-1-2:2004UK National Annex to Eurocode 2. Design of concrete structures. General rules. Structural fire design
NA to BS EN 1992-2:2005UK National Annex to Eurocode 2. Design of concrete structures. Concrete bridges. Design and detailing rules
NA to BS EN 1992-3:2006UK National Annex to Eurocode 2. Design of concrete structures. Liquid retaining and containment structures
NA to BS EN 1994-1-1:2004UK National Annex to Eurocode 4. Design of composite steel and concrete structures. General rules and rules for buildings
NA to BS EN 1994-1-2:2005UK National Annex to Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design
NA to BS EN 1994-2:2005UK National Annex to Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges
PD 6687-2:2008Recommendations for the design of structures to BS EN 1992-2:2005
PD 6687:2006Background paper to the UK National Annexes to BS EN 1992-1
PD 6696-2:2007Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2. Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges
PD CEN/TR 15177:2006Testing the freeze-thaw resistance of concrete. Internal structural damage
IHS experience – your advantage

IHS, formerly known as Technical Indexes, is one of the foremost providers of standards, regulatory, product and supplier information to industries worldwide including construction, health & safety, engineering, education, rail, energy, automotive, defence and many more. With over 45 years experience and more than 6000 customers based in the UK alone, IHS is the only company of its type providing access to several million pages of vital information.

The British Standard Service provided by IHS focuses on supplying you an established, authoritative, reliable and comprehensive information source.

How to subscribe to British Standards Online