| BS 2000-397:1995 | Methods of test for petroleum and its products. Recovery of bitumen binders. Dichloromethane extraction rotary film evaporator method |
| BS 2000-47:1993 | Methods of test for petroleum and its products. Solubility of bituminous binders |
| BS 3195-3:1987* EN 58:1984 | Methods for sampling petroleum products. Method for sampling bituminous binders |
| BS 3690-2:1989 | Bitumens for building and civil engineering. Specification for bitumens for industrial purposes |
| BS 3690-3:1990 | Bitumens for building and civil engineering. Specification for mixtures of bitumen with pitch, tar and Trinidad lake asphalt |
| BS 3712-1:1991 | Building and construction sealants. Methods of test for homogeneity, relative density and penetration |
| BS 3712-2:1973 | Building and construction sealants. Methods of test for seepage, staining, shrinkage, shelf life and paintability |
| BS 3712-3:1974 | Building and construction sealants. Methods of test for application life, skinning properties and tack-free time |
| BS 3712-4:1991 | Building and construction sealants. Method of test for adhesion in peel |
| BS 4016:1997 | Specification for flexible building membranes (breather type) |
| BS 4254:1983 | Specification for two-part polysulphide-based sealants |
| BS 5212-1:1990 | Cold applied joint sealant systems for concrete pavements. Specification for joint sealants |
| BS 5212-2:1990 | Cold applied joint sealant systems for concrete pavements. Code of practice for the application and use of joint sealants |
| BS 5212-3:1990 | Cold applied joint sealant systems for concrete pavements. Methods of test |
| BS 5215:1986 | Specification for one-part gun grade polysulphide-based sealants |
| BS 5270-1:1989 | Bonding agents for use with gypsum plasters and cement. Specification for polyvinyl acetate (PVAC) emulsion bonding agents for indoor use with gypsum building plasters |
| BS 5284:1993 | Methods of sampling and testing mastic asphalt used in building and civil engineering |
| BS 544:1969 | Specification for linseed oil putty for use in wooden frames |
| BS 5889:1989 | Specification for one-part gun grade silicone-based sealants |
| BS 6100-1.3.6:1991 | Glossary of building and civil engineering terms. General and miscellaneous. Parts of construction works. Jointing products, builders' hardware and accessories |
| BS 6100-6.1:1984 | Glossary of building and civil engineering terms. Concrete and plaster. Binders |
| BS 6213:1982 | Guide to selection of constructional sealants |
| BS 6213:2000 | Selection of construction sealants. Guide |
| BS 6463:Part 4:1987 | Quicklime, hydrated lime and natural calcium carbonate. Methods of test for physical properties of hydrated lime and lime putty |
| BS 6577:1985 | Specification for mastic asphalt for building (natural rock asphalt aggregate) |
| BS 6925:1988 | Specification for mastic asphalt for building and civil engineering (limestone aggregate) |
| BS 743:1970 | Specification for materials for damp-proof courses |
| BS 8449:2005 | Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures |
| BS EN 1107-1:2000 | Flexible sheets for waterproofing. Determination of dimensional stability. Bitumen sheets for roof waterproofing |
| BS EN 1107-2:2001 | Flexible sheets for waterproofing. Determination of dimensional stability. Plastic and rubber sheets for roof waterproofing |
| BS EN 1108:2000 | Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of form stability under cyclical temperature changes |
| BS EN 1109:2000 | Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flexibility at low temperature |
| BS EN 1110:2000 | Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature |
| BS EN 12039:2000 | Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of adhesion of granules |
| BS EN 12274-2:2003 | Slurry surfacing. Test methods. Determination of residual binder content |
| BS EN 12310-1:2000 | Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Bitumen sheets for roof waterproofing |
| BS EN 12310-2:2000 | Flexible sheets for waterproofing. Determination of resistance to tearing (nail shank). Plastic and rubber sheets for roof waterproofing |
| BS EN 12311-1:2000 | Flexible sheets for waterproofing. Determination of tensile properties. Bitumen sheets for roof waterproofing |
| BS EN 12311-2:2000 | Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing |
| BS EN 12316-1:2000 | Flexible sheets for waterproofing. Determination of peel resistance of joints. Bitumen sheets for roof waterproofing |
| BS EN 12316-2:2000 | Flexible sheets for waterproofing. Determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing |
| BS EN 12317-1:2000 | Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of shear resistance of joints |
| BS EN 12317-2:2000 | Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing |
| BS EN 12591:2000 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
| BS EN 12591:2009 | Bitumen and bituminous binders. Specifications for paving grade bitumens |
| BS EN 12592:2000* BS 2000-47:2000 | Methods of test for petroleum and its products. BS 2000-47 Bitumen and bituminous binders. Determination of solubility |
| BS EN 12592:2007* BS 2000-47:2007 | Bitumen and bituminous binders. Determination of solubility |
| BS EN 12593:2000* BS 2000-80:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the Fraass breaking point |
| BS EN 12593:2007* BS 2000-80:2007 | Bitumen and bituminous binders. Determination of the Fraass breaking point |
| BS EN 12594:2000* BS 2000-461:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Preparation of test samples |
| BS EN 12594:2007* BS 2000-461:2007 | Bitumen and bituminous binders. Preparation of test samples |
| BS EN 12595:2000* BS 2000-319:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of kinematic viscosity |
| BS EN 12595:2007* BS 2000-319:2007 | Bitumen and bituminous binders. Determination of kinematic viscosity |
| BS EN 12596:2000* BS 2000-222:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary |
| BS EN 12596:2007* BS 2000-222:2007 | Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary |
| BS EN 12597:2000 | Bitumen and bituminous binders. Terminology |
| BS EN 12606-1:2000* BS 2000-459.1:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation |
| BS EN 12606-1:2007* BS 2000-459.1:2007 | Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation |
| BS EN 12606-2:2000* BS 2000-459.2:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by extraction |
| BS EN 12607-1:2000* BS 2000-460.1:2000 | Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RTFOT method |
| BS EN 12607-1:2007* BS 2000-460.1:2007 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RTFOT method |
| BS EN 12607-2:2000* BS 2000-460.2:2000 | Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. TFOT Method |
| BS EN 12607-2:2007* BS 2000-460.2:2007 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. TFOT Method |
| BS EN 12607-3:2000* BS 2000-460.3:2000 | Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RFT Method |
| BS EN 12607-3:2007* BS 2000-460.3:2007 | Bitumen and bituminous binders. Determination of the resistance to hardening under influence of heat and air. RFT Method |
| BS EN 12691:2001 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact |
| BS EN 12691:2006 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to impact |
| BS EN 12697-13:2000 | Bituminous mixtures. Test methods for hot mix asphalt. Temperature measurement |
| BS EN 12697-14:2000 | Bituminous mixtures. Test methods for hot mix asphalt. Water content |
| BS EN 12697-15:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the segregation sensitivity |
| BS EN 12697-1:2000 | Bituminous mixtures. Test methods for hot mix asphalt. Soluble binder content |
| BS EN 12697-27:2001 | Bituminous mixtures. Test methods for hot mix asphalt. Sampling |
| BS EN 12697-28:2001 | Bituminous mixtures. Test methods for hot mix asphalt. Preparation of samples for determining binder content, water content and grading |
| BS EN 12697-29:2002 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the dimensions of a bituminous specimen |
| BS EN 12697-36:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Determination of the thickness of a bituminous pavement |
| BS EN 12697-37:2003 | Bituminous mixtures. Test methods for hot mix asphalt. Hot sand test for the adhesivity of binder on precoated chippings for HRA |
| BS EN 12697-3:2000 | Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery: Rotary evaporator |
| BS EN 12697-4:2000 | Bituminous mixtures. Test methods for hot mix asphalt. Bitumen recovery: Fractionating column |
| BS EN 12730:2001 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to static loading |
| BS EN 12846:2002* BS 2000-484:2003 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of efflux time of bitumen emulsions by the efflux viscometer method |
| BS EN 12847:2002* BS 2000-485:2003 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of settling tendency of bitumen emulsions |
| BS EN 12847:2009* BS 2000-485:2009 | Bitumen and bituminous binders. Determination of settling tendency of bituminous emulsions |
| BS EN 12848:2002* BS 2000-486:2003 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of mixing stability with cement of bitumen emulsions |
| BS EN 12848:2009* BS 2000-486:2009 | Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions |
| BS EN 12849:2002* BS 2000-487:2003 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of penetration power of bitumen emulsions |
| BS EN 12849:2009* BS 2000-487:2009 | Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions |
| BS EN 12850:2002* BS 2000-488:2003 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the pH value of bitumen emulsions |
| BS EN 12850:2009* BS 2000-488:2009 | Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions |
| BS EN 1296:2001 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roofing. Method of artificial ageing by long term exposure to elevated temperature |
| BS EN 12970:2000 | Mastic asphalt for waterproofing. Definitions, requirements and test methods |
| BS EN 1297:2004 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
| BS EN 13074:2002* BS 2000-493:2002 | Methods of test for petroleum and its products. Petroleum products. Bitumen and bituminous binders. Recovery of binder from bitumen emulsions by evaporation |
| BS EN 13075-1:2002* BS 2000-494:2002 | Methods of test for petroleum and its products. Determination of breaking value of cationic bitumen emulsions, mineral filler method |
| BS EN 13075-1:2009* BS 2000-494:2009 | Bitumen and bituminous binders. Determination of breaking behaviour. Determination of breaking value of cationic bituminous emulsions, mineral filler method |
| BS EN 13075-2:2002* BS 2000-495:2002 | Methods of test for petroleum and its products. Determination of fines mixing time of cationic bitumen emulsions |
| BS EN 13075-2:2009* BS 2000-495:2009 | Bitumen and bituminous binders. Determination of breaking behaviour. Determination of fines mixing time of cationic bitumen emulsions |
| BS EN 1308:1999 | Adhesives for tiles. Determination of slip |
| BS EN 13111:2001 | Flexible sheets for waterproofing. Underlays for discontinuous roofing and walls. Determination of resistance to water penetration |
| BS EN 13301:2003* BS 2000-504:2003 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of staining tendency of bitumens |
| BS EN 13302:2003* BS 2000-505:2003 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of viscosity of bitumen using a rotating spindle apparatus |
| BS EN 13303:2003* BS 2000-506:2003 | Methods of test for petroleum and its products. BS 2000-506. Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumens |
| BS EN 13303:2009* BS 2000-506:2009 | Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen |
| BS EN 13304:2003 | Bitumen and bituminous binders. Framework for specification of oxidised bitumens |
| BS EN 13304:2009 | Bitumen and bituminous binders. Framework for specification of oxidised bitumen |
| BS EN 13305:2003 | Bitumen and bituminous binders. Framework of specification of hard industrial bitumens |
| BS EN 13305:2009 | Bitumen and bituminous binders. Framework for specification of hard industrial bitumens |
| BS EN 13357:2002* BS 2000-502:2002 | Methods of test for petroleum and its products. BS 2000-502. Bitumen and bituminous binders. Determination of the efflux time of petroleum cut-back and fluxed bitumens |
| BS EN 13358:2004* BS 2000-525:2004 | Methods of test for petroleum and its products. BS 2000-525. Bitumen and bituminous binders. Determination of the distillation characteristics of petroleum cut-back bitumen products |
| BS EN 13361:2004 | Geosynthetic barriers. Characteristics required for use in the construction of reservoirs and dams |
| BS EN 13362:2005 | Geosynthetic barriers. Characteristics required for use in the construction of canals |
| BS EN 13375:2004 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Specimen preparation |
| BS EN 13398:2003* BS 2000-516:2003 | Methods of test for petroleum and its products. BS2000-516 Bitumen and bituminous binders. Determination of the elastic recovery of modified bitumen |
| BS EN 13399:2003* BS 2000-517:2003 | Methods of test for petroleum and its products. BS2000-517 Bitumen and bituminous binders. Determination of storage stability of modified bitumen |
| BS EN 13416:2001 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Rules for sampling |
| BS EN 13454-1:2004 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate. Definitions and requirements |
| BS EN 13454-2:2003 | Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate. Test methods |
| BS EN 13491:2004 | Geosynthetic barriers. Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures |
| BS EN 13493:2005 | Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites |
| BS EN 13583:2001 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of hail resistance |
| BS EN 13587:2003* BS 2000-519:2003 | Methods of test for petroleum and its products. BS 2000-519. Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method |
| BS EN 13588:2004* BS 2000-522:2004 | Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test |
| BS EN 13588:2008* BS 2000-522:2008 | Bitumen and bituminous binders. Determination of cohesion of bituminous binders with pendulum test |
| BS EN 13589:2003* BS 2000-520:2003 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method |
| BS EN 13589:2008* BS 2000-520:2008 | Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method |
| BS EN 13596:2004 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of bond strength |
| BS EN 13614:2004* BS 2000-521:2004 | Methods of test for petroleum and its products. BS 2000-521: Bitumen and bituminous binders. Determination of adhesivity of bitumen emulsions by water immersion test. Aggregate method |
| BS EN 13632:2003* BS 2000-518:2003 | Methods of test for petroleum and its products. BS2000-518 Bitumen and bituminous binders. Visualisation of polymer dispersion in polymer modified bitumen |
| BS EN 13653:2004 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of shear strength |
| BS EN 13702-1:2003* BS 2000-513:2003 | Methods of test for petroleum and its products. BS 2000-513. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen. Cone and plate method |
| BS EN 13702-2:2003* BS 2000-514:2003 | Methods of test for petroleum and its products. BS 2000-514. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen. Coaxial cylinders method |
| BS EN 13703:2003* BS 2000-515:2003 | Methods of test for petroleum and its products. BS 2000-515. Bitumen and bituminous binders. Determination of deformation energy |
| BS EN 13707:2004 | Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definition and characteristics |
| BS EN 13719:2002 | Geotextiles and geotextile-related products. Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers |
| BS EN 13733:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of the durability of structural bonding agents |
| BS EN 13738:2004 | Geotextiles and geotextile-related products. Determination of pullout resistance in soil |
| BS EN 13808:2005 | Bitumen and bituminous binders. Framework for specifying cationic bituminous emulsions |
| BS EN 13859-1:2005+A1:2008 | Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing |
| BS EN 13859-2:2004+A1:2008 | Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for walls |
| BS EN 13880-11:2003 | Hot applied joint sealants. Test method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements |
| BS EN 13880-3:2003 | Hot applied joint sealants. Test method for the determination of penetration and recovery (resilience) |
| BS EN 13880-4:2003 | Hot applied joint sealants. Test method for the determination of heat resistance. Change in penetration value |
| BS EN 13880-9:2003 | Hot applied joint sealants. Test method for the determination of compatibility with asphalt pavements |
| BS EN 13894-1:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading. During cure |
| BS EN 13897:2004 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness after stretching at low temperatures |
| BS EN 13948:2007 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of resistance to root penetration |
| BS EN 13956:2005 | Flexible sheet for waterproofing. Plastic and rubber sheets for roof waterproofing. Definitions and characteristics |
| BS EN 13967:2004+A1:2006 | Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics |
| BS EN 13969:2004 | Flexible sheets for waterproofing. Bitumen damp proof sheets including bitumen basement tanking sheets. Definitions and characteristics |
| BS EN 13970:2004 | Flexible sheets for waterproofing. Bitumen water vapour control layers. Definitions and characteristics |
| BS EN 13984:2004+A1:2006 | Flexible sheets for waterproofing. Plastic and rubber vapour control layers. Definitions and characteristics |
| BS EN 14016-1:2004 | Binders for magnesite screeds. Caustic magnesia and magnesium chloride. Definitions, requirements |
| BS EN 14016-2:2004 | Binders for magnesite screeds. Caustic magnesia and magnesium chloride. Test methods |
| BS EN 14150:2006 | Geosynthetic barriers. Determination of permeability to liquids |
| BS EN 14187-1:2003 | Cold applied joint sealants. Test method for the determination of rate of cure |
| BS EN 14187-2:2003 | Cold applied joint sealants. Test method for the determination of tack free time |
| BS EN 14187-4:2003 | Cold applied joint sealants. Test method for the determination of the change in mass and volume after immersion in test fuel |
| BS EN 14187-5:2003 | Cold applied joint sealants. Test method for the determination of the resistance to hydrolysis |
| BS EN 14187-6:2003 | Cold applied joint sealants. Test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids |
| BS EN 14187-7:2003 | Cold applied joint sealants. Test method for the determination of the resistance to flame |
| BS EN 14187-8:2003 | Cold applied joint sealants. Test method for the determination of the artificial weathering by UV-irradiation |
| BS EN 14188-3:2006 | Joint fillers and sealants. Specification for preformed joint seals |
| BS EN 14196:2003 | Geosynthetics. Test methods for measuring mass per unit area of clay geosynthetic barriers |
| BS EN 14223:2005 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of water absorption |
| BS EN 14224:2005 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of crack bridging ability |
| BS EN 14241-1:2005 | Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods. Seals in flue liners |
| BS EN 1425:2000* BS 2000-457:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Characterization of perceptible properties |
| BS EN 14262:2003 | Derivatives from coal pyrolysis. Coal tar and pitch based binders and related products. Briquetting pitch. Characteristics and test methods |
| BS EN 1426:2000* BS 2000-49:2000 | Methods of tests for petroleum and its products. Bitumen and bituminous binders. Determination of needle penetration |
| BS EN 1426:2007* BS 2000-49:2007 | Bitumen and bituminous binders. Determination of needle penetration |
| BS EN 1427:2000* BS 2000-58:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of softening point. Ring and ball method |
| BS EN 1427:2007* BS 2000-58:2007 | Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method |
| BS EN 1428:2000* BS 2000-291:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of water content in bitumen emulsions. Azeotropic distillation method |
| BS EN 1429:2000* BS 2000-91:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of residue on sieving of bitumen emulsions and determination of storage stability by sieving |
| BS EN 1429:2009* BS 2000-91:2009 | Bitumen and bituminous binders. Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving |
| BS EN 1430:2000* BS 2000-292:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of particle polarity of bitumen emulsions |
| BS EN 1430:2009* BS 2000-292:2009 | Bitumen and bituminous binders. Determination of particle polarity of bituminous emulsions |
| BS EN 1431:2000* BS 2000-458:2000 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of recovered binder and oil distillate from bitumen emulsions by distillation |
| BS EN 1431:2009* BS 2000-458:2009 | Bitumen and bituminous binders. Determination of residual binder and oil distillate from bitumen emulsions by distillation |
| BS EN 14575:2005 | Geosynthetic barriers. Screening test method for determining the resistance to oxidation |
| BS EN 14691:2005 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Compatibility by heat conditioning |
| BS EN 14692:2005 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the resistance to compaction of an asphalt layer |
| BS EN 14693:2006 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the behaviour of bitumen sheets during application of mastic asphalt |
| BS EN 14694:2005 | Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of resistance to dynamic water pressure after damage by pre-treatment |
| BS EN 14733:2005 | Bitumen and bituminous binders. Bituminous emulsions, fluxed and cut-back bitumen factory production control |
| BS EN 14769:2005* BS 2000-535:2005 | Methods of test for petroleum and its products. Bitumen and bituminousbi nders. Accelerated long-term ageing conditioning by a pressure ageingves sel (PAV) |
| BS EN 14770:2005* BS 2000-536:2005 | Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR) |
| BS EN 14771:2005* BS 2000-533:2005 | Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR) |
| BS EN 14895:2006* BS 2000-542:2006 | Bitumen and bituminous binders. Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders |
| BS EN 14896:2006* BS 2000-546:2006 | Bitumen and bituminous binders. Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders. Rotating spindle viscometer method |
| BS EN 14909:2006 | Flexible sheets for waterproofing. Plastic and rubber damp proof courses. Definitions and characteristics |
| BS EN 14967:2006 | Flexible sheets for waterproofing. Bitumen damp proof courses. Definitions and characteristics |
| BS EN 15322:2009 | Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders |
| BS EN 15323:2007* BS 2000-551:2007 | Bitumen and bituminous binders. Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT) |
| BS EN 15326:2007+A1:2009* BS 2000-549:2007 | Bitumen and bituminous binders. Measurement of density and specific Gravity. Capillary-stoppered pyknometer method |
| BS EN 15368:2008 | Hydraulic binder for non-structural applications. Definition, specifications and conformity criteria |
| BS EN 1548:2007 | Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Method for exposure to bitumen |
| BS EN 1844:2001 | Flexible sheets for waterproofing. Determination of resistance to ozone. Plastic and rubber sheets for roof waterproofing |
| BS EN 1847:2001 | Flexible sheets for waterproofing. Plastic and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals including water |
| BS EN 1848-1:2000 | Flexible sheets for waterproofing. Determination of length width and straightness. Bitumen sheets for roof waterproofing |
| BS EN 1848-2:2001 | Flexible sheets for waterproofing. Determination of length width and straightness. Plastic and rubber sheets for roof waterproofing |
| BS EN 1849-1:2000 | Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Bitumen sheets for roof waterproofing |
| BS EN 1849-2:2001 | Flexible sheets for waterproofing. Determination of thickness and mass per unit area. Plastic and rubber sheets for roof waterproofing |
| BS EN 1850-1:2000 | Flexible sheets for waterproofing. Determination of visible defects. Bitumen sheets for roof waterproofing |
| BS EN 1850-2:2001 | Flexible sheets for waterproofing. Determination of visible defects. Plastic and rubber sheets for roof waterproofing |
| BS EN 1928:2000 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness |
| BS EN 1931:2000 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties |
| BS EN 26927:1991* ISO 6927:1981 | Building construction. Jointing products. Sealants. Vocabulary |
| BS EN 27389:1991* ISO 7389:1987 | Building construction. Jointing products. Determination of elastic recovery |
| BS EN 27390:1991* ISO 7390:1987 | Building construction. Jointing products. Determination of resistance to flow |
| BS EN 28339:1991* ISO 8339:1984 | Building construction. Jointing products. Sealants. Determination of tensile properties |
| BS EN 28340:1991* ISO 8340:1984 | Building construction. Jointing products. Sealants. Determination of tensile properties at maintained extension |
| BS EN 28394:1991* ISO 8394:1988 | Building construction. Jointing products. Determination of extrudability of one-component sealants |
| BS EN 29046:1991* ISO 9046:1987 | Building construction. Sealants. Determination of adhesion/cohesion properties at constant temperature |
| BS EN 29048:1991* ISO 9048:1987 | Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus |
| BS EN 495-5:2001 | Flexible sheets for waterproofing. Determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing |
| BS EN 534:1998 | Corrugated bitumen sheets |
| BS EN 534:2006 | Corrugated bitumen sheets. Product specification and test methods |
| BS EN 544:1998 | Bitumen shingles with mineral and/or synthetic reinforcements |
| BS EN 544:2005 | Bitumen singles with mineral and/or synthetic reinforcements. Product secification and test methods |
| BS EN 58:2004* BS 2000-474:2004 | Bitumen and bituminous binders. Sampling bituminous binders |
| BS EN ISO 10563:1998 | Building construction. Sealants for joints. Determination of change in mass and volume |
| BS EN ISO 10563:2005 | Building construction. Sealants. Determination of change in mass and volume |
| BS EN ISO 10590:1998 | Building construction. Sealants. Determination of adhesion/cohesion properties at maintained extension after immersion in water |
| BS EN ISO 10590:2005 | Building construction. Sealants. Determination of tensile properties of sealants at maintained extension after immersion in water |
| BS EN ISO 10591:1998 | Building construction. Sealants. Determination of adhesion/cohesion properties after immersion in water |
| BS EN ISO 10591:2005 | Building construction. Sealants. Determination of adhesion/cohesion properties of sealants after immersion in water |
| BS EN ISO 11431:2002 | Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass |
| BS EN ISO 11432:1998 | Building construction. Sealants. Determination of resistance to compression |
| BS EN ISO 11432:2005 | Building construction. Sealants. Determination of resistance to compression |
| BS EN ISO 11600:2003 | Building construction. Jointing products. Classification and requirements for sealants |
| BS EN ISO 7389:2003 | Building construction. Jointing products. Determination of elastic recovery of sealants |
| BS EN ISO 7390:2003 | Building construction. Jointing products. Determination of resistance to flow of sealants |
| BS EN ISO 8339:2005 | Building construction. Sealants. Determination of tensile properties (extension to break) |
| BS EN ISO 8340:2005 | Building construction. Sealants. Determination of tensile properties at maintained extension |
| BS EN ISO 9046:2004 | Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at constant temperature |
| BS EN ISO 9047:1998 | Building construction. Sealants. Determination of adhesion/cohesion properties at variable temperatures |
| BS EN ISO 9047:2003 | Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at variable temperatures |
| BS ISO 11431:1993 | Building construction. Sealants. Determination of adhesion/cohesion properties after exposure to artificial light through glass |
| BS ISO 11600:1993 | Building construction. Sealants. Classification and requirements |
| BS ISO 11600:2002 | Building construction. Jointing products. Classification and requirements for sealants |
| BS ISO 13640:1999 | Building construction. Jointing products. Specifications for test substrates |
| BS ISO 16938-1:2008 | Building construction. Determination of the staining of porous substrates by sealants used in joints. Test with compression |
| BS ISO 16938-2:2008 | Building construction. Determination of the staining of porous substrates by sealants used in joints. Test without compression |
| BS ISO 3867:2001 | Composition cork. Expansion joint fillers. Test methods |
| BS ISO 3869:2001 | Composition cork. Expansion joint fillers. Specifications, packaging and marking |
| DD 232:2005 | Method for determination of the maximum binder content of bituminous mixtures without excessive binder drainage |
| DD 248:1999 | Determination of the hot storage stability of modified bitumen binders |
| DD CEN/TS 15324:2008 | Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode |
| DD CEN/TS 15325:2008 | Bitumen and bituminous binders. Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode |
