| BS 1014:1975 | Specification for pigments for Portland cement and Portland cement products |
| BS 1191-1:1973 | Specification for gypsum building plasters. Excluding premixed lightweight plasters |
| BS 1191-2:1973 | Specification for gypsum building plasters. Premixed lightweight plasters |
| BS 1230-1:1985 | Gypsum plasterboard. Specification for plasterboard excluding materials submitted to secondary operations |
| BS 12:1991 | Specification for Portland cement |
| BS 12:1996 | Specification for Portland cement |
| BS 1370:1979 | Specification for low heat Portland cement |
| BS 146:1991 | Specification for Portland blastfurnace cement |
| BS 146:1996 | Specification for Portland blastfurnace cements |
| BS 146:2002 | Specification for blastfurnace cements with strength properties outside the scope of BS EN 197-1 |
| BS 1881-131:1998 | Testing concrete. Methods for testing cement in a reference concrete |
| BS 3497:1979 | Specification for unimpregnated asbestos cement boards for electrical purposes |
| BS 3656:1981 | Specification for asbestos-cement pipes, joints and fittings for sewerage and drainage |
| BS 4022:1970 | Specification for prefabricated gypsum wallboard panels |
| BS 4027:1991 | Specification for sulfate-resisting Portland cement |
| BS 4027:1996 | Specification for sulfate-resisting Portland cement |
| BS 4246:1991 | Specification for high slag blastfurnace cement |
| BS 4246:1996 | Specification for high slag blastfurnace cement |
| BS 4248:1974 | Specification for supersulphated cement |
| BS 4248:2004 | Supersulfated cement |
| BS 4550-0:1978 | Methods of testing cement. General introduction |
| BS 4550-3.1:1978 | Methods of testing cement. Physical tests. Introduction |
| BS 4550-3.4:1978 | Methods of testing cement. Physical tests. Strength tests |
| BS 4550-3.8:1978 | Methods of testing cement. Physical tests. Test for heat of hydration |
| BS 4550-6:1978 | Methods of testing cement. Standard sand for mortar cubes |
| BS 4550:Part 2:1970 | Methods of testing cement. Chemical tests |
| BS 4550:Part 3:Section 3.5:1978 | Methods of testing cement. Physical tests. Determination of standard consistence |
| BS 4550:Part 3:Section 3.6:1978 | Methods of testing cement. Physical tests. Test for setting times |
| BS 4550:Part 4:1978 | Methods of testing cement. Standard coarse aggregate for concrete cubes |
| BS 4550:Part 5:1978 | Methods of testing cement. Standard sand for concrete cubes |
| BS 4551-1:1998 | Methods of testing mortars, screeds and plasters. Physical testing |
| BS 4551-2:1998 | Methods of testing mortars, screeds and plasters. Chemical analysis and aggregate grading |
| BS 4551:1980 | Methods of testing mortars, screeds and plasters |
| BS 4551:2005 | Mortar. Methods of test for mortar. Chemical analysis and physical testing |
| BS 4721:1981 | Specification for ready-mixed building mortars |
| BS 4887-1:1986 | Mortar admixtures. Specification for air-entraining (plasticizing) admixtures |
| BS 4887-2:1987 | Mortar admixtures. Specification for set retarding admixtures |
| BS 5075-1:1982 | Concrete admixtures. Specification for accelerating admixtures, retarding admixtures and water reducing admixtures |
| BS 5075-2:1982 | Concrete admixtures. Specification for air-entraining admixtures |
| BS 5075-3:1985 | Concrete admixtures. Specification for superplasticizing admixtures |
| BS 5224:1976 | Specification for masonry cement |
| BS 5224:1995 | Specification for masonry cement |
| BS 5262:1991 | Code of practice for external renderings |
| BS 5838-1:1980 | Specification for dry packaged cementitious mixes. Prepacked concrete mixes |
| BS 5838-2:1980 | Specification for dry packaged cementitious mixes. Prepacked mortar mixes |
| BS 6100-6.6.1:1992 | Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operations. Concrete and mortar |
| BS 6100-6.6.2:1990 | Glossary of building and civil engineering terms. Concrete and plaster. Products, applications and operations. Plaster |
| BS 6100-9:2007 | Building and civil engineering. Vocabulary. Work with concrete and plaster |
| BS 6319-10:1987 | Testing of resin and polymer/cement compositions for use in construction. Method for measurement of temperature of deflection under a bending stress |
| BS 6319-11:1993 | Testing of resin and polymer/cement compositions for use in construction. Methods for determination of creep in compression and in tension |
| BS 6319-12:1992 | Testing of resin and polymer/cement compositions for use in construction. Methods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion |
| BS 6319-1:1983 | Testing of resin and polymer/cement compositions for use in construction. Method for preparation of test specimens |
| BS 6319-2:1983 | Testing of resin and polymer/cement compositions for use in construction. Method for measurement of compressive strength |
| BS 6319-3:1990 | Testing of resin and polymer/cement compositions for use in construction. Methods for measurement of modulus of elasticity in flexure and flexural strength |
| BS 6319-4:1984 | Testing of resin and polymer/cement compositions for use in construction. Method for measurement of bond strength (slant shear method) |
| BS 6319-5:1984 | Testing of resin and polymer/cement compositions for use in construction. Methods for determination of density of hardened resin compositions |
| BS 6319-6:1984 | Testing of resin and polymer/cement compositions for use in construction. Method for determination of modulus of elasticity in compression |
| BS 6319-7:1985 | Testing of resin and polymer/cement compositions for use in construction. Method for measurement of tensile strength |
| BS 6319-8:1984 | Testing of resin and polymer/cement compositions for use in construction. Method for the assessment of resistance to liquids |
| BS 6319-9:1987 | Testing of resin and polymer/cement compositions for use in construction. Method for measurement and classification of peak exotherm temperature |
| BS 6463-101:1996 | Quicklime, hydrated lime and natural calcium carbonate. Methods for preparing samples for testing |
| BS 6463-102:2001 | Quicklime, hydrated lime and natural calcium carbonate. Methods for chemical analysis |
| BS 6463-103:1999 | Quicklime, hydrated lime and natural calcium carbonate. Methods for physical testing |
| BS 6463:Part 1:1984 | Quicklime, hydrated lime and natural calcium carbonate. Methods of sampling |
| BS 6588:1991 | Specification for Portland pulverized-fuel ash cements |
| BS 6588:1996 | Specification for Portland pulverized-fuel ash cements |
| BS 6610:1991 | Specification for Pozzolanic pulverized-fuel ash cement |
| BS 6610:1996 | Specification for Pozzolanic pulverized-fuel ash cement |
| BS 690:Part 4:1974 | Asbestos-cement slates and sheets. Slates |
| BS 7583:1992 | Specification for Portland limestone cement |
| BS 7583:1996 | Specification for Portland limestone cement |
| BS 7979:2001 | Specification for limestone fines for use with Portland cement |
| BS 8000:Part 10:1989 | Workmanship on building sites. Code of practice for plastering and rendering |
| BS 8212:1988 | Code of practice for dry lining and partitioning using gypsum plasterboard |
| BS 890:1972 | Specification for building limes |
| BS 890:1995 | Specification for building limes |
| BS 915-2:1972 | Specification for high alumina cement. Metric units |
| BS EN 1015-10:1999 | Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar |
| BS EN 1015-11:1999 | Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar |
| BS EN 1015-12:2000 | Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrates |
| BS EN 1015-17:2000 | Methods of test for mortar for masonry. Determination of water-soluble chloride content of fresh mortars |
| BS EN 1015-18:2002 | Methods of test for mortar for masonry. Determination of water absorption coefficient due to capillary action of hardened mortar |
| BS EN 1015-19:1999 | Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars |
| BS EN 1015-1:1999 | Methods of test for mortar for masonry. Determination of particle size distribution (by sieve analysis) |
| BS EN 1015-21:2002 | Methods of test for mortar for masonry. Determination of the compatibility of one-coat rendering mortars with substrates |
| BS EN 1015-2:1999 | Methods of test for mortar for masonry. Bulk sampling of mortars and preparation of test mortars |
| BS EN 1015-3:1999 | Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table) |
| BS EN 1015-4:1999 | Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by plunger penetration) |
| BS EN 1015-6:1999 | Methods of test for mortar for masonry. Determination of bulk density of fresh mortar |
| BS EN 1015-7:1999 | Methods of test for mortar for masonry. Determination of air content of fresh mortar |
| BS EN 1015-9:1999 | Methods of test for mortar for masonry. Determination of workable life and correction time of fresh mortar |
| BS EN 12002:1998 | Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts |
| BS EN 12002:2002 | Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts |
| BS EN 12002:2008 | Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts |
| BS EN 12003:1998 | Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives |
| BS EN 12003:2008 | Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives |
| BS EN 12004:2001 | Adhesives for tiles. Definitions and specifications |
| BS EN 12004:2007 | Adhesives for tiles. Requirements, evaluation of conformity, classification and designation |
| BS EN 12192-1:2002 | Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for dry components of premixed mortar |
| BS EN 12192-2:1999 | Products and systems for the protection and repair of concrete structures. Granulometry analysis. Test method for fillers for polymer bonding agents |
| BS EN 12808-1:1999 | Adhesives and grouts for tiles. Determination of chemical resistance of reaction resin mortars |
| BS EN 12808-1:2008 | Grouts for tiles. Determination of chemical resistance of reaction resin mortars |
| BS EN 12808-2:2002 | Adhesives and grouts for tiles. Determination of resistance to abrasion |
| BS EN 12808-2:2008 | Grouts for tiles. Determination of resistance to abrasion |
| BS EN 12808-3:2002 | Adhesives and grouts for tiles. Determination of flexural and compressive strength |
| BS EN 12808-3:2008 | Grouts for tiles. Determination of flexural and compressive strength |
| BS EN 12808-4:2002 | Adhesives and grouts for tiles. Determination of shrinkage |
| BS EN 12808-4:2009 | Grouts for tiles. Determination of shrinkage |
| BS EN 12808-5:2002 | Adhesives and grouts for tiles. Determination of water absorption |
| BS EN 12808-5:2008 | Grouts for tiles. Determination of water absorption |
| BS EN 12859:2001 | Gypsum blocks. Definitions, requirements and test methods |
| BS EN 12859:2008 | Gypsum blocks. Definitions, requirements and test methods |
| BS EN 12860:2001 | Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods |
| BS EN 12878:1999 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| BS EN 12878:2005 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
| BS EN 1308:2007 | Adhesives for tiles. Determination of slip |
| BS EN 1322:1999 | Adhesives for tiles. Definitions and terminology |
| BS EN 1323:1999 | Adhesives for tiles. Concrete slab for test |
| BS EN 1323:2007 | Adhesives for tiles. Concrete slabs for tests |
| BS EN 1324:1999 | Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives |
| BS EN 1324:2007 | Adhesives for tiles. Determination of shear adhesion strength of dispersion adhesives |
| BS EN 13279-1:2005 | Gypsum binders and gypsum plasters. Definitions and requirements |
| BS EN 13279-1:2008 | Gypsum binders and gypsum plasters. Definitions and requirements |
| BS EN 13279-2:2004 | Gypsum binders and gypsum plasters. Test methods |
| BS EN 13318:2000 | Screed material and floor screeds. Definitions |
| BS EN 13395-1:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of thixotropic mortars |
| BS EN 13395-2:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Test for flow of grout or mortar |
| BS EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability. Application of repair mortar overhead |
| BS EN 13454-1:2004 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate. Definitions and requirements |
| BS EN 13454-2:2003 | Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate. Test methods |
| BS EN 1346:1999 | Adhesives for tiles. Determination of open time |
| BS EN 1346:2007 | Adhesives for tiles. Determination of open time |
| BS EN 1347:1999 | Adhesives for tiles. Determination of wetting capability |
| BS EN 1347:2007 | Adhesives for tiles. Determination of wetting capability |
| BS EN 1348:1999 | Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives |
| BS EN 1348:2007 | Adhesives for tiles. Determination of tensile adhesion strength for cementitious adhesives |
| BS EN 13639:2002 | Determination of total organic carbon in limestone |
| BS EN 13658-1:2005 | Metal lath and beads. Definitions, requirements and test methods. Internal plastering |
| BS EN 13658-2:2005 | Metal lath and beads. Definitions, requirements and test methods. External rendering |
| BS EN 13813:2002 | Screed material and floor screeds. Screed material. Properties and requirements |
| BS EN 13815:2006 | Fibrous gypsum plaster casts. Definitions, requirements and test methods |
| BS EN 13888:2002 | Grouts for tiles. Definitions and specifications |
| BS EN 13888:2009 | Grout for tiles. Requirements, evaluation of conformity, classification and designation |
| BS EN 13892-1:2002 | Methods of test for screed materials. Sampling, making and curing specimens for test |
| BS EN 13892-2:2002 | Methods of test for screed materials. Determination of flexural and compressive strength |
| BS EN 13892-3:2004 | Methods of test for screed materials. Determination of wear resistance-Bohme |
| BS EN 13892-4:2002 | Methods of test for screed materials. Determination of wear resistance-BCA |
| BS EN 13892-5:2003 | Methods of test for screed materials. Determination of wear resistance to rolling wheel of screed material for wearing layer |
| BS EN 13892-6:2002 | Methods of test for screed materials. Determination of surface hardness |
| BS EN 13892-7:2003 | Methods of test for screed materials. Determination of wear resistance to rolling wheel of screed material with floor coverings |
| BS EN 13892-8:2002 | Methods of test for screed materials. Determination of bond strength |
| BS EN 13914-1:2005 | Design, preparation and application of external rendering and internal plastering. External rendering |
| BS EN 13914-2:2005 | Design, preparation and application of external rendering and internal plastering. Design considerations and essential principles for internal plastering |
| BS EN 13915:2007 | Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods |
| BS EN 13950:2005 | Gypsum plasterboard thermal/acoustic insulation composite panels. Definitions, requirements and test methods |
| BS EN 13963:2005 | Jointing materials for gypsum plasterboards. Definitions, requirements and test methods |
| BS EN 13971:2008 | Carbonate liming materials. Determination of reactivity. Potentiometric titration method with hydrochloric acid |
| BS EN 14190:2005 | Gypsum plasterboard products from reprocessing. Definitions, requirements and test methods |
| BS EN 14195:2005 | Metal framing components for gypsum plasterboard systems. Definitions, requirements and test methods |
| BS EN 14209:2005 | Preformed plasterboard cornices. Definitions, requirements and testmetho ds |
| BS EN 14216:2004 | Cement. Composition, specifications and conformity criteria for very low heat special cements |
| BS EN 14246:2006 | Gypsum elements for suspended ceilings. Definitions, requirements and test methods |
| BS EN 14353:2007 | Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods |
| BS EN 14496:2005 | Gypsum based adhesives for thermal/acoustic insulation composite panelsa nd plasterboards. Definitions, requirements and test methods |
| BS EN 14566:2008 | Mechanical fasteners for gypsum plasterboard systems. Definitions, requirements and test methods |
| BS EN 14647:2005 | Calcium aluminate cement. Composition, specifications and conformity criteria |
| BS EN 14944-3:2007 | Influence of cementitious products on water intended for human consumption. Test methods. Migration of substances from factory-made cementitious products |
| BS EN 15283-1:2008 | Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Gypsum boards with mat reinforcement |
| BS EN 15283-2:2008 | Gypsum boards with fibrous reinforcement. Definitions, requirements and test methods. Gypsum fibre boards |
| BS EN 15318:2007 | Design and application of gypsum blocks |
| BS EN 15319:2007 | General principles of design of fibrous (gypsum) plaster works |
| BS EN 15368:2008 | Hydraulic binder for non-structural applications. Definition, specifications and conformity criteria |
| BS EN 196-1:1995 | Methods of testing cement. Determination of strength |
| BS EN 196-1:2005 | Methods of testing cement. Determination of strength |
| BS EN 196-21:1992 | Methods of testing cement. Determination of the chloride, carbon dioxide and alkali content of cement |
| BS EN 196-2:1995 | Methods of testing cement. Chemical analysis of cement |
| BS EN 196-2:2005 | Methods of testing cement. Chemical analysis of cement |
| BS EN 196-3:1995 | Methods of testing cement. Determination of setting time and soundness |
| BS EN 196-3:2005 | Methods of testing cement. Determination of setting time and soundness |
| BS EN 196-5:1995 | Methods of testing cement. Pozzolanicity test for pozzolanic cements |
| BS EN 196-5:2005 | Methods of testing cement. Pozzolanicity test for pozzolanic cements |
| BS EN 196-6:1992 | Methods of testing cement. Determination of fineness |
| BS EN 196-7:1992 | Methods of testing cement. Methods of taking and preparing samples of cement |
| BS EN 196-7:2007 | Methods of testing cement. Methods of taking and preparing samples of cement |
| BS EN 196-8:2003 | Methods of testing cement. Heat of hydration. Solution method |
| BS EN 196-9:2003 | Methods of testing cement. Heat of hydration. Semi-adiabatic method |
| BS EN 197-1:2000 | Cement. Composition, specifications and conformity criteria for common cements |
| BS EN 197-2:2000 | Cement. Conformity evaluation |
| BS EN 197-4:2004 | Cement. Composition, specifications and conformity criteria for low early strength blastfurnace cements |
| BS EN 413-1:2004 | Masonry cement. Composition, specifications and conformity criteria |
| BS EN 413-2:1995 | Masonry cement. Test methods |
| BS EN 413-2:2005 | Masonry cement. Test methods |
| BS EN 445:1997 | Grout for prestressing tendons. Test methods |
| BS EN 445:2007 | Grout for prestressing tendons. Test methods |
| BS EN 446:1997 | Grout for prestressing tendons. Grouting procedures |
| BS EN 446:2007 | Grout for prestressing tendons. Grouting procedures |
| BS EN 447:1997 | Grout for prestressing tendons. Specification for common grout |
| BS EN 447:2007 | Grout for prestressing tendons. Basic requirements |
| BS EN 459-1:2001 | Building lime. Definitions, specifications and conformity criteria |
| BS EN 459-2:1995 | Building lime. Test methods |
| BS EN 459-2:2001 | Building lime. Test methods |
| BS EN 459-3:2001 | Building lime. Conformity evaluation |
| BS EN 480-10:1997 | Admixtures for concrete, mortar and grout. Test methods. Determination of water soluble chloride content |
| BS EN 480-12:1998 | Admixtures for concrete, mortar and grout. Test methods. Determination of the alkali content of admixtures |
| BS EN 480-12:2005 | Admixtures for concrete, mortar and grout. Test methods. Determination of the alkali content of admixtures |
| BS EN 480-13:2002 | Admixtures for concrete, mortar and grout. Test methods. Reference masonry mortar for testing mortar admixtures |
| BS EN 480-1:1998 | Admixtures for concrete, mortar and grout. Test methods. Reference concrete and reference mortar for testing |
| BS EN 480-2:1997 | Admixtures for concrete, mortar and grout. Test methods. Determination of setting time |
| BS EN 480-4:1997 | Admixtures for concrete, mortar and grout. Test methods. Determination of bleeding of concrete |
| BS EN 480-5:1997 | Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption |
| BS EN 480-5:2005 | Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption |
| BS EN 480-6:1997 | Admixtures for concrete, mortar and grout. Test methods. Infrared analysis |
| BS EN 480-6:2005 | Admixtures for concrete, mortar and grout. Test methods. Infrared analysis |
| BS EN 480-8:1997 | Admixtures for concrete, mortar and grout. Test methods. Determination of the conventional dry material content |
| BS EN 520:2004 | Gypsum plasterboards. Definitions, requirements and test methods |
| BS EN 934-3:2003 | Admixtures for concrete, mortar and grout. Admixtures for masonry mortar. Definitions, requirements, conformity, marking and labelling |
| BS EN 934-4:2000 | Admixtures for concrete, mortar and grout. Admixtures for grout for prestressing tendons. Definitions, requirements and conformity |
| BS EN 934-4:2001 | Admixtures for concrete, mortar and grout. Admixtures for grout for prestressing tendons. Definitions, requirements, conformity, marking and labelling |
| BS EN 934-6:2000 | Admixtures for concrete, mortar and grout. Sampling, conformity control, evaluation of conformity, marking and labelling |
| BS EN 934-6:2001 | Admixtures for concrete, mortar and grout. Sampling, conformity control and evaluation of conformity |
| BS EN 998-1:2003 | Specification for mortar for masonry. Rendering and plastering mortar |
| BS EN 998-2:2002 | Specification for mortar for masonry. Masonry mortar |
| BS EN 998-2:2003 | Specification for mortar for masonry. Masonry mortar |
| BS EN ISO 10426-1:2000 | Petroleum and natural gas industries. Cements and materials for well cementing. Specification |
| BS EN ISO 10426-1:2006 | Petroleum and natural gas industries. Cements and materials for well cementing. Specification |
| BS EN ISO 10426-2:2003 | Petroleum and natural gas industries. Cements and materials for well cementing. Testing of well cements |
| BS EN ISO 10426-3:2004 | Petroleum and natural gas industries. Cements and materials for well cementing. Testing of deepwater well cement formulations |
| BS EN ISO 10426-4:2004 | Petroleum and natural gas industries. Cements and materials for well cementing. Preparation and testing of foamed cement slurries at atmospheric pressure |
| BS EN ISO 10426-5:2005 | Petroleum and natural gas industries. Cements and materials for well cementing. Determination of shrinkage and expansion of well cement formulations at atmospheric pressure |
| BS EN ISO 10426-6:2008 | Petroleum and natural gas industries. Cements and materials for well cementing. Methods for determining the static gel strength of cement formulations (ISO 10426-6:2008) |
| DD ENV 1170-8:1997 | Precast concrete products. Test method for glass-fibre reinforced cement. Cyclic weathering type test |
| DD ENV 197-1:1995 | Cement. Composition, specifications and conformity criteria. Common cements |
| DD ENV 197-2:1996 | Cement. Conformity evaluation |
| DD ENV 413-1:1995 | Masonry cement. Specification |
| DD ENV 459-1:1995 | Building lime. Definitions, specifications and conformity criteria |
| PAS 109:2008 | Specification for the production of recycled gypsum from waste plasterboard |
| PD 6472:1974 | Guide to specifying the quality of building mortars |
| PD 6678:2005 | Guide to the specification of masonry mortar |
| PD CEN/TR 15225:2005 | Guidance on factory production control for the CE marking (attestationof conformity 2+) of designed masonry mortars |
| PD CEN/TR 15697:2008 | Cement. Performance testing for sulfate resistance. State of the art report |
| PD CEN/TR 196-4:2007 | Methods of testing cement. Quantitative determination of constituents |
| PD CR 13933:2000* CR 13933:2000 | Masonry cement. Testing for workability (cohesivity) |
| PD CR 14245:2001 | Guidelines for the application of EN 197-2. Conformity Evaluation |
